kernel-ark/drivers/net/sk98lin/Makefile
shemminger@osdl.org 35b8fcab1b [PATCH] sk98lin: remove /proc interface
Remove device specific proc interface. It doesn't handle
renames correctly; it ain't worth fixing.

Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01 02:22:52 -05:00

88 lines
2.7 KiB
Makefile

#
# Makefile for the SysKonnect SK-98xx device driver.
#
#
# Standalone driver params
# SKPARAM += -DSK_KERNEL_24
# SKPARAM += -DSK_KERNEL_24_26
# SKPARAM += -DSK_KERNEL_26
# SKPARAM += -DSK_KERNEL_22_24
obj-$(CONFIG_SK98LIN) += sk98lin.o
sk98lin-objs := \
skge.o \
skethtool.o \
skdim.o \
skaddr.o \
skgehwt.o \
skgeinit.o \
skgepnmi.o \
skgesirq.o \
ski2c.o \
sklm80.o \
skqueue.o \
skrlmt.o \
sktimer.o \
skvpd.o \
skxmac2.o
# DBGDEF = \
# -DDEBUG
ifdef DEBUG
DBGDEF += \
-DSK_DEBUG_CHKMOD=0x00000000L \
-DSK_DEBUG_CHKCAT=0x00000000L
endif
# **** possible debug modules for SK_DEBUG_CHKMOD *****************
# SK_DBGMOD_MERR 0x00000001L /* general module error indication */
# SK_DBGMOD_HWM 0x00000002L /* Hardware init module */
# SK_DBGMOD_RLMT 0x00000004L /* RLMT module */
# SK_DBGMOD_VPD 0x00000008L /* VPD module */
# SK_DBGMOD_I2C 0x00000010L /* I2C module */
# SK_DBGMOD_PNMI 0x00000020L /* PNMI module */
# SK_DBGMOD_CSUM 0x00000040L /* CSUM module */
# SK_DBGMOD_ADDR 0x00000080L /* ADDR module */
# SK_DBGMOD_DRV 0x00010000L /* DRV module */
# **** possible debug categories for SK_DEBUG_CHKCAT **************
# *** common modules ***
# SK_DBGCAT_INIT 0x00000001L module/driver initialization
# SK_DBGCAT_CTRL 0x00000002L controlling: add/rmv MCA/MAC and other controls (IOCTL)
# SK_DBGCAT_ERR 0x00000004L error handling paths
# SK_DBGCAT_TX 0x00000008L transmit path
# SK_DBGCAT_RX 0x00000010L receive path
# SK_DBGCAT_IRQ 0x00000020L general IRQ handling
# SK_DBGCAT_QUEUE 0x00000040L any queue management
# SK_DBGCAT_DUMP 0x00000080L large data output e.g. hex dump
# SK_DBGCAT_FATAL 0x00000100L large data output e.g. hex dump
# *** driver (file skge.c) ***
# SK_DBGCAT_DRV_ENTRY 0x00010000 entry points
# SK_DBGCAT_DRV_??? 0x00020000 not used
# SK_DBGCAT_DRV_MCA 0x00040000 multicast
# SK_DBGCAT_DRV_TX_PROGRESS 0x00080000 tx path
# SK_DBGCAT_DRV_RX_PROGRESS 0x00100000 rx path
# SK_DBGCAT_DRV_PROGRESS 0x00200000 general runtime
# SK_DBGCAT_DRV_??? 0x00400000 not used
# SK_DBGCAT_DRV_PROM 0x00800000 promiscuous mode
# SK_DBGCAT_DRV_TX_FRAME 0x01000000 display tx frames
# SK_DBGCAT_DRV_ERROR 0x02000000 error conditions
# SK_DBGCAT_DRV_INT_SRC 0x04000000 interrupts sources
# SK_DBGCAT_DRV_EVENT 0x08000000 driver events
EXTRA_CFLAGS += -Idrivers/net/sk98lin -DSK_DIAG_SUPPORT -DGENESIS -DYUKON $(DBGDEF) $(SKPARAM)
clean:
rm -f core *.o *.a *.s