kernel-ark/arch/i386/kernel/ioport.c
Stephane Eranian b3cf257623 [PATCH] i386: use thread_info flags for debug regs and IO bitmaps
Use thread info flags to track use of debug registers and IO bitmaps.

 - add TIF_DEBUG to track when debug registers are active
 - add TIF_IO_BITMAP to track when I/O bitmap is used
 - modify __switch_to() to use the new TIF flags

Performance tested on Pentium II, ten runs of LMbench context switch
benchmark (smaller is better:)

	before	after
avg	3.65	3.39
min	3.55	3.33

Signed-off-by: Stephane Eranian <eranian@hpl.hp.com>
Signed-off-by: Chuck Ebbert <76306.1226@compuserve.com>
Acked-by: Andi Kleen <ak@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-09 18:47:12 -07:00

154 lines
3.9 KiB
C

/*
* linux/arch/i386/kernel/ioport.c
*
* This contains the io-permission bitmap code - written by obz, with changes
* by Linus.
*/
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/ioport.h>
#include <linux/smp.h>
#include <linux/smp_lock.h>
#include <linux/stddef.h>
#include <linux/slab.h>
#include <linux/thread_info.h>
/* Set EXTENT bits starting at BASE in BITMAP to value TURN_ON. */
static void set_bitmap(unsigned long *bitmap, unsigned int base, unsigned int extent, int new_value)
{
unsigned long mask;
unsigned long *bitmap_base = bitmap + (base / BITS_PER_LONG);
unsigned int low_index = base & (BITS_PER_LONG-1);
int length = low_index + extent;
if (low_index != 0) {
mask = (~0UL << low_index);
if (length < BITS_PER_LONG)
mask &= ~(~0UL << length);
if (new_value)
*bitmap_base++ |= mask;
else
*bitmap_base++ &= ~mask;
length -= BITS_PER_LONG;
}
mask = (new_value ? ~0UL : 0UL);
while (length >= BITS_PER_LONG) {
*bitmap_base++ = mask;
length -= BITS_PER_LONG;
}
if (length > 0) {
mask = ~(~0UL << length);
if (new_value)
*bitmap_base++ |= mask;
else
*bitmap_base++ &= ~mask;
}
}
/*
* this changes the io permissions bitmap in the current task.
*/
asmlinkage long sys_ioperm(unsigned long from, unsigned long num, int turn_on)
{
unsigned long i, max_long, bytes, bytes_updated;
struct thread_struct * t = &current->thread;
struct tss_struct * tss;
unsigned long *bitmap;
if ((from + num <= from) || (from + num > IO_BITMAP_BITS))
return -EINVAL;
if (turn_on && !capable(CAP_SYS_RAWIO))
return -EPERM;
/*
* If it's the first ioperm() call in this thread's lifetime, set the
* IO bitmap up. ioperm() is much less timing critical than clone(),
* this is why we delay this operation until now:
*/
if (!t->io_bitmap_ptr) {
bitmap = kmalloc(IO_BITMAP_BYTES, GFP_KERNEL);
if (!bitmap)
return -ENOMEM;
memset(bitmap, 0xff, IO_BITMAP_BYTES);
t->io_bitmap_ptr = bitmap;
set_thread_flag(TIF_IO_BITMAP);
}
/*
* do it in the per-thread copy and in the TSS ...
*
* Disable preemption via get_cpu() - we must not switch away
* because the ->io_bitmap_max value must match the bitmap
* contents:
*/
tss = &per_cpu(init_tss, get_cpu());
set_bitmap(t->io_bitmap_ptr, from, num, !turn_on);
/*
* Search for a (possibly new) maximum. This is simple and stupid,
* to keep it obviously correct:
*/
max_long = 0;
for (i = 0; i < IO_BITMAP_LONGS; i++)
if (t->io_bitmap_ptr[i] != ~0UL)
max_long = i;
bytes = (max_long + 1) * sizeof(long);
bytes_updated = max(bytes, t->io_bitmap_max);
t->io_bitmap_max = bytes;
/*
* Sets the lazy trigger so that the next I/O operation will
* reload the correct bitmap.
* Reset the owner so that a process switch will not set
* tss->io_bitmap_base to IO_BITMAP_OFFSET.
*/
tss->io_bitmap_base = INVALID_IO_BITMAP_OFFSET_LAZY;
tss->io_bitmap_owner = NULL;
put_cpu();
return 0;
}
/*
* sys_iopl has to be used when you want to access the IO ports
* beyond the 0x3ff range: to get the full 65536 ports bitmapped
* you'd need 8kB of bitmaps/process, which is a bit excessive.
*
* Here we just change the eflags value on the stack: we allow
* only the super-user to do it. This depends on the stack-layout
* on system-call entry - see also fork() and the signal handling
* code.
*/
asmlinkage long sys_iopl(unsigned long unused)
{
volatile struct pt_regs * regs = (struct pt_regs *) &unused;
unsigned int level = regs->ebx;
unsigned int old = (regs->eflags >> 12) & 3;
struct thread_struct *t = &current->thread;
if (level > 3)
return -EINVAL;
/* Trying to gain more privileges? */
if (level > old) {
if (!capable(CAP_SYS_RAWIO))
return -EPERM;
}
t->iopl = level << 12;
regs->eflags = (regs->eflags & ~X86_EFLAGS_IOPL) | t->iopl;
set_iopl_mask(t->iopl);
return 0;
}