kernel-ark/drivers/net/bonding/bonding.h
Jay Vosburgh 169a3e6663 bonding: xor/802.3ad improved slave hash
Add support for alternate slave selection algorithms to bonding
balance-xor and 802.3ad modes.  Default mode (what we have now: xor of
MAC addresses) is "layer2", new choice is "layer3+4", using IP and port
information for hashing to select peer.

Originally submitted by Jason Gabler for balance-xor mode;
modified by Jay Vosburgh to additionally support 802.3ad mode.  Jason's
original comment is as follows:

The attached patch to the Linux Etherchannel Bonding driver modifies the
driver's "balance-xor" mode as follows:

      - alternate hashing policy support for mode 2
        * Added kernel parameter "xmit_policy" to allow the specification
          of different hashing policies for mode 2.  The original mode 2
          policy is the default, now found in xmit_hash_policy_layer2().
        * Added xmit_hash_policy_layer34()

This patch was inspired by hashing policies implemented by Cisco,
Foundry and IBM, which are explained in
Foundry documentation found at:
http://www.foundrynet.com/services/documentation/sribcg/Trunking.html#112750

Signed-off-by: Jason Gabler <jygabler@lbl.gov>
Signed-off-by: Jay Vosburgh <fubar@us.ibm.com>
2005-06-26 17:54:11 -04:00

261 lines
7.1 KiB
C

/*
* Bond several ethernet interfaces into a Cisco, running 'Etherchannel'.
*
* Portions are (c) Copyright 1995 Simon "Guru Aleph-Null" Janes
* NCM: Network and Communications Management, Inc.
*
* BUT, I'm the one who modified it for ethernet, so:
* (c) Copyright 1999, Thomas Davis, tadavis@lbl.gov
*
* This software may be used and distributed according to the terms
* of the GNU Public License, incorporated herein by reference.
*
*
* 2003/03/18 - Amir Noam <amir.noam at intel dot com>,
* Tsippy Mendelson <tsippy.mendelson at intel dot com> and
* Shmulik Hen <shmulik.hen at intel dot com>
* - Added support for IEEE 802.3ad Dynamic link aggregation mode.
*
* 2003/05/01 - Tsippy Mendelson <tsippy.mendelson at intel dot com> and
* Amir Noam <amir.noam at intel dot com>
* - Code beautification and style changes (mainly in comments).
*
* 2003/05/01 - Shmulik Hen <shmulik.hen at intel dot com>
* - Added support for Transmit load balancing mode.
*
* 2003/12/01 - Shmulik Hen <shmulik.hen at intel dot com>
* - Code cleanup and style changes
*
* 2005/05/05 - Jason Gabler <jygabler at lbl dot gov>
* - added "xmit_policy" kernel parameter for alternate hashing policy
* support for mode 2
*/
#ifndef _LINUX_BONDING_H
#define _LINUX_BONDING_H
#include <linux/timer.h>
#include <linux/proc_fs.h>
#include <linux/if_bonding.h>
#include "bond_3ad.h"
#include "bond_alb.h"
#define DRV_VERSION "2.6.3"
#define DRV_RELDATE "June 8, 2005"
#define DRV_NAME "bonding"
#define DRV_DESCRIPTION "Ethernet Channel Bonding Driver"
#define BOND_MAX_ARP_TARGETS 16
#ifdef BONDING_DEBUG
#define dprintk(fmt, args...) \
printk(KERN_DEBUG \
DRV_NAME ": %s() %d: " fmt, __FUNCTION__, __LINE__ , ## args )
#else
#define dprintk(fmt, args...)
#endif /* BONDING_DEBUG */
#define IS_UP(dev) \
((((dev)->flags & IFF_UP) == IFF_UP) && \
netif_running(dev) && \
netif_carrier_ok(dev))
/*
* Checks whether bond is ready for transmit.
*
* Caller must hold bond->lock
*/
#define BOND_IS_OK(bond) \
(((bond)->dev->flags & IFF_UP) && \
netif_running((bond)->dev) && \
((bond)->slave_cnt > 0))
/*
* Checks whether slave is ready for transmit.
*/
#define SLAVE_IS_OK(slave) \
(((slave)->dev->flags & IFF_UP) && \
netif_running((slave)->dev) && \
((slave)->link == BOND_LINK_UP) && \
((slave)->state == BOND_STATE_ACTIVE))
#define USES_PRIMARY(mode) \
(((mode) == BOND_MODE_ACTIVEBACKUP) || \
((mode) == BOND_MODE_TLB) || \
((mode) == BOND_MODE_ALB))
/*
* Less bad way to call ioctl from within the kernel; this needs to be
* done some other way to get the call out of interrupt context.
* Needs "ioctl" variable to be supplied by calling context.
*/
#define IOCTL(dev, arg, cmd) ({ \
int res = 0; \
mm_segment_t fs = get_fs(); \
set_fs(get_ds()); \
res = ioctl(dev, arg, cmd); \
set_fs(fs); \
res; })
/**
* bond_for_each_slave_from - iterate the slaves list from a starting point
* @bond: the bond holding this list.
* @pos: current slave.
* @cnt: counter for max number of moves
* @start: starting point.
*
* Caller must hold bond->lock
*/
#define bond_for_each_slave_from(bond, pos, cnt, start) \
for (cnt = 0, pos = start; \
cnt < (bond)->slave_cnt; \
cnt++, pos = (pos)->next)
/**
* bond_for_each_slave_from_to - iterate the slaves list from start point to stop point
* @bond: the bond holding this list.
* @pos: current slave.
* @cnt: counter for number max of moves
* @start: start point.
* @stop: stop point.
*
* Caller must hold bond->lock
*/
#define bond_for_each_slave_from_to(bond, pos, cnt, start, stop) \
for (cnt = 0, pos = start; \
((cnt < (bond)->slave_cnt) && (pos != (stop)->next)); \
cnt++, pos = (pos)->next)
/**
* bond_for_each_slave - iterate the slaves list from head
* @bond: the bond holding this list.
* @pos: current slave.
* @cnt: counter for max number of moves
*
* Caller must hold bond->lock
*/
#define bond_for_each_slave(bond, pos, cnt) \
bond_for_each_slave_from(bond, pos, cnt, (bond)->first_slave)
struct bond_params {
int mode;
int xmit_policy;
int miimon;
int arp_interval;
int use_carrier;
int updelay;
int downdelay;
int lacp_fast;
char primary[IFNAMSIZ];
u32 arp_targets[BOND_MAX_ARP_TARGETS];
};
struct vlan_entry {
struct list_head vlan_list;
u32 vlan_ip;
unsigned short vlan_id;
};
struct slave {
struct net_device *dev; /* first - usefull for panic debug */
struct slave *next;
struct slave *prev;
s16 delay;
u32 jiffies;
s8 link; /* one of BOND_LINK_XXXX */
s8 state; /* one of BOND_STATE_XXXX */
u32 original_flags;
u32 link_failure_count;
u16 speed;
u8 duplex;
u8 perm_hwaddr[ETH_ALEN];
struct ad_slave_info ad_info; /* HUGE - better to dynamically alloc */
struct tlb_slave_info tlb_info;
};
/*
* Here are the locking policies for the two bonding locks:
*
* 1) Get bond->lock when reading/writing slave list.
* 2) Get bond->curr_slave_lock when reading/writing bond->curr_active_slave.
* (It is unnecessary when the write-lock is put with bond->lock.)
* 3) When we lock with bond->curr_slave_lock, we must lock with bond->lock
* beforehand.
*/
struct bonding {
struct net_device *dev; /* first - usefull for panic debug */
struct slave *first_slave;
struct slave *curr_active_slave;
struct slave *current_arp_slave;
struct slave *primary_slave;
s32 slave_cnt; /* never change this value outside the attach/detach wrappers */
rwlock_t lock;
rwlock_t curr_slave_lock;
struct timer_list mii_timer;
struct timer_list arp_timer;
s8 kill_timers;
struct net_device_stats stats;
#ifdef CONFIG_PROC_FS
struct proc_dir_entry *proc_entry;
char proc_file_name[IFNAMSIZ];
#endif /* CONFIG_PROC_FS */
struct list_head bond_list;
struct dev_mc_list *mc_list;
int (*xmit_hash_policy)(struct sk_buff *, struct net_device *, int);
u32 master_ip;
u16 flags;
struct ad_bond_info ad_info;
struct alb_bond_info alb_info;
struct bond_params params;
struct list_head vlan_list;
struct vlan_group *vlgrp;
};
/**
* Returns NULL if the net_device does not belong to any of the bond's slaves
*
* Caller must hold bond lock for read
*/
extern inline struct slave *bond_get_slave_by_dev(struct bonding *bond, struct net_device *slave_dev)
{
struct slave *slave = NULL;
int i;
bond_for_each_slave(bond, slave, i) {
if (slave->dev == slave_dev) {
break;
}
}
return slave;
}
extern inline struct bonding *bond_get_bond_by_slave(struct slave *slave)
{
if (!slave || !slave->dev->master) {
return NULL;
}
return (struct bonding *)slave->dev->master->priv;
}
extern inline void bond_set_slave_inactive_flags(struct slave *slave)
{
slave->state = BOND_STATE_BACKUP;
slave->dev->flags |= IFF_NOARP;
}
extern inline void bond_set_slave_active_flags(struct slave *slave)
{
slave->state = BOND_STATE_ACTIVE;
slave->dev->flags &= ~IFF_NOARP;
}
struct vlan_entry *bond_next_vlan(struct bonding *bond, struct vlan_entry *curr);
int bond_dev_queue_xmit(struct bonding *bond, struct sk_buff *skb, struct net_device *slave_dev);
#endif /* _LINUX_BONDING_H */