kernel-ark/arch/arm/mach-pxa
Russell King e21e2d467a [ARM] pxa: lubbock: move mis-placed SPI info
The SPI information got placed in the middle of the SMC91x data.
Lets move it up a few lines so that we keep related things grouped
together.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19 11:29:08 +01:00
..
akita-ioexp.c i2c: normal_i2c can be made const (remaining drivers) 2008-01-27 18:14:47 +01:00
clock.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
clock.h
cm-x270-pci.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
cm-x270-pci.h
cm-x270.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
colibri.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
corgi_lcd.c [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix 2008-01-28 13:13:25 +00:00
corgi_pm.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
corgi_ssp.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
corgi.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
cpu-pxa.c [ARM] eliminate MODULE_PARM() usage 2008-02-29 22:47:17 +00:00
devices.c [ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info() 2008-04-19 11:29:05 +01:00
devices.h [ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info() 2008-04-19 11:29:05 +01:00
dma.c [ARM] replace remaining __FUNCTION__ occurrences 2008-03-06 12:18:18 +00:00
em-x270.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
eseries.c [ARM] 4649/1: Base support for pxa-based Toshiba e-series PDAs. 2008-01-28 13:13:13 +00:00
generic.c [ARM] pxa: move GPIO sysdev outside of generic.c into gpio.c 2008-04-19 11:29:04 +01:00
generic.h [ARM] pxa: move ARRAY_AND_SIZE definition to generic.h 2008-04-19 11:29:04 +01:00
gpio.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
gumstix.c [ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards 2008-04-19 11:29:06 +01:00
idp.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
irq.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
Kconfig [ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards 2008-04-19 11:29:06 +01:00
leds-idp.c
leds-lubbock.c
leds-mainstone.c
leds-trizeps4.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
leds.c
leds.h
littleton.c [ARM] pxa: add keypad support for littleton 2008-04-19 11:29:06 +01:00
lpd270.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
lubbock.c [ARM] pxa: lubbock: move mis-placed SPI info 2008-04-19 11:29:08 +01:00
magician.c [ARM] 4966/1: magician: add MFP pin configuration 2008-04-19 11:29:08 +01:00
mainstone.c [ARM] 4901/3: mainstone: Register primary I2C bus 2008-04-19 11:29:06 +01:00
Makefile [ARM] 4867/1: Adds flash, udc, mci support for gumstix F boards 2008-04-19 11:29:06 +01:00
Makefile.boot
mfp-pxa2xx.c [ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x} 2008-04-19 11:29:05 +01:00
mfp-pxa3xx.c [ARM] pxa: move mfp sysdev registeration out for suspend/resume order 2008-04-19 11:29:04 +01:00
pcm027.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
pcm990-baseboard.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
pm.c [ARM] pxa: skip registers saving/restoring if entering standby mode 2008-01-26 15:07:57 +00:00
poodle.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
pxa3xx.c [ARM] 4946/1: pxa3xx: Print an error if we refuse to suspend 2008-04-19 11:29:06 +01:00
pxa25x.c [ARM] pxa: allow dynamic enable/disable of GPIO wakeup for pxa{25x,27x} 2008-04-19 11:29:05 +01:00
pxa27x.c [ARM] pxa: add pxa27x_keypad device and pxa_set_keypad_info() 2008-04-19 11:29:05 +01:00
pxa300.c
pxa320.c
sharpsl_pm.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
sharpsl.h [ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix 2008-01-28 13:13:25 +00:00
sleep.S [ARM] pxa: add preliminary suspend/resume code for pxa3xx 2008-02-04 13:17:33 +00:00
smemc.c [ARM] pxa: introduce sysdev for pxa3xx static memory controller 2008-02-04 13:17:33 +00:00
spitz_pm.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
spitz.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
ssp.c Merge branch 'pxa-plat' into devel 2008-01-28 13:21:38 +00:00
standby.S [ARM] pxa: Add PXA3 standby code hooked into the IRQ wake scheme 2008-01-26 15:07:56 +00:00
time.c [ARM] pxa: fix PXA27x resume 2008-01-26 15:07:57 +00:00
tosa.c [ARM] 4970/1: tosa: correct gpio used for wake up. 2008-04-19 11:29:08 +01:00
trizeps4.c [ARM] pxa: separate GPIOs and their mode definitions to pxa2xx-gpio.h 2008-04-19 11:29:04 +01:00
zylonite_pxa300.c [ARM] pxa: move ARRAY_AND_SIZE definition to generic.h 2008-04-19 11:29:04 +01:00
zylonite_pxa320.c [ARM] pxa: move ARRAY_AND_SIZE definition to generic.h 2008-04-19 11:29:04 +01:00
zylonite.c [ARM] pxa: add keypad support for zylonite 2008-04-19 11:29:05 +01:00