kernel-ark/drivers/acpi/executer/exstore.c
Bob Moore b8e4d89357 [ACPI] ACPICA 20060127
Implemented support in the Resource Manager to allow
unresolved namestring references within resource package
objects for the _PRT method. This support is in addition
to the previously implemented unresolved reference
support within the AML parser. If the interpreter slack
mode is enabled (true on Linux unless acpi=strict),
these unresolved references will be passed through
to the caller as a NULL package entry.
http://bugzilla.kernel.org/show_bug.cgi?id=5741

Implemented and deployed new macros and functions for
error and warning messages across the subsystem. These
macros are simpler and generate less code than their
predecessors. The new macros ACPI_ERROR, ACPI_EXCEPTION,
ACPI_WARNING, and ACPI_INFO replace the ACPI_REPORT_*
macros.

Implemented the acpi_cpu_flags type to simplify host OS
integration of the Acquire/Release Lock OSL interfaces.
Suggested by Steven Rostedt and Andrew Morton.

Fixed a problem where Alias ASL operators are sometimes
not correctly resolved. causing AE_AML_INTERNAL
http://bugzilla.kernel.org/show_bug.cgi?id=5189
http://bugzilla.kernel.org/show_bug.cgi?id=5674

Fixed several problems with the implementation of the
ConcatenateResTemplate ASL operator. As per the ACPI
specification, zero length buffers are now treated as a
single EndTag. One-length buffers always cause a fatal
exception. Non-zero length buffers that do not end with
a full 2-byte EndTag cause a fatal exception.

Fixed a possible structure overwrite in the
AcpiGetObjectInfo external interface. (With assistance
from Thomas Renninger)

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2006-01-31 03:25:09 -05:00

651 lines
19 KiB
C

/******************************************************************************
*
* Module Name: exstore - AML Interpreter object store support
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2006, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include <acpi/acdispat.h>
#include <acpi/acinterp.h>
#include <acpi/amlcode.h>
#include <acpi/acnamesp.h>
#include <acpi/acparser.h>
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME("exstore")
/* Local prototypes */
static void
acpi_ex_do_debug_object(union acpi_operand_object *source_desc,
u32 level, u32 index);
static acpi_status
acpi_ex_store_object_to_index(union acpi_operand_object *val_desc,
union acpi_operand_object *dest_desc,
struct acpi_walk_state *walk_state);
/*******************************************************************************
*
* FUNCTION: acpi_ex_do_debug_object
*
* PARAMETERS: source_desc - Value to be stored
* Level - Indentation level (used for packages)
* Index - Current package element, zero if not pkg
*
* RETURN: None
*
* DESCRIPTION: Handles stores to the Debug Object.
*
******************************************************************************/
static void
acpi_ex_do_debug_object(union acpi_operand_object *source_desc,
u32 level, u32 index)
{
u32 i;
ACPI_FUNCTION_TRACE_PTR("ex_do_debug_object", source_desc);
ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "[ACPI Debug] %*s",
level, " "));
/* Display index for package output only */
if (index > 0) {
ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT,
"(%.2u) ", index - 1));
}
if (!source_desc) {
ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "<Null Object>\n"));
return_VOID;
}
if (ACPI_GET_DESCRIPTOR_TYPE(source_desc) == ACPI_DESC_TYPE_OPERAND) {
ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "%s: ",
acpi_ut_get_object_type_name
(source_desc)));
if (!acpi_ut_valid_internal_object(source_desc)) {
ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT,
"%p, Invalid Internal Object!\n",
source_desc));
return_VOID;
}
} else if (ACPI_GET_DESCRIPTOR_TYPE(source_desc) ==
ACPI_DESC_TYPE_NAMED) {
ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "%s: %p\n",
acpi_ut_get_type_name(((struct
acpi_namespace_node
*)source_desc)->
type),
source_desc));
return_VOID;
} else {
return_VOID;
}
switch (ACPI_GET_OBJECT_TYPE(source_desc)) {
case ACPI_TYPE_INTEGER:
/* Output correct integer width */
if (acpi_gbl_integer_byte_width == 4) {
ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "0x%8.8X\n",
(u32) source_desc->integer.
value));
} else {
ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT,
"0x%8.8X%8.8X\n",
ACPI_FORMAT_UINT64(source_desc->
integer.
value)));
}
break;
case ACPI_TYPE_BUFFER:
ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "[0x%.2X]\n",
(u32) source_desc->buffer.length));
ACPI_DUMP_BUFFER(source_desc->buffer.pointer,
(source_desc->buffer.length <
32) ? source_desc->buffer.length : 32);
break;
case ACPI_TYPE_STRING:
ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "[0x%.2X] \"%s\"\n",
source_desc->string.length,
source_desc->string.pointer));
break;
case ACPI_TYPE_PACKAGE:
ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT,
"[0x%.2X Elements]\n",
source_desc->package.count));
/* Output the entire contents of the package */
for (i = 0; i < source_desc->package.count; i++) {
acpi_ex_do_debug_object(source_desc->package.
elements[i], level + 4, i + 1);
}
break;
case ACPI_TYPE_LOCAL_REFERENCE:
if (source_desc->reference.opcode == AML_INDEX_OP) {
ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT,
"[%s, 0x%X]\n",
acpi_ps_get_opcode_name
(source_desc->reference.opcode),
source_desc->reference.offset));
} else {
ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "[%s]\n",
acpi_ps_get_opcode_name
(source_desc->reference.opcode)));
}
if (source_desc->reference.object) {
if (ACPI_GET_DESCRIPTOR_TYPE
(source_desc->reference.object) ==
ACPI_DESC_TYPE_NAMED) {
acpi_ex_do_debug_object(((struct
acpi_namespace_node *)
source_desc->reference.
object)->object,
level + 4, 0);
} else {
acpi_ex_do_debug_object(source_desc->reference.
object, level + 4, 0);
}
} else if (source_desc->reference.node) {
acpi_ex_do_debug_object((source_desc->reference.node)->
object, level + 4, 0);
}
break;
default:
ACPI_DEBUG_PRINT_RAW((ACPI_DB_DEBUG_OBJECT, "%p %s\n",
source_desc,
acpi_ut_get_object_type_name
(source_desc)));
break;
}
ACPI_DEBUG_PRINT_RAW((ACPI_DB_EXEC, "\n"));
return_VOID;
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_store
*
* PARAMETERS: *source_desc - Value to be stored
* *dest_desc - Where to store it. Must be an NS node
* or an union acpi_operand_object of type
* Reference;
* walk_state - Current walk state
*
* RETURN: Status
*
* DESCRIPTION: Store the value described by source_desc into the location
* described by dest_desc. Called by various interpreter
* functions to store the result of an operation into
* the destination operand -- not just simply the actual "Store"
* ASL operator.
*
******************************************************************************/
acpi_status
acpi_ex_store(union acpi_operand_object *source_desc,
union acpi_operand_object *dest_desc,
struct acpi_walk_state *walk_state)
{
acpi_status status = AE_OK;
union acpi_operand_object *ref_desc = dest_desc;
ACPI_FUNCTION_TRACE_PTR("ex_store", dest_desc);
/* Validate parameters */
if (!source_desc || !dest_desc) {
ACPI_ERROR((AE_INFO, "Null parameter"));
return_ACPI_STATUS(AE_AML_NO_OPERAND);
}
/* dest_desc can be either a namespace node or an ACPI object */
if (ACPI_GET_DESCRIPTOR_TYPE(dest_desc) == ACPI_DESC_TYPE_NAMED) {
/*
* Dest is a namespace node,
* Storing an object into a Named node.
*/
status = acpi_ex_store_object_to_node(source_desc,
(struct
acpi_namespace_node *)
dest_desc, walk_state,
ACPI_IMPLICIT_CONVERSION);
return_ACPI_STATUS(status);
}
/* Destination object must be a Reference or a Constant object */
switch (ACPI_GET_OBJECT_TYPE(dest_desc)) {
case ACPI_TYPE_LOCAL_REFERENCE:
break;
case ACPI_TYPE_INTEGER:
/* Allow stores to Constants -- a Noop as per ACPI spec */
if (dest_desc->common.flags & AOPOBJ_AML_CONSTANT) {
return_ACPI_STATUS(AE_OK);
}
/*lint -fallthrough */
default:
/* Destination is not a Reference object */
ACPI_ERROR((AE_INFO,
"Target is not a Reference or Constant object - %s [%p]",
acpi_ut_get_object_type_name(dest_desc),
dest_desc));
ACPI_DUMP_STACK_ENTRY(source_desc);
ACPI_DUMP_STACK_ENTRY(dest_desc);
ACPI_DUMP_OPERANDS(&dest_desc, ACPI_IMODE_EXECUTE, "ex_store",
2,
"Target is not a Reference or Constant object");
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
/*
* Examine the Reference opcode. These cases are handled:
*
* 1) Store to Name (Change the object associated with a name)
* 2) Store to an indexed area of a Buffer or Package
* 3) Store to a Method Local or Arg
* 4) Store to the debug object
*/
switch (ref_desc->reference.opcode) {
case AML_NAME_OP:
case AML_REF_OF_OP:
/* Storing an object into a Name "container" */
status = acpi_ex_store_object_to_node(source_desc,
ref_desc->reference.
object, walk_state,
ACPI_IMPLICIT_CONVERSION);
break;
case AML_INDEX_OP:
/* Storing to an Index (pointer into a packager or buffer) */
status =
acpi_ex_store_object_to_index(source_desc, ref_desc,
walk_state);
break;
case AML_LOCAL_OP:
case AML_ARG_OP:
/* Store to a method local/arg */
status =
acpi_ds_store_object_to_local(ref_desc->reference.opcode,
ref_desc->reference.offset,
source_desc, walk_state);
break;
case AML_DEBUG_OP:
/*
* Storing to the Debug object causes the value stored to be
* displayed and otherwise has no effect -- see ACPI Specification
*/
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"**** Write to Debug Object: Object %p %s ****:\n\n",
source_desc,
acpi_ut_get_object_type_name(source_desc)));
acpi_ex_do_debug_object(source_desc, 0, 0);
break;
default:
ACPI_ERROR((AE_INFO, "Unknown Reference opcode %X",
ref_desc->reference.opcode));
ACPI_DUMP_ENTRY(ref_desc, ACPI_LV_ERROR);
status = AE_AML_INTERNAL;
break;
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_store_object_to_index
*
* PARAMETERS: *source_desc - Value to be stored
* *dest_desc - Named object to receive the value
* walk_state - Current walk state
*
* RETURN: Status
*
* DESCRIPTION: Store the object to indexed Buffer or Package element
*
******************************************************************************/
static acpi_status
acpi_ex_store_object_to_index(union acpi_operand_object *source_desc,
union acpi_operand_object *index_desc,
struct acpi_walk_state *walk_state)
{
acpi_status status = AE_OK;
union acpi_operand_object *obj_desc;
union acpi_operand_object *new_desc;
u8 value = 0;
u32 i;
ACPI_FUNCTION_TRACE("ex_store_object_to_index");
/*
* Destination must be a reference pointer, and
* must point to either a buffer or a package
*/
switch (index_desc->reference.target_type) {
case ACPI_TYPE_PACKAGE:
/*
* Storing to a package element. Copy the object and replace
* any existing object with the new object. No implicit
* conversion is performed.
*
* The object at *(index_desc->Reference.Where) is the
* element within the package that is to be modified.
* The parent package object is at index_desc->Reference.Object
*/
obj_desc = *(index_desc->reference.where);
status =
acpi_ut_copy_iobject_to_iobject(source_desc, &new_desc,
walk_state);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
if (obj_desc) {
/* Decrement reference count by the ref count of the parent package */
for (i = 0; i < ((union acpi_operand_object *)
index_desc->reference.object)->common.
reference_count; i++) {
acpi_ut_remove_reference(obj_desc);
}
}
*(index_desc->reference.where) = new_desc;
/* Increment ref count by the ref count of the parent package-1 */
for (i = 1; i < ((union acpi_operand_object *)
index_desc->reference.object)->common.
reference_count; i++) {
acpi_ut_add_reference(new_desc);
}
break;
case ACPI_TYPE_BUFFER_FIELD:
/*
* Store into a Buffer or String (not actually a real buffer_field)
* at a location defined by an Index.
*
* The first 8-bit element of the source object is written to the
* 8-bit Buffer location defined by the Index destination object,
* according to the ACPI 2.0 specification.
*/
/*
* Make sure the target is a Buffer or String. An error should
* not happen here, since the reference_object was constructed
* by the INDEX_OP code.
*/
obj_desc = index_desc->reference.object;
if ((ACPI_GET_OBJECT_TYPE(obj_desc) != ACPI_TYPE_BUFFER) &&
(ACPI_GET_OBJECT_TYPE(obj_desc) != ACPI_TYPE_STRING)) {
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
/*
* The assignment of the individual elements will be slightly
* different for each source type.
*/
switch (ACPI_GET_OBJECT_TYPE(source_desc)) {
case ACPI_TYPE_INTEGER:
/* Use the least-significant byte of the integer */
value = (u8) (source_desc->integer.value);
break;
case ACPI_TYPE_BUFFER:
case ACPI_TYPE_STRING:
/* Note: Takes advantage of common string/buffer fields */
value = source_desc->buffer.pointer[0];
break;
default:
/* All other types are invalid */
ACPI_ERROR((AE_INFO,
"Source must be Integer/Buffer/String type, not %s",
acpi_ut_get_object_type_name(source_desc)));
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
/* Store the source value into the target buffer byte */
obj_desc->buffer.pointer[index_desc->reference.offset] = value;
break;
default:
ACPI_ERROR((AE_INFO,
"Target is not a Package or buffer_field"));
status = AE_AML_OPERAND_TYPE;
break;
}
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ex_store_object_to_node
*
* PARAMETERS: source_desc - Value to be stored
* Node - Named object to receive the value
* walk_state - Current walk state
* implicit_conversion - Perform implicit conversion (yes/no)
*
* RETURN: Status
*
* DESCRIPTION: Store the object to the named object.
*
* The Assignment of an object to a named object is handled here
* The value passed in will replace the current value (if any)
* with the input value.
*
* When storing into an object the data is converted to the
* target object type then stored in the object. This means
* that the target object type (for an initialized target) will
* not be changed by a store operation.
*
* Assumes parameters are already validated.
*
******************************************************************************/
acpi_status
acpi_ex_store_object_to_node(union acpi_operand_object *source_desc,
struct acpi_namespace_node *node,
struct acpi_walk_state *walk_state,
u8 implicit_conversion)
{
acpi_status status = AE_OK;
union acpi_operand_object *target_desc;
union acpi_operand_object *new_desc;
acpi_object_type target_type;
ACPI_FUNCTION_TRACE_PTR("ex_store_object_to_node", source_desc);
/* Get current type of the node, and object attached to Node */
target_type = acpi_ns_get_type(node);
target_desc = acpi_ns_get_attached_object(node);
ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Storing %p(%s) into node %p(%s)\n",
source_desc,
acpi_ut_get_object_type_name(source_desc), node,
acpi_ut_get_type_name(target_type)));
/*
* Resolve the source object to an actual value
* (If it is a reference object)
*/
status = acpi_ex_resolve_object(&source_desc, target_type, walk_state);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* If no implicit conversion, drop into the default case below */
if ((!implicit_conversion) || (walk_state->opcode == AML_COPY_OP)) {
/* Force execution of default (no implicit conversion) */
target_type = ACPI_TYPE_ANY;
}
/* Do the actual store operation */
switch (target_type) {
case ACPI_TYPE_BUFFER_FIELD:
case ACPI_TYPE_LOCAL_REGION_FIELD:
case ACPI_TYPE_LOCAL_BANK_FIELD:
case ACPI_TYPE_LOCAL_INDEX_FIELD:
/* For fields, copy the source data to the target field. */
status = acpi_ex_write_data_to_field(source_desc, target_desc,
&walk_state->result_obj);
break;
case ACPI_TYPE_INTEGER:
case ACPI_TYPE_STRING:
case ACPI_TYPE_BUFFER:
/*
* These target types are all of type Integer/String/Buffer, and
* therefore support implicit conversion before the store.
*
* Copy and/or convert the source object to a new target object
*/
status =
acpi_ex_store_object_to_object(source_desc, target_desc,
&new_desc, walk_state);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
if (new_desc != target_desc) {
/*
* Store the new new_desc as the new value of the Name, and set
* the Name's type to that of the value being stored in it.
* source_desc reference count is incremented by attach_object.
*
* Note: This may change the type of the node if an explicit store
* has been performed such that the node/object type has been
* changed.
*/
status =
acpi_ns_attach_object(node, new_desc,
new_desc->common.type);
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"Store %s into %s via Convert/Attach\n",
acpi_ut_get_object_type_name
(source_desc),
acpi_ut_get_object_type_name
(new_desc)));
}
break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
"Storing %s (%p) directly into node (%p) with no implicit conversion\n",
acpi_ut_get_object_type_name(source_desc),
source_desc, node));
/* No conversions for all other types. Just attach the source object */
status = acpi_ns_attach_object(node, source_desc,
ACPI_GET_OBJECT_TYPE
(source_desc));
break;
}
return_ACPI_STATUS(status);
}