kernel-ark/drivers/video/i810/i810-i2c.c
Tim Schmielau cd354f1ae7 [PATCH] remove many unneeded #includes of sched.h
After Al Viro (finally) succeeded in removing the sched.h #include in module.h
recently, it makes sense again to remove other superfluous sched.h includes.
There are quite a lot of files which include it but don't actually need
anything defined in there.  Presumably these includes were once needed for
macros that used to live in sched.h, but moved to other header files in the
course of cleaning it up.

To ease the pain, this time I did not fiddle with any header files and only
removed #includes from .c-files, which tend to cause less trouble.

Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha,
arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig,
allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all
configs in arch/arm/configs on arm.  I also checked that no new warnings were
introduced by the patch (actually, some warnings are removed that were emitted
by unnecessarily included header files).

Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-14 08:09:54 -08:00

172 lines
4.9 KiB
C

/*-*- linux-c -*-
* linux/drivers/video/i810-i2c.c -- Intel 810/815 I2C support
*
* Copyright (C) 2004 Antonino Daplas<adaplas@pol.net>
* All Rights Reserved
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/fb.h>
#include "i810.h"
#include "i810_regs.h"
#include "i810_main.h"
#include "../edid.h"
/* bit locations in the registers */
#define SCL_DIR_MASK 0x0001
#define SCL_DIR 0x0002
#define SCL_VAL_MASK 0x0004
#define SCL_VAL_OUT 0x0008
#define SCL_VAL_IN 0x0010
#define SDA_DIR_MASK 0x0100
#define SDA_DIR 0x0200
#define SDA_VAL_MASK 0x0400
#define SDA_VAL_OUT 0x0800
#define SDA_VAL_IN 0x1000
#define DEBUG /* define this for verbose EDID parsing output */
#ifdef DEBUG
#define DPRINTK(fmt, args...) printk(fmt,## args)
#else
#define DPRINTK(fmt, args...)
#endif
static void i810i2c_setscl(void *data, int state)
{
struct i810fb_i2c_chan *chan = data;
struct i810fb_par *par = chan->par;
u8 __iomem *mmio = par->mmio_start_virtual;
i810_writel(mmio, chan->ddc_base, (state ? SCL_VAL_OUT : 0) | SCL_DIR |
SCL_DIR_MASK | SCL_VAL_MASK);
i810_readl(mmio, chan->ddc_base); /* flush posted write */
}
static void i810i2c_setsda(void *data, int state)
{
struct i810fb_i2c_chan *chan = data;
struct i810fb_par *par = chan->par;
u8 __iomem *mmio = par->mmio_start_virtual;
i810_writel(mmio, chan->ddc_base, (state ? SDA_VAL_OUT : 0) | SDA_DIR |
SDA_DIR_MASK | SDA_VAL_MASK);
i810_readl(mmio, chan->ddc_base); /* flush posted write */
}
static int i810i2c_getscl(void *data)
{
struct i810fb_i2c_chan *chan = data;
struct i810fb_par *par = chan->par;
u8 __iomem *mmio = par->mmio_start_virtual;
i810_writel(mmio, chan->ddc_base, SCL_DIR_MASK);
i810_writel(mmio, chan->ddc_base, 0);
return ((i810_readl(mmio, chan->ddc_base) & SCL_VAL_IN) != 0);
}
static int i810i2c_getsda(void *data)
{
struct i810fb_i2c_chan *chan = data;
struct i810fb_par *par = chan->par;
u8 __iomem *mmio = par->mmio_start_virtual;
i810_writel(mmio, chan->ddc_base, SDA_DIR_MASK);
i810_writel(mmio, chan->ddc_base, 0);
return ((i810_readl(mmio, chan->ddc_base) & SDA_VAL_IN) != 0);
}
static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name)
{
int rc;
strcpy(chan->adapter.name, name);
chan->adapter.owner = THIS_MODULE;
chan->adapter.algo_data = &chan->algo;
chan->adapter.dev.parent = &chan->par->dev->dev;
chan->adapter.id = I2C_HW_B_I810;
chan->algo.setsda = i810i2c_setsda;
chan->algo.setscl = i810i2c_setscl;
chan->algo.getsda = i810i2c_getsda;
chan->algo.getscl = i810i2c_getscl;
chan->algo.udelay = 10;
chan->algo.timeout = (HZ/2);
chan->algo.data = chan;
i2c_set_adapdata(&chan->adapter, chan);
/* Raise SCL and SDA */
chan->algo.setsda(chan, 1);
chan->algo.setscl(chan, 1);
udelay(20);
rc = i2c_bit_add_bus(&chan->adapter);
if (rc == 0)
dev_dbg(&chan->par->dev->dev, "I2C bus %s registered.\n",name);
else {
dev_warn(&chan->par->dev->dev, "Failed to register I2C bus "
"%s.\n", name);
chan->par = NULL;
}
return rc;
}
void i810_create_i2c_busses(struct i810fb_par *par)
{
par->chan[0].par = par;
par->chan[1].par = par;
par->chan[2].par = par;
par->chan[0].ddc_base = GPIOA;
i810_setup_i2c_bus(&par->chan[0], "I810-DDC");
par->chan[1].ddc_base = GPIOB;
i810_setup_i2c_bus(&par->chan[1], "I810-I2C");
par->chan[2].ddc_base = GPIOC;
i810_setup_i2c_bus(&par->chan[2], "I810-GPIOC");
}
void i810_delete_i2c_busses(struct i810fb_par *par)
{
if (par->chan[0].par)
i2c_del_adapter(&par->chan[0].adapter);
par->chan[0].par = NULL;
if (par->chan[1].par)
i2c_del_adapter(&par->chan[1].adapter);
par->chan[1].par = NULL;
if (par->chan[2].par)
i2c_del_adapter(&par->chan[2].adapter);
par->chan[2].par = NULL;
}
int i810_probe_i2c_connector(struct fb_info *info, u8 **out_edid, int conn)
{
struct i810fb_par *par = info->par;
u8 *edid = NULL;
DPRINTK("i810-i2c: Probe DDC%i Bus\n", conn+1);
if (conn < par->ddc_num) {
edid = fb_ddc_read(&par->chan[conn].adapter);
} else {
const u8 *e = fb_firmware_edid(info->device);
if (e != NULL) {
DPRINTK("i810-i2c: Getting EDID from BIOS\n");
edid = kmemdup(e, EDID_LENGTH, GFP_KERNEL);
}
}
*out_edid = edid;
return (edid) ? 0 : 1;
}