kernel-ark/drivers/isdn/hisax/sedlbauer.c
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00

833 lines
24 KiB
C

/* $Id: sedlbauer.c,v 1.34.2.6 2004/01/24 20:47:24 keil Exp $
*
* low level stuff for Sedlbauer cards
* includes support for the Sedlbauer speed star (speed star II),
* support for the Sedlbauer speed fax+,
* support for the Sedlbauer ISDN-Controller PC/104 and
* support for the Sedlbauer speed pci
* derived from the original file asuscom.c from Karsten Keil
*
* Author Marcus Niemann
* Copyright by Marcus Niemann <niemann@www-bib.fh-bielefeld.de>
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
* Thanks to Karsten Keil
* Sedlbauer AG for informations
* Edgar Toernig
*
*/
/* Supported cards:
* Card: Chip: Configuration: Comment:
* ---------------------------------------------------------------------
* Speed Card ISAC_HSCX DIP-SWITCH
* Speed Win ISAC_HSCX ISAPNP
* Speed Fax+ ISAC_ISAR ISAPNP Full analog support
* Speed Star ISAC_HSCX CARDMGR
* Speed Win2 IPAC ISAPNP
* ISDN PC/104 IPAC DIP-SWITCH
* Speed Star2 IPAC CARDMGR
* Speed PCI IPAC PCI PNP
* Speed Fax+ ISAC_ISAR PCI PNP Full analog support
*
* Important:
* For the sedlbauer speed fax+ to work properly you have to download
* the firmware onto the card.
* For example: hisaxctrl <DriverID> 9 ISAR.BIN
*/
#include <linux/init.h>
#include "hisax.h"
#include "isac.h"
#include "ipac.h"
#include "hscx.h"
#include "isar.h"
#include "isdnl1.h"
#include <linux/pci.h>
#include <linux/isapnp.h>
extern const char *CardType[];
static const char *Sedlbauer_revision = "$Revision: 1.34.2.6 $";
static const char *Sedlbauer_Types[] =
{"None", "speed card/win", "speed star", "speed fax+",
"speed win II / ISDN PC/104", "speed star II", "speed pci",
"speed fax+ pyramid", "speed fax+ pci", "HST Saphir III"};
#define PCI_SUBVENDOR_SPEEDFAX_PYRAMID 0x51
#define PCI_SUBVENDOR_HST_SAPHIR3 0x52
#define PCI_SUBVENDOR_SEDLBAUER_PCI 0x53
#define PCI_SUBVENDOR_SPEEDFAX_PCI 0x54
#define PCI_SUB_ID_SEDLBAUER 0x01
#define SEDL_SPEED_CARD_WIN 1
#define SEDL_SPEED_STAR 2
#define SEDL_SPEED_FAX 3
#define SEDL_SPEED_WIN2_PC104 4
#define SEDL_SPEED_STAR2 5
#define SEDL_SPEED_PCI 6
#define SEDL_SPEEDFAX_PYRAMID 7
#define SEDL_SPEEDFAX_PCI 8
#define HST_SAPHIR3 9
#define SEDL_CHIP_TEST 0
#define SEDL_CHIP_ISAC_HSCX 1
#define SEDL_CHIP_ISAC_ISAR 2
#define SEDL_CHIP_IPAC 3
#define SEDL_BUS_ISA 1
#define SEDL_BUS_PCI 2
#define SEDL_BUS_PCMCIA 3
#define byteout(addr,val) outb(val,addr)
#define bytein(addr) inb(addr)
#define SEDL_HSCX_ISA_RESET_ON 0
#define SEDL_HSCX_ISA_RESET_OFF 1
#define SEDL_HSCX_ISA_ISAC 2
#define SEDL_HSCX_ISA_HSCX 3
#define SEDL_HSCX_ISA_ADR 4
#define SEDL_HSCX_PCMCIA_RESET 0
#define SEDL_HSCX_PCMCIA_ISAC 1
#define SEDL_HSCX_PCMCIA_HSCX 2
#define SEDL_HSCX_PCMCIA_ADR 4
#define SEDL_ISAR_ISA_ISAC 4
#define SEDL_ISAR_ISA_ISAR 6
#define SEDL_ISAR_ISA_ADR 8
#define SEDL_ISAR_ISA_ISAR_RESET_ON 10
#define SEDL_ISAR_ISA_ISAR_RESET_OFF 12
#define SEDL_IPAC_ANY_ADR 0
#define SEDL_IPAC_ANY_IPAC 2
#define SEDL_IPAC_PCI_BASE 0
#define SEDL_IPAC_PCI_ADR 0xc0
#define SEDL_IPAC_PCI_IPAC 0xc8
#define SEDL_ISAR_PCI_ADR 0xc8
#define SEDL_ISAR_PCI_ISAC 0xd0
#define SEDL_ISAR_PCI_ISAR 0xe0
#define SEDL_ISAR_PCI_ISAR_RESET_ON 0x01
#define SEDL_ISAR_PCI_ISAR_RESET_OFF 0x18
#define SEDL_ISAR_PCI_LED1 0x08
#define SEDL_ISAR_PCI_LED2 0x10
#define SEDL_RESET 0x3 /* same as DOS driver */
static inline u_char
readreg(unsigned int ale, unsigned int adr, u_char off)
{
register u_char ret;
byteout(ale, off);
ret = bytein(adr);
return (ret);
}
static inline void
readfifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
{
byteout(ale, off);
insb(adr, data, size);
}
static inline void
writereg(unsigned int ale, unsigned int adr, u_char off, u_char data)
{
byteout(ale, off);
byteout(adr, data);
}
static inline void
writefifo(unsigned int ale, unsigned int adr, u_char off, u_char * data, int size)
{
byteout(ale, off);
outsb(adr, data, size);
}
/* Interface functions */
static u_char
ReadISAC(struct IsdnCardState *cs, u_char offset)
{
return (readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset));
}
static void
WriteISAC(struct IsdnCardState *cs, u_char offset, u_char value)
{
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset, value);
}
static void
ReadISACfifo(struct IsdnCardState *cs, u_char * data, int size)
{
readfifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0, data, size);
}
static void
WriteISACfifo(struct IsdnCardState *cs, u_char * data, int size)
{
writefifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0, data, size);
}
static u_char
ReadISAC_IPAC(struct IsdnCardState *cs, u_char offset)
{
return (readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset|0x80));
}
static void
WriteISAC_IPAC(struct IsdnCardState *cs, u_char offset, u_char value)
{
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, offset|0x80, value);
}
static void
ReadISACfifo_IPAC(struct IsdnCardState *cs, u_char * data, int size)
{
readfifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0x80, data, size);
}
static void
WriteISACfifo_IPAC(struct IsdnCardState *cs, u_char * data, int size)
{
writefifo(cs->hw.sedl.adr, cs->hw.sedl.isac, 0x80, data, size);
}
static u_char
ReadHSCX(struct IsdnCardState *cs, int hscx, u_char offset)
{
return (readreg(cs->hw.sedl.adr,
cs->hw.sedl.hscx, offset + (hscx ? 0x40 : 0)));
}
static void
WriteHSCX(struct IsdnCardState *cs, int hscx, u_char offset, u_char value)
{
writereg(cs->hw.sedl.adr,
cs->hw.sedl.hscx, offset + (hscx ? 0x40 : 0), value);
}
/* ISAR access routines
* mode = 0 access with IRQ on
* mode = 1 access with IRQ off
* mode = 2 access with IRQ off and using last offset
*/
static u_char
ReadISAR(struct IsdnCardState *cs, int mode, u_char offset)
{
if (mode == 0)
return (readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, offset));
else if (mode == 1)
byteout(cs->hw.sedl.adr, offset);
return(bytein(cs->hw.sedl.hscx));
}
static void
WriteISAR(struct IsdnCardState *cs, int mode, u_char offset, u_char value)
{
if (mode == 0)
writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, offset, value);
else {
if (mode == 1)
byteout(cs->hw.sedl.adr, offset);
byteout(cs->hw.sedl.hscx, value);
}
}
/*
* fast interrupt HSCX stuff goes here
*/
#define READHSCX(cs, nr, reg) readreg(cs->hw.sedl.adr, \
cs->hw.sedl.hscx, reg + (nr ? 0x40 : 0))
#define WRITEHSCX(cs, nr, reg, data) writereg(cs->hw.sedl.adr, \
cs->hw.sedl.hscx, reg + (nr ? 0x40 : 0), data)
#define READHSCXFIFO(cs, nr, ptr, cnt) readfifo(cs->hw.sedl.adr, \
cs->hw.sedl.hscx, (nr ? 0x40 : 0), ptr, cnt)
#define WRITEHSCXFIFO(cs, nr, ptr, cnt) writefifo(cs->hw.sedl.adr, \
cs->hw.sedl.hscx, (nr ? 0x40 : 0), ptr, cnt)
#include "hscx_irq.c"
static irqreturn_t
sedlbauer_interrupt(int intno, void *dev_id)
{
struct IsdnCardState *cs = dev_id;
u_char val;
u_long flags;
spin_lock_irqsave(&cs->lock, flags);
if ((cs->hw.sedl.bus == SEDL_BUS_PCMCIA) && (*cs->busy_flag == 1)) {
/* The card tends to generate interrupts while being removed
causing us to just crash the kernel. bad. */
spin_unlock_irqrestore(&cs->lock, flags);
printk(KERN_WARNING "Sedlbauer: card not available!\n");
return IRQ_NONE;
}
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_ISTA + 0x40);
Start_HSCX:
if (val)
hscx_int_main(cs, val);
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
Start_ISAC:
if (val)
isac_interrupt(cs, val);
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_ISTA + 0x40);
if (val) {
if (cs->debug & L1_DEB_HSCX)
debugl1(cs, "HSCX IntStat after IntRoutine");
goto Start_HSCX;
}
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
if (val) {
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "ISAC IntStat after IntRoutine");
goto Start_ISAC;
}
writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_MASK, 0xFF);
writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_MASK + 0x40, 0xFF);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_MASK, 0xFF);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_MASK, 0x0);
writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_MASK, 0x0);
writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_MASK + 0x40, 0x0);
spin_unlock_irqrestore(&cs->lock, flags);
return IRQ_HANDLED;
}
static irqreturn_t
sedlbauer_interrupt_ipac(int intno, void *dev_id)
{
struct IsdnCardState *cs = dev_id;
u_char ista, val, icnt = 5;
u_long flags;
spin_lock_irqsave(&cs->lock, flags);
ista = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ISTA);
Start_IPAC:
if (cs->debug & L1_DEB_IPAC)
debugl1(cs, "IPAC ISTA %02X", ista);
if (ista & 0x0f) {
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, HSCX_ISTA + 0x40);
if (ista & 0x01)
val |= 0x01;
if (ista & 0x04)
val |= 0x02;
if (ista & 0x08)
val |= 0x04;
if (val)
hscx_int_main(cs, val);
}
if (ista & 0x20) {
val = 0xfe & readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA | 0x80);
if (val) {
isac_interrupt(cs, val);
}
}
if (ista & 0x10) {
val = 0x01;
isac_interrupt(cs, val);
}
ista = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ISTA);
if ((ista & 0x3f) && icnt) {
icnt--;
goto Start_IPAC;
}
if (!icnt)
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "Sedlbauer IRQ LOOP");
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_MASK, 0xFF);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_MASK, 0xC0);
spin_unlock_irqrestore(&cs->lock, flags);
return IRQ_HANDLED;
}
static irqreturn_t
sedlbauer_interrupt_isar(int intno, void *dev_id)
{
struct IsdnCardState *cs = dev_id;
u_char val;
int cnt = 5;
u_long flags;
spin_lock_irqsave(&cs->lock, flags);
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT);
Start_ISAR:
if (val & ISAR_IRQSTA)
isar_int_main(cs);
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
Start_ISAC:
if (val)
isac_interrupt(cs, val);
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT);
if ((val & ISAR_IRQSTA) && --cnt) {
if (cs->debug & L1_DEB_HSCX)
debugl1(cs, "ISAR IntStat after IntRoutine");
goto Start_ISAR;
}
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_ISTA);
if (val && --cnt) {
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "ISAC IntStat after IntRoutine");
goto Start_ISAC;
}
if (!cnt)
if (cs->debug & L1_DEB_ISAC)
debugl1(cs, "Sedlbauer IRQ LOOP");
writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT, 0);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_MASK, 0xFF);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, ISAC_MASK, 0x0);
writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx, ISAR_IRQBIT, ISAR_IRQMSK);
spin_unlock_irqrestore(&cs->lock, flags);
return IRQ_HANDLED;
}
static void
release_io_sedlbauer(struct IsdnCardState *cs)
{
int bytecnt = 8;
if (cs->subtyp == SEDL_SPEED_FAX) {
bytecnt = 16;
} else if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
bytecnt = 256;
}
if (cs->hw.sedl.cfg_reg)
release_region(cs->hw.sedl.cfg_reg, bytecnt);
}
static void
reset_sedlbauer(struct IsdnCardState *cs)
{
printk(KERN_INFO "Sedlbauer: resetting card\n");
if (!((cs->hw.sedl.bus == SEDL_BUS_PCMCIA) &&
(cs->hw.sedl.chip == SEDL_CHIP_ISAC_HSCX))) {
if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_POTA2, 0x20);
mdelay(2);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_POTA2, 0x0);
mdelay(10);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_CONF, 0x0);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ACFG, 0xff);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_AOE, 0x0);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_MASK, 0xc0);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_PCFG, 0x12);
} else if ((cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) &&
(cs->hw.sedl.bus == SEDL_BUS_PCI)) {
byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_on);
mdelay(2);
byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
mdelay(10);
} else {
byteout(cs->hw.sedl.reset_on, SEDL_RESET); /* Reset On */
mdelay(2);
byteout(cs->hw.sedl.reset_off, 0); /* Reset Off */
mdelay(10);
}
}
}
static int
Sedl_card_msg(struct IsdnCardState *cs, int mt, void *arg)
{
u_long flags;
switch (mt) {
case CARD_RESET:
spin_lock_irqsave(&cs->lock, flags);
reset_sedlbauer(cs);
spin_unlock_irqrestore(&cs->lock, flags);
return(0);
case CARD_RELEASE:
if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
spin_lock_irqsave(&cs->lock, flags);
writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
ISAR_IRQBIT, 0);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac,
ISAC_MASK, 0xFF);
reset_sedlbauer(cs);
writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
ISAR_IRQBIT, 0);
writereg(cs->hw.sedl.adr, cs->hw.sedl.isac,
ISAC_MASK, 0xFF);
spin_unlock_irqrestore(&cs->lock, flags);
}
release_io_sedlbauer(cs);
return(0);
case CARD_INIT:
spin_lock_irqsave(&cs->lock, flags);
reset_sedlbauer(cs);
if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
clear_pending_isac_ints(cs);
writereg(cs->hw.sedl.adr, cs->hw.sedl.hscx,
ISAR_IRQBIT, 0);
initisac(cs);
initisar(cs);
/* Reenable all IRQ */
cs->writeisac(cs, ISAC_MASK, 0);
/* RESET Receiver and Transmitter */
cs->writeisac(cs, ISAC_CMDR, 0x41);
} else {
inithscxisac(cs, 3);
}
spin_unlock_irqrestore(&cs->lock, flags);
return(0);
case CARD_TEST:
return(0);
case MDL_INFO_CONN:
if (cs->subtyp != SEDL_SPEEDFAX_PYRAMID)
return(0);
spin_lock_irqsave(&cs->lock, flags);
if ((long) arg)
cs->hw.sedl.reset_off &= ~SEDL_ISAR_PCI_LED2;
else
cs->hw.sedl.reset_off &= ~SEDL_ISAR_PCI_LED1;
byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
spin_unlock_irqrestore(&cs->lock, flags);
break;
case MDL_INFO_REL:
if (cs->subtyp != SEDL_SPEEDFAX_PYRAMID)
return(0);
spin_lock_irqsave(&cs->lock, flags);
if ((long) arg)
cs->hw.sedl.reset_off |= SEDL_ISAR_PCI_LED2;
else
cs->hw.sedl.reset_off |= SEDL_ISAR_PCI_LED1;
byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
spin_unlock_irqrestore(&cs->lock, flags);
break;
}
return(0);
}
static struct pci_dev *dev_sedl __devinitdata = NULL;
#ifdef __ISAPNP__
static struct isapnp_device_id sedl_ids[] __devinitdata = {
{ ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x01),
ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x01),
(unsigned long) "Speed win" },
{ ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x02),
ISAPNP_VENDOR('S', 'A', 'G'), ISAPNP_FUNCTION(0x02),
(unsigned long) "Speed Fax+" },
{ 0, }
};
static struct isapnp_device_id *ipid __devinitdata = &sedl_ids[0];
static struct pnp_card *pnp_c __devinitdata = NULL;
#endif
int __devinit
setup_sedlbauer(struct IsdnCard *card)
{
int bytecnt, ver, val;
struct IsdnCardState *cs = card->cs;
char tmp[64];
u16 sub_vendor_id, sub_id;
strcpy(tmp, Sedlbauer_revision);
printk(KERN_INFO "HiSax: Sedlbauer driver Rev. %s\n", HiSax_getrev(tmp));
if (cs->typ == ISDN_CTYPE_SEDLBAUER) {
cs->subtyp = SEDL_SPEED_CARD_WIN;
cs->hw.sedl.bus = SEDL_BUS_ISA;
cs->hw.sedl.chip = SEDL_CHIP_TEST;
} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_PCMCIA) {
cs->subtyp = SEDL_SPEED_STAR;
cs->hw.sedl.bus = SEDL_BUS_PCMCIA;
cs->hw.sedl.chip = SEDL_CHIP_TEST;
} else if (cs->typ == ISDN_CTYPE_SEDLBAUER_FAX) {
cs->subtyp = SEDL_SPEED_FAX;
cs->hw.sedl.bus = SEDL_BUS_ISA;
cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
} else
return (0);
bytecnt = 8;
if (card->para[1]) {
cs->hw.sedl.cfg_reg = card->para[1];
cs->irq = card->para[0];
if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
bytecnt = 16;
}
} else {
#ifdef __ISAPNP__
if (isapnp_present()) {
struct pnp_dev *pnp_d;
while(ipid->card_vendor) {
if ((pnp_c = pnp_find_card(ipid->card_vendor,
ipid->card_device, pnp_c))) {
pnp_d = NULL;
if ((pnp_d = pnp_find_dev(pnp_c,
ipid->vendor, ipid->function, pnp_d))) {
int err;
printk(KERN_INFO "HiSax: %s detected\n",
(char *)ipid->driver_data);
pnp_disable_dev(pnp_d);
err = pnp_activate_dev(pnp_d);
if (err<0) {
printk(KERN_WARNING "%s: pnp_activate_dev ret(%d)\n",
__FUNCTION__, err);
return(0);
}
card->para[1] = pnp_port_start(pnp_d, 0);
card->para[0] = pnp_irq(pnp_d, 0);
if (!card->para[0] || !card->para[1]) {
printk(KERN_ERR "Sedlbauer PnP:some resources are missing %ld/%lx\n",
card->para[0], card->para[1]);
pnp_disable_dev(pnp_d);
return(0);
}
cs->hw.sedl.cfg_reg = card->para[1];
cs->irq = card->para[0];
if (ipid->function == ISAPNP_FUNCTION(0x2)) {
cs->subtyp = SEDL_SPEED_FAX;
cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
bytecnt = 16;
} else {
cs->subtyp = SEDL_SPEED_CARD_WIN;
cs->hw.sedl.chip = SEDL_CHIP_TEST;
}
goto ready;
} else {
printk(KERN_ERR "Sedlbauer PnP: PnP error card found, no device\n");
return(0);
}
}
ipid++;
pnp_c = NULL;
}
if (!ipid->card_vendor) {
printk(KERN_INFO "Sedlbauer PnP: no ISAPnP card found\n");
}
}
#endif
/* Probe for Sedlbauer speed pci */
#ifdef CONFIG_PCI
if ((dev_sedl = pci_find_device(PCI_VENDOR_ID_TIGERJET,
PCI_DEVICE_ID_TIGERJET_100, dev_sedl))) {
if (pci_enable_device(dev_sedl))
return(0);
cs->irq = dev_sedl->irq;
if (!cs->irq) {
printk(KERN_WARNING "Sedlbauer: No IRQ for PCI card found\n");
return(0);
}
cs->hw.sedl.cfg_reg = pci_resource_start(dev_sedl, 0);
} else {
printk(KERN_WARNING "Sedlbauer: No PCI card found\n");
return(0);
}
cs->irq_flags |= IRQF_SHARED;
cs->hw.sedl.bus = SEDL_BUS_PCI;
sub_vendor_id = dev_sedl->subsystem_vendor;
sub_id = dev_sedl->subsystem_device;
printk(KERN_INFO "Sedlbauer: PCI subvendor:%x subid %x\n",
sub_vendor_id, sub_id);
printk(KERN_INFO "Sedlbauer: PCI base adr %#x\n",
cs->hw.sedl.cfg_reg);
if (sub_id != PCI_SUB_ID_SEDLBAUER) {
printk(KERN_ERR "Sedlbauer: unknown sub id %#x\n", sub_id);
return(0);
}
if (sub_vendor_id == PCI_SUBVENDOR_SPEEDFAX_PYRAMID) {
cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
cs->subtyp = SEDL_SPEEDFAX_PYRAMID;
} else if (sub_vendor_id == PCI_SUBVENDOR_SPEEDFAX_PCI) {
cs->hw.sedl.chip = SEDL_CHIP_ISAC_ISAR;
cs->subtyp = SEDL_SPEEDFAX_PCI;
} else if (sub_vendor_id == PCI_SUBVENDOR_HST_SAPHIR3) {
cs->hw.sedl.chip = SEDL_CHIP_IPAC;
cs->subtyp = HST_SAPHIR3;
} else if (sub_vendor_id == PCI_SUBVENDOR_SEDLBAUER_PCI) {
cs->hw.sedl.chip = SEDL_CHIP_IPAC;
cs->subtyp = SEDL_SPEED_PCI;
} else {
printk(KERN_ERR "Sedlbauer: unknown sub vendor id %#x\n",
sub_vendor_id);
return(0);
}
bytecnt = 256;
cs->hw.sedl.reset_on = SEDL_ISAR_PCI_ISAR_RESET_ON;
cs->hw.sedl.reset_off = SEDL_ISAR_PCI_ISAR_RESET_OFF;
byteout(cs->hw.sedl.cfg_reg, 0xff);
byteout(cs->hw.sedl.cfg_reg, 0x00);
byteout(cs->hw.sedl.cfg_reg+ 2, 0xdd);
byteout(cs->hw.sedl.cfg_reg+ 5, 0x02);
byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_on);
mdelay(2);
byteout(cs->hw.sedl.cfg_reg +3, cs->hw.sedl.reset_off);
mdelay(10);
#else
printk(KERN_WARNING "Sedlbauer: NO_PCI_BIOS\n");
return (0);
#endif /* CONFIG_PCI */
}
ready:
/* In case of the sedlbauer pcmcia card, this region is in use,
* reserved for us by the card manager. So we do not check it
* here, it would fail.
*/
if (cs->hw.sedl.bus != SEDL_BUS_PCMCIA &&
!request_region(cs->hw.sedl.cfg_reg, bytecnt, "sedlbauer isdn")) {
printk(KERN_WARNING
"HiSax: %s config port %x-%x already in use\n",
CardType[card->typ],
cs->hw.sedl.cfg_reg,
cs->hw.sedl.cfg_reg + bytecnt);
return (0);
}
printk(KERN_INFO
"Sedlbauer: defined at 0x%x-0x%x IRQ %d\n",
cs->hw.sedl.cfg_reg,
cs->hw.sedl.cfg_reg + bytecnt,
cs->irq);
cs->BC_Read_Reg = &ReadHSCX;
cs->BC_Write_Reg = &WriteHSCX;
cs->BC_Send_Data = &hscx_fill_fifo;
cs->cardmsg = &Sedl_card_msg;
/*
* testing ISA and PCMCIA Cards for IPAC, default is ISAC
* do not test for PCI card, because ports are different
* and PCI card uses only IPAC (for the moment)
*/
if (cs->hw.sedl.bus != SEDL_BUS_PCI) {
val = readreg(cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR,
cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC, IPAC_ID);
printk(KERN_DEBUG "Sedlbauer: testing IPAC version %x\n", val);
if ((val == 1) || (val == 2)) {
/* IPAC */
cs->subtyp = SEDL_SPEED_WIN2_PC104;
if (cs->hw.sedl.bus == SEDL_BUS_PCMCIA) {
cs->subtyp = SEDL_SPEED_STAR2;
}
cs->hw.sedl.chip = SEDL_CHIP_IPAC;
} else {
/* ISAC_HSCX oder ISAC_ISAR */
if (cs->hw.sedl.chip == SEDL_CHIP_TEST) {
cs->hw.sedl.chip = SEDL_CHIP_ISAC_HSCX;
}
}
}
/*
* hw.sedl.chip is now properly set
*/
printk(KERN_INFO "Sedlbauer: %s detected\n",
Sedlbauer_Types[cs->subtyp]);
setup_isac(cs);
if (cs->hw.sedl.chip == SEDL_CHIP_IPAC) {
if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_PCI_IPAC;
} else {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_IPAC_ANY_IPAC;
}
test_and_set_bit(HW_IPAC, &cs->HW_Flags);
cs->readisac = &ReadISAC_IPAC;
cs->writeisac = &WriteISAC_IPAC;
cs->readisacfifo = &ReadISACfifo_IPAC;
cs->writeisacfifo = &WriteISACfifo_IPAC;
cs->irq_func = &sedlbauer_interrupt_ipac;
val = readreg(cs->hw.sedl.adr, cs->hw.sedl.isac, IPAC_ID);
printk(KERN_INFO "Sedlbauer: IPAC version %x\n", val);
} else {
/* ISAC_HSCX oder ISAC_ISAR */
cs->readisac = &ReadISAC;
cs->writeisac = &WriteISAC;
cs->readisacfifo = &ReadISACfifo;
cs->writeisacfifo = &WriteISACfifo;
if (cs->hw.sedl.chip == SEDL_CHIP_ISAC_ISAR) {
if (cs->hw.sedl.bus == SEDL_BUS_PCI) {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
SEDL_ISAR_PCI_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
SEDL_ISAR_PCI_ISAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
SEDL_ISAR_PCI_ISAR;
} else {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg +
SEDL_ISAR_ISA_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg +
SEDL_ISAR_ISA_ISAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg +
SEDL_ISAR_ISA_ISAR;
cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg +
SEDL_ISAR_ISA_ISAR_RESET_ON;
cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg +
SEDL_ISAR_ISA_ISAR_RESET_OFF;
}
cs->bcs[0].hw.isar.reg = &cs->hw.sedl.isar;
cs->bcs[1].hw.isar.reg = &cs->hw.sedl.isar;
test_and_set_bit(HW_ISAR, &cs->HW_Flags);
cs->irq_func = &sedlbauer_interrupt_isar;
cs->auxcmd = &isar_auxcmd;
ISACVersion(cs, "Sedlbauer:");
cs->BC_Read_Reg = &ReadISAR;
cs->BC_Write_Reg = &WriteISAR;
cs->BC_Send_Data = &isar_fill_fifo;
bytecnt = 3;
while (bytecnt) {
ver = ISARVersion(cs, "Sedlbauer:");
if (ver < 0)
printk(KERN_WARNING
"Sedlbauer: wrong ISAR version (ret = %d)\n", ver);
else
break;
reset_sedlbauer(cs);
bytecnt--;
}
if (!bytecnt) {
release_io_sedlbauer(cs);
return (0);
}
} else {
if (cs->hw.sedl.bus == SEDL_BUS_PCMCIA) {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_ISAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_HSCX;
cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_PCMCIA_RESET;
cs->irq_flags |= IRQF_SHARED;
} else {
cs->hw.sedl.adr = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ADR;
cs->hw.sedl.isac = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_ISAC;
cs->hw.sedl.hscx = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_HSCX;
cs->hw.sedl.reset_on = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_RESET_ON;
cs->hw.sedl.reset_off = cs->hw.sedl.cfg_reg + SEDL_HSCX_ISA_RESET_OFF;
}
cs->irq_func = &sedlbauer_interrupt;
ISACVersion(cs, "Sedlbauer:");
if (HscxVersion(cs, "Sedlbauer:")) {
printk(KERN_WARNING
"Sedlbauer: wrong HSCX versions check IO address\n");
release_io_sedlbauer(cs);
return (0);
}
}
}
return (1);
}