kernel-ark/kernel/power/power.h
Rafael J. Wysocki c7e0831d38 Hibernation: Check if ACPI is enabled during restore in the right place
The following scenario leads to total confusion of the platform firmware on
some boxes (eg. HPC nx6325):
* Hibernate with ACPI enabled
* Resume passing "acpi=off" to the boot kernel

To prevent this from happening it's necessary to check if ACPI is enabled (and
enable it if that's not the case) _right_ _after_ control has been transfered
from the boot kernel to the image kernel, before device_power_up() is called
(ie.  with interrupts disabled).   Enabling ACPI after calling
device_power_up() turns out to be insufficient.

For this reason, introduce new hibernation callback ->leave() that will be
executed before device_power_up() by the restored image kernel.   To make it
work, it also is necessary to move swsusp_suspend() from swsusp.c to disk.c
(it's name is changed to "create_image", which is more up to the point).

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18 14:37:20 -07:00

214 lines
6.9 KiB
C

#include <linux/suspend.h>
#include <linux/utsname.h>
struct swsusp_info {
struct new_utsname uts;
u32 version_code;
unsigned long num_physpages;
int cpus;
unsigned long image_pages;
unsigned long pages;
unsigned long size;
} __attribute__((aligned(PAGE_SIZE)));
#ifdef CONFIG_HIBERNATION
#ifdef CONFIG_ARCH_HIBERNATION_HEADER
/* Maximum size of architecture specific data in a hibernation header */
#define MAX_ARCH_HEADER_SIZE (sizeof(struct new_utsname) + 4)
extern int arch_hibernation_header_save(void *addr, unsigned int max_size);
extern int arch_hibernation_header_restore(void *addr);
static inline int init_header_complete(struct swsusp_info *info)
{
return arch_hibernation_header_save(info, MAX_ARCH_HEADER_SIZE);
}
static inline char *check_image_kernel(struct swsusp_info *info)
{
return arch_hibernation_header_restore(info) ?
"architecture specific data" : NULL;
}
#endif /* CONFIG_ARCH_HIBERNATION_HEADER */
/*
* Keep some memory free so that I/O operations can succeed without paging
* [Might this be more than 4 MB?]
*/
#define PAGES_FOR_IO ((4096 * 1024) >> PAGE_SHIFT)
/*
* Keep 1 MB of memory free so that device drivers can allocate some pages in
* their .suspend() routines without breaking the suspend to disk.
*/
#define SPARE_PAGES ((1024 * 1024) >> PAGE_SHIFT)
/* kernel/power/disk.c */
extern int hibernation_snapshot(int platform_mode);
extern int hibernation_restore(int platform_mode);
extern int hibernation_platform_enter(void);
#endif
extern int pfn_is_nosave(unsigned long);
extern struct mutex pm_mutex;
#define power_attr(_name) \
static struct subsys_attribute _name##_attr = { \
.attr = { \
.name = __stringify(_name), \
.mode = 0644, \
}, \
.show = _name##_show, \
.store = _name##_store, \
}
extern struct kset power_subsys;
/* Preferred image size in bytes (default 500 MB) */
extern unsigned long image_size;
extern int in_suspend;
extern dev_t swsusp_resume_device;
extern sector_t swsusp_resume_block;
extern asmlinkage int swsusp_arch_suspend(void);
extern asmlinkage int swsusp_arch_resume(void);
extern int create_basic_memory_bitmaps(void);
extern void free_basic_memory_bitmaps(void);
extern unsigned int count_data_pages(void);
/**
* Auxiliary structure used for reading the snapshot image data and
* metadata from and writing them to the list of page backup entries
* (PBEs) which is the main data structure of swsusp.
*
* Using struct snapshot_handle we can transfer the image, including its
* metadata, as a continuous sequence of bytes with the help of
* snapshot_read_next() and snapshot_write_next().
*
* The code that writes the image to a storage or transfers it to
* the user land is required to use snapshot_read_next() for this
* purpose and it should not make any assumptions regarding the internal
* structure of the image. Similarly, the code that reads the image from
* a storage or transfers it from the user land is required to use
* snapshot_write_next().
*
* This may allow us to change the internal structure of the image
* in the future with considerably less effort.
*/
struct snapshot_handle {
loff_t offset; /* number of the last byte ready for reading
* or writing in the sequence
*/
unsigned int cur; /* number of the block of PAGE_SIZE bytes the
* next operation will refer to (ie. current)
*/
unsigned int cur_offset; /* offset with respect to the current
* block (for the next operation)
*/
unsigned int prev; /* number of the block of PAGE_SIZE bytes that
* was the current one previously
*/
void *buffer; /* address of the block to read from
* or write to
*/
unsigned int buf_offset; /* location to read from or write to,
* given as a displacement from 'buffer'
*/
int sync_read; /* Set to one to notify the caller of
* snapshot_write_next() that it may
* need to call wait_on_bio_chain()
*/
};
/* This macro returns the address from/to which the caller of
* snapshot_read_next()/snapshot_write_next() is allowed to
* read/write data after the function returns
*/
#define data_of(handle) ((handle).buffer + (handle).buf_offset)
extern unsigned int snapshot_additional_pages(struct zone *zone);
extern int snapshot_read_next(struct snapshot_handle *handle, size_t count);
extern int snapshot_write_next(struct snapshot_handle *handle, size_t count);
extern void snapshot_write_finalize(struct snapshot_handle *handle);
extern int snapshot_image_loaded(struct snapshot_handle *handle);
/*
* This structure is used to pass the values needed for the identification
* of the resume swap area from a user space to the kernel via the
* SNAPSHOT_SET_SWAP_AREA ioctl
*/
struct resume_swap_area {
loff_t offset;
u_int32_t dev;
} __attribute__((packed));
#define SNAPSHOT_IOC_MAGIC '3'
#define SNAPSHOT_FREEZE _IO(SNAPSHOT_IOC_MAGIC, 1)
#define SNAPSHOT_UNFREEZE _IO(SNAPSHOT_IOC_MAGIC, 2)
#define SNAPSHOT_ATOMIC_SNAPSHOT _IOW(SNAPSHOT_IOC_MAGIC, 3, void *)
#define SNAPSHOT_ATOMIC_RESTORE _IO(SNAPSHOT_IOC_MAGIC, 4)
#define SNAPSHOT_FREE _IO(SNAPSHOT_IOC_MAGIC, 5)
#define SNAPSHOT_SET_IMAGE_SIZE _IOW(SNAPSHOT_IOC_MAGIC, 6, unsigned long)
#define SNAPSHOT_AVAIL_SWAP _IOR(SNAPSHOT_IOC_MAGIC, 7, void *)
#define SNAPSHOT_GET_SWAP_PAGE _IOR(SNAPSHOT_IOC_MAGIC, 8, void *)
#define SNAPSHOT_FREE_SWAP_PAGES _IO(SNAPSHOT_IOC_MAGIC, 9)
#define SNAPSHOT_SET_SWAP_FILE _IOW(SNAPSHOT_IOC_MAGIC, 10, unsigned int)
#define SNAPSHOT_S2RAM _IO(SNAPSHOT_IOC_MAGIC, 11)
#define SNAPSHOT_PMOPS _IOW(SNAPSHOT_IOC_MAGIC, 12, unsigned int)
#define SNAPSHOT_SET_SWAP_AREA _IOW(SNAPSHOT_IOC_MAGIC, 13, \
struct resume_swap_area)
#define SNAPSHOT_IOC_MAXNR 13
#define PMOPS_PREPARE 1
#define PMOPS_ENTER 2
#define PMOPS_FINISH 3
/* If unset, the snapshot device cannot be open. */
extern atomic_t snapshot_device_available;
extern sector_t alloc_swapdev_block(int swap);
extern void free_all_swap_pages(int swap);
extern int swsusp_swap_in_use(void);
/*
* Flags that can be passed from the hibernatig hernel to the "boot" kernel in
* the image header.
*/
#define SF_PLATFORM_MODE 1
/* kernel/power/disk.c */
extern int swsusp_check(void);
extern int swsusp_shrink_memory(void);
extern void swsusp_free(void);
extern int swsusp_resume(void);
extern int swsusp_read(unsigned int *flags_p);
extern int swsusp_write(unsigned int flags);
extern void swsusp_close(void);
struct timeval;
/* kernel/power/swsusp.c */
extern void swsusp_show_speed(struct timeval *, struct timeval *,
unsigned int, char *);
#ifdef CONFIG_SUSPEND
/* kernel/power/main.c */
extern int suspend_devices_and_enter(suspend_state_t state);
#else /* !CONFIG_SUSPEND */
static inline int suspend_devices_and_enter(suspend_state_t state)
{
return -ENOSYS;
}
#endif /* !CONFIG_SUSPEND */
/* kernel/power/common.c */
extern struct blocking_notifier_head pm_chain_head;
static inline int pm_notifier_call_chain(unsigned long val)
{
return (blocking_notifier_call_chain(&pm_chain_head, val, NULL)
== NOTIFY_BAD) ? -EINVAL : 0;
}