40eb477678
The Generic Memory Interface bus can be used to connect high-speed devices such as NOR flash, FPGAs, DSPs... Signed-off-by: Mirza Krak <mirza.krak@gmail.com> Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Tested-on: Colibri T20/T30 on EvalBoard V3.x and GMI-Memory Board Acked-by: Jon Hunter <jonathanh@nvidia.com> [treding@nvidia.com: symmetry and coding style OCD] Signed-off-by: Thierry Reding <treding@nvidia.com>
285 lines
7.5 KiB
C
285 lines
7.5 KiB
C
/*
|
|
* Driver for NVIDIA Generic Memory Interface
|
|
*
|
|
* Copyright (C) 2016 Host Mobility AB. All rights reserved.
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without any
|
|
* warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/reset.h>
|
|
|
|
#define TEGRA_GMI_CONFIG 0x00
|
|
#define TEGRA_GMI_CONFIG_GO BIT(31)
|
|
#define TEGRA_GMI_BUS_WIDTH_32BIT BIT(30)
|
|
#define TEGRA_GMI_MUX_MODE BIT(28)
|
|
#define TEGRA_GMI_RDY_BEFORE_DATA BIT(24)
|
|
#define TEGRA_GMI_RDY_ACTIVE_HIGH BIT(23)
|
|
#define TEGRA_GMI_ADV_ACTIVE_HIGH BIT(22)
|
|
#define TEGRA_GMI_OE_ACTIVE_HIGH BIT(21)
|
|
#define TEGRA_GMI_CS_ACTIVE_HIGH BIT(20)
|
|
#define TEGRA_GMI_CS_SELECT(x) ((x & 0x7) << 4)
|
|
|
|
#define TEGRA_GMI_TIMING0 0x10
|
|
#define TEGRA_GMI_MUXED_WIDTH(x) ((x & 0xf) << 12)
|
|
#define TEGRA_GMI_HOLD_WIDTH(x) ((x & 0xf) << 8)
|
|
#define TEGRA_GMI_ADV_WIDTH(x) ((x & 0xf) << 4)
|
|
#define TEGRA_GMI_CE_WIDTH(x) (x & 0xf)
|
|
|
|
#define TEGRA_GMI_TIMING1 0x14
|
|
#define TEGRA_GMI_WE_WIDTH(x) ((x & 0xff) << 16)
|
|
#define TEGRA_GMI_OE_WIDTH(x) ((x & 0xff) << 8)
|
|
#define TEGRA_GMI_WAIT_WIDTH(x) (x & 0xff)
|
|
|
|
#define TEGRA_GMI_MAX_CHIP_SELECT 8
|
|
|
|
struct tegra_gmi {
|
|
struct device *dev;
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
struct reset_control *rst;
|
|
|
|
u32 snor_config;
|
|
u32 snor_timing0;
|
|
u32 snor_timing1;
|
|
};
|
|
|
|
static int tegra_gmi_enable(struct tegra_gmi *gmi)
|
|
{
|
|
int err;
|
|
|
|
err = clk_prepare_enable(gmi->clk);
|
|
if (err < 0) {
|
|
dev_err(gmi->dev, "failed to enable clock: %d\n", err);
|
|
return err;
|
|
}
|
|
|
|
reset_control_assert(gmi->rst);
|
|
usleep_range(2000, 4000);
|
|
reset_control_deassert(gmi->rst);
|
|
|
|
writel(gmi->snor_timing0, gmi->base + TEGRA_GMI_TIMING0);
|
|
writel(gmi->snor_timing1, gmi->base + TEGRA_GMI_TIMING1);
|
|
|
|
gmi->snor_config |= TEGRA_GMI_CONFIG_GO;
|
|
writel(gmi->snor_config, gmi->base + TEGRA_GMI_CONFIG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void tegra_gmi_disable(struct tegra_gmi *gmi)
|
|
{
|
|
u32 config;
|
|
|
|
/* stop GMI operation */
|
|
config = readl(gmi->base + TEGRA_GMI_CONFIG);
|
|
config &= ~TEGRA_GMI_CONFIG_GO;
|
|
writel(config, gmi->base + TEGRA_GMI_CONFIG);
|
|
|
|
reset_control_assert(gmi->rst);
|
|
clk_disable_unprepare(gmi->clk);
|
|
}
|
|
|
|
static int tegra_gmi_parse_dt(struct tegra_gmi *gmi)
|
|
{
|
|
struct device_node *child;
|
|
u32 property, ranges[4];
|
|
int err;
|
|
|
|
child = of_get_next_available_child(gmi->dev->of_node, NULL);
|
|
if (!child) {
|
|
dev_err(gmi->dev, "no child nodes found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* We currently only support one child device due to lack of
|
|
* chip-select address decoding. Which means that we only have one
|
|
* chip-select line from the GMI controller.
|
|
*/
|
|
if (of_get_child_count(gmi->dev->of_node) > 1)
|
|
dev_warn(gmi->dev, "only one child device is supported.");
|
|
|
|
if (of_property_read_bool(child, "nvidia,snor-data-width-32bit"))
|
|
gmi->snor_config |= TEGRA_GMI_BUS_WIDTH_32BIT;
|
|
|
|
if (of_property_read_bool(child, "nvidia,snor-mux-mode"))
|
|
gmi->snor_config |= TEGRA_GMI_MUX_MODE;
|
|
|
|
if (of_property_read_bool(child, "nvidia,snor-rdy-active-before-data"))
|
|
gmi->snor_config |= TEGRA_GMI_RDY_BEFORE_DATA;
|
|
|
|
if (of_property_read_bool(child, "nvidia,snor-rdy-active-high"))
|
|
gmi->snor_config |= TEGRA_GMI_RDY_ACTIVE_HIGH;
|
|
|
|
if (of_property_read_bool(child, "nvidia,snor-adv-active-high"))
|
|
gmi->snor_config |= TEGRA_GMI_ADV_ACTIVE_HIGH;
|
|
|
|
if (of_property_read_bool(child, "nvidia,snor-oe-active-high"))
|
|
gmi->snor_config |= TEGRA_GMI_OE_ACTIVE_HIGH;
|
|
|
|
if (of_property_read_bool(child, "nvidia,snor-cs-active-high"))
|
|
gmi->snor_config |= TEGRA_GMI_CS_ACTIVE_HIGH;
|
|
|
|
/* Decode the CS# */
|
|
err = of_property_read_u32_array(child, "ranges", ranges, 4);
|
|
if (err < 0) {
|
|
/* Invalid binding */
|
|
if (err == -EOVERFLOW) {
|
|
dev_err(gmi->dev,
|
|
"failed to decode CS: invalid ranges length\n");
|
|
goto error_cs;
|
|
}
|
|
|
|
/*
|
|
* If we reach here it means that the child node has an empty
|
|
* ranges or it does not exist at all. Attempt to decode the
|
|
* CS# from the reg property instead.
|
|
*/
|
|
err = of_property_read_u32(child, "reg", &property);
|
|
if (err < 0) {
|
|
dev_err(gmi->dev,
|
|
"failed to decode CS: no reg property found\n");
|
|
goto error_cs;
|
|
}
|
|
} else {
|
|
property = ranges[1];
|
|
}
|
|
|
|
/* Valid chip selects are CS0-CS7 */
|
|
if (property >= TEGRA_GMI_MAX_CHIP_SELECT) {
|
|
dev_err(gmi->dev, "invalid chip select: %d", property);
|
|
err = -EINVAL;
|
|
goto error_cs;
|
|
}
|
|
|
|
gmi->snor_config |= TEGRA_GMI_CS_SELECT(property);
|
|
|
|
/* The default values that are provided below are reset values */
|
|
if (!of_property_read_u32(child, "nvidia,snor-muxed-width", &property))
|
|
gmi->snor_timing0 |= TEGRA_GMI_MUXED_WIDTH(property);
|
|
else
|
|
gmi->snor_timing0 |= TEGRA_GMI_MUXED_WIDTH(1);
|
|
|
|
if (!of_property_read_u32(child, "nvidia,snor-hold-width", &property))
|
|
gmi->snor_timing0 |= TEGRA_GMI_HOLD_WIDTH(property);
|
|
else
|
|
gmi->snor_timing0 |= TEGRA_GMI_HOLD_WIDTH(1);
|
|
|
|
if (!of_property_read_u32(child, "nvidia,snor-adv-width", &property))
|
|
gmi->snor_timing0 |= TEGRA_GMI_ADV_WIDTH(property);
|
|
else
|
|
gmi->snor_timing0 |= TEGRA_GMI_ADV_WIDTH(1);
|
|
|
|
if (!of_property_read_u32(child, "nvidia,snor-ce-width", &property))
|
|
gmi->snor_timing0 |= TEGRA_GMI_CE_WIDTH(property);
|
|
else
|
|
gmi->snor_timing0 |= TEGRA_GMI_CE_WIDTH(4);
|
|
|
|
if (!of_property_read_u32(child, "nvidia,snor-we-width", &property))
|
|
gmi->snor_timing1 |= TEGRA_GMI_WE_WIDTH(property);
|
|
else
|
|
gmi->snor_timing1 |= TEGRA_GMI_WE_WIDTH(1);
|
|
|
|
if (!of_property_read_u32(child, "nvidia,snor-oe-width", &property))
|
|
gmi->snor_timing1 |= TEGRA_GMI_OE_WIDTH(property);
|
|
else
|
|
gmi->snor_timing1 |= TEGRA_GMI_OE_WIDTH(1);
|
|
|
|
if (!of_property_read_u32(child, "nvidia,snor-wait-width", &property))
|
|
gmi->snor_timing1 |= TEGRA_GMI_WAIT_WIDTH(property);
|
|
else
|
|
gmi->snor_timing1 |= TEGRA_GMI_WAIT_WIDTH(3);
|
|
|
|
error_cs:
|
|
of_node_put(child);
|
|
return err;
|
|
}
|
|
|
|
static int tegra_gmi_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct tegra_gmi *gmi;
|
|
struct resource *res;
|
|
int err;
|
|
|
|
gmi = devm_kzalloc(dev, sizeof(*gmi), GFP_KERNEL);
|
|
if (!gmi)
|
|
return -ENOMEM;
|
|
|
|
gmi->dev = dev;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
gmi->base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(gmi->base))
|
|
return PTR_ERR(gmi->base);
|
|
|
|
gmi->clk = devm_clk_get(dev, "gmi");
|
|
if (IS_ERR(gmi->clk)) {
|
|
dev_err(dev, "can not get clock\n");
|
|
return PTR_ERR(gmi->clk);
|
|
}
|
|
|
|
gmi->rst = devm_reset_control_get(dev, "gmi");
|
|
if (IS_ERR(gmi->rst)) {
|
|
dev_err(dev, "can not get reset\n");
|
|
return PTR_ERR(gmi->rst);
|
|
}
|
|
|
|
err = tegra_gmi_parse_dt(gmi);
|
|
if (err)
|
|
return err;
|
|
|
|
err = tegra_gmi_enable(gmi);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = of_platform_default_populate(dev->of_node, NULL, dev);
|
|
if (err < 0) {
|
|
dev_err(dev, "fail to create devices.\n");
|
|
tegra_gmi_disable(gmi);
|
|
return err;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, gmi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int tegra_gmi_remove(struct platform_device *pdev)
|
|
{
|
|
struct tegra_gmi *gmi = platform_get_drvdata(pdev);
|
|
|
|
of_platform_depopulate(gmi->dev);
|
|
tegra_gmi_disable(gmi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id tegra_gmi_id_table[] = {
|
|
{ .compatible = "nvidia,tegra20-gmi", },
|
|
{ .compatible = "nvidia,tegra30-gmi", },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, tegra_gmi_id_table);
|
|
|
|
static struct platform_driver tegra_gmi_driver = {
|
|
.probe = tegra_gmi_probe,
|
|
.remove = tegra_gmi_remove,
|
|
.driver = {
|
|
.name = "tegra-gmi",
|
|
.of_match_table = tegra_gmi_id_table,
|
|
},
|
|
};
|
|
module_platform_driver(tegra_gmi_driver);
|
|
|
|
MODULE_AUTHOR("Mirza Krak <mirza.krak@gmail.com");
|
|
MODULE_DESCRIPTION("NVIDIA Tegra GMI Bus Driver");
|
|
MODULE_LICENSE("GPL v2");
|