kernel-ark/arch/arm/mach-omap2/clock.h
Richard Woodruff 474844f708 ARM: OMAP: Fix OMAP2 dss2 so clk_set_parent works
This adds the delayed application attribute to the dss2 clock.  DSS2
can't select the 48MHz APLL with properly with out validating the
configuration as trigged by this flag.

Signed-off-by: Richard Woodruff <r-woodruff2@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2007-03-07 01:17:46 -08:00

2112 lines
60 KiB
C

/*
* linux/arch/arm/mach-omap24xx/clock.h
*
* Copyright (C) 2005 Texas Instruments Inc.
* Richard Woodruff <r-woodruff2@ti.com>
* Created for OMAP2.
*
* Copyright (C) 2004 Nokia corporation
* Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
* Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
#define __ARCH_ARM_MACH_OMAP2_CLOCK_H
static void omap2_sys_clk_recalc(struct clk * clk);
static void omap2_clksel_recalc(struct clk * clk);
static void omap2_followparent_recalc(struct clk * clk);
static void omap2_propagate_rate(struct clk * clk);
static void omap2_mpu_recalc(struct clk * clk);
static int omap2_select_table_rate(struct clk * clk, unsigned long rate);
static long omap2_round_to_table_rate(struct clk * clk, unsigned long rate);
static void omap2_clk_disable(struct clk *clk);
static void omap2_sys_clk_recalc(struct clk * clk);
static u32 omap2_clksel_to_divisor(u32 div_sel, u32 field_val);
static u32 omap2_clksel_get_divisor(struct clk *clk);
#define RATE_IN_242X (1 << 0)
#define RATE_IN_243X (1 << 1)
/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
* CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
*/
struct prcm_config {
unsigned long xtal_speed; /* crystal rate */
unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */
unsigned long mpu_speed; /* speed of MPU */
unsigned long cm_clksel_mpu; /* mpu divider */
unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */
unsigned long cm_clksel_gfx; /* gfx dividers */
unsigned long cm_clksel1_core; /* major subsystem dividers */
unsigned long cm_clksel1_pll; /* m,n */
unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */
unsigned long cm_clksel_mdm; /* modem dividers 2430 only */
unsigned long base_sdrc_rfr; /* base refresh timing for a set */
unsigned char flags;
};
/* Mask for clksel which support parent settign in set_rate */
#define SRC_SEL_MASK (CM_CORE_SEL1 | CM_CORE_SEL2 | CM_WKUP_SEL1 | \
CM_PLL_SEL1 | CM_PLL_SEL2 | CM_SYSCLKOUT_SEL1)
/* Mask for clksel regs which support rate operations */
#define SRC_RATE_SEL_MASK (CM_MPU_SEL1 | CM_DSP_SEL1 | CM_GFX_SEL1 | \
CM_MODEM_SEL1 | CM_CORE_SEL1 | CM_CORE_SEL2 | \
CM_WKUP_SEL1 | CM_PLL_SEL1 | CM_PLL_SEL2 | \
CM_SYSCLKOUT_SEL1)
/*
* The OMAP2 processor can be run at several discrete 'PRCM configurations'.
* These configurations are characterized by voltage and speed for clocks.
* The device is only validated for certain combinations. One way to express
* these combinations is via the 'ratio's' which the clocks operate with
* respect to each other. These ratio sets are for a given voltage/DPLL
* setting. All configurations can be described by a DPLL setting and a ratio
* There are 3 ratio sets for the 2430 and X ratio sets for 2420.
*
* 2430 differs from 2420 in that there are no more phase synchronizers used.
* They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
* 2430 (iva2.1, NOdsp, mdm)
*/
/* Core fields for cm_clksel, not ratio governed */
#define RX_CLKSEL_DSS1 (0x10 << 8)
#define RX_CLKSEL_DSS2 (0x0 << 13)
#define RX_CLKSEL_SSI (0x5 << 20)
/*-------------------------------------------------------------------------
* Voltage/DPLL ratios
*-------------------------------------------------------------------------*/
/* 2430 Ratio's, 2430-Ratio Config 1 */
#define R1_CLKSEL_L3 (4 << 0)
#define R1_CLKSEL_L4 (2 << 5)
#define R1_CLKSEL_USB (4 << 25)
#define R1_CM_CLKSEL1_CORE_VAL R1_CLKSEL_USB | RX_CLKSEL_SSI | \
RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
R1_CLKSEL_L4 | R1_CLKSEL_L3
#define R1_CLKSEL_MPU (2 << 0)
#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU
#define R1_CLKSEL_DSP (2 << 0)
#define R1_CLKSEL_DSP_IF (2 << 5)
#define R1_CM_CLKSEL_DSP_VAL R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF
#define R1_CLKSEL_GFX (2 << 0)
#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX
#define R1_CLKSEL_MDM (4 << 0)
#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM
/* 2430-Ratio Config 2 */
#define R2_CLKSEL_L3 (6 << 0)
#define R2_CLKSEL_L4 (2 << 5)
#define R2_CLKSEL_USB (2 << 25)
#define R2_CM_CLKSEL1_CORE_VAL R2_CLKSEL_USB | RX_CLKSEL_SSI | \
RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
R2_CLKSEL_L4 | R2_CLKSEL_L3
#define R2_CLKSEL_MPU (2 << 0)
#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU
#define R2_CLKSEL_DSP (2 << 0)
#define R2_CLKSEL_DSP_IF (3 << 5)
#define R2_CM_CLKSEL_DSP_VAL R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF
#define R2_CLKSEL_GFX (2 << 0)
#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX
#define R2_CLKSEL_MDM (6 << 0)
#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM
/* 2430-Ratio Bootm (BYPASS) */
#define RB_CLKSEL_L3 (1 << 0)
#define RB_CLKSEL_L4 (1 << 5)
#define RB_CLKSEL_USB (1 << 25)
#define RB_CM_CLKSEL1_CORE_VAL RB_CLKSEL_USB | RX_CLKSEL_SSI | \
RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
RB_CLKSEL_L4 | RB_CLKSEL_L3
#define RB_CLKSEL_MPU (1 << 0)
#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU
#define RB_CLKSEL_DSP (1 << 0)
#define RB_CLKSEL_DSP_IF (1 << 5)
#define RB_CM_CLKSEL_DSP_VAL RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF
#define RB_CLKSEL_GFX (1 << 0)
#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX
#define RB_CLKSEL_MDM (1 << 0)
#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM
/* 2420 Ratio Equivalents */
#define RXX_CLKSEL_VLYNQ (0x12 << 15)
#define RXX_CLKSEL_SSI (0x8 << 20)
/* 2420-PRCM III 532MHz core */
#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */
#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */
#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */
#define RIII_CM_CLKSEL1_CORE_VAL RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
RIII_CLKSEL_L3
#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */
#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU
#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */
#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */
#define RIII_SYNC_DSP (1 << 7) /* Enable sync */
#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */
#define RIII_SYNC_IVA (1 << 13) /* Enable sync */
#define RIII_CM_CLKSEL_DSP_VAL RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
RIII_CLKSEL_DSP
#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */
#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX
/* 2420-PRCM II 600MHz core */
#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */
#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */
#define RII_CLKSEL_USB (2 << 25) /* 50MHz */
#define RII_CM_CLKSEL1_CORE_VAL RII_CLKSEL_USB | \
RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
RII_CLKSEL_L4 | RII_CLKSEL_L3
#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */
#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU
#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */
#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */
#define RII_SYNC_DSP (0 << 7) /* Bypass sync */
#define RII_CLKSEL_IVA (6 << 8) /* iva1 - 200MHz */
#define RII_SYNC_IVA (0 << 13) /* Bypass sync */
#define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \
RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
RII_CLKSEL_DSP
#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */
#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX
/* 2420-PRCM VII (boot) */
#define RVII_CLKSEL_L3 (1 << 0)
#define RVII_CLKSEL_L4 (1 << 5)
#define RVII_CLKSEL_DSS1 (1 << 8)
#define RVII_CLKSEL_DSS2 (0 << 13)
#define RVII_CLKSEL_VLYNQ (1 << 15)
#define RVII_CLKSEL_SSI (1 << 20)
#define RVII_CLKSEL_USB (1 << 25)
#define RVII_CM_CLKSEL1_CORE_VAL RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \
RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3
#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */
#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU
#define RVII_CLKSEL_DSP (1 << 0)
#define RVII_CLKSEL_DSP_IF (1 << 5)
#define RVII_SYNC_DSP (0 << 7)
#define RVII_CLKSEL_IVA (1 << 8)
#define RVII_SYNC_IVA (0 << 13)
#define RVII_CM_CLKSEL_DSP_VAL RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \
RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP
#define RVII_CLKSEL_GFX (1 << 0)
#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX
/*-------------------------------------------------------------------------
* 2430 Target modes: Along with each configuration the CPU has several
* modes which goes along with them. Modes mainly are the addition of
* describe DPLL combinations to go along with a ratio.
*-------------------------------------------------------------------------*/
/* Hardware governed */
#define MX_48M_SRC (0 << 3)
#define MX_54M_SRC (0 << 5)
#define MX_APLLS_CLIKIN_12 (3 << 23)
#define MX_APLLS_CLIKIN_13 (2 << 23)
#define MX_APLLS_CLIKIN_19_2 (0 << 23)
/*
* 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
* #2 (ratio1) baseport-target
* #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz
*/
#define M5A_DPLL_MULT_12 (133 << 12)
#define M5A_DPLL_DIV_12 (5 << 8)
#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
MX_APLLS_CLIKIN_12
#define M5A_DPLL_MULT_13 (266 << 12)
#define M5A_DPLL_DIV_13 (12 << 8)
#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
MX_APLLS_CLIKIN_13
#define M5A_DPLL_MULT_19 (180 << 12)
#define M5A_DPLL_DIV_19 (12 << 8)
#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
MX_APLLS_CLIKIN_19_2
/* #5b (ratio1) target DPLL = 200*2 = 400MHz */
#define M5B_DPLL_MULT_12 (50 << 12)
#define M5B_DPLL_DIV_12 (2 << 8)
#define M5B_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
MX_APLLS_CLIKIN_12
#define M5B_DPLL_MULT_13 (200 << 12)
#define M5B_DPLL_DIV_13 (12 << 8)
#define M5B_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
MX_APLLS_CLIKIN_13
#define M5B_DPLL_MULT_19 (125 << 12)
#define M5B_DPLL_DIV_19 (31 << 8)
#define M5B_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
MX_APLLS_CLIKIN_19_2
/*
* #4 (ratio2)
* #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz
*/
#define M3_DPLL_MULT_12 (55 << 12)
#define M3_DPLL_DIV_12 (1 << 8)
#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
MX_APLLS_CLIKIN_12
#define M3_DPLL_MULT_13 (330 << 12)
#define M3_DPLL_DIV_13 (12 << 8)
#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
MX_APLLS_CLIKIN_13
#define M3_DPLL_MULT_19 (275 << 12)
#define M3_DPLL_DIV_19 (15 << 8)
#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \
M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
MX_APLLS_CLIKIN_19_2
/* boot (boot) */
#define MB_DPLL_MULT (1 << 12)
#define MB_DPLL_DIV (0 << 8)
#define MB_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
MB_DPLL_MULT | MX_APLLS_CLIKIN_12
#define MB_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
MB_DPLL_MULT | MX_APLLS_CLIKIN_13
#define MB_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
MB_DPLL_MULT | MX_APLLS_CLIKIN_19
/*
* 2430 - chassis (sedna)
* 165 (ratio1) same as above #2
* 150 (ratio1)
* 133 (ratio2) same as above #4
* 110 (ratio2) same as above #3
* 104 (ratio2)
* boot (boot)
*/
/*
* 2420 Equivalent - mode registers
* PRCM II , target DPLL = 2*300MHz = 600MHz
*/
#define MII_DPLL_MULT_12 (50 << 12)
#define MII_DPLL_DIV_12 (1 << 8)
#define MII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
MX_APLLS_CLIKIN_12
#define MII_DPLL_MULT_13 (300 << 12)
#define MII_DPLL_DIV_13 (12 << 8)
#define MII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
MX_APLLS_CLIKIN_13
/* PRCM III target DPLL = 2*266 = 532MHz*/
#define MIII_DPLL_MULT_12 (133 << 12)
#define MIII_DPLL_DIV_12 (5 << 8)
#define MIII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \
MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \
MX_APLLS_CLIKIN_12
#define MIII_DPLL_MULT_13 (266 << 12)
#define MIII_DPLL_DIV_13 (12 << 8)
#define MIII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \
MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \
MX_APLLS_CLIKIN_13
/* PRCM VII (boot bypass) */
#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL
#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL
/* High and low operation value */
#define MX_CLKSEL2_PLL_2x_VAL (2 << 0)
#define MX_CLKSEL2_PLL_1x_VAL (1 << 0)
/*
* These represent optimal values for common parts, it won't work for all.
* As long as you scale down, most parameters are still work, they just
* become sub-optimal. The RFR value goes in the oppisite direction. If you
* don't adjust it down as your clock period increases the refresh interval
* will not be met. Setting all parameters for complete worst case may work,
* but may cut memory performance by 2x. Due to errata the DLLs need to be
* unlocked and their value needs run time calibration. A dynamic call is
* need for that as no single right value exists acorss production samples.
*
* Only the FULL speed values are given. Current code is such that rate
* changes must be made at DPLLoutx2. The actual value adjustment for low
* frequency operation will be handled by omap_set_performance()
*
* By having the boot loader boot up in the fastest L4 speed available likely
* will result in something which you can switch between.
*/
#define V24XX_SDRC_RFR_CTRL_133MHz (0x0003de00 | 1)
#define V24XX_SDRC_RFR_CTRL_100MHz (0x0002da01 | 1)
#define V24XX_SDRC_RFR_CTRL_110MHz (0x0002da01 | 1) /* Need to calc */
#define V24XX_SDRC_RFR_CTRL_BYPASS (0x00005000 | 1) /* Need to calc */
/* MPU speed defines */
#define S12M 12000000
#define S13M 13000000
#define S19M 19200000
#define S26M 26000000
#define S100M 100000000
#define S133M 133000000
#define S150M 150000000
#define S165M 165000000
#define S200M 200000000
#define S266M 266000000
#define S300M 300000000
#define S330M 330000000
#define S400M 400000000
#define S532M 532000000
#define S600M 600000000
#define S660M 660000000
/*-------------------------------------------------------------------------
* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
* xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
* CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
* CM_CLKSEL2_PLL, CM_CLKSEL_MDM
*
* Filling in table based on H4 boards and 2430-SDPs variants available.
* There are quite a few more rates combinations which could be defined.
*
* When multiple values are defiend the start up will try and choose the
* fastest one. If a 'fast' value is defined, then automatically, the /2
* one should be included as it can be used. Generally having more that
* one fast set does not make sense, as static timings need to be changed
* to change the set. The exception is the bypass setting which is
* availble for low power bypass.
*
* Note: This table needs to be sorted, fastest to slowest.
*-------------------------------------------------------------------------*/
static struct prcm_config rate_table[] = {
/* PRCM II - FAST */
{S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
RATE_IN_242X},
{S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
RATE_IN_242X},
/* PRCM III - FAST */
{S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
RATE_IN_242X},
{S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
RATE_IN_242X},
/* PRCM II - SLOW */
{S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
RATE_IN_242X},
{S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */
RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_100MHz,
RATE_IN_242X},
/* PRCM III - SLOW */
{S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
RATE_IN_242X},
{S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_133MHz,
RATE_IN_242X},
/* PRCM-VII (boot-bypass) */
{S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/
RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS,
RATE_IN_242X},
/* PRCM-VII (boot-bypass) */
{S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */
RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, 0, V24XX_SDRC_RFR_CTRL_BYPASS,
RATE_IN_242X},
/* PRCM #3 - ratio2 (ES2) - FAST */
{S13M, S660M, S330M, R2_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */
R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
V24XX_SDRC_RFR_CTRL_110MHz,
RATE_IN_243X},
/* PRCM #5a - ratio1 - FAST */
{S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
V24XX_SDRC_RFR_CTRL_133MHz,
RATE_IN_243X},
/* PRCM #5b - ratio1 - FAST */
{S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
V24XX_SDRC_RFR_CTRL_100MHz,
RATE_IN_243X},
/* PRCM #3 - ratio2 (ES2) - SLOW */
{S13M, S330M, S165M, R2_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */
R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
R2_CM_CLKSEL1_CORE_VAL, M3_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
V24XX_SDRC_RFR_CTRL_110MHz,
RATE_IN_243X},
/* PRCM #5a - ratio1 - SLOW */
{S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
V24XX_SDRC_RFR_CTRL_133MHz,
RATE_IN_243X},
/* PRCM #5b - ratio1 - SLOW*/
{S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */
R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
V24XX_SDRC_RFR_CTRL_100MHz,
RATE_IN_243X},
/* PRCM-boot/bypass */
{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */
RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
V24XX_SDRC_RFR_CTRL_BYPASS,
RATE_IN_243X},
/* PRCM-boot/bypass */
{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */
RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
V24XX_SDRC_RFR_CTRL_BYPASS,
RATE_IN_243X},
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
};
/*-------------------------------------------------------------------------
* 24xx clock tree.
*
* NOTE:In many cases here we are assigning a 'default' parent. In many
* cases the parent is selectable. The get/set parent calls will also
* switch sources.
*
* Many some clocks say always_enabled, but they can be auto idled for
* power savings. They will always be available upon clock request.
*
* Several sources are given initial rates which may be wrong, this will
* be fixed up in the init func.
*
* Things are broadly separated below by clock domains. It is
* noteworthy that most periferals have dependencies on multiple clock
* domains. Many get their interface clocks from the L4 domain, but get
* functional clocks from fixed sources or other core domain derived
* clocks.
*-------------------------------------------------------------------------*/
/* Base external input clocks */
static struct clk func_32k_ck = {
.name = "func_32k_ck",
.rate = 32000,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_FIXED | ALWAYS_ENABLED,
};
/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */
.name = "osc_ck",
.rate = 26000000, /* fixed up in clock init */
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_FIXED | RATE_PROPAGATES,
};
/* With out modem likely 12MHz, with modem likely 13MHz */
static struct clk sys_ck = { /* (*12, *13, 19.2, 26, 38.4)MHz */
.name = "sys_ck", /* ~ ref_clk also */
.parent = &osc_ck,
.rate = 13000000,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
.rate_offset = 6, /* sysclkdiv 1 or 2, already handled or no boot */
.recalc = &omap2_sys_clk_recalc,
};
static struct clk alt_ck = { /* Typical 54M or 48M, may not exist */
.name = "alt_ck",
.rate = 54000000,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_FIXED | ALWAYS_ENABLED | RATE_PROPAGATES,
.recalc = &omap2_propagate_rate,
};
/*
* Analog domain root source clocks
*/
/* dpll_ck, is broken out in to special cases through clksel */
static struct clk dpll_ck = {
.name = "dpll_ck",
.parent = &sys_ck, /* Can be func_32k also */
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_PROPAGATES | RATE_CKCTL | CM_PLL_SEL1,
.recalc = &omap2_clksel_recalc,
};
static struct clk apll96_ck = {
.name = "apll96_ck",
.parent = &sys_ck,
.rate = 96000000,
.flags = CLOCK_IN_OMAP242X |CLOCK_IN_OMAP243X |
RATE_FIXED | RATE_PROPAGATES,
.enable_reg = (void __iomem *)&CM_CLKEN_PLL,
.enable_bit = 0x2,
.recalc = &omap2_propagate_rate,
};
static struct clk apll54_ck = {
.name = "apll54_ck",
.parent = &sys_ck,
.rate = 54000000,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_FIXED | RATE_PROPAGATES,
.enable_reg = (void __iomem *)&CM_CLKEN_PLL,
.enable_bit = 0x6,
.recalc = &omap2_propagate_rate,
};
/*
* PRCM digital base sources
*/
static struct clk func_54m_ck = {
.name = "func_54m_ck",
.parent = &apll54_ck, /* can also be alt_clk */
.rate = 54000000,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES,
.src_offset = 5,
.enable_reg = (void __iomem *)&CM_CLKEN_PLL,
.enable_bit = 0xff,
.recalc = &omap2_propagate_rate,
};
static struct clk core_ck = {
.name = "core_ck",
.parent = &dpll_ck, /* can also be 32k */
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
ALWAYS_ENABLED | RATE_PROPAGATES,
.recalc = &omap2_propagate_rate,
};
static struct clk sleep_ck = { /* sys_clk or 32k */
.name = "sleep_ck",
.parent = &func_32k_ck,
.rate = 32000,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.recalc = &omap2_propagate_rate,
};
static struct clk func_96m_ck = {
.name = "func_96m_ck",
.parent = &apll96_ck,
.rate = 96000000,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_FIXED | RATE_PROPAGATES,
.enable_reg = (void __iomem *)&CM_CLKEN_PLL,
.enable_bit = 0xff,
.recalc = &omap2_propagate_rate,
};
static struct clk func_48m_ck = {
.name = "func_48m_ck",
.parent = &apll96_ck, /* 96M or Alt */
.rate = 48000000,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_FIXED | CM_PLL_SEL1 | RATE_PROPAGATES,
.src_offset = 3,
.enable_reg = (void __iomem *)&CM_CLKEN_PLL,
.enable_bit = 0xff,
.recalc = &omap2_propagate_rate,
};
static struct clk func_12m_ck = {
.name = "func_12m_ck",
.parent = &func_48m_ck,
.rate = 12000000,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_FIXED | RATE_PROPAGATES,
.recalc = &omap2_propagate_rate,
.enable_reg = (void __iomem *)&CM_CLKEN_PLL,
.enable_bit = 0xff,
};
/* Secure timer, only available in secure mode */
static struct clk wdt1_osc_ck = {
.name = "ck_wdt1_osc",
.parent = &osc_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.recalc = &omap2_followparent_recalc,
};
static struct clk sys_clkout = {
.name = "sys_clkout",
.parent = &func_54m_ck,
.rate = 54000000,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
CM_SYSCLKOUT_SEL1 | RATE_CKCTL,
.src_offset = 0,
.enable_reg = (void __iomem *)&PRCM_CLKOUT_CTRL,
.enable_bit = 7,
.rate_offset = 3,
.recalc = &omap2_clksel_recalc,
};
/* In 2430, new in 2420 ES2 */
static struct clk sys_clkout2 = {
.name = "sys_clkout2",
.parent = &func_54m_ck,
.rate = 54000000,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
CM_SYSCLKOUT_SEL1 | RATE_CKCTL,
.src_offset = 8,
.enable_reg = (void __iomem *)&PRCM_CLKOUT_CTRL,
.enable_bit = 15,
.rate_offset = 11,
.recalc = &omap2_clksel_recalc,
};
static struct clk emul_ck = {
.name = "emul_ck",
.parent = &func_54m_ck,
.flags = CLOCK_IN_OMAP242X,
.enable_reg = (void __iomem *)&PRCM_CLKEMUL_CTRL,
.enable_bit = 0,
.recalc = &omap2_propagate_rate,
};
/*
* MPU clock domain
* Clocks:
* MPU_FCLK, MPU_ICLK
* INT_M_FCLK, INT_M_I_CLK
*
* - Individual clocks are hardware managed.
* - Base divider comes from: CM_CLKSEL_MPU
*
*/
static struct clk mpu_ck = { /* Control cpu */
.name = "mpu_ck",
.parent = &core_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL |
ALWAYS_ENABLED | CM_MPU_SEL1 | DELAYED_APP |
CONFIG_PARTICIPANT | RATE_PROPAGATES,
.rate_offset = 0, /* bits 0-4 */
.recalc = &omap2_clksel_recalc,
};
/*
* DSP (2430-IVA2.1) (2420-UMA+IVA1) clock domain
* Clocks:
* 2430: IVA2.1_FCLK, IVA2.1_ICLK
* 2420: UMA_FCLK, UMA_ICLK, IVA_MPU, IVA_COP
*/
static struct clk iva2_1_fck = {
.name = "iva2_1_fck",
.parent = &core_ck,
.flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 |
DELAYED_APP | RATE_PROPAGATES |
CONFIG_PARTICIPANT,
.rate_offset = 0,
.enable_reg = (void __iomem *)&CM_FCLKEN_DSP,
.enable_bit = 0,
.recalc = &omap2_clksel_recalc,
};
static struct clk iva2_1_ick = {
.name = "iva2_1_ick",
.parent = &iva2_1_fck,
.flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_DSP_SEL1 |
DELAYED_APP | CONFIG_PARTICIPANT,
.rate_offset = 5,
.recalc = &omap2_clksel_recalc,
};
/*
* Won't be too specific here. The core clock comes into this block
* it is divided then tee'ed. One branch goes directly to xyz enable
* controls. The other branch gets further divided by 2 then possibly
* routed into a synchronizer and out of clocks abc.
*/
static struct clk dsp_fck = {
.name = "dsp_fck",
.parent = &core_ck,
.flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 |
DELAYED_APP | CONFIG_PARTICIPANT | RATE_PROPAGATES,
.rate_offset = 0,
.enable_reg = (void __iomem *)&CM_FCLKEN_DSP,
.enable_bit = 0,
.recalc = &omap2_clksel_recalc,
};
static struct clk dsp_ick = {
.name = "dsp_ick", /* apparently ipi and isp */
.parent = &dsp_fck,
.flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1 |
DELAYED_APP | CONFIG_PARTICIPANT,
.rate_offset = 5,
.enable_reg = (void __iomem *)&CM_ICLKEN_DSP,
.enable_bit = 1, /* for ipi */
.recalc = &omap2_clksel_recalc,
};
static struct clk iva1_ifck = {
.name = "iva1_ifck",
.parent = &core_ck,
.flags = CLOCK_IN_OMAP242X | CM_DSP_SEL1 | RATE_CKCTL |
CONFIG_PARTICIPANT | RATE_PROPAGATES | DELAYED_APP,
.rate_offset= 8,
.enable_reg = (void __iomem *)&CM_FCLKEN_DSP,
.enable_bit = 10,
.recalc = &omap2_clksel_recalc,
};
/* IVA1 mpu/int/i/f clocks are /2 of parent */
static struct clk iva1_mpu_int_ifck = {
.name = "iva1_mpu_int_ifck",
.parent = &iva1_ifck,
.flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_DSP_SEL1,
.enable_reg = (void __iomem *)&CM_FCLKEN_DSP,
.enable_bit = 8,
.recalc = &omap2_clksel_recalc,
};
/*
* L3 clock domain
* L3 clocks are used for both interface and functional clocks to
* multiple entities. Some of these clocks are completely managed
* by hardware, and some others allow software control. Hardware
* managed ones general are based on directly CLK_REQ signals and
* various auto idle settings. The functional spec sets many of these
* as 'tie-high' for their enables.
*
* I-CLOCKS:
* L3-Interconnect, SMS, GPMC, SDRC, OCM_RAM, OCM_ROM, SDMA
* CAM, HS-USB.
* F-CLOCK
* SSI.
*
* GPMC memories and SDRC have timing and clock sensitive registers which
* may very well need notification when the clock changes. Currently for low
* operating points, these are taken care of in sleep.S.
*/
static struct clk core_l3_ck = { /* Used for ick and fck, interconnect */
.name = "core_l3_ck",
.parent = &core_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 |
DELAYED_APP | CONFIG_PARTICIPANT |
RATE_PROPAGATES,
.rate_offset = 0,
.recalc = &omap2_clksel_recalc,
};
static struct clk usb_l4_ick = { /* FS-USB interface clock */
.name = "usb_l4_ick",
.parent = &core_l3_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP |
CONFIG_PARTICIPANT,
.enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
.enable_bit = 0,
.rate_offset = 25,
.recalc = &omap2_clksel_recalc,
};
/*
* SSI is in L3 management domain, its direct parent is core not l3,
* many core power domain entities are grouped into the L3 clock
* domain.
* SSI_SSR_FCLK, SSI_SST_FCLK, SSI_L4_CLIK
*
* ssr = core/1/2/3/4/5, sst = 1/2 ssr.
*/
static struct clk ssi_ssr_sst_fck = {
.name = "ssi_fck",
.parent = &core_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
.enable_reg = (void __iomem *)&CM_FCLKEN2_CORE, /* bit 1 */
.enable_bit = 1,
.rate_offset = 20,
.recalc = &omap2_clksel_recalc,
};
/*
* GFX clock domain
* Clocks:
* GFX_FCLK, GFX_ICLK
* GFX_CG1(2d), GFX_CG2(3d)
*
* GFX_FCLK runs from L3, and is divided by (1,2,3,4)
* The 2d and 3d clocks run at a hardware determined
* divided value of fclk.
*
*/
static struct clk gfx_3d_fck = {
.name = "gfx_3d_fck",
.parent = &core_l3_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_CKCTL | CM_GFX_SEL1,
.enable_reg = (void __iomem *)&CM_FCLKEN_GFX,
.enable_bit = 2,
.rate_offset= 0,
.recalc = &omap2_clksel_recalc,
};
static struct clk gfx_2d_fck = {
.name = "gfx_2d_fck",
.parent = &core_l3_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_CKCTL | CM_GFX_SEL1,
.enable_reg = (void __iomem *)&CM_FCLKEN_GFX,
.enable_bit = 1,
.rate_offset= 0,
.recalc = &omap2_clksel_recalc,
};
static struct clk gfx_ick = {
.name = "gfx_ick", /* From l3 */
.parent = &core_l3_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_CKCTL,
.enable_reg = (void __iomem *)&CM_ICLKEN_GFX, /* bit 0 */
.enable_bit = 0,
.recalc = &omap2_followparent_recalc,
};
/*
* Modem clock domain (2430)
* CLOCKS:
* MDM_OSC_CLK
* MDM_ICLK
*/
static struct clk mdm_ick = { /* used both as a ick and fck */
.name = "mdm_ick",
.parent = &core_ck,
.flags = CLOCK_IN_OMAP243X | RATE_CKCTL | CM_MODEM_SEL1 |
DELAYED_APP | CONFIG_PARTICIPANT,
.rate_offset = 0,
.enable_reg = (void __iomem *)&CM_ICLKEN_MDM,
.enable_bit = 0,
.recalc = &omap2_clksel_recalc,
};
static struct clk mdm_osc_ck = {
.name = "mdm_osc_ck",
.rate = 26000000,
.parent = &osc_ck,
.flags = CLOCK_IN_OMAP243X | RATE_FIXED,
.enable_reg = (void __iomem *)&CM_FCLKEN_MDM,
.enable_bit = 1,
.recalc = &omap2_followparent_recalc,
};
/*
* L4 clock management domain
*
* This domain contains lots of interface clocks from the L4 interface, some
* functional clocks. Fixed APLL functional source clocks are managed in
* this domain.
*/
static struct clk l4_ck = { /* used both as an ick and fck */
.name = "l4_ck",
.parent = &core_l3_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_CKCTL | ALWAYS_ENABLED | CM_CORE_SEL1 |
DELAYED_APP | RATE_PROPAGATES,
.rate_offset = 5,
.recalc = &omap2_clksel_recalc,
};
static struct clk ssi_l4_ick = {
.name = "ssi_l4_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL,
.enable_reg = (void __iomem *)&CM_ICLKEN2_CORE, /* bit 1 */
.enable_bit = 1,
.recalc = &omap2_followparent_recalc,
};
/*
* DSS clock domain
* CLOCKs:
* DSS_L4_ICLK, DSS_L3_ICLK,
* DSS_CLK1, DSS_CLK2, DSS_54MHz_CLK
*
* DSS is both initiator and target.
*/
static struct clk dss_ick = { /* Enables both L3,L4 ICLK's */
.name = "dss_ick",
.parent = &l4_ck, /* really both l3 and l4 */
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X | RATE_CKCTL,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.enable_bit = 0,
.recalc = &omap2_followparent_recalc,
};
static struct clk dss1_fck = {
.name = "dss1_fck",
.parent = &core_ck, /* Core or sys */
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 0,
.rate_offset = 8,
.src_offset = 8,
.recalc = &omap2_clksel_recalc,
};
static struct clk dss2_fck = { /* Alt clk used in power management */
.name = "dss2_fck",
.parent = &sys_ck, /* fixed at sys_ck or 48MHz */
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_CKCTL | CM_CORE_SEL1 | RATE_FIXED |
DELAYED_APP,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 1,
.src_offset = 13,
.recalc = &omap2_followparent_recalc,
};
static struct clk dss_54m_fck = { /* Alt clk used in power management */
.name = "dss_54m_fck", /* 54m tv clk */
.parent = &func_54m_ck,
.rate = 54000000,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
RATE_FIXED | RATE_PROPAGATES,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 2,
.recalc = &omap2_propagate_rate,
};
/*
* CORE power domain ICLK & FCLK defines.
* Many of the these can have more than one possible parent. Entries
* here will likely have an L4 interface parent, and may have multiple
* functional clock parents.
*/
static struct clk gpt1_ick = {
.name = "gpt1_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN_WKUP, /* Bit0 */
.enable_bit = 0,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt1_fck = {
.name = "gpt1_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
CM_WKUP_SEL1,
.enable_reg = (void __iomem *)&CM_FCLKEN_WKUP, /* Bit0 */
.enable_bit = 0,
.src_offset = 0,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt2_ick = {
.name = "gpt2_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit4 */
.enable_bit = 4,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt2_fck = {
.name = "gpt2_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
CM_CORE_SEL2,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 4,
.src_offset = 2,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt3_ick = {
.name = "gpt3_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit5 */
.enable_bit = 5,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt3_fck = {
.name = "gpt3_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
CM_CORE_SEL2,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 5,
.src_offset = 4,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt4_ick = {
.name = "gpt4_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit6 */
.enable_bit = 6,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt4_fck = {
.name = "gpt4_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
CM_CORE_SEL2,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 6,
.src_offset = 6,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt5_ick = {
.name = "gpt5_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* Bit7 */
.enable_bit = 7,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt5_fck = {
.name = "gpt5_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
CM_CORE_SEL2,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 7,
.src_offset = 8,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt6_ick = {
.name = "gpt6_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_bit = 8,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit8 */
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt6_fck = {
.name = "gpt6_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
CM_CORE_SEL2,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 8,
.src_offset = 10,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt7_ick = {
.name = "gpt7_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit9 */
.enable_bit = 9,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt7_fck = {
.name = "gpt7_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
CM_CORE_SEL2,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 9,
.src_offset = 12,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt8_ick = {
.name = "gpt8_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit10 */
.enable_bit = 10,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt8_fck = {
.name = "gpt8_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
CM_CORE_SEL2,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 10,
.src_offset = 14,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt9_ick = {
.name = "gpt9_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.enable_bit = 11,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt9_fck = {
.name = "gpt9_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
CM_CORE_SEL2,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 11,
.src_offset = 16,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt10_ick = {
.name = "gpt10_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.enable_bit = 12,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt10_fck = {
.name = "gpt10_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
CM_CORE_SEL2,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 12,
.src_offset = 18,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt11_ick = {
.name = "gpt11_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.enable_bit = 13,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt11_fck = {
.name = "gpt11_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
CM_CORE_SEL2,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 13,
.src_offset = 20,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt12_ick = {
.name = "gpt12_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit14 */
.enable_bit = 14,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpt12_fck = {
.name = "gpt12_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
CM_CORE_SEL2,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 14,
.src_offset = 22,
.recalc = &omap2_followparent_recalc,
};
static struct clk mcbsp1_ick = {
.name = "mcbsp1_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_bit = 15,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE, /* bit16 */
.recalc = &omap2_followparent_recalc,
};
static struct clk mcbsp1_fck = {
.name = "mcbsp1_fck",
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_bit = 15,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.recalc = &omap2_followparent_recalc,
};
static struct clk mcbsp2_ick = {
.name = "mcbsp2_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_bit = 16,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.recalc = &omap2_followparent_recalc,
};
static struct clk mcbsp2_fck = {
.name = "mcbsp2_fck",
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_bit = 16,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.recalc = &omap2_followparent_recalc,
};
static struct clk mcbsp3_ick = {
.name = "mcbsp3_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
.enable_bit = 3,
.recalc = &omap2_followparent_recalc,
};
static struct clk mcbsp3_fck = {
.name = "mcbsp3_fck",
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
.enable_bit = 3,
.recalc = &omap2_followparent_recalc,
};
static struct clk mcbsp4_ick = {
.name = "mcbsp4_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
.enable_bit = 4,
.recalc = &omap2_followparent_recalc,
};
static struct clk mcbsp4_fck = {
.name = "mcbsp4_fck",
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
.enable_bit = 4,
.recalc = &omap2_followparent_recalc,
};
static struct clk mcbsp5_ick = {
.name = "mcbsp5_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
.enable_bit = 5,
.recalc = &omap2_followparent_recalc,
};
static struct clk mcbsp5_fck = {
.name = "mcbsp5_fck",
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
.enable_bit = 5,
.recalc = &omap2_followparent_recalc,
};
static struct clk mcspi1_ick = {
.name = "mcspi_ick",
.id = 1,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.enable_bit = 17,
.recalc = &omap2_followparent_recalc,
};
static struct clk mcspi1_fck = {
.name = "mcspi_fck",
.id = 1,
.parent = &func_48m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 17,
.recalc = &omap2_followparent_recalc,
};
static struct clk mcspi2_ick = {
.name = "mcspi_ick",
.id = 2,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.enable_bit = 18,
.recalc = &omap2_followparent_recalc,
};
static struct clk mcspi2_fck = {
.name = "mcspi_fck",
.id = 2,
.parent = &func_48m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 18,
.recalc = &omap2_followparent_recalc,
};
static struct clk mcspi3_ick = {
.name = "mcspi_ick",
.id = 3,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
.enable_bit = 9,
.recalc = &omap2_followparent_recalc,
};
static struct clk mcspi3_fck = {
.name = "mcspi_fck",
.id = 3,
.parent = &func_48m_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
.enable_bit = 9,
.recalc = &omap2_followparent_recalc,
};
static struct clk uart1_ick = {
.name = "uart1_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.enable_bit = 21,
.recalc = &omap2_followparent_recalc,
};
static struct clk uart1_fck = {
.name = "uart1_fck",
.parent = &func_48m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 21,
.recalc = &omap2_followparent_recalc,
};
static struct clk uart2_ick = {
.name = "uart2_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.enable_bit = 22,
.recalc = &omap2_followparent_recalc,
};
static struct clk uart2_fck = {
.name = "uart2_fck",
.parent = &func_48m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 22,
.recalc = &omap2_followparent_recalc,
};
static struct clk uart3_ick = {
.name = "uart3_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
.enable_bit = 2,
.recalc = &omap2_followparent_recalc,
};
static struct clk uart3_fck = {
.name = "uart3_fck",
.parent = &func_48m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
.enable_bit = 2,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpios_ick = {
.name = "gpios_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN_WKUP,
.enable_bit = 2,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpios_fck = {
.name = "gpios_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN_WKUP,
.enable_bit = 2,
.recalc = &omap2_followparent_recalc,
};
static struct clk mpu_wdt_ick = {
.name = "mpu_wdt_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN_WKUP,
.enable_bit = 3,
.recalc = &omap2_followparent_recalc,
};
static struct clk mpu_wdt_fck = {
.name = "mpu_wdt_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN_WKUP,
.enable_bit = 3,
.recalc = &omap2_followparent_recalc,
};
static struct clk sync_32k_ick = {
.name = "sync_32k_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN_WKUP,
.enable_bit = 1,
.recalc = &omap2_followparent_recalc,
};
static struct clk wdt1_ick = {
.name = "wdt1_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN_WKUP,
.enable_bit = 4,
.recalc = &omap2_followparent_recalc,
};
static struct clk omapctrl_ick = {
.name = "omapctrl_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN_WKUP,
.enable_bit = 5,
.recalc = &omap2_followparent_recalc,
};
static struct clk icr_ick = {
.name = "icr_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN_WKUP,
.enable_bit = 6,
.recalc = &omap2_followparent_recalc,
};
static struct clk cam_ick = {
.name = "cam_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.enable_bit = 31,
.recalc = &omap2_followparent_recalc,
};
static struct clk cam_fck = {
.name = "cam_fck",
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 31,
.recalc = &omap2_followparent_recalc,
};
static struct clk mailboxes_ick = {
.name = "mailboxes_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.enable_bit = 30,
.recalc = &omap2_followparent_recalc,
};
static struct clk wdt4_ick = {
.name = "wdt4_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.enable_bit = 29,
.recalc = &omap2_followparent_recalc,
};
static struct clk wdt4_fck = {
.name = "wdt4_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 29,
.recalc = &omap2_followparent_recalc,
};
static struct clk wdt3_ick = {
.name = "wdt3_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.enable_bit = 28,
.recalc = &omap2_followparent_recalc,
};
static struct clk wdt3_fck = {
.name = "wdt3_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP242X,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 28,
.recalc = &omap2_followparent_recalc,
};
static struct clk mspro_ick = {
.name = "mspro_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.enable_bit = 27,
.recalc = &omap2_followparent_recalc,
};
static struct clk mspro_fck = {
.name = "mspro_fck",
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 27,
.recalc = &omap2_followparent_recalc,
};
static struct clk mmc_ick = {
.name = "mmc_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.enable_bit = 26,
.recalc = &omap2_followparent_recalc,
};
static struct clk mmc_fck = {
.name = "mmc_fck",
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP242X,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 26,
.recalc = &omap2_followparent_recalc,
};
static struct clk fac_ick = {
.name = "fac_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.enable_bit = 25,
.recalc = &omap2_followparent_recalc,
};
static struct clk fac_fck = {
.name = "fac_fck",
.parent = &func_12m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 25,
.recalc = &omap2_followparent_recalc,
};
static struct clk eac_ick = {
.name = "eac_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.enable_bit = 24,
.recalc = &omap2_followparent_recalc,
};
static struct clk eac_fck = {
.name = "eac_fck",
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP242X,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 24,
.recalc = &omap2_followparent_recalc,
};
static struct clk hdq_ick = {
.name = "hdq_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.enable_bit = 23,
.recalc = &omap2_followparent_recalc,
};
static struct clk hdq_fck = {
.name = "hdq_fck",
.parent = &func_12m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 23,
.recalc = &omap2_followparent_recalc,
};
static struct clk i2c2_ick = {
.name = "i2c_ick",
.id = 2,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.enable_bit = 20,
.recalc = &omap2_followparent_recalc,
};
static struct clk i2c2_fck = {
.name = "i2c_fck",
.id = 2,
.parent = &func_12m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 20,
.recalc = &omap2_followparent_recalc,
};
static struct clk i2chs2_fck = {
.name = "i2chs2_fck",
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
.enable_bit = 20,
.recalc = &omap2_followparent_recalc,
};
static struct clk i2c1_ick = {
.name = "i2c_ick",
.id = 1,
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.enable_bit = 19,
.recalc = &omap2_followparent_recalc,
};
static struct clk i2c1_fck = {
.name = "i2c_fck",
.id = 1,
.parent = &func_12m_ck,
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 19,
.recalc = &omap2_followparent_recalc,
};
static struct clk i2chs1_fck = {
.name = "i2chs1_fck",
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
.enable_bit = 19,
.recalc = &omap2_followparent_recalc,
};
static struct clk vlynq_ick = {
.name = "vlynq_ick",
.parent = &core_l3_ck,
.flags = CLOCK_IN_OMAP242X,
.enable_reg = (void __iomem *)&CM_ICLKEN1_CORE,
.enable_bit = 3,
.recalc = &omap2_followparent_recalc,
};
static struct clk vlynq_fck = {
.name = "vlynq_fck",
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP242X | RATE_CKCTL | CM_CORE_SEL1 | DELAYED_APP,
.enable_reg = (void __iomem *)&CM_FCLKEN1_CORE,
.enable_bit = 3,
.src_offset = 15,
.recalc = &omap2_followparent_recalc,
};
static struct clk sdrc_ick = {
.name = "sdrc_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN3_CORE,
.enable_bit = 2,
.recalc = &omap2_followparent_recalc,
};
static struct clk des_ick = {
.name = "des_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
.enable_reg = (void __iomem *)&CM_ICLKEN4_CORE,
.enable_bit = 0,
.recalc = &omap2_followparent_recalc,
};
static struct clk sha_ick = {
.name = "sha_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
.enable_reg = (void __iomem *)&CM_ICLKEN4_CORE,
.enable_bit = 1,
.recalc = &omap2_followparent_recalc,
};
static struct clk rng_ick = {
.name = "rng_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
.enable_reg = (void __iomem *)&CM_ICLKEN4_CORE,
.enable_bit = 2,
.recalc = &omap2_followparent_recalc,
};
static struct clk aes_ick = {
.name = "aes_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
.enable_reg = (void __iomem *)&CM_ICLKEN4_CORE,
.enable_bit = 3,
.recalc = &omap2_followparent_recalc,
};
static struct clk pka_ick = {
.name = "pka_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
.enable_reg = (void __iomem *)&CM_ICLKEN4_CORE,
.enable_bit = 4,
.recalc = &omap2_followparent_recalc,
};
static struct clk usb_fck = {
.name = "usb_fck",
.parent = &func_48m_ck,
.flags = CLOCK_IN_OMAP243X | CLOCK_IN_OMAP242X,
.enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
.enable_bit = 0,
.recalc = &omap2_followparent_recalc,
};
static struct clk usbhs_ick = {
.name = "usbhs_ick",
.parent = &core_l3_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
.enable_bit = 6,
.recalc = &omap2_followparent_recalc,
};
static struct clk mmchs1_ick = {
.name = "mmchs1_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
.enable_bit = 7,
.recalc = &omap2_followparent_recalc,
};
static struct clk mmchs1_fck = {
.name = "mmchs1_fck",
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
.enable_bit = 7,
.recalc = &omap2_followparent_recalc,
};
static struct clk mmchs2_ick = {
.name = "mmchs2_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
.enable_bit = 8,
.recalc = &omap2_followparent_recalc,
};
static struct clk mmchs2_fck = {
.name = "mmchs2_fck",
.parent = &func_96m_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
.enable_bit = 8,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpio5_ick = {
.name = "gpio5_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
.enable_bit = 10,
.recalc = &omap2_followparent_recalc,
};
static struct clk gpio5_fck = {
.name = "gpio5_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
.enable_bit = 10,
.recalc = &omap2_followparent_recalc,
};
static struct clk mdm_intc_ick = {
.name = "mdm_intc_ick",
.parent = &l4_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_ICLKEN2_CORE,
.enable_bit = 11,
.recalc = &omap2_followparent_recalc,
};
static struct clk mmchsdb1_fck = {
.name = "mmchsdb1_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
.enable_bit = 16,
.recalc = &omap2_followparent_recalc,
};
static struct clk mmchsdb2_fck = {
.name = "mmchsdb2_fck",
.parent = &func_32k_ck,
.flags = CLOCK_IN_OMAP243X,
.enable_reg = (void __iomem *)&CM_FCLKEN2_CORE,
.enable_bit = 17,
.recalc = &omap2_followparent_recalc,
};
/*
* This clock is a composite clock which does entire set changes then
* forces a rebalance. It keys on the MPU speed, but it really could
* be any key speed part of a set in the rate table.
*
* to really change a set, you need memory table sets which get changed
* in sram, pre-notifiers & post notifiers, changing the top set, without
* having low level display recalc's won't work... this is why dpm notifiers
* work, isr's off, walk a list of clocks already _off_ and not messing with
* the bus.
*
* This clock should have no parent. It embodies the entire upper level
* active set. A parent will mess up some of the init also.
*/
static struct clk virt_prcm_set = {
.name = "virt_prcm_set",
.flags = CLOCK_IN_OMAP242X | CLOCK_IN_OMAP243X |
VIRTUAL_CLOCK | ALWAYS_ENABLED | DELAYED_APP,
.parent = &mpu_ck, /* Indexed by mpu speed, no parent */
.recalc = &omap2_mpu_recalc, /* sets are keyed on mpu rate */
.set_rate = &omap2_select_table_rate,
.round_rate = &omap2_round_to_table_rate,
};
static struct clk *onchip_clks[] = {
/* external root sources */
&func_32k_ck,
&osc_ck,
&sys_ck,
&alt_ck,
/* internal analog sources */
&dpll_ck,
&apll96_ck,
&apll54_ck,
/* internal prcm root sources */
&func_54m_ck,
&core_ck,
&sleep_ck,
&func_96m_ck,
&func_48m_ck,
&func_12m_ck,
&wdt1_osc_ck,
&sys_clkout,
&sys_clkout2,
&emul_ck,
/* mpu domain clocks */
&mpu_ck,
/* dsp domain clocks */
&iva2_1_fck, /* 2430 */
&iva2_1_ick,
&dsp_ick, /* 2420 */
&dsp_fck,
&iva1_ifck,
&iva1_mpu_int_ifck,
/* GFX domain clocks */
&gfx_3d_fck,
&gfx_2d_fck,
&gfx_ick,
/* Modem domain clocks */
&mdm_ick,
&mdm_osc_ck,
/* DSS domain clocks */
&dss_ick,
&dss1_fck,
&dss2_fck,
&dss_54m_fck,
/* L3 domain clocks */
&core_l3_ck,
&ssi_ssr_sst_fck,
&usb_l4_ick,
/* L4 domain clocks */
&l4_ck, /* used as both core_l4 and wu_l4 */
&ssi_l4_ick,
/* virtual meta-group clock */
&virt_prcm_set,
/* general l4 interface ck, multi-parent functional clk */
&gpt1_ick,
&gpt1_fck,
&gpt2_ick,
&gpt2_fck,
&gpt3_ick,
&gpt3_fck,
&gpt4_ick,
&gpt4_fck,
&gpt5_ick,
&gpt5_fck,
&gpt6_ick,
&gpt6_fck,
&gpt7_ick,
&gpt7_fck,
&gpt8_ick,
&gpt8_fck,
&gpt9_ick,
&gpt9_fck,
&gpt10_ick,
&gpt10_fck,
&gpt11_ick,
&gpt11_fck,
&gpt12_ick,
&gpt12_fck,
&mcbsp1_ick,
&mcbsp1_fck,
&mcbsp2_ick,
&mcbsp2_fck,
&mcbsp3_ick,
&mcbsp3_fck,
&mcbsp4_ick,
&mcbsp4_fck,
&mcbsp5_ick,
&mcbsp5_fck,
&mcspi1_ick,
&mcspi1_fck,
&mcspi2_ick,
&mcspi2_fck,
&mcspi3_ick,
&mcspi3_fck,
&uart1_ick,
&uart1_fck,
&uart2_ick,
&uart2_fck,
&uart3_ick,
&uart3_fck,
&gpios_ick,
&gpios_fck,
&mpu_wdt_ick,
&mpu_wdt_fck,
&sync_32k_ick,
&wdt1_ick,
&omapctrl_ick,
&icr_ick,
&cam_fck,
&cam_ick,
&mailboxes_ick,
&wdt4_ick,
&wdt4_fck,
&wdt3_ick,
&wdt3_fck,
&mspro_ick,
&mspro_fck,
&mmc_ick,
&mmc_fck,
&fac_ick,
&fac_fck,
&eac_ick,
&eac_fck,
&hdq_ick,
&hdq_fck,
&i2c1_ick,
&i2c1_fck,
&i2chs1_fck,
&i2c2_ick,
&i2c2_fck,
&i2chs2_fck,
&vlynq_ick,
&vlynq_fck,
&sdrc_ick,
&des_ick,
&sha_ick,
&rng_ick,
&aes_ick,
&pka_ick,
&usb_fck,
&usbhs_ick,
&mmchs1_ick,
&mmchs1_fck,
&mmchs2_ick,
&mmchs2_fck,
&gpio5_ick,
&gpio5_fck,
&mdm_intc_ick,
&mmchsdb1_fck,
&mmchsdb2_fck,
};
#endif