kernel-ark/include/linux/mtd/bbm.h
Kyungmin Park 211ac75f5e [MTD] OneNAND: Error message printing and bad block scan erros
Provide the bad block scan with its own read function so that important error
messages that are not from the the bad block scan, can always be printed.

Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2007-02-07 12:15:01 +09:00

133 lines
4.3 KiB
C

/*
* linux/include/linux/mtd/bbm.h
*
* NAND family Bad Block Management (BBM) header file
* - Bad Block Table (BBT) implementation
*
* Copyright (c) 2005 Samsung Electronics
* Kyungmin Park <kyungmin.park@samsung.com>
*
* Copyright (c) 2000-2005
* Thomas Gleixner <tglx@linuxtronix.de>
*
*/
#ifndef __LINUX_MTD_BBM_H
#define __LINUX_MTD_BBM_H
/* The maximum number of NAND chips in an array */
#define NAND_MAX_CHIPS 8
/**
* struct nand_bbt_descr - bad block table descriptor
* @options: options for this descriptor
* @pages: the page(s) where we find the bbt, used with
* option BBT_ABSPAGE when bbt is searched,
* then we store the found bbts pages here.
* Its an array and supports up to 8 chips now
* @offs: offset of the pattern in the oob area of the page
* @veroffs: offset of the bbt version counter in the oob area of the page
* @version: version read from the bbt page during scan
* @len: length of the pattern, if 0 no pattern check is performed
* @maxblocks: maximum number of blocks to search for a bbt. This
* number of blocks is reserved at the end of the device
* where the tables are written.
* @reserved_block_code: if non-0, this pattern denotes a reserved
* (rather than bad) block in the stored bbt
* @pattern: pattern to identify bad block table or factory marked
* good / bad blocks, can be NULL, if len = 0
*
* Descriptor for the bad block table marker and the descriptor for the
* pattern which identifies good and bad blocks. The assumption is made
* that the pattern and the version count are always located in the oob area
* of the first block.
*/
struct nand_bbt_descr {
int options;
int pages[NAND_MAX_CHIPS];
int offs;
int veroffs;
uint8_t version[NAND_MAX_CHIPS];
int len;
int maxblocks;
int reserved_block_code;
uint8_t *pattern;
};
/* Options for the bad block table descriptors */
/* The number of bits used per block in the bbt on the device */
#define NAND_BBT_NRBITS_MSK 0x0000000F
#define NAND_BBT_1BIT 0x00000001
#define NAND_BBT_2BIT 0x00000002
#define NAND_BBT_4BIT 0x00000004
#define NAND_BBT_8BIT 0x00000008
/* The bad block table is in the last good block of the device */
#define NAND_BBT_LASTBLOCK 0x00000010
/* The bbt is at the given page, else we must scan for the bbt */
#define NAND_BBT_ABSPAGE 0x00000020
/* The bbt is at the given page, else we must scan for the bbt */
#define NAND_BBT_SEARCH 0x00000040
/* bbt is stored per chip on multichip devices */
#define NAND_BBT_PERCHIP 0x00000080
/* bbt has a version counter at offset veroffs */
#define NAND_BBT_VERSION 0x00000100
/* Create a bbt if none axists */
#define NAND_BBT_CREATE 0x00000200
/* Search good / bad pattern through all pages of a block */
#define NAND_BBT_SCANALLPAGES 0x00000400
/* Scan block empty during good / bad block scan */
#define NAND_BBT_SCANEMPTY 0x00000800
/* Write bbt if neccecary */
#define NAND_BBT_WRITE 0x00001000
/* Read and write back block contents when writing bbt */
#define NAND_BBT_SAVECONTENT 0x00002000
/* Search good / bad pattern on the first and the second page */
#define NAND_BBT_SCAN2NDPAGE 0x00004000
/* The maximum number of blocks to scan for a bbt */
#define NAND_BBT_SCAN_MAXBLOCKS 4
/*
* Constants for oob configuration
*/
#define ONENAND_BADBLOCK_POS 0
/*
* Bad block scanning errors
*/
#define ONENAND_BBT_READ_ERROR 1
#define ONENAND_BBT_READ_ECC_ERROR 2
#define ONENAND_BBT_READ_FATAL_ERROR 4
/**
* struct bbm_info - [GENERIC] Bad Block Table data structure
* @bbt_erase_shift: [INTERN] number of address bits in a bbt entry
* @badblockpos: [INTERN] position of the bad block marker in the oob area
* @options: options for this descriptor
* @bbt: [INTERN] bad block table pointer
* @isbad_bbt: function to determine if a block is bad
* @badblock_pattern: [REPLACEABLE] bad block scan pattern used for
* initial bad block scan
* @priv: [OPTIONAL] pointer to private bbm date
*/
struct bbm_info {
int bbt_erase_shift;
int badblockpos;
int options;
uint8_t *bbt;
int (*isbad_bbt)(struct mtd_info *mtd, loff_t ofs, int allowbbt);
/* TODO Add more NAND specific fileds */
struct nand_bbt_descr *badblock_pattern;
void *priv;
};
/* OneNAND BBT interface */
extern int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
extern int onenand_default_bbt(struct mtd_info *mtd);
#endif /* __LINUX_MTD_BBM_H */