kernel-ark/arch/x86/kernel/pci-dma.c
Linus Torvalds a66a50054e Merge branch 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (59 commits)
  x86/gart: Do not select AGP for GART_IOMMU
  x86/amd-iommu: Initialize passthrough mode when requested
  x86/amd-iommu: Don't detach device from pt domain on driver unbind
  x86/amd-iommu: Make sure a device is assigned in passthrough mode
  x86/amd-iommu: Align locking between attach_device and detach_device
  x86/amd-iommu: Fix device table write order
  x86/amd-iommu: Add passthrough mode initialization functions
  x86/amd-iommu: Add core functions for pd allocation/freeing
  x86/dma: Mark iommu_pass_through as __read_mostly
  x86/amd-iommu: Change iommu_map_page to support multiple page sizes
  x86/amd-iommu: Support higher level PTEs in iommu_page_unmap
  x86/amd-iommu: Remove old page table handling macros
  x86/amd-iommu: Use 2-level page tables for dma_ops domains
  x86/amd-iommu: Remove bus_addr check in iommu_map_page
  x86/amd-iommu: Remove last usages of IOMMU_PTE_L0_INDEX
  x86/amd-iommu: Change alloc_pte to support 64 bit address space
  x86/amd-iommu: Introduce increase_address_space function
  x86/amd-iommu: Flush domains if address space size was increased
  x86/amd-iommu: Introduce set_dte_entry function
  x86/amd-iommu: Add a gneric version of amd_iommu_flush_all_devices
  ...
2009-09-11 13:16:37 -07:00

330 lines
7.3 KiB
C

#include <linux/dma-mapping.h>
#include <linux/dma-debug.h>
#include <linux/dmar.h>
#include <linux/bootmem.h>
#include <linux/pci.h>
#include <linux/kmemleak.h>
#include <asm/proto.h>
#include <asm/dma.h>
#include <asm/iommu.h>
#include <asm/gart.h>
#include <asm/calgary.h>
#include <asm/amd_iommu.h>
static int forbid_dac __read_mostly;
struct dma_map_ops *dma_ops;
EXPORT_SYMBOL(dma_ops);
static int iommu_sac_force __read_mostly;
#ifdef CONFIG_IOMMU_DEBUG
int panic_on_overflow __read_mostly = 1;
int force_iommu __read_mostly = 1;
#else
int panic_on_overflow __read_mostly = 0;
int force_iommu __read_mostly = 0;
#endif
int iommu_merge __read_mostly = 0;
int no_iommu __read_mostly;
/* Set this to 1 if there is a HW IOMMU in the system */
int iommu_detected __read_mostly = 0;
/*
* This variable becomes 1 if iommu=pt is passed on the kernel command line.
* If this variable is 1, IOMMU implementations do no DMA ranslation for
* devices and allow every device to access to whole physical memory. This is
* useful if a user want to use an IOMMU only for KVM device assignment to
* guests and not for driver dma translation.
*/
int iommu_pass_through __read_mostly;
dma_addr_t bad_dma_address __read_mostly = 0;
EXPORT_SYMBOL(bad_dma_address);
/* Dummy device used for NULL arguments (normally ISA). Better would
be probably a smaller DMA mask, but this is bug-to-bug compatible
to older i386. */
struct device x86_dma_fallback_dev = {
.init_name = "fallback device",
.coherent_dma_mask = DMA_BIT_MASK(32),
.dma_mask = &x86_dma_fallback_dev.coherent_dma_mask,
};
EXPORT_SYMBOL(x86_dma_fallback_dev);
/* Number of entries preallocated for DMA-API debugging */
#define PREALLOC_DMA_DEBUG_ENTRIES 32768
int dma_set_mask(struct device *dev, u64 mask)
{
if (!dev->dma_mask || !dma_supported(dev, mask))
return -EIO;
*dev->dma_mask = mask;
return 0;
}
EXPORT_SYMBOL(dma_set_mask);
#ifdef CONFIG_X86_64
static __initdata void *dma32_bootmem_ptr;
static unsigned long dma32_bootmem_size __initdata = (128ULL<<20);
static int __init parse_dma32_size_opt(char *p)
{
if (!p)
return -EINVAL;
dma32_bootmem_size = memparse(p, &p);
return 0;
}
early_param("dma32_size", parse_dma32_size_opt);
void __init dma32_reserve_bootmem(void)
{
unsigned long size, align;
if (max_pfn <= MAX_DMA32_PFN)
return;
/*
* check aperture_64.c allocate_aperture() for reason about
* using 512M as goal
*/
align = 64ULL<<20;
size = roundup(dma32_bootmem_size, align);
dma32_bootmem_ptr = __alloc_bootmem_nopanic(size, align,
512ULL<<20);
/*
* Kmemleak should not scan this block as it may not be mapped via the
* kernel direct mapping.
*/
kmemleak_ignore(dma32_bootmem_ptr);
if (dma32_bootmem_ptr)
dma32_bootmem_size = size;
else
dma32_bootmem_size = 0;
}
static void __init dma32_free_bootmem(void)
{
if (max_pfn <= MAX_DMA32_PFN)
return;
if (!dma32_bootmem_ptr)
return;
free_bootmem(__pa(dma32_bootmem_ptr), dma32_bootmem_size);
dma32_bootmem_ptr = NULL;
dma32_bootmem_size = 0;
}
#endif
void __init pci_iommu_alloc(void)
{
#ifdef CONFIG_X86_64
/* free the range so iommu could get some range less than 4G */
dma32_free_bootmem();
#endif
/*
* The order of these functions is important for
* fall-back/fail-over reasons
*/
gart_iommu_hole_init();
detect_calgary();
detect_intel_iommu();
amd_iommu_detect();
pci_swiotlb_init();
}
void *dma_generic_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_addr, gfp_t flag)
{
unsigned long dma_mask;
struct page *page;
dma_addr_t addr;
dma_mask = dma_alloc_coherent_mask(dev, flag);
flag |= __GFP_ZERO;
again:
page = alloc_pages_node(dev_to_node(dev), flag, get_order(size));
if (!page)
return NULL;
addr = page_to_phys(page);
if (addr + size > dma_mask) {
__free_pages(page, get_order(size));
if (dma_mask < DMA_BIT_MASK(32) && !(flag & GFP_DMA)) {
flag = (flag & ~GFP_DMA32) | GFP_DMA;
goto again;
}
return NULL;
}
*dma_addr = addr;
return page_address(page);
}
/*
* See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter
* documentation.
*/
static __init int iommu_setup(char *p)
{
iommu_merge = 1;
if (!p)
return -EINVAL;
while (*p) {
if (!strncmp(p, "off", 3))
no_iommu = 1;
/* gart_parse_options has more force support */
if (!strncmp(p, "force", 5))
force_iommu = 1;
if (!strncmp(p, "noforce", 7)) {
iommu_merge = 0;
force_iommu = 0;
}
if (!strncmp(p, "biomerge", 8)) {
iommu_merge = 1;
force_iommu = 1;
}
if (!strncmp(p, "panic", 5))
panic_on_overflow = 1;
if (!strncmp(p, "nopanic", 7))
panic_on_overflow = 0;
if (!strncmp(p, "merge", 5)) {
iommu_merge = 1;
force_iommu = 1;
}
if (!strncmp(p, "nomerge", 7))
iommu_merge = 0;
if (!strncmp(p, "forcesac", 8))
iommu_sac_force = 1;
if (!strncmp(p, "allowdac", 8))
forbid_dac = 0;
if (!strncmp(p, "nodac", 5))
forbid_dac = -1;
if (!strncmp(p, "usedac", 6)) {
forbid_dac = -1;
return 1;
}
#ifdef CONFIG_SWIOTLB
if (!strncmp(p, "soft", 4))
swiotlb = 1;
#endif
if (!strncmp(p, "pt", 2)) {
iommu_pass_through = 1;
return 1;
}
gart_parse_options(p);
#ifdef CONFIG_CALGARY_IOMMU
if (!strncmp(p, "calgary", 7))
use_calgary = 1;
#endif /* CONFIG_CALGARY_IOMMU */
p += strcspn(p, ",");
if (*p == ',')
++p;
}
return 0;
}
early_param("iommu", iommu_setup);
int dma_supported(struct device *dev, u64 mask)
{
struct dma_map_ops *ops = get_dma_ops(dev);
#ifdef CONFIG_PCI
if (mask > 0xffffffff && forbid_dac > 0) {
dev_info(dev, "PCI: Disallowing DAC for device\n");
return 0;
}
#endif
if (ops->dma_supported)
return ops->dma_supported(dev, mask);
/* Copied from i386. Doesn't make much sense, because it will
only work for pci_alloc_coherent.
The caller just has to use GFP_DMA in this case. */
if (mask < DMA_BIT_MASK(24))
return 0;
/* Tell the device to use SAC when IOMMU force is on. This
allows the driver to use cheaper accesses in some cases.
Problem with this is that if we overflow the IOMMU area and
return DAC as fallback address the device may not handle it
correctly.
As a special case some controllers have a 39bit address
mode that is as efficient as 32bit (aic79xx). Don't force
SAC for these. Assume all masks <= 40 bits are of this
type. Normally this doesn't make any difference, but gives
more gentle handling of IOMMU overflow. */
if (iommu_sac_force && (mask >= DMA_BIT_MASK(40))) {
dev_info(dev, "Force SAC with mask %Lx\n", mask);
return 0;
}
return 1;
}
EXPORT_SYMBOL(dma_supported);
static int __init pci_iommu_init(void)
{
dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES);
#ifdef CONFIG_PCI
dma_debug_add_bus(&pci_bus_type);
#endif
calgary_iommu_init();
intel_iommu_init();
amd_iommu_init();
gart_iommu_init();
no_iommu_init();
return 0;
}
void pci_iommu_shutdown(void)
{
gart_iommu_shutdown();
amd_iommu_shutdown();
}
/* Must execute after PCI subsystem */
fs_initcall(pci_iommu_init);
#ifdef CONFIG_PCI
/* Many VIA bridges seem to corrupt data for DAC. Disable it here */
static __devinit void via_no_dac(struct pci_dev *dev)
{
if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) {
dev_info(&dev->dev, "disabling DAC on VIA PCI bridge\n");
forbid_dac = 1;
}
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac);
#endif