kernel-ark/drivers/hid/hid-picolcd.c
Bruno Prémont 1778ca298b HID: picolcd: correct ordering of framebuffer freeing
Fix the free() ordering (which was never reached due to wrong check).

Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-06 14:53:10 +02:00

2765 lines
77 KiB
C

/***************************************************************************
* Copyright (C) 2010 by Bruno Prémont <bonbons@linux-vserver.org> *
* *
* Based on Logitech G13 driver (v0.4) *
* Copyright (C) 2009 by Rick L. Vinyard, Jr. <rvinyard@cs.nmsu.edu> *
* *
* This program is free software: you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation, version 2 of the License. *
* *
* This driver is distributed in the hope that it will be useful, but *
* WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU *
* General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this software. If not see <http://www.gnu.org/licenses/>. *
***************************************************************************/
#include <linux/hid.h>
#include <linux/hid-debug.h>
#include <linux/input.h>
#include "hid-ids.h"
#include "usbhid/usbhid.h"
#include <linux/usb.h>
#include <linux/fb.h>
#include <linux/vmalloc.h>
#include <linux/backlight.h>
#include <linux/lcd.h>
#include <linux/leds.h>
#include <linux/seq_file.h>
#include <linux/debugfs.h>
#include <linux/completion.h>
#include <linux/uaccess.h>
#define PICOLCD_NAME "PicoLCD (graphic)"
/* Report numbers */
#define REPORT_ERROR_CODE 0x10 /* LCD: IN[16] */
#define ERR_SUCCESS 0x00
#define ERR_PARAMETER_MISSING 0x01
#define ERR_DATA_MISSING 0x02
#define ERR_BLOCK_READ_ONLY 0x03
#define ERR_BLOCK_NOT_ERASABLE 0x04
#define ERR_BLOCK_TOO_BIG 0x05
#define ERR_SECTION_OVERFLOW 0x06
#define ERR_INVALID_CMD_LEN 0x07
#define ERR_INVALID_DATA_LEN 0x08
#define REPORT_KEY_STATE 0x11 /* LCD: IN[2] */
#define REPORT_IR_DATA 0x21 /* LCD: IN[63] */
#define REPORT_EE_DATA 0x32 /* LCD: IN[63] */
#define REPORT_MEMORY 0x41 /* LCD: IN[63] */
#define REPORT_LED_STATE 0x81 /* LCD: OUT[1] */
#define REPORT_BRIGHTNESS 0x91 /* LCD: OUT[1] */
#define REPORT_CONTRAST 0x92 /* LCD: OUT[1] */
#define REPORT_RESET 0x93 /* LCD: OUT[2] */
#define REPORT_LCD_CMD 0x94 /* LCD: OUT[63] */
#define REPORT_LCD_DATA 0x95 /* LCD: OUT[63] */
#define REPORT_LCD_CMD_DATA 0x96 /* LCD: OUT[63] */
#define REPORT_EE_READ 0xa3 /* LCD: OUT[63] */
#define REPORT_EE_WRITE 0xa4 /* LCD: OUT[63] */
#define REPORT_ERASE_MEMORY 0xb2 /* LCD: OUT[2] */
#define REPORT_READ_MEMORY 0xb3 /* LCD: OUT[3] */
#define REPORT_WRITE_MEMORY 0xb4 /* LCD: OUT[63] */
#define REPORT_SPLASH_RESTART 0xc1 /* LCD: OUT[1] */
#define REPORT_EXIT_KEYBOARD 0xef /* LCD: OUT[2] */
#define REPORT_VERSION 0xf1 /* LCD: IN[2],OUT[1] Bootloader: IN[2],OUT[1] */
#define REPORT_BL_ERASE_MEMORY 0xf2 /* Bootloader: IN[36],OUT[4] */
#define REPORT_BL_READ_MEMORY 0xf3 /* Bootloader: IN[36],OUT[4] */
#define REPORT_BL_WRITE_MEMORY 0xf4 /* Bootloader: IN[36],OUT[36] */
#define REPORT_DEVID 0xf5 /* LCD: IN[5], OUT[1] Bootloader: IN[5],OUT[1] */
#define REPORT_SPLASH_SIZE 0xf6 /* LCD: IN[4], OUT[1] */
#define REPORT_HOOK_VERSION 0xf7 /* LCD: IN[2], OUT[1] */
#define REPORT_EXIT_FLASHER 0xff /* Bootloader: OUT[2] */
#ifdef CONFIG_HID_PICOLCD_FB
/* Framebuffer
*
* The PicoLCD use a Topway LCD module of 256x64 pixel
* This display area is tiled over 4 controllers with 8 tiles
* each. Each tile has 8x64 pixel, each data byte representing
* a 1-bit wide vertical line of the tile.
*
* The display can be updated at a tile granularity.
*
* Chip 1 Chip 2 Chip 3 Chip 4
* +----------------+----------------+----------------+----------------+
* | Tile 1 | Tile 1 | Tile 1 | Tile 1 |
* +----------------+----------------+----------------+----------------+
* | Tile 2 | Tile 2 | Tile 2 | Tile 2 |
* +----------------+----------------+----------------+----------------+
* ...
* +----------------+----------------+----------------+----------------+
* | Tile 8 | Tile 8 | Tile 8 | Tile 8 |
* +----------------+----------------+----------------+----------------+
*/
#define PICOLCDFB_NAME "picolcdfb"
#define PICOLCDFB_WIDTH (256)
#define PICOLCDFB_HEIGHT (64)
#define PICOLCDFB_SIZE (PICOLCDFB_WIDTH * PICOLCDFB_HEIGHT / 8)
#define PICOLCDFB_UPDATE_RATE_LIMIT 10
#define PICOLCDFB_UPDATE_RATE_DEFAULT 2
/* Framebuffer visual structures */
static const struct fb_fix_screeninfo picolcdfb_fix = {
.id = PICOLCDFB_NAME,
.type = FB_TYPE_PACKED_PIXELS,
.visual = FB_VISUAL_MONO01,
.xpanstep = 0,
.ypanstep = 0,
.ywrapstep = 0,
.line_length = PICOLCDFB_WIDTH / 8,
.accel = FB_ACCEL_NONE,
};
static const struct fb_var_screeninfo picolcdfb_var = {
.xres = PICOLCDFB_WIDTH,
.yres = PICOLCDFB_HEIGHT,
.xres_virtual = PICOLCDFB_WIDTH,
.yres_virtual = PICOLCDFB_HEIGHT,
.width = 103,
.height = 26,
.bits_per_pixel = 1,
.grayscale = 1,
.red = {
.offset = 0,
.length = 1,
.msb_right = 0,
},
.green = {
.offset = 0,
.length = 1,
.msb_right = 0,
},
.blue = {
.offset = 0,
.length = 1,
.msb_right = 0,
},
.transp = {
.offset = 0,
.length = 0,
.msb_right = 0,
},
};
#endif /* CONFIG_HID_PICOLCD_FB */
/* Input device
*
* The PicoLCD has an IR receiver header, a built-in keypad with 5 keys
* and header for 4x4 key matrix. The built-in keys are part of the matrix.
*/
static const unsigned short def_keymap[] = {
KEY_RESERVED, /* none */
KEY_BACK, /* col 4 + row 1 */
KEY_HOMEPAGE, /* col 3 + row 1 */
KEY_RESERVED, /* col 2 + row 1 */
KEY_RESERVED, /* col 1 + row 1 */
KEY_SCROLLUP, /* col 4 + row 2 */
KEY_OK, /* col 3 + row 2 */
KEY_SCROLLDOWN, /* col 2 + row 2 */
KEY_RESERVED, /* col 1 + row 2 */
KEY_RESERVED, /* col 4 + row 3 */
KEY_RESERVED, /* col 3 + row 3 */
KEY_RESERVED, /* col 2 + row 3 */
KEY_RESERVED, /* col 1 + row 3 */
KEY_RESERVED, /* col 4 + row 4 */
KEY_RESERVED, /* col 3 + row 4 */
KEY_RESERVED, /* col 2 + row 4 */
KEY_RESERVED, /* col 1 + row 4 */
};
#define PICOLCD_KEYS ARRAY_SIZE(def_keymap)
/* Description of in-progress IO operation, used for operations
* that trigger response from device */
struct picolcd_pending {
struct hid_report *out_report;
struct hid_report *in_report;
struct completion ready;
int raw_size;
u8 raw_data[64];
};
/* Per device data structure */
struct picolcd_data {
struct hid_device *hdev;
#ifdef CONFIG_DEBUG_FS
struct dentry *debug_reset;
struct dentry *debug_eeprom;
struct dentry *debug_flash;
struct mutex mutex_flash;
int addr_sz;
#endif
u8 version[2];
unsigned short opmode_delay;
/* input stuff */
u8 pressed_keys[2];
struct input_dev *input_keys;
struct input_dev *input_cir;
unsigned short keycode[PICOLCD_KEYS];
#ifdef CONFIG_HID_PICOLCD_FB
/* Framebuffer stuff */
u8 fb_update_rate;
u8 fb_bpp;
u8 fb_force;
u8 *fb_vbitmap; /* local copy of what was sent to PicoLCD */
u8 *fb_bitmap; /* framebuffer */
struct fb_info *fb_info;
struct fb_deferred_io fb_defio;
#endif /* CONFIG_HID_PICOLCD_FB */
#ifdef CONFIG_HID_PICOLCD_LCD
struct lcd_device *lcd;
u8 lcd_contrast;
#endif /* CONFIG_HID_PICOLCD_LCD */
#ifdef CONFIG_HID_PICOLCD_BACKLIGHT
struct backlight_device *backlight;
u8 lcd_brightness;
u8 lcd_power;
#endif /* CONFIG_HID_PICOLCD_BACKLIGHT */
#ifdef CONFIG_HID_PICOLCD_LEDS
/* LED stuff */
u8 led_state;
struct led_classdev *led[8];
#endif /* CONFIG_HID_PICOLCD_LEDS */
/* Housekeeping stuff */
spinlock_t lock;
struct mutex mutex;
struct picolcd_pending *pending;
int status;
#define PICOLCD_BOOTLOADER 1
#define PICOLCD_FAILED 2
#define PICOLCD_READY_FB 4
};
/* Find a given report */
#define picolcd_in_report(id, dev) picolcd_report(id, dev, HID_INPUT_REPORT)
#define picolcd_out_report(id, dev) picolcd_report(id, dev, HID_OUTPUT_REPORT)
static struct hid_report *picolcd_report(int id, struct hid_device *hdev, int dir)
{
struct list_head *feature_report_list = &hdev->report_enum[dir].report_list;
struct hid_report *report = NULL;
list_for_each_entry(report, feature_report_list, list) {
if (report->id == id)
return report;
}
dev_warn(&hdev->dev, "No report with id 0x%x found\n", id);
return NULL;
}
#ifdef CONFIG_DEBUG_FS
static void picolcd_debug_out_report(struct picolcd_data *data,
struct hid_device *hdev, struct hid_report *report);
#define usbhid_submit_report(a, b, c) \
do { \
picolcd_debug_out_report(hid_get_drvdata(a), a, b); \
usbhid_submit_report(a, b, c); \
} while (0)
#endif
/* Submit a report and wait for a reply from device - if device fades away
* or does not respond in time, return NULL */
static struct picolcd_pending *picolcd_send_and_wait(struct hid_device *hdev,
int report_id, const u8 *raw_data, int size)
{
struct picolcd_data *data = hid_get_drvdata(hdev);
struct picolcd_pending *work;
struct hid_report *report = picolcd_out_report(report_id, hdev);
unsigned long flags;
int i, j, k;
if (!report || !data)
return NULL;
if (data->status & PICOLCD_FAILED)
return NULL;
work = kzalloc(sizeof(*work), GFP_KERNEL);
if (!work)
return NULL;
init_completion(&work->ready);
work->out_report = report;
work->in_report = NULL;
work->raw_size = 0;
mutex_lock(&data->mutex);
spin_lock_irqsave(&data->lock, flags);
for (i = k = 0; i < report->maxfield; i++)
for (j = 0; j < report->field[i]->report_count; j++) {
hid_set_field(report->field[i], j, k < size ? raw_data[k] : 0);
k++;
}
data->pending = work;
usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
spin_unlock_irqrestore(&data->lock, flags);
wait_for_completion_interruptible_timeout(&work->ready, HZ*2);
spin_lock_irqsave(&data->lock, flags);
data->pending = NULL;
spin_unlock_irqrestore(&data->lock, flags);
mutex_unlock(&data->mutex);
return work;
}
#ifdef CONFIG_HID_PICOLCD_FB
/* Send a given tile to PicoLCD */
static int picolcd_fb_send_tile(struct hid_device *hdev, int chip, int tile)
{
struct picolcd_data *data = hid_get_drvdata(hdev);
struct hid_report *report1 = picolcd_out_report(REPORT_LCD_CMD_DATA, hdev);
struct hid_report *report2 = picolcd_out_report(REPORT_LCD_DATA, hdev);
unsigned long flags;
u8 *tdata;
int i;
if (!report1 || report1->maxfield != 1 || !report2 || report2->maxfield != 1)
return -ENODEV;
spin_lock_irqsave(&data->lock, flags);
hid_set_field(report1->field[0], 0, chip << 2);
hid_set_field(report1->field[0], 1, 0x02);
hid_set_field(report1->field[0], 2, 0x00);
hid_set_field(report1->field[0], 3, 0x00);
hid_set_field(report1->field[0], 4, 0xb8 | tile);
hid_set_field(report1->field[0], 5, 0x00);
hid_set_field(report1->field[0], 6, 0x00);
hid_set_field(report1->field[0], 7, 0x40);
hid_set_field(report1->field[0], 8, 0x00);
hid_set_field(report1->field[0], 9, 0x00);
hid_set_field(report1->field[0], 10, 32);
hid_set_field(report2->field[0], 0, (chip << 2) | 0x01);
hid_set_field(report2->field[0], 1, 0x00);
hid_set_field(report2->field[0], 2, 0x00);
hid_set_field(report2->field[0], 3, 32);
tdata = data->fb_vbitmap + (tile * 4 + chip) * 64;
for (i = 0; i < 64; i++)
if (i < 32)
hid_set_field(report1->field[0], 11 + i, tdata[i]);
else
hid_set_field(report2->field[0], 4 + i - 32, tdata[i]);
usbhid_submit_report(data->hdev, report1, USB_DIR_OUT);
usbhid_submit_report(data->hdev, report2, USB_DIR_OUT);
spin_unlock_irqrestore(&data->lock, flags);
return 0;
}
/* Translate a single tile*/
static int picolcd_fb_update_tile(u8 *vbitmap, const u8 *bitmap, int bpp,
int chip, int tile)
{
int i, b, changed = 0;
u8 tdata[64];
u8 *vdata = vbitmap + (tile * 4 + chip) * 64;
if (bpp == 1) {
for (b = 7; b >= 0; b--) {
const u8 *bdata = bitmap + tile * 256 + chip * 8 + b * 32;
for (i = 0; i < 64; i++) {
tdata[i] <<= 1;
tdata[i] |= (bdata[i/8] >> (i % 8)) & 0x01;
}
}
} else if (bpp == 8) {
for (b = 7; b >= 0; b--) {
const u8 *bdata = bitmap + (tile * 256 + chip * 8 + b * 32) * 8;
for (i = 0; i < 64; i++) {
tdata[i] <<= 1;
tdata[i] |= (bdata[i] & 0x80) ? 0x01 : 0x00;
}
}
} else {
/* Oops, we should never get here! */
WARN_ON(1);
return 0;
}
for (i = 0; i < 64; i++)
if (tdata[i] != vdata[i]) {
changed = 1;
vdata[i] = tdata[i];
}
return changed;
}
/* Reconfigure LCD display */
static int picolcd_fb_reset(struct picolcd_data *data, int clear)
{
struct hid_report *report = picolcd_out_report(REPORT_LCD_CMD, data->hdev);
int i, j;
unsigned long flags;
static const u8 mapcmd[8] = { 0x00, 0x02, 0x00, 0x64, 0x3f, 0x00, 0x64, 0xc0 };
if (!report || report->maxfield != 1)
return -ENODEV;
spin_lock_irqsave(&data->lock, flags);
for (i = 0; i < 4; i++) {
for (j = 0; j < report->field[0]->maxusage; j++)
if (j == 0)
hid_set_field(report->field[0], j, i << 2);
else if (j < sizeof(mapcmd))
hid_set_field(report->field[0], j, mapcmd[j]);
else
hid_set_field(report->field[0], j, 0);
usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
}
data->status |= PICOLCD_READY_FB;
spin_unlock_irqrestore(&data->lock, flags);
if (data->fb_bitmap) {
if (clear) {
memset(data->fb_vbitmap, 0, PICOLCDFB_SIZE);
memset(data->fb_bitmap, 0, PICOLCDFB_SIZE*data->fb_bpp);
}
data->fb_force = 1;
}
/* schedule first output of framebuffer */
if (data->fb_info)
schedule_delayed_work(&data->fb_info->deferred_work, 0);
return 0;
}
/* Update fb_vbitmap from the screen_base and send changed tiles to device */
static void picolcd_fb_update(struct picolcd_data *data)
{
int chip, tile, n;
unsigned long flags;
if (!data)
return;
spin_lock_irqsave(&data->lock, flags);
if (!(data->status & PICOLCD_READY_FB)) {
spin_unlock_irqrestore(&data->lock, flags);
picolcd_fb_reset(data, 0);
} else {
spin_unlock_irqrestore(&data->lock, flags);
}
/*
* Translate the framebuffer into the format needed by the PicoLCD.
* See display layout above.
* Do this one tile after the other and push those tiles that changed.
*
* Wait for our IO to complete as otherwise we might flood the queue!
*/
n = 0;
for (chip = 0; chip < 4; chip++)
for (tile = 0; tile < 8; tile++)
if (picolcd_fb_update_tile(data->fb_vbitmap,
data->fb_bitmap, data->fb_bpp, chip, tile) ||
data->fb_force) {
n += 2;
if (!data->fb_info->par)
return; /* device lost! */
if (n >= HID_OUTPUT_FIFO_SIZE / 2) {
usbhid_wait_io(data->hdev);
n = 0;
}
picolcd_fb_send_tile(data->hdev, chip, tile);
}
data->fb_force = false;
if (n)
usbhid_wait_io(data->hdev);
}
/* Stub to call the system default and update the image on the picoLCD */
static void picolcd_fb_fillrect(struct fb_info *info,
const struct fb_fillrect *rect)
{
if (!info->par)
return;
sys_fillrect(info, rect);
schedule_delayed_work(&info->deferred_work, 0);
}
/* Stub to call the system default and update the image on the picoLCD */
static void picolcd_fb_copyarea(struct fb_info *info,
const struct fb_copyarea *area)
{
if (!info->par)
return;
sys_copyarea(info, area);
schedule_delayed_work(&info->deferred_work, 0);
}
/* Stub to call the system default and update the image on the picoLCD */
static void picolcd_fb_imageblit(struct fb_info *info, const struct fb_image *image)
{
if (!info->par)
return;
sys_imageblit(info, image);
schedule_delayed_work(&info->deferred_work, 0);
}
/*
* this is the slow path from userspace. they can seek and write to
* the fb. it's inefficient to do anything less than a full screen draw
*/
static ssize_t picolcd_fb_write(struct fb_info *info, const char __user *buf,
size_t count, loff_t *ppos)
{
ssize_t ret;
if (!info->par)
return -ENODEV;
ret = fb_sys_write(info, buf, count, ppos);
if (ret >= 0)
schedule_delayed_work(&info->deferred_work, 0);
return ret;
}
static int picolcd_fb_blank(int blank, struct fb_info *info)
{
if (!info->par)
return -ENODEV;
/* We let fb notification do this for us via lcd/backlight device */
return 0;
}
static void picolcd_fb_destroy(struct fb_info *info)
{
struct picolcd_data *data = info->par;
u32 *ref_cnt = info->pseudo_palette;
int may_release;
info->par = NULL;
if (data)
data->fb_info = NULL;
fb_deferred_io_cleanup(info);
ref_cnt--;
mutex_lock(&info->lock);
(*ref_cnt)--;
may_release = !*ref_cnt;
mutex_unlock(&info->lock);
if (may_release) {
vfree((u8 *)info->fix.smem_start);
framebuffer_release(info);
}
}
static int picolcd_fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
{
__u32 bpp = var->bits_per_pixel;
__u32 activate = var->activate;
/* only allow 1/8 bit depth (8-bit is grayscale) */
*var = picolcdfb_var;
var->activate = activate;
if (bpp >= 8) {
var->bits_per_pixel = 8;
var->red.length = 8;
var->green.length = 8;
var->blue.length = 8;
} else {
var->bits_per_pixel = 1;
var->red.length = 1;
var->green.length = 1;
var->blue.length = 1;
}
return 0;
}
static int picolcd_set_par(struct fb_info *info)
{
struct picolcd_data *data = info->par;
u8 *tmp_fb, *o_fb;
if (!data)
return -ENODEV;
if (info->var.bits_per_pixel == data->fb_bpp)
return 0;
/* switch between 1/8 bit depths */
if (info->var.bits_per_pixel != 1 && info->var.bits_per_pixel != 8)
return -EINVAL;
o_fb = data->fb_bitmap;
tmp_fb = kmalloc(PICOLCDFB_SIZE*info->var.bits_per_pixel, GFP_KERNEL);
if (!tmp_fb)
return -ENOMEM;
/* translate FB content to new bits-per-pixel */
if (info->var.bits_per_pixel == 1) {
int i, b;
for (i = 0; i < PICOLCDFB_SIZE; i++) {
u8 p = 0;
for (b = 0; b < 8; b++) {
p <<= 1;
p |= o_fb[i*8+b] ? 0x01 : 0x00;
}
tmp_fb[i] = p;
}
memcpy(o_fb, tmp_fb, PICOLCDFB_SIZE);
info->fix.visual = FB_VISUAL_MONO01;
info->fix.line_length = PICOLCDFB_WIDTH / 8;
} else {
int i;
memcpy(tmp_fb, o_fb, PICOLCDFB_SIZE);
for (i = 0; i < PICOLCDFB_SIZE * 8; i++)
o_fb[i] = tmp_fb[i/8] & (0x01 << (7 - i % 8)) ? 0xff : 0x00;
info->fix.visual = FB_VISUAL_DIRECTCOLOR;
info->fix.line_length = PICOLCDFB_WIDTH;
}
kfree(tmp_fb);
data->fb_bpp = info->var.bits_per_pixel;
return 0;
}
/* Do refcounting on our FB and cleanup per worker if FB is
* closed after unplug of our device
* (fb_release holds info->lock and still touches info after
* we return so we can't release it immediately.
*/
struct picolcd_fb_cleanup_item {
struct fb_info *info;
struct picolcd_fb_cleanup_item *next;
};
static struct picolcd_fb_cleanup_item *fb_pending;
DEFINE_SPINLOCK(fb_pending_lock);
static void picolcd_fb_do_cleanup(struct work_struct *data)
{
struct picolcd_fb_cleanup_item *item;
unsigned long flags;
do {
spin_lock_irqsave(&fb_pending_lock, flags);
item = fb_pending;
fb_pending = item ? item->next : NULL;
spin_unlock_irqrestore(&fb_pending_lock, flags);
if (item) {
u8 *fb = (u8 *)item->info->fix.smem_start;
/* make sure we do not race against fb core when
* releasing */
mutex_lock(&item->info->lock);
mutex_unlock(&item->info->lock);
framebuffer_release(item->info);
vfree(fb);
}
} while (item);
}
DECLARE_WORK(picolcd_fb_cleanup, picolcd_fb_do_cleanup);
static int picolcd_fb_open(struct fb_info *info, int u)
{
u32 *ref_cnt = info->pseudo_palette;
ref_cnt--;
(*ref_cnt)++;
return 0;
}
static int picolcd_fb_release(struct fb_info *info, int u)
{
u32 *ref_cnt = info->pseudo_palette;
ref_cnt--;
(*ref_cnt)++;
if (!*ref_cnt) {
unsigned long flags;
struct picolcd_fb_cleanup_item *item = (struct picolcd_fb_cleanup_item *)ref_cnt;
item--;
spin_lock_irqsave(&fb_pending_lock, flags);
item->next = fb_pending;
fb_pending = item;
spin_unlock_irqrestore(&fb_pending_lock, flags);
schedule_work(&picolcd_fb_cleanup);
}
return 0;
}
/* Note this can't be const because of struct fb_info definition */
static struct fb_ops picolcdfb_ops = {
.owner = THIS_MODULE,
.fb_destroy = picolcd_fb_destroy,
.fb_open = picolcd_fb_open,
.fb_release = picolcd_fb_release,
.fb_read = fb_sys_read,
.fb_write = picolcd_fb_write,
.fb_blank = picolcd_fb_blank,
.fb_fillrect = picolcd_fb_fillrect,
.fb_copyarea = picolcd_fb_copyarea,
.fb_imageblit = picolcd_fb_imageblit,
.fb_check_var = picolcd_fb_check_var,
.fb_set_par = picolcd_set_par,
};
/* Callback from deferred IO workqueue */
static void picolcd_fb_deferred_io(struct fb_info *info, struct list_head *pagelist)
{
picolcd_fb_update(info->par);
}
static const struct fb_deferred_io picolcd_fb_defio = {
.delay = HZ / PICOLCDFB_UPDATE_RATE_DEFAULT,
.deferred_io = picolcd_fb_deferred_io,
};
/*
* The "fb_update_rate" sysfs attribute
*/
static ssize_t picolcd_fb_update_rate_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct picolcd_data *data = dev_get_drvdata(dev);
unsigned i, fb_update_rate = data->fb_update_rate;
size_t ret = 0;
for (i = 1; i <= PICOLCDFB_UPDATE_RATE_LIMIT; i++)
if (ret >= PAGE_SIZE)
break;
else if (i == fb_update_rate)
ret += snprintf(buf+ret, PAGE_SIZE-ret, "[%u] ", i);
else
ret += snprintf(buf+ret, PAGE_SIZE-ret, "%u ", i);
if (ret > 0)
buf[min(ret, (size_t)PAGE_SIZE)-1] = '\n';
return ret;
}
static ssize_t picolcd_fb_update_rate_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct picolcd_data *data = dev_get_drvdata(dev);
int i;
unsigned u;
if (count < 1 || count > 10)
return -EINVAL;
i = sscanf(buf, "%u", &u);
if (i != 1)
return -EINVAL;
if (u > PICOLCDFB_UPDATE_RATE_LIMIT)
return -ERANGE;
else if (u == 0)
u = PICOLCDFB_UPDATE_RATE_DEFAULT;
data->fb_update_rate = u;
data->fb_defio.delay = HZ / data->fb_update_rate;
return count;
}
static DEVICE_ATTR(fb_update_rate, 0666, picolcd_fb_update_rate_show,
picolcd_fb_update_rate_store);
/* initialize Framebuffer device */
static int picolcd_init_framebuffer(struct picolcd_data *data)
{
struct device *dev = &data->hdev->dev;
struct fb_info *info = NULL;
int i, error = -ENOMEM;
u8 *fb_vbitmap = NULL;
u8 *fb_bitmap = NULL;
u32 *palette;
fb_bitmap = vmalloc(PICOLCDFB_SIZE*8);
if (fb_bitmap == NULL) {
dev_err(dev, "can't get a free page for framebuffer\n");
goto err_nomem;
}
fb_vbitmap = kmalloc(PICOLCDFB_SIZE, GFP_KERNEL);
if (fb_vbitmap == NULL) {
dev_err(dev, "can't alloc vbitmap image buffer\n");
goto err_nomem;
}
data->fb_update_rate = PICOLCDFB_UPDATE_RATE_DEFAULT;
data->fb_defio = picolcd_fb_defio;
/* The extra memory is:
* - struct picolcd_fb_cleanup_item
* - u32 for ref_count
* - 256*u32 for pseudo_palette
*/
info = framebuffer_alloc(257 * sizeof(u32) + sizeof(struct picolcd_fb_cleanup_item), dev);
if (info == NULL) {
dev_err(dev, "failed to allocate a framebuffer\n");
goto err_nomem;
}
palette = info->par + sizeof(struct picolcd_fb_cleanup_item);
*palette = 1;
palette++;
for (i = 0; i < 256; i++)
palette[i] = i > 0 && i < 16 ? 0xff : 0;
info->pseudo_palette = palette;
info->fbdefio = &data->fb_defio;
info->screen_base = (char __force __iomem *)fb_bitmap;
info->fbops = &picolcdfb_ops;
info->var = picolcdfb_var;
info->fix = picolcdfb_fix;
info->fix.smem_len = PICOLCDFB_SIZE*8;
info->fix.smem_start = (unsigned long)fb_bitmap;
info->par = data;
info->flags = FBINFO_FLAG_DEFAULT;
data->fb_vbitmap = fb_vbitmap;
data->fb_bitmap = fb_bitmap;
data->fb_bpp = picolcdfb_var.bits_per_pixel;
error = picolcd_fb_reset(data, 1);
if (error) {
dev_err(dev, "failed to configure display\n");
goto err_cleanup;
}
error = device_create_file(dev, &dev_attr_fb_update_rate);
if (error) {
dev_err(dev, "failed to create sysfs attributes\n");
goto err_cleanup;
}
fb_deferred_io_init(info);
data->fb_info = info;
error = register_framebuffer(info);
if (error) {
dev_err(dev, "failed to register framebuffer\n");
goto err_sysfs;
}
/* schedule first output of framebuffer */
data->fb_force = 1;
schedule_delayed_work(&info->deferred_work, 0);
return 0;
err_sysfs:
fb_deferred_io_cleanup(info);
device_remove_file(dev, &dev_attr_fb_update_rate);
err_cleanup:
data->fb_vbitmap = NULL;
data->fb_bitmap = NULL;
data->fb_bpp = 0;
data->fb_info = NULL;
err_nomem:
framebuffer_release(info);
vfree(fb_bitmap);
kfree(fb_vbitmap);
return error;
}
static void picolcd_exit_framebuffer(struct picolcd_data *data)
{
struct fb_info *info = data->fb_info;
u8 *fb_vbitmap = data->fb_vbitmap;
if (!info)
return;
info->par = NULL;
device_remove_file(&data->hdev->dev, &dev_attr_fb_update_rate);
unregister_framebuffer(info);
data->fb_vbitmap = NULL;
data->fb_bitmap = NULL;
data->fb_bpp = 0;
data->fb_info = NULL;
kfree(fb_vbitmap);
}
#define picolcd_fbinfo(d) ((d)->fb_info)
#else
static inline int picolcd_fb_reset(struct picolcd_data *data, int clear)
{
return 0;
}
static inline int picolcd_init_framebuffer(struct picolcd_data *data)
{
return 0;
}
static inline void picolcd_exit_framebuffer(struct picolcd_data *data)
{
}
#define picolcd_fbinfo(d) NULL
#endif /* CONFIG_HID_PICOLCD_FB */
#ifdef CONFIG_HID_PICOLCD_BACKLIGHT
/*
* backlight class device
*/
static int picolcd_get_brightness(struct backlight_device *bdev)
{
struct picolcd_data *data = bl_get_data(bdev);
return data->lcd_brightness;
}
static int picolcd_set_brightness(struct backlight_device *bdev)
{
struct picolcd_data *data = bl_get_data(bdev);
struct hid_report *report = picolcd_out_report(REPORT_BRIGHTNESS, data->hdev);
unsigned long flags;
if (!report || report->maxfield != 1 || report->field[0]->report_count != 1)
return -ENODEV;
data->lcd_brightness = bdev->props.brightness & 0x0ff;
data->lcd_power = bdev->props.power;
spin_lock_irqsave(&data->lock, flags);
hid_set_field(report->field[0], 0, data->lcd_power == FB_BLANK_UNBLANK ? data->lcd_brightness : 0);
usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
spin_unlock_irqrestore(&data->lock, flags);
return 0;
}
static int picolcd_check_bl_fb(struct backlight_device *bdev, struct fb_info *fb)
{
return fb && fb == picolcd_fbinfo((struct picolcd_data *)bl_get_data(bdev));
}
static const struct backlight_ops picolcd_blops = {
.update_status = picolcd_set_brightness,
.get_brightness = picolcd_get_brightness,
.check_fb = picolcd_check_bl_fb,
};
static int picolcd_init_backlight(struct picolcd_data *data, struct hid_report *report)
{
struct device *dev = &data->hdev->dev;
struct backlight_device *bdev;
struct backlight_properties props;
if (!report)
return -ENODEV;
if (report->maxfield != 1 || report->field[0]->report_count != 1 ||
report->field[0]->report_size != 8) {
dev_err(dev, "unsupported BRIGHTNESS report");
return -EINVAL;
}
memset(&props, 0, sizeof(props));
props.max_brightness = 0xff;
bdev = backlight_device_register(dev_name(dev), dev, data,
&picolcd_blops, &props);
if (IS_ERR(bdev)) {
dev_err(dev, "failed to register backlight\n");
return PTR_ERR(bdev);
}
bdev->props.brightness = 0xff;
data->lcd_brightness = 0xff;
data->backlight = bdev;
picolcd_set_brightness(bdev);
return 0;
}
static void picolcd_exit_backlight(struct picolcd_data *data)
{
struct backlight_device *bdev = data->backlight;
data->backlight = NULL;
if (bdev)
backlight_device_unregister(bdev);
}
static inline int picolcd_resume_backlight(struct picolcd_data *data)
{
if (!data->backlight)
return 0;
return picolcd_set_brightness(data->backlight);
}
#ifdef CONFIG_PM
static void picolcd_suspend_backlight(struct picolcd_data *data)
{
int bl_power = data->lcd_power;
if (!data->backlight)
return;
data->backlight->props.power = FB_BLANK_POWERDOWN;
picolcd_set_brightness(data->backlight);
data->lcd_power = data->backlight->props.power = bl_power;
}
#endif /* CONFIG_PM */
#else
static inline int picolcd_init_backlight(struct picolcd_data *data,
struct hid_report *report)
{
return 0;
}
static inline void picolcd_exit_backlight(struct picolcd_data *data)
{
}
static inline int picolcd_resume_backlight(struct picolcd_data *data)
{
return 0;
}
static inline void picolcd_suspend_backlight(struct picolcd_data *data)
{
}
#endif /* CONFIG_HID_PICOLCD_BACKLIGHT */
#ifdef CONFIG_HID_PICOLCD_LCD
/*
* lcd class device
*/
static int picolcd_get_contrast(struct lcd_device *ldev)
{
struct picolcd_data *data = lcd_get_data(ldev);
return data->lcd_contrast;
}
static int picolcd_set_contrast(struct lcd_device *ldev, int contrast)
{
struct picolcd_data *data = lcd_get_data(ldev);
struct hid_report *report = picolcd_out_report(REPORT_CONTRAST, data->hdev);
unsigned long flags;
if (!report || report->maxfield != 1 || report->field[0]->report_count != 1)
return -ENODEV;
data->lcd_contrast = contrast & 0x0ff;
spin_lock_irqsave(&data->lock, flags);
hid_set_field(report->field[0], 0, data->lcd_contrast);
usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
spin_unlock_irqrestore(&data->lock, flags);
return 0;
}
static int picolcd_check_lcd_fb(struct lcd_device *ldev, struct fb_info *fb)
{
return fb && fb == picolcd_fbinfo((struct picolcd_data *)lcd_get_data(ldev));
}
static struct lcd_ops picolcd_lcdops = {
.get_contrast = picolcd_get_contrast,
.set_contrast = picolcd_set_contrast,
.check_fb = picolcd_check_lcd_fb,
};
static int picolcd_init_lcd(struct picolcd_data *data, struct hid_report *report)
{
struct device *dev = &data->hdev->dev;
struct lcd_device *ldev;
if (!report)
return -ENODEV;
if (report->maxfield != 1 || report->field[0]->report_count != 1 ||
report->field[0]->report_size != 8) {
dev_err(dev, "unsupported CONTRAST report");
return -EINVAL;
}
ldev = lcd_device_register(dev_name(dev), dev, data, &picolcd_lcdops);
if (IS_ERR(ldev)) {
dev_err(dev, "failed to register LCD\n");
return PTR_ERR(ldev);
}
ldev->props.max_contrast = 0x0ff;
data->lcd_contrast = 0xe5;
data->lcd = ldev;
picolcd_set_contrast(ldev, 0xe5);
return 0;
}
static void picolcd_exit_lcd(struct picolcd_data *data)
{
struct lcd_device *ldev = data->lcd;
data->lcd = NULL;
if (ldev)
lcd_device_unregister(ldev);
}
static inline int picolcd_resume_lcd(struct picolcd_data *data)
{
if (!data->lcd)
return 0;
return picolcd_set_contrast(data->lcd, data->lcd_contrast);
}
#else
static inline int picolcd_init_lcd(struct picolcd_data *data,
struct hid_report *report)
{
return 0;
}
static inline void picolcd_exit_lcd(struct picolcd_data *data)
{
}
static inline int picolcd_resume_lcd(struct picolcd_data *data)
{
return 0;
}
#endif /* CONFIG_HID_PICOLCD_LCD */
#ifdef CONFIG_HID_PICOLCD_LEDS
/**
* LED class device
*/
static void picolcd_leds_set(struct picolcd_data *data)
{
struct hid_report *report;
unsigned long flags;
if (!data->led[0])
return;
report = picolcd_out_report(REPORT_LED_STATE, data->hdev);
if (!report || report->maxfield != 1 || report->field[0]->report_count != 1)
return;
spin_lock_irqsave(&data->lock, flags);
hid_set_field(report->field[0], 0, data->led_state);
usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
spin_unlock_irqrestore(&data->lock, flags);
}
static void picolcd_led_set_brightness(struct led_classdev *led_cdev,
enum led_brightness value)
{
struct device *dev;
struct hid_device *hdev;
struct picolcd_data *data;
int i, state = 0;
dev = led_cdev->dev->parent;
hdev = container_of(dev, struct hid_device, dev);
data = hid_get_drvdata(hdev);
for (i = 0; i < 8; i++) {
if (led_cdev != data->led[i])
continue;
state = (data->led_state >> i) & 1;
if (value == LED_OFF && state) {
data->led_state &= ~(1 << i);
picolcd_leds_set(data);
} else if (value != LED_OFF && !state) {
data->led_state |= 1 << i;
picolcd_leds_set(data);
}
break;
}
}
static enum led_brightness picolcd_led_get_brightness(struct led_classdev *led_cdev)
{
struct device *dev;
struct hid_device *hdev;
struct picolcd_data *data;
int i, value = 0;
dev = led_cdev->dev->parent;
hdev = container_of(dev, struct hid_device, dev);
data = hid_get_drvdata(hdev);
for (i = 0; i < 8; i++)
if (led_cdev == data->led[i]) {
value = (data->led_state >> i) & 1;
break;
}
return value ? LED_FULL : LED_OFF;
}
static int picolcd_init_leds(struct picolcd_data *data, struct hid_report *report)
{
struct device *dev = &data->hdev->dev;
struct led_classdev *led;
size_t name_sz = strlen(dev_name(dev)) + 8;
char *name;
int i, ret = 0;
if (!report)
return -ENODEV;
if (report->maxfield != 1 || report->field[0]->report_count != 1 ||
report->field[0]->report_size != 8) {
dev_err(dev, "unsupported LED_STATE report");
return -EINVAL;
}
for (i = 0; i < 8; i++) {
led = kzalloc(sizeof(struct led_classdev)+name_sz, GFP_KERNEL);
if (!led) {
dev_err(dev, "can't allocate memory for LED %d\n", i);
ret = -ENOMEM;
goto err;
}
name = (void *)(&led[1]);
snprintf(name, name_sz, "%s::GPO%d", dev_name(dev), i);
led->name = name;
led->brightness = 0;
led->max_brightness = 1;
led->brightness_get = picolcd_led_get_brightness;
led->brightness_set = picolcd_led_set_brightness;
data->led[i] = led;
ret = led_classdev_register(dev, data->led[i]);
if (ret) {
data->led[i] = NULL;
kfree(led);
dev_err(dev, "can't register LED %d\n", i);
goto err;
}
}
return 0;
err:
for (i = 0; i < 8; i++)
if (data->led[i]) {
led = data->led[i];
data->led[i] = NULL;
led_classdev_unregister(led);
kfree(led);
}
return ret;
}
static void picolcd_exit_leds(struct picolcd_data *data)
{
struct led_classdev *led;
int i;
for (i = 0; i < 8; i++) {
led = data->led[i];
data->led[i] = NULL;
if (!led)
continue;
led_classdev_unregister(led);
kfree(led);
}
}
#else
static inline int picolcd_init_leds(struct picolcd_data *data,
struct hid_report *report)
{
return 0;
}
static inline void picolcd_exit_leds(struct picolcd_data *data)
{
}
static inline int picolcd_leds_set(struct picolcd_data *data)
{
return 0;
}
#endif /* CONFIG_HID_PICOLCD_LEDS */
/*
* input class device
*/
static int picolcd_raw_keypad(struct picolcd_data *data,
struct hid_report *report, u8 *raw_data, int size)
{
/*
* Keypad event
* First and second data bytes list currently pressed keys,
* 0x00 means no key and at most 2 keys may be pressed at same time
*/
int i, j;
/* determine newly pressed keys */
for (i = 0; i < size; i++) {
unsigned int key_code;
if (raw_data[i] == 0)
continue;
for (j = 0; j < sizeof(data->pressed_keys); j++)
if (data->pressed_keys[j] == raw_data[i])
goto key_already_down;
for (j = 0; j < sizeof(data->pressed_keys); j++)
if (data->pressed_keys[j] == 0) {
data->pressed_keys[j] = raw_data[i];
break;
}
input_event(data->input_keys, EV_MSC, MSC_SCAN, raw_data[i]);
if (raw_data[i] < PICOLCD_KEYS)
key_code = data->keycode[raw_data[i]];
else
key_code = KEY_UNKNOWN;
if (key_code != KEY_UNKNOWN) {
dbg_hid(PICOLCD_NAME " got key press for %u:%d",
raw_data[i], key_code);
input_report_key(data->input_keys, key_code, 1);
}
input_sync(data->input_keys);
key_already_down:
continue;
}
/* determine newly released keys */
for (j = 0; j < sizeof(data->pressed_keys); j++) {
unsigned int key_code;
if (data->pressed_keys[j] == 0)
continue;
for (i = 0; i < size; i++)
if (data->pressed_keys[j] == raw_data[i])
goto key_still_down;
input_event(data->input_keys, EV_MSC, MSC_SCAN, data->pressed_keys[j]);
if (data->pressed_keys[j] < PICOLCD_KEYS)
key_code = data->keycode[data->pressed_keys[j]];
else
key_code = KEY_UNKNOWN;
if (key_code != KEY_UNKNOWN) {
dbg_hid(PICOLCD_NAME " got key release for %u:%d",
data->pressed_keys[j], key_code);
input_report_key(data->input_keys, key_code, 0);
}
input_sync(data->input_keys);
data->pressed_keys[j] = 0;
key_still_down:
continue;
}
return 1;
}
static int picolcd_raw_cir(struct picolcd_data *data,
struct hid_report *report, u8 *raw_data, int size)
{
/* Need understanding of CIR data format to implement ... */
return 1;
}
static int picolcd_check_version(struct hid_device *hdev)
{
struct picolcd_data *data = hid_get_drvdata(hdev);
struct picolcd_pending *verinfo;
int ret = 0;
if (!data)
return -ENODEV;
verinfo = picolcd_send_and_wait(hdev, REPORT_VERSION, NULL, 0);
if (!verinfo) {
dev_err(&hdev->dev, "no version response from PicoLCD");
return -ENODEV;
}
if (verinfo->raw_size == 2) {
data->version[0] = verinfo->raw_data[1];
data->version[1] = verinfo->raw_data[0];
if (data->status & PICOLCD_BOOTLOADER) {
dev_info(&hdev->dev, "PicoLCD, bootloader version %d.%d\n",
verinfo->raw_data[1], verinfo->raw_data[0]);
} else {
dev_info(&hdev->dev, "PicoLCD, firmware version %d.%d\n",
verinfo->raw_data[1], verinfo->raw_data[0]);
}
} else {
dev_err(&hdev->dev, "confused, got unexpected version response from PicoLCD\n");
ret = -EINVAL;
}
kfree(verinfo);
return ret;
}
/*
* Reset our device and wait for answer to VERSION request
*/
static int picolcd_reset(struct hid_device *hdev)
{
struct picolcd_data *data = hid_get_drvdata(hdev);
struct hid_report *report = picolcd_out_report(REPORT_RESET, hdev);
unsigned long flags;
int error;
if (!data || !report || report->maxfield != 1)
return -ENODEV;
spin_lock_irqsave(&data->lock, flags);
if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER)
data->status |= PICOLCD_BOOTLOADER;
/* perform the reset */
hid_set_field(report->field[0], 0, 1);
usbhid_submit_report(hdev, report, USB_DIR_OUT);
spin_unlock_irqrestore(&data->lock, flags);
error = picolcd_check_version(hdev);
if (error)
return error;
picolcd_resume_lcd(data);
picolcd_resume_backlight(data);
#ifdef CONFIG_HID_PICOLCD_FB
if (data->fb_info)
schedule_delayed_work(&data->fb_info->deferred_work, 0);
#endif /* CONFIG_HID_PICOLCD_FB */
picolcd_leds_set(data);
return 0;
}
/*
* The "operation_mode" sysfs attribute
*/
static ssize_t picolcd_operation_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct picolcd_data *data = dev_get_drvdata(dev);
if (data->status & PICOLCD_BOOTLOADER)
return snprintf(buf, PAGE_SIZE, "[bootloader] lcd\n");
else
return snprintf(buf, PAGE_SIZE, "bootloader [lcd]\n");
}
static ssize_t picolcd_operation_mode_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct picolcd_data *data = dev_get_drvdata(dev);
struct hid_report *report = NULL;
size_t cnt = count;
int timeout = data->opmode_delay;
unsigned long flags;
if (cnt >= 3 && strncmp("lcd", buf, 3) == 0) {
if (data->status & PICOLCD_BOOTLOADER)
report = picolcd_out_report(REPORT_EXIT_FLASHER, data->hdev);
buf += 3;
cnt -= 3;
} else if (cnt >= 10 && strncmp("bootloader", buf, 10) == 0) {
if (!(data->status & PICOLCD_BOOTLOADER))
report = picolcd_out_report(REPORT_EXIT_KEYBOARD, data->hdev);
buf += 10;
cnt -= 10;
}
if (!report)
return -EINVAL;
while (cnt > 0 && (buf[cnt-1] == '\n' || buf[cnt-1] == '\r'))
cnt--;
if (cnt != 0)
return -EINVAL;
spin_lock_irqsave(&data->lock, flags);
hid_set_field(report->field[0], 0, timeout & 0xff);
hid_set_field(report->field[0], 1, (timeout >> 8) & 0xff);
usbhid_submit_report(data->hdev, report, USB_DIR_OUT);
spin_unlock_irqrestore(&data->lock, flags);
return count;
}
static DEVICE_ATTR(operation_mode, 0644, picolcd_operation_mode_show,
picolcd_operation_mode_store);
/*
* The "operation_mode_delay" sysfs attribute
*/
static ssize_t picolcd_operation_mode_delay_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct picolcd_data *data = dev_get_drvdata(dev);
return snprintf(buf, PAGE_SIZE, "%hu\n", data->opmode_delay);
}
static ssize_t picolcd_operation_mode_delay_store(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
struct picolcd_data *data = dev_get_drvdata(dev);
unsigned u;
if (sscanf(buf, "%u", &u) != 1)
return -EINVAL;
if (u > 30000)
return -EINVAL;
else
data->opmode_delay = u;
return count;
}
static DEVICE_ATTR(operation_mode_delay, 0644, picolcd_operation_mode_delay_show,
picolcd_operation_mode_delay_store);
#ifdef CONFIG_DEBUG_FS
/*
* The "reset" file
*/
static int picolcd_debug_reset_show(struct seq_file *f, void *p)
{
if (picolcd_fbinfo((struct picolcd_data *)f->private))
seq_printf(f, "all fb\n");
else
seq_printf(f, "all\n");
return 0;
}
static int picolcd_debug_reset_open(struct inode *inode, struct file *f)
{
return single_open(f, picolcd_debug_reset_show, inode->i_private);
}
static ssize_t picolcd_debug_reset_write(struct file *f, const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct picolcd_data *data = ((struct seq_file *)f->private_data)->private;
char buf[32];
size_t cnt = min(count, sizeof(buf)-1);
if (copy_from_user(buf, user_buf, cnt))
return -EFAULT;
while (cnt > 0 && (buf[cnt-1] == ' ' || buf[cnt-1] == '\n'))
cnt--;
buf[cnt] = '\0';
if (strcmp(buf, "all") == 0) {
picolcd_reset(data->hdev);
picolcd_fb_reset(data, 1);
} else if (strcmp(buf, "fb") == 0) {
picolcd_fb_reset(data, 1);
} else {
return -EINVAL;
}
return count;
}
static const struct file_operations picolcd_debug_reset_fops = {
.owner = THIS_MODULE,
.open = picolcd_debug_reset_open,
.read = seq_read,
.llseek = seq_lseek,
.write = picolcd_debug_reset_write,
.release = single_release,
};
/*
* The "eeprom" file
*/
static int picolcd_debug_eeprom_open(struct inode *i, struct file *f)
{
f->private_data = i->i_private;
return 0;
}
static ssize_t picolcd_debug_eeprom_read(struct file *f, char __user *u,
size_t s, loff_t *off)
{
struct picolcd_data *data = f->private_data;
struct picolcd_pending *resp;
u8 raw_data[3];
ssize_t ret = -EIO;
if (s == 0)
return -EINVAL;
if (*off > 0x0ff)
return 0;
/* prepare buffer with info about what we want to read (addr & len) */
raw_data[0] = *off & 0xff;
raw_data[1] = (*off >> 8) && 0xff;
raw_data[2] = s < 20 ? s : 20;
if (*off + raw_data[2] > 0xff)
raw_data[2] = 0x100 - *off;
resp = picolcd_send_and_wait(data->hdev, REPORT_EE_READ, raw_data,
sizeof(raw_data));
if (!resp)
return -EIO;
if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) {
/* successful read :) */
ret = resp->raw_data[2];
if (ret > s)
ret = s;
if (copy_to_user(u, resp->raw_data+3, ret))
ret = -EFAULT;
else
*off += ret;
} /* anything else is some kind of IO error */
kfree(resp);
return ret;
}
static ssize_t picolcd_debug_eeprom_write(struct file *f, const char __user *u,
size_t s, loff_t *off)
{
struct picolcd_data *data = f->private_data;
struct picolcd_pending *resp;
ssize_t ret = -EIO;
u8 raw_data[23];
if (s == 0)
return -EINVAL;
if (*off > 0x0ff)
return -ENOSPC;
memset(raw_data, 0, sizeof(raw_data));
raw_data[0] = *off & 0xff;
raw_data[1] = (*off >> 8) && 0xff;
raw_data[2] = s < 20 ? s : 20;
if (*off + raw_data[2] > 0xff)
raw_data[2] = 0x100 - *off;
if (copy_from_user(raw_data+3, u, raw_data[2]))
return -EFAULT;
resp = picolcd_send_and_wait(data->hdev, REPORT_EE_WRITE, raw_data,
sizeof(raw_data));
if (!resp)
return -EIO;
if (resp->in_report && resp->in_report->id == REPORT_EE_DATA) {
/* check if written data matches */
if (memcmp(raw_data, resp->raw_data, 3+raw_data[2]) == 0) {
*off += raw_data[2];
ret = raw_data[2];
}
}
kfree(resp);
return ret;
}
/*
* Notes:
* - read/write happens in chunks of at most 20 bytes, it's up to userspace
* to loop in order to get more data.
* - on write errors on otherwise correct write request the bytes
* that should have been written are in undefined state.
*/
static const struct file_operations picolcd_debug_eeprom_fops = {
.owner = THIS_MODULE,
.open = picolcd_debug_eeprom_open,
.read = picolcd_debug_eeprom_read,
.write = picolcd_debug_eeprom_write,
.llseek = generic_file_llseek,
};
/*
* The "flash" file
*/
static int picolcd_debug_flash_open(struct inode *i, struct file *f)
{
f->private_data = i->i_private;
return 0;
}
/* record a flash address to buf (bounds check to be done by caller) */
static int _picolcd_flash_setaddr(struct picolcd_data *data, u8 *buf, long off)
{
buf[0] = off & 0xff;
buf[1] = (off >> 8) & 0xff;
if (data->addr_sz == 3)
buf[2] = (off >> 16) & 0xff;
return data->addr_sz == 2 ? 2 : 3;
}
/* read a given size of data (bounds check to be done by caller) */
static ssize_t _picolcd_flash_read(struct picolcd_data *data, int report_id,
char __user *u, size_t s, loff_t *off)
{
struct picolcd_pending *resp;
u8 raw_data[4];
ssize_t ret = 0;
int len_off, err = -EIO;
while (s > 0) {
err = -EIO;
len_off = _picolcd_flash_setaddr(data, raw_data, *off);
raw_data[len_off] = s > 32 ? 32 : s;
resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off+1);
if (!resp || !resp->in_report)
goto skip;
if (resp->in_report->id == REPORT_MEMORY ||
resp->in_report->id == REPORT_BL_READ_MEMORY) {
if (memcmp(raw_data, resp->raw_data, len_off+1) != 0)
goto skip;
if (copy_to_user(u+ret, resp->raw_data+len_off+1, raw_data[len_off])) {
err = -EFAULT;
goto skip;
}
*off += raw_data[len_off];
s -= raw_data[len_off];
ret += raw_data[len_off];
err = 0;
}
skip:
kfree(resp);
if (err)
return ret > 0 ? ret : err;
}
return ret;
}
static ssize_t picolcd_debug_flash_read(struct file *f, char __user *u,
size_t s, loff_t *off)
{
struct picolcd_data *data = f->private_data;
if (s == 0)
return -EINVAL;
if (*off > 0x05fff)
return 0;
if (*off + s > 0x05fff)
s = 0x06000 - *off;
if (data->status & PICOLCD_BOOTLOADER)
return _picolcd_flash_read(data, REPORT_BL_READ_MEMORY, u, s, off);
else
return _picolcd_flash_read(data, REPORT_READ_MEMORY, u, s, off);
}
/* erase block aligned to 64bytes boundary */
static ssize_t _picolcd_flash_erase64(struct picolcd_data *data, int report_id,
loff_t *off)
{
struct picolcd_pending *resp;
u8 raw_data[3];
int len_off;
ssize_t ret = -EIO;
if (*off & 0x3f)
return -EINVAL;
len_off = _picolcd_flash_setaddr(data, raw_data, *off);
resp = picolcd_send_and_wait(data->hdev, report_id, raw_data, len_off);
if (!resp || !resp->in_report)
goto skip;
if (resp->in_report->id == REPORT_MEMORY ||
resp->in_report->id == REPORT_BL_ERASE_MEMORY) {
if (memcmp(raw_data, resp->raw_data, len_off) != 0)
goto skip;
ret = 0;
}
skip:
kfree(resp);
return ret;
}
/* write a given size of data (bounds check to be done by caller) */
static ssize_t _picolcd_flash_write(struct picolcd_data *data, int report_id,
const char __user *u, size_t s, loff_t *off)
{
struct picolcd_pending *resp;
u8 raw_data[36];
ssize_t ret = 0;
int len_off, err = -EIO;
while (s > 0) {
err = -EIO;
len_off = _picolcd_flash_setaddr(data, raw_data, *off);
raw_data[len_off] = s > 32 ? 32 : s;
if (copy_from_user(raw_data+len_off+1, u, raw_data[len_off])) {
err = -EFAULT;
break;
}
resp = picolcd_send_and_wait(data->hdev, report_id, raw_data,
len_off+1+raw_data[len_off]);
if (!resp || !resp->in_report)
goto skip;
if (resp->in_report->id == REPORT_MEMORY ||
resp->in_report->id == REPORT_BL_WRITE_MEMORY) {
if (memcmp(raw_data, resp->raw_data, len_off+1+raw_data[len_off]) != 0)
goto skip;
*off += raw_data[len_off];
s -= raw_data[len_off];
ret += raw_data[len_off];
err = 0;
}
skip:
kfree(resp);
if (err)
break;
}
return ret > 0 ? ret : err;
}
static ssize_t picolcd_debug_flash_write(struct file *f, const char __user *u,
size_t s, loff_t *off)
{
struct picolcd_data *data = f->private_data;
ssize_t err, ret = 0;
int report_erase, report_write;
if (s == 0)
return -EINVAL;
if (*off > 0x5fff)
return -ENOSPC;
if (s & 0x3f)
return -EINVAL;
if (*off & 0x3f)
return -EINVAL;
if (data->status & PICOLCD_BOOTLOADER) {
report_erase = REPORT_BL_ERASE_MEMORY;
report_write = REPORT_BL_WRITE_MEMORY;
} else {
report_erase = REPORT_ERASE_MEMORY;
report_write = REPORT_WRITE_MEMORY;
}
mutex_lock(&data->mutex_flash);
while (s > 0) {
err = _picolcd_flash_erase64(data, report_erase, off);
if (err)
break;
err = _picolcd_flash_write(data, report_write, u, 64, off);
if (err < 0)
break;
ret += err;
*off += err;
s -= err;
if (err != 64)
break;
}
mutex_unlock(&data->mutex_flash);
return ret > 0 ? ret : err;
}
/*
* Notes:
* - concurrent writing is prevented by mutex and all writes must be
* n*64 bytes and 64-byte aligned, each write being preceeded by an
* ERASE which erases a 64byte block.
* If less than requested was written or an error is returned for an
* otherwise correct write request the next 64-byte block which should
* have been written is in undefined state (mostly: original, erased,
* (half-)written with write error)
* - reading can happend without special restriction
*/
static const struct file_operations picolcd_debug_flash_fops = {
.owner = THIS_MODULE,
.open = picolcd_debug_flash_open,
.read = picolcd_debug_flash_read,
.write = picolcd_debug_flash_write,
.llseek = generic_file_llseek,
};
/*
* Helper code for HID report level dumping/debugging
*/
static const char *error_codes[] = {
"success", "parameter missing", "data_missing", "block readonly",
"block not erasable", "block too big", "section overflow",
"invalid command length", "invalid data length",
};
static void dump_buff_as_hex(char *dst, size_t dst_sz, const u8 *data,
const size_t data_len)
{
int i, j;
for (i = j = 0; i < data_len && j + 3 < dst_sz; i++) {
dst[j++] = hex_asc[(data[i] >> 4) & 0x0f];
dst[j++] = hex_asc[data[i] & 0x0f];
dst[j++] = ' ';
}
if (j < dst_sz) {
dst[j--] = '\0';
dst[j] = '\n';
} else
dst[j] = '\0';
}
static void picolcd_debug_out_report(struct picolcd_data *data,
struct hid_device *hdev, struct hid_report *report)
{
u8 raw_data[70];
int raw_size = (report->size >> 3) + 1;
char *buff;
#define BUFF_SZ 256
/* Avoid unnecessary overhead if debugfs is disabled */
if (!hdev->debug_events)
return;
buff = kmalloc(BUFF_SZ, GFP_ATOMIC);
if (!buff)
return;
snprintf(buff, BUFF_SZ, "\nout report %d (size %d) = ",
report->id, raw_size);
hid_debug_event(hdev, buff);
if (raw_size + 5 > sizeof(raw_data)) {
hid_debug_event(hdev, " TOO BIG\n");
return;
} else {
raw_data[0] = report->id;
hid_output_report(report, raw_data);
dump_buff_as_hex(buff, BUFF_SZ, raw_data, raw_size);
hid_debug_event(hdev, buff);
}
switch (report->id) {
case REPORT_LED_STATE:
/* 1 data byte with GPO state */
snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
"REPORT_LED_STATE", report->id, raw_size-1);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tGPO state: 0x%02x\n", raw_data[1]);
hid_debug_event(hdev, buff);
break;
case REPORT_BRIGHTNESS:
/* 1 data byte with brightness */
snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
"REPORT_BRIGHTNESS", report->id, raw_size-1);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tBrightness: 0x%02x\n", raw_data[1]);
hid_debug_event(hdev, buff);
break;
case REPORT_CONTRAST:
/* 1 data byte with contrast */
snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
"REPORT_CONTRAST", report->id, raw_size-1);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tContrast: 0x%02x\n", raw_data[1]);
hid_debug_event(hdev, buff);
break;
case REPORT_RESET:
/* 2 data bytes with reset duration in ms */
snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
"REPORT_RESET", report->id, raw_size-1);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tDuration: 0x%02x%02x (%dms)\n",
raw_data[2], raw_data[1], raw_data[2] << 8 | raw_data[1]);
hid_debug_event(hdev, buff);
break;
case REPORT_LCD_CMD:
/* 63 data bytes with LCD commands */
snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
"REPORT_LCD_CMD", report->id, raw_size-1);
hid_debug_event(hdev, buff);
/* TODO: format decoding */
break;
case REPORT_LCD_DATA:
/* 63 data bytes with LCD data */
snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
"REPORT_LCD_CMD", report->id, raw_size-1);
/* TODO: format decoding */
hid_debug_event(hdev, buff);
break;
case REPORT_LCD_CMD_DATA:
/* 63 data bytes with LCD commands and data */
snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
"REPORT_LCD_CMD", report->id, raw_size-1);
/* TODO: format decoding */
hid_debug_event(hdev, buff);
break;
case REPORT_EE_READ:
/* 3 data bytes with read area description */
snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
"REPORT_EE_READ", report->id, raw_size-1);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
raw_data[2], raw_data[1]);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
hid_debug_event(hdev, buff);
break;
case REPORT_EE_WRITE:
/* 3+1..20 data bytes with write area description */
snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
"REPORT_EE_WRITE", report->id, raw_size-1);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
raw_data[2], raw_data[1]);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
hid_debug_event(hdev, buff);
if (raw_data[3] == 0) {
snprintf(buff, BUFF_SZ, "\tNo data\n");
} else if (raw_data[3] + 4 <= raw_size) {
snprintf(buff, BUFF_SZ, "\tData: ");
hid_debug_event(hdev, buff);
dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]);
} else {
snprintf(buff, BUFF_SZ, "\tData overflowed\n");
}
hid_debug_event(hdev, buff);
break;
case REPORT_ERASE_MEMORY:
case REPORT_BL_ERASE_MEMORY:
/* 3 data bytes with pointer inside erase block */
snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
"REPORT_ERASE_MEMORY", report->id, raw_size-1);
hid_debug_event(hdev, buff);
switch (data->addr_sz) {
case 2:
snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x\n",
raw_data[2], raw_data[1]);
break;
case 3:
snprintf(buff, BUFF_SZ, "\tAddress inside 64 byte block: 0x%02x%02x%02x\n",
raw_data[3], raw_data[2], raw_data[1]);
break;
default:
snprintf(buff, BUFF_SZ, "\tNot supported\n");
}
hid_debug_event(hdev, buff);
break;
case REPORT_READ_MEMORY:
case REPORT_BL_READ_MEMORY:
/* 4 data bytes with read area description */
snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
"REPORT_READ_MEMORY", report->id, raw_size-1);
hid_debug_event(hdev, buff);
switch (data->addr_sz) {
case 2:
snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
raw_data[2], raw_data[1]);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
break;
case 3:
snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n",
raw_data[3], raw_data[2], raw_data[1]);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]);
break;
default:
snprintf(buff, BUFF_SZ, "\tNot supported\n");
}
hid_debug_event(hdev, buff);
break;
case REPORT_WRITE_MEMORY:
case REPORT_BL_WRITE_MEMORY:
/* 4+1..32 data bytes with write adrea description */
snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
"REPORT_WRITE_MEMORY", report->id, raw_size-1);
hid_debug_event(hdev, buff);
switch (data->addr_sz) {
case 2:
snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
raw_data[2], raw_data[1]);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
hid_debug_event(hdev, buff);
if (raw_data[3] == 0) {
snprintf(buff, BUFF_SZ, "\tNo data\n");
} else if (raw_data[3] + 4 <= raw_size) {
snprintf(buff, BUFF_SZ, "\tData: ");
hid_debug_event(hdev, buff);
dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]);
} else {
snprintf(buff, BUFF_SZ, "\tData overflowed\n");
}
break;
case 3:
snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n",
raw_data[3], raw_data[2], raw_data[1]);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]);
hid_debug_event(hdev, buff);
if (raw_data[4] == 0) {
snprintf(buff, BUFF_SZ, "\tNo data\n");
} else if (raw_data[4] + 5 <= raw_size) {
snprintf(buff, BUFF_SZ, "\tData: ");
hid_debug_event(hdev, buff);
dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]);
} else {
snprintf(buff, BUFF_SZ, "\tData overflowed\n");
}
break;
default:
snprintf(buff, BUFF_SZ, "\tNot supported\n");
}
hid_debug_event(hdev, buff);
break;
case REPORT_SPLASH_RESTART:
/* TODO */
break;
case REPORT_EXIT_KEYBOARD:
snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
"REPORT_EXIT_KEYBOARD", report->id, raw_size-1);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n",
raw_data[1] | (raw_data[2] << 8),
raw_data[2], raw_data[1]);
hid_debug_event(hdev, buff);
break;
case REPORT_VERSION:
snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
"REPORT_VERSION", report->id, raw_size-1);
hid_debug_event(hdev, buff);
break;
case REPORT_DEVID:
snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
"REPORT_DEVID", report->id, raw_size-1);
hid_debug_event(hdev, buff);
break;
case REPORT_SPLASH_SIZE:
snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
"REPORT_SPLASH_SIZE", report->id, raw_size-1);
hid_debug_event(hdev, buff);
break;
case REPORT_HOOK_VERSION:
snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
"REPORT_HOOK_VERSION", report->id, raw_size-1);
hid_debug_event(hdev, buff);
break;
case REPORT_EXIT_FLASHER:
snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
"REPORT_VERSION", report->id, raw_size-1);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tRestart delay: %dms (0x%02x%02x)\n",
raw_data[1] | (raw_data[2] << 8),
raw_data[2], raw_data[1]);
hid_debug_event(hdev, buff);
break;
default:
snprintf(buff, BUFF_SZ, "out report %s (%d, size=%d)\n",
"<unknown>", report->id, raw_size-1);
hid_debug_event(hdev, buff);
break;
}
wake_up_interruptible(&hdev->debug_wait);
kfree(buff);
}
static void picolcd_debug_raw_event(struct picolcd_data *data,
struct hid_device *hdev, struct hid_report *report,
u8 *raw_data, int size)
{
char *buff;
#define BUFF_SZ 256
/* Avoid unnecessary overhead if debugfs is disabled */
if (!hdev->debug_events)
return;
buff = kmalloc(BUFF_SZ, GFP_ATOMIC);
if (!buff)
return;
switch (report->id) {
case REPORT_ERROR_CODE:
/* 2 data bytes with affected report and error code */
snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
"REPORT_ERROR_CODE", report->id, size-1);
hid_debug_event(hdev, buff);
if (raw_data[2] < ARRAY_SIZE(error_codes))
snprintf(buff, BUFF_SZ, "\tError code 0x%02x (%s) in reply to report 0x%02x\n",
raw_data[2], error_codes[raw_data[2]], raw_data[1]);
else
snprintf(buff, BUFF_SZ, "\tError code 0x%02x in reply to report 0x%02x\n",
raw_data[2], raw_data[1]);
hid_debug_event(hdev, buff);
break;
case REPORT_KEY_STATE:
/* 2 data bytes with key state */
snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
"REPORT_KEY_STATE", report->id, size-1);
hid_debug_event(hdev, buff);
if (raw_data[1] == 0)
snprintf(buff, BUFF_SZ, "\tNo key pressed\n");
else if (raw_data[2] == 0)
snprintf(buff, BUFF_SZ, "\tOne key pressed: 0x%02x (%d)\n",
raw_data[1], raw_data[1]);
else
snprintf(buff, BUFF_SZ, "\tTwo keys pressed: 0x%02x (%d), 0x%02x (%d)\n",
raw_data[1], raw_data[1], raw_data[2], raw_data[2]);
hid_debug_event(hdev, buff);
break;
case REPORT_IR_DATA:
/* Up to 20 byes of IR scancode data */
snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
"REPORT_IR_DATA", report->id, size-1);
hid_debug_event(hdev, buff);
if (raw_data[1] == 0) {
snprintf(buff, BUFF_SZ, "\tUnexpectedly 0 data length\n");
hid_debug_event(hdev, buff);
} else if (raw_data[1] + 1 <= size) {
snprintf(buff, BUFF_SZ, "\tData length: %d\n\tIR Data: ",
raw_data[1]-1);
hid_debug_event(hdev, buff);
dump_buff_as_hex(buff, BUFF_SZ, raw_data+2, raw_data[1]-1);
hid_debug_event(hdev, buff);
} else {
snprintf(buff, BUFF_SZ, "\tOverflowing data length: %d\n",
raw_data[1]-1);
hid_debug_event(hdev, buff);
}
break;
case REPORT_EE_DATA:
/* Data buffer in response to REPORT_EE_READ or REPORT_EE_WRITE */
snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
"REPORT_EE_DATA", report->id, size-1);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
raw_data[2], raw_data[1]);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
hid_debug_event(hdev, buff);
if (raw_data[3] == 0) {
snprintf(buff, BUFF_SZ, "\tNo data\n");
hid_debug_event(hdev, buff);
} else if (raw_data[3] + 4 <= size) {
snprintf(buff, BUFF_SZ, "\tData: ");
hid_debug_event(hdev, buff);
dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]);
hid_debug_event(hdev, buff);
} else {
snprintf(buff, BUFF_SZ, "\tData overflowed\n");
hid_debug_event(hdev, buff);
}
break;
case REPORT_MEMORY:
/* Data buffer in response to REPORT_READ_MEMORY or REPORT_WRTIE_MEMORY */
snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
"REPORT_MEMORY", report->id, size-1);
hid_debug_event(hdev, buff);
switch (data->addr_sz) {
case 2:
snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x\n",
raw_data[2], raw_data[1]);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[3]);
hid_debug_event(hdev, buff);
if (raw_data[3] == 0) {
snprintf(buff, BUFF_SZ, "\tNo data\n");
} else if (raw_data[3] + 4 <= size) {
snprintf(buff, BUFF_SZ, "\tData: ");
hid_debug_event(hdev, buff);
dump_buff_as_hex(buff, BUFF_SZ, raw_data+4, raw_data[3]);
} else {
snprintf(buff, BUFF_SZ, "\tData overflowed\n");
}
break;
case 3:
snprintf(buff, BUFF_SZ, "\tData address: 0x%02x%02x%02x\n",
raw_data[3], raw_data[2], raw_data[1]);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tData length: %d\n", raw_data[4]);
hid_debug_event(hdev, buff);
if (raw_data[4] == 0) {
snprintf(buff, BUFF_SZ, "\tNo data\n");
} else if (raw_data[4] + 5 <= size) {
snprintf(buff, BUFF_SZ, "\tData: ");
hid_debug_event(hdev, buff);
dump_buff_as_hex(buff, BUFF_SZ, raw_data+5, raw_data[4]);
} else {
snprintf(buff, BUFF_SZ, "\tData overflowed\n");
}
break;
default:
snprintf(buff, BUFF_SZ, "\tNot supported\n");
}
hid_debug_event(hdev, buff);
break;
case REPORT_VERSION:
snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
"REPORT_VERSION", report->id, size-1);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n",
raw_data[2], raw_data[1]);
hid_debug_event(hdev, buff);
break;
case REPORT_BL_ERASE_MEMORY:
snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
"REPORT_BL_ERASE_MEMORY", report->id, size-1);
hid_debug_event(hdev, buff);
/* TODO */
break;
case REPORT_BL_READ_MEMORY:
snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
"REPORT_BL_READ_MEMORY", report->id, size-1);
hid_debug_event(hdev, buff);
/* TODO */
break;
case REPORT_BL_WRITE_MEMORY:
snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
"REPORT_BL_WRITE_MEMORY", report->id, size-1);
hid_debug_event(hdev, buff);
/* TODO */
break;
case REPORT_DEVID:
snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
"REPORT_DEVID", report->id, size-1);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tSerial: 0x%02x%02x%02x%02x\n",
raw_data[1], raw_data[2], raw_data[3], raw_data[4]);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tType: 0x%02x\n",
raw_data[5]);
hid_debug_event(hdev, buff);
break;
case REPORT_SPLASH_SIZE:
snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
"REPORT_SPLASH_SIZE", report->id, size-1);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tTotal splash space: %d\n",
(raw_data[2] << 8) | raw_data[1]);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tUsed splash space: %d\n",
(raw_data[4] << 8) | raw_data[3]);
hid_debug_event(hdev, buff);
break;
case REPORT_HOOK_VERSION:
snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
"REPORT_HOOK_VERSION", report->id, size-1);
hid_debug_event(hdev, buff);
snprintf(buff, BUFF_SZ, "\tFirmware version: %d.%d\n",
raw_data[1], raw_data[2]);
hid_debug_event(hdev, buff);
break;
default:
snprintf(buff, BUFF_SZ, "report %s (%d, size=%d)\n",
"<unknown>", report->id, size-1);
hid_debug_event(hdev, buff);
break;
}
wake_up_interruptible(&hdev->debug_wait);
kfree(buff);
}
static void picolcd_init_devfs(struct picolcd_data *data,
struct hid_report *eeprom_r, struct hid_report *eeprom_w,
struct hid_report *flash_r, struct hid_report *flash_w,
struct hid_report *reset)
{
struct hid_device *hdev = data->hdev;
mutex_init(&data->mutex_flash);
/* reset */
if (reset)
data->debug_reset = debugfs_create_file("reset", 0600,
hdev->debug_dir, data, &picolcd_debug_reset_fops);
/* eeprom */
if (eeprom_r || eeprom_w)
data->debug_eeprom = debugfs_create_file("eeprom",
(eeprom_w ? S_IWUSR : 0) | (eeprom_r ? S_IRUSR : 0),
hdev->debug_dir, data, &picolcd_debug_eeprom_fops);
/* flash */
if (flash_r && flash_r->maxfield == 1 && flash_r->field[0]->report_size == 8)
data->addr_sz = flash_r->field[0]->report_count - 1;
else
data->addr_sz = -1;
if (data->addr_sz == 2 || data->addr_sz == 3) {
data->debug_flash = debugfs_create_file("flash",
(flash_w ? S_IWUSR : 0) | (flash_r ? S_IRUSR : 0),
hdev->debug_dir, data, &picolcd_debug_flash_fops);
} else if (flash_r || flash_w)
dev_warn(&hdev->dev, "Unexpected FLASH access reports, "
"please submit rdesc for review\n");
}
static void picolcd_exit_devfs(struct picolcd_data *data)
{
struct dentry *dent;
dent = data->debug_reset;
data->debug_reset = NULL;
if (dent)
debugfs_remove(dent);
dent = data->debug_eeprom;
data->debug_eeprom = NULL;
if (dent)
debugfs_remove(dent);
dent = data->debug_flash;
data->debug_flash = NULL;
if (dent)
debugfs_remove(dent);
mutex_destroy(&data->mutex_flash);
}
#else
static inline void picolcd_debug_raw_event(struct picolcd_data *data,
struct hid_device *hdev, struct hid_report *report,
u8 *raw_data, int size)
{
}
static inline void picolcd_init_devfs(struct picolcd_data *data,
struct hid_report *eeprom_r, struct hid_report *eeprom_w,
struct hid_report *flash_r, struct hid_report *flash_w,
struct hid_report *reset)
{
}
static inline void picolcd_exit_devfs(struct picolcd_data *data)
{
}
#endif /* CONFIG_DEBUG_FS */
/*
* Handle raw report as sent by device
*/
static int picolcd_raw_event(struct hid_device *hdev,
struct hid_report *report, u8 *raw_data, int size)
{
struct picolcd_data *data = hid_get_drvdata(hdev);
unsigned long flags;
int ret = 0;
if (!data)
return 1;
if (report->id == REPORT_KEY_STATE) {
if (data->input_keys)
ret = picolcd_raw_keypad(data, report, raw_data+1, size-1);
} else if (report->id == REPORT_IR_DATA) {
if (data->input_cir)
ret = picolcd_raw_cir(data, report, raw_data+1, size-1);
} else {
spin_lock_irqsave(&data->lock, flags);
/*
* We let the caller of picolcd_send_and_wait() check if the
* report we got is one of the expected ones or not.
*/
if (data->pending) {
memcpy(data->pending->raw_data, raw_data+1, size-1);
data->pending->raw_size = size-1;
data->pending->in_report = report;
complete(&data->pending->ready);
}
spin_unlock_irqrestore(&data->lock, flags);
}
picolcd_debug_raw_event(data, hdev, report, raw_data, size);
return 1;
}
#ifdef CONFIG_PM
static int picolcd_suspend(struct hid_device *hdev, pm_message_t message)
{
if (message.event & PM_EVENT_AUTO)
return 0;
picolcd_suspend_backlight(hid_get_drvdata(hdev));
dbg_hid(PICOLCD_NAME " device ready for suspend\n");
return 0;
}
static int picolcd_resume(struct hid_device *hdev)
{
int ret;
ret = picolcd_resume_backlight(hid_get_drvdata(hdev));
if (ret)
dbg_hid(PICOLCD_NAME " restoring backlight failed: %d\n", ret);
return 0;
}
static int picolcd_reset_resume(struct hid_device *hdev)
{
int ret;
ret = picolcd_reset(hdev);
if (ret)
dbg_hid(PICOLCD_NAME " resetting our device failed: %d\n", ret);
ret = picolcd_fb_reset(hid_get_drvdata(hdev), 0);
if (ret)
dbg_hid(PICOLCD_NAME " restoring framebuffer content failed: %d\n", ret);
ret = picolcd_resume_lcd(hid_get_drvdata(hdev));
if (ret)
dbg_hid(PICOLCD_NAME " restoring lcd failed: %d\n", ret);
ret = picolcd_resume_backlight(hid_get_drvdata(hdev));
if (ret)
dbg_hid(PICOLCD_NAME " restoring backlight failed: %d\n", ret);
picolcd_leds_set(hid_get_drvdata(hdev));
return 0;
}
#endif
/* initialize keypad input device */
static int picolcd_init_keys(struct picolcd_data *data,
struct hid_report *report)
{
struct hid_device *hdev = data->hdev;
struct input_dev *idev;
int error, i;
if (!report)
return -ENODEV;
if (report->maxfield != 1 || report->field[0]->report_count != 2 ||
report->field[0]->report_size != 8) {
dev_err(&hdev->dev, "unsupported KEY_STATE report");
return -EINVAL;
}
idev = input_allocate_device();
if (idev == NULL) {
dev_err(&hdev->dev, "failed to allocate input device");
return -ENOMEM;
}
input_set_drvdata(idev, hdev);
memcpy(data->keycode, def_keymap, sizeof(def_keymap));
idev->name = hdev->name;
idev->phys = hdev->phys;
idev->uniq = hdev->uniq;
idev->id.bustype = hdev->bus;
idev->id.vendor = hdev->vendor;
idev->id.product = hdev->product;
idev->id.version = hdev->version;
idev->dev.parent = hdev->dev.parent;
idev->keycode = &data->keycode;
idev->keycodemax = PICOLCD_KEYS;
idev->keycodesize = sizeof(data->keycode[0]);
input_set_capability(idev, EV_MSC, MSC_SCAN);
set_bit(EV_REP, idev->evbit);
for (i = 0; i < PICOLCD_KEYS; i++)
input_set_capability(idev, EV_KEY, data->keycode[i]);
error = input_register_device(idev);
if (error) {
dev_err(&hdev->dev, "error registering the input device");
input_free_device(idev);
return error;
}
data->input_keys = idev;
return 0;
}
static void picolcd_exit_keys(struct picolcd_data *data)
{
struct input_dev *idev = data->input_keys;
data->input_keys = NULL;
if (idev)
input_unregister_device(idev);
}
/* initialize CIR input device */
static inline int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report)
{
/* support not implemented yet */
return 0;
}
static inline void picolcd_exit_cir(struct picolcd_data *data)
{
}
static int picolcd_probe_lcd(struct hid_device *hdev, struct picolcd_data *data)
{
int error;
error = picolcd_check_version(hdev);
if (error)
return error;
if (data->version[0] != 0 && data->version[1] != 3)
dev_info(&hdev->dev, "Device with untested firmware revision, "
"please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n",
dev_name(&hdev->dev));
/* Setup keypad input device */
error = picolcd_init_keys(data, picolcd_in_report(REPORT_KEY_STATE, hdev));
if (error)
goto err;
/* Setup CIR input device */
error = picolcd_init_cir(data, picolcd_in_report(REPORT_IR_DATA, hdev));
if (error)
goto err;
/* Set up the framebuffer device */
error = picolcd_init_framebuffer(data);
if (error)
goto err;
/* Setup lcd class device */
error = picolcd_init_lcd(data, picolcd_out_report(REPORT_CONTRAST, hdev));
if (error)
goto err;
/* Setup backlight class device */
error = picolcd_init_backlight(data, picolcd_out_report(REPORT_BRIGHTNESS, hdev));
if (error)
goto err;
/* Setup the LED class devices */
error = picolcd_init_leds(data, picolcd_out_report(REPORT_LED_STATE, hdev));
if (error)
goto err;
picolcd_init_devfs(data, picolcd_out_report(REPORT_EE_READ, hdev),
picolcd_out_report(REPORT_EE_WRITE, hdev),
picolcd_out_report(REPORT_READ_MEMORY, hdev),
picolcd_out_report(REPORT_WRITE_MEMORY, hdev),
picolcd_out_report(REPORT_RESET, hdev));
return 0;
err:
picolcd_exit_leds(data);
picolcd_exit_backlight(data);
picolcd_exit_lcd(data);
picolcd_exit_framebuffer(data);
picolcd_exit_cir(data);
picolcd_exit_keys(data);
return error;
}
static int picolcd_probe_bootloader(struct hid_device *hdev, struct picolcd_data *data)
{
int error;
error = picolcd_check_version(hdev);
if (error)
return error;
if (data->version[0] != 1 && data->version[1] != 0)
dev_info(&hdev->dev, "Device with untested bootloader revision, "
"please submit /sys/kernel/debug/hid/%s/rdesc for this device.\n",
dev_name(&hdev->dev));
picolcd_init_devfs(data, NULL, NULL,
picolcd_out_report(REPORT_BL_READ_MEMORY, hdev),
picolcd_out_report(REPORT_BL_WRITE_MEMORY, hdev), NULL);
return 0;
}
static int picolcd_probe(struct hid_device *hdev,
const struct hid_device_id *id)
{
struct picolcd_data *data;
int error = -ENOMEM;
dbg_hid(PICOLCD_NAME " hardware probe...\n");
/*
* Let's allocate the picolcd data structure, set some reasonable
* defaults, and associate it with the device
*/
data = kzalloc(sizeof(struct picolcd_data), GFP_KERNEL);
if (data == NULL) {
dev_err(&hdev->dev, "can't allocate space for Minibox PicoLCD device data\n");
error = -ENOMEM;
goto err_no_cleanup;
}
spin_lock_init(&data->lock);
mutex_init(&data->mutex);
data->hdev = hdev;
data->opmode_delay = 5000;
if (hdev->product == USB_DEVICE_ID_PICOLCD_BOOTLOADER)
data->status |= PICOLCD_BOOTLOADER;
hid_set_drvdata(hdev, data);
/* Parse the device reports and start it up */
error = hid_parse(hdev);
if (error) {
dev_err(&hdev->dev, "device report parse failed\n");
goto err_cleanup_data;
}
/* We don't use hidinput but hid_hw_start() fails if nothing is
* claimed. So spoof claimed input. */
hdev->claimed = HID_CLAIMED_INPUT;
error = hid_hw_start(hdev, 0);
hdev->claimed = 0;
if (error) {
dev_err(&hdev->dev, "hardware start failed\n");
goto err_cleanup_data;
}
error = hdev->ll_driver->open(hdev);
if (error) {
dev_err(&hdev->dev, "failed to open input interrupt pipe for key and IR events\n");
goto err_cleanup_hid_hw;
}
error = device_create_file(&hdev->dev, &dev_attr_operation_mode_delay);
if (error) {
dev_err(&hdev->dev, "failed to create sysfs attributes\n");
goto err_cleanup_hid_ll;
}
error = device_create_file(&hdev->dev, &dev_attr_operation_mode);
if (error) {
dev_err(&hdev->dev, "failed to create sysfs attributes\n");
goto err_cleanup_sysfs1;
}
if (data->status & PICOLCD_BOOTLOADER)
error = picolcd_probe_bootloader(hdev, data);
else
error = picolcd_probe_lcd(hdev, data);
if (error)
goto err_cleanup_sysfs2;
dbg_hid(PICOLCD_NAME " activated and initialized\n");
return 0;
err_cleanup_sysfs2:
device_remove_file(&hdev->dev, &dev_attr_operation_mode);
err_cleanup_sysfs1:
device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay);
err_cleanup_hid_ll:
hdev->ll_driver->close(hdev);
err_cleanup_hid_hw:
hid_hw_stop(hdev);
err_cleanup_data:
kfree(data);
err_no_cleanup:
hid_set_drvdata(hdev, NULL);
return error;
}
static void picolcd_remove(struct hid_device *hdev)
{
struct picolcd_data *data = hid_get_drvdata(hdev);
unsigned long flags;
dbg_hid(PICOLCD_NAME " hardware remove...\n");
spin_lock_irqsave(&data->lock, flags);
data->status |= PICOLCD_FAILED;
spin_unlock_irqrestore(&data->lock, flags);
#ifdef CONFIG_HID_PICOLCD_FB
/* short-circuit FB as early as possible in order to
* avoid long delays if we host console.
*/
if (data->fb_info)
data->fb_info->par = NULL;
#endif
picolcd_exit_devfs(data);
device_remove_file(&hdev->dev, &dev_attr_operation_mode);
device_remove_file(&hdev->dev, &dev_attr_operation_mode_delay);
hdev->ll_driver->close(hdev);
hid_hw_stop(hdev);
hid_set_drvdata(hdev, NULL);
/* Shortcut potential pending reply that will never arrive */
spin_lock_irqsave(&data->lock, flags);
if (data->pending)
complete(&data->pending->ready);
spin_unlock_irqrestore(&data->lock, flags);
/* Cleanup LED */
picolcd_exit_leds(data);
/* Clean up the framebuffer */
picolcd_exit_backlight(data);
picolcd_exit_lcd(data);
picolcd_exit_framebuffer(data);
/* Cleanup input */
picolcd_exit_cir(data);
picolcd_exit_keys(data);
mutex_destroy(&data->mutex);
/* Finally, clean up the picolcd data itself */
kfree(data);
}
static const struct hid_device_id picolcd_devices[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROCHIP, USB_DEVICE_ID_PICOLCD_BOOTLOADER) },
{ }
};
MODULE_DEVICE_TABLE(hid, picolcd_devices);
static struct hid_driver picolcd_driver = {
.name = "hid-picolcd",
.id_table = picolcd_devices,
.probe = picolcd_probe,
.remove = picolcd_remove,
.raw_event = picolcd_raw_event,
#ifdef CONFIG_PM
.suspend = picolcd_suspend,
.resume = picolcd_resume,
.reset_resume = picolcd_reset_resume,
#endif
};
static int __init picolcd_init(void)
{
return hid_register_driver(&picolcd_driver);
}
static void __exit picolcd_exit(void)
{
hid_unregister_driver(&picolcd_driver);
#ifdef CONFIG_HID_PICOLCD_FB
flush_scheduled_work();
WARN_ON(fb_pending);
#endif
}
module_init(picolcd_init);
module_exit(picolcd_exit);
MODULE_DESCRIPTION("Minibox graphics PicoLCD Driver");
MODULE_LICENSE("GPL v2");