kernel-ark/include/asm-mips/ddb5xxx/ddb5477.h
David Woodhouse 62c4f0a2d5 Don't include linux/config.h from anywhere else in include/
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2006-04-26 12:56:16 +01:00

346 lines
11 KiB
C

/***********************************************************************
*
* Copyright 2001 MontaVista Software Inc.
* Author: jsun@mvista.com or jsun@junsun.net
*
* include/asm-mips/ddb5xxx/ddb5477.h
* DDB 5477 specific definitions and macros.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
***********************************************************************
*/
#ifndef __ASM_DDB5XXX_DDB5477_H
#define __ASM_DDB5XXX_DDB5477_H
/*
* This contains macros that are specific to DDB5477 or renamed from
* DDB5476.
*/
/*
* renamed PADRs
*/
#define DDB_LCS0 DDB_DCS2
#define DDB_LCS1 DDB_DCS3
#define DDB_LCS2 DDB_DCS4
#define DDB_VRC5477 DDB_INTCS
/*
* New CPU interface registers
*/
#define DDB_INTCTRL0 0x0400 /* Interrupt Control 0 */
#define DDB_INTCTRL1 0x0404 /* Interrupt Control 1 */
#define DDB_INTCTRL2 0x0408 /* Interrupt Control 2 */
#define DDB_INTCTRL3 0x040c /* Interrupt Control 3 */
#define DDB_INT0STAT 0x0420 /* INT0 Status [R] */
#define DDB_INT1STAT 0x0428 /* INT1 Status [R] */
#define DDB_INT2STAT 0x0430 /* INT2 Status [R] */
#define DDB_INT3STAT 0x0438 /* INT3 Status [R] */
#define DDB_INT4STAT 0x0440 /* INT4 Status [R] */
#define DDB_NMISTAT 0x0450 /* NMI Status [R] */
#define DDB_INTCLR32 0x0468 /* Interrupt Clear */
#define DDB_INTPPES0 0x0470 /* PCI0 Interrupt Control */
#define DDB_INTPPES1 0x0478 /* PCI1 Interrupt Control */
#undef DDB_CPUSTAT /* duplicate in Vrc-5477 */
#define DDB_CPUSTAT 0x0480 /* CPU Status [R] */
#define DDB_BUSCTRL 0x0488 /* Internal Bus Control */
/*
* Timer registers
*/
#define DDB_REFCTRL_L DDB_T0CTRL
#define DDB_REFCTRL_H (DDB_T0CTRL+4)
#define DDB_REFCNTR DDB_T0CNTR
#define DDB_SPT0CTRL_L DDB_T1CTRL
#define DDB_SPT0CTRL_H (DDB_T1CTRL+4)
#define DDB_SPT1CTRL_L DDB_T2CTRL
#define DDB_SPT1CTRL_H (DDB_T2CTRL+4)
#define DDB_SPT1CNTR DDB_T1CTRL
#define DDB_WDTCTRL_L DDB_T3CTRL
#define DDB_WDTCTRL_H (DDB_T3CTRL+4)
#define DDB_WDTCNTR DDB_T3CNTR
/*
* DMA registers are moved. We don't care about it for now. TODO.
*/
/*
* BARs for ext PCI (PCI0)
*/
#undef DDB_BARC
#undef DDB_BARB
#define DDB_BARC0 0x0210 /* PCI0 Control */
#define DDB_BARM010 0x0218 /* PCI0 SDRAM bank01 */
#define DDB_BARM230 0x0220 /* PCI0 SDRAM bank23 */
#define DDB_BAR00 0x0240 /* PCI0 LDCS0 */
#define DDB_BAR10 0x0248 /* PCI0 LDCS1 */
#define DDB_BAR20 0x0250 /* PCI0 LDCS2 */
#define DDB_BAR30 0x0258 /* PCI0 LDCS3 */
#define DDB_BAR40 0x0260 /* PCI0 LDCS4 */
#define DDB_BAR50 0x0268 /* PCI0 LDCS5 */
#define DDB_BARB0 0x0280 /* PCI0 BOOT */
#define DDB_BARP00 0x0290 /* PCI0 for IOPCI Window0 */
#define DDB_BARP10 0x0298 /* PCI0 for IOPCI Window1 */
/*
* BARs for IOPIC (PCI1)
*/
#define DDB_BARC1 0x0610 /* PCI1 Control */
#define DDB_BARM011 0x0618 /* PCI1 SDRAM bank01 */
#define DDB_BARM231 0x0620 /* PCI1 SDRAM bank23 */
#define DDB_BAR01 0x0640 /* PCI1 LDCS0 */
#define DDB_BAR11 0x0648 /* PCI1 LDCS1 */
#define DDB_BAR21 0x0650 /* PCI1 LDCS2 */
#define DDB_BAR31 0x0658 /* PCI1 LDCS3 */
#define DDB_BAR41 0x0660 /* PCI1 LDCS4 */
#define DDB_BAR51 0x0668 /* PCI1 LDCS5 */
#define DDB_BARB1 0x0680 /* PCI1 BOOT */
#define DDB_BARP01 0x0690 /* PCI1 for ext PCI Window0 */
#define DDB_BARP11 0x0698 /* PCI1 for ext PCI Window1 */
/*
* Other registers for ext PCI (PCI0)
*/
#define DDB_PCIINIT00 0x02f0 /* PCI0 Initiator 0 */
#define DDB_PCIINIT10 0x02f8 /* PCI0 Initiator 1 */
#define DDB_PCISWP0 0x02b0 /* PCI0 Swap */
#define DDB_PCIERR0 0x02b8 /* PCI0 Error */
#define DDB_PCICTL0_L 0x02e0 /* PCI0 Control-L */
#define DDB_PCICTL0_H 0x02e4 /* PCI0 Control-H */
#define DDB_PCIARB0_L 0x02e8 /* PCI0 Arbitration-L */
#define DDB_PCIARB0_H 0x02ec /* PCI0 Arbitration-H */
/*
* Other registers for IOPCI (PCI1)
*/
#define DDB_IOPCIW0 0x00d0 /* PCI Address Window 0 [R/W] */
#define DDB_IOPCIW1 0x00d8 /* PCI Address Window 1 [R/W] */
#define DDB_PCIINIT01 0x06f0 /* PCI1 Initiator 0 */
#define DDB_PCIINIT11 0x06f8 /* PCI1 Initiator 1 */
#define DDB_PCISWP1 0x06b0 /* PCI1 Swap */
#define DDB_PCIERR1 0x06b8 /* PCI1 Error */
#define DDB_PCICTL1_L 0x06e0 /* PCI1 Control-L */
#define DDB_PCICTL1_H 0x06e4 /* PCI1 Control-H */
#define DDB_PCIARB1_L 0x06e8 /* PCI1 Arbitration-L */
#define DDB_PCIARB1_H 0x06ec /* PCI1 Arbitration-H */
/*
* Local Bus
*/
#define DDB_LCST0 0x0110 /* LB Chip Select Timing 0 */
#define DDB_LCST1 0x0118 /* LB Chip Select Timing 1 */
#undef DDB_LCST2
#define DDB_LCST2 0x0120 /* LB Chip Select Timing 2 */
#undef DDB_LCST3
#undef DDB_LCST4
#undef DDB_LCST5
#undef DDB_LCST6
#undef DDB_LCST7
#undef DDB_LCST8
#define DDB_ERRADR 0x0150 /* Error Address Register */
#define DDB_ERRCS 0x0160
#define DDB_BTM 0x0170 /* Boot Time Mode value */
/*
* MISC registers
*/
#define DDB_GIUFUNSEL 0x4040 /* select dual-func pins */
#define DDB_PIBMISC 0x0750 /* USB buffer enable / power saving */
/*
* Memory map (physical address)
*
* Note most of the following address must be properly aligned by the
* corresponding size. For example, if PCI_IO_SIZE is 16MB, then
* PCI_IO_BASE must be aligned along 16MB boundary.
*/
/* the actual ram size is detected at run-time */
#define DDB_SDRAM_BASE 0x00000000
#define DDB_MAX_SDRAM_SIZE 0x08000000 /* less than 128MB */
#define DDB_PCI0_MEM_BASE 0x08000000
#define DDB_PCI0_MEM_SIZE 0x08000000 /* 128 MB */
#define DDB_PCI1_MEM_BASE 0x10000000
#define DDB_PCI1_MEM_SIZE 0x08000000 /* 128 MB */
#define DDB_PCI0_CONFIG_BASE 0x18000000
#define DDB_PCI0_CONFIG_SIZE 0x01000000 /* 16 MB */
#define DDB_PCI1_CONFIG_BASE 0x19000000
#define DDB_PCI1_CONFIG_SIZE 0x01000000 /* 16 MB */
#define DDB_PCI_IO_BASE 0x1a000000 /* we concatenate two IOs */
#define DDB_PCI0_IO_BASE 0x1a000000
#define DDB_PCI0_IO_SIZE 0x01000000 /* 16 MB */
#define DDB_PCI1_IO_BASE 0x1b000000
#define DDB_PCI1_IO_SIZE 0x01000000 /* 16 MB */
#define DDB_LCS0_BASE 0x1c000000 /* flash memory */
#define DDB_LCS0_SIZE 0x01000000 /* 16 MB */
#define DDB_LCS1_BASE 0x1d000000 /* misc */
#define DDB_LCS1_SIZE 0x01000000 /* 16 MB */
#define DDB_LCS2_BASE 0x1e000000 /* Mezzanine */
#define DDB_LCS2_SIZE 0x01000000 /* 16 MB */
#define DDB_VRC5477_BASE 0x1fa00000 /* VRC5477 control regs */
#define DDB_VRC5477_SIZE 0x00200000 /* 2MB */
#define DDB_BOOTCS_BASE 0x1fc00000 /* Boot ROM / EPROM /Flash */
#define DDB_BOOTCS_SIZE 0x00200000 /* 2 MB - doc says 4MB */
#define DDB_LED DDB_LCS1_BASE + 0x10000
/*
* DDB5477 specific functions
*/
#ifndef __ASSEMBLY__
extern void ddb5477_irq_setup(void);
/* route irq to cpu int pin */
extern void ll_vrc5477_irq_route(int vrc5477_irq, int ip);
/* low-level routine for enabling vrc5477 irq, bypassing high-level */
extern void ll_vrc5477_irq_enable(int vrc5477_irq);
extern void ll_vrc5477_irq_disable(int vrc5477_irq);
#endif /* !__ASSEMBLY__ */
/* PCI intr ack share PCIW0 with PCI IO */
#define DDB_PCI_IACK_BASE DDB_PCI_IO_BASE
/*
* Interrupt mapping
*
* We have three interrupt controllers:
*
* . CPU itself - 8 sources
* . i8259 - 16 sources
* . vrc5477 - 32 sources
*
* They connected as follows:
* all vrc5477 interrupts are routed to cpu IP2 (by software setting)
* all i8359 are routed to INTC in vrc5477 (by hardware connection)
*
* All VRC5477 PCI interrupts are level-triggered (no ack needed).
* All PCI irq but INTC are active low.
*/
/*
* irq number block assignment
*/
#define NUM_CPU_IRQ 8
#define NUM_I8259_IRQ 16
#define NUM_VRC5477_IRQ 32
#define DDB_IRQ_BASE 0
#define I8259_IRQ_BASE DDB_IRQ_BASE
#define VRC5477_IRQ_BASE (I8259_IRQ_BASE + NUM_I8259_IRQ)
#define CPU_IRQ_BASE (VRC5477_IRQ_BASE + NUM_VRC5477_IRQ)
/*
* vrc5477 irq defs
*/
#define VRC5477_IRQ_CPCE (0 + VRC5477_IRQ_BASE) /* cpu parity error */
#define VRC5477_IRQ_CNTD (1 + VRC5477_IRQ_BASE) /* cpu no target */
#define VRC5477_IRQ_I2C (2 + VRC5477_IRQ_BASE) /* I2C */
#define VRC5477_IRQ_DMA (3 + VRC5477_IRQ_BASE) /* DMA */
#define VRC5477_IRQ_UART0 (4 + VRC5477_IRQ_BASE)
#define VRC5477_IRQ_WDOG (5 + VRC5477_IRQ_BASE) /* watchdog timer */
#define VRC5477_IRQ_SPT1 (6 + VRC5477_IRQ_BASE) /* special purpose timer 1 */
#define VRC5477_IRQ_LBRT (7 + VRC5477_IRQ_BASE) /* local bus read timeout */
#define VRC5477_IRQ_INTA (8 + VRC5477_IRQ_BASE) /* PCI INT #A */
#define VRC5477_IRQ_INTB (9 + VRC5477_IRQ_BASE) /* PCI INT #B */
#define VRC5477_IRQ_INTC (10 + VRC5477_IRQ_BASE) /* PCI INT #C */
#define VRC5477_IRQ_INTD (11 + VRC5477_IRQ_BASE) /* PCI INT #D */
#define VRC5477_IRQ_INTE (12 + VRC5477_IRQ_BASE) /* PCI INT #E */
#define VRC5477_IRQ_RESERVED_13 (13 + VRC5477_IRQ_BASE) /* reserved */
#define VRC5477_IRQ_PCIS (14 + VRC5477_IRQ_BASE) /* PCI SERR # */
#define VRC5477_IRQ_PCI (15 + VRC5477_IRQ_BASE) /* PCI internal error */
#define VRC5477_IRQ_IOPCI_INTA (16 + VRC5477_IRQ_BASE) /* USB-H */
#define VRC5477_IRQ_IOPCI_INTB (17 + VRC5477_IRQ_BASE) /* USB-P */
#define VRC5477_IRQ_IOPCI_INTC (18 + VRC5477_IRQ_BASE) /* AC97 */
#define VRC5477_IRQ_IOPCI_INTD (19 + VRC5477_IRQ_BASE) /* Reserved */
#define VRC5477_IRQ_UART1 (20 + VRC5477_IRQ_BASE)
#define VRC5477_IRQ_SPT0 (21 + VRC5477_IRQ_BASE) /* special purpose timer 0 */
#define VRC5477_IRQ_GPT0 (22 + VRC5477_IRQ_BASE) /* general purpose timer 0 */
#define VRC5477_IRQ_GPT1 (23 + VRC5477_IRQ_BASE) /* general purpose timer 1 */
#define VRC5477_IRQ_GPT2 (24 + VRC5477_IRQ_BASE) /* general purpose timer 2 */
#define VRC5477_IRQ_GPT3 (25 + VRC5477_IRQ_BASE) /* general purpose timer 3 */
#define VRC5477_IRQ_GPIO (26 + VRC5477_IRQ_BASE)
#define VRC5477_IRQ_SIO0 (27 + VRC5477_IRQ_BASE)
#define VRC5477_IRQ_SIO1 (28 + VRC5477_IRQ_BASE)
#define VRC5477_IRQ_RESERVED_29 (29 + VRC5477_IRQ_BASE) /* reserved */
#define VRC5477_IRQ_IOPCISERR (30 + VRC5477_IRQ_BASE) /* IO PCI SERR # */
#define VRC5477_IRQ_IOPCI (31 + VRC5477_IRQ_BASE)
/*
* i2859 irq assignment
*/
#define I8259_IRQ_RESERVED_0 (0 + I8259_IRQ_BASE)
#define I8259_IRQ_KEYBOARD (1 + I8259_IRQ_BASE) /* M1543 default */
#define I8259_IRQ_CASCADE (2 + I8259_IRQ_BASE)
#define I8259_IRQ_UART_B (3 + I8259_IRQ_BASE) /* M1543 default, may conflict with RTC according to schematic diagram */
#define I8259_IRQ_UART_A (4 + I8259_IRQ_BASE) /* M1543 default */
#define I8259_IRQ_PARALLEL (5 + I8259_IRQ_BASE) /* M1543 default */
#define I8259_IRQ_RESERVED_6 (6 + I8259_IRQ_BASE)
#define I8259_IRQ_RESERVED_7 (7 + I8259_IRQ_BASE)
#define I8259_IRQ_RTC (8 + I8259_IRQ_BASE) /* who set this? */
#define I8259_IRQ_USB (9 + I8259_IRQ_BASE) /* ddb_setup */
#define I8259_IRQ_PMU (10 + I8259_IRQ_BASE) /* ddb_setup */
#define I8259_IRQ_RESERVED_11 (11 + I8259_IRQ_BASE)
#define I8259_IRQ_RESERVED_12 (12 + I8259_IRQ_BASE) /* m1543_irq_setup */
#define I8259_IRQ_RESERVED_13 (13 + I8259_IRQ_BASE)
#define I8259_IRQ_HDC1 (14 + I8259_IRQ_BASE) /* default and ddb_setup */
#define I8259_IRQ_HDC2 (15 + I8259_IRQ_BASE) /* default */
/*
* misc
*/
#define VRC5477_I8259_CASCADE (VRC5477_IRQ_INTC - VRC5477_IRQ_BASE)
#define CPU_VRC5477_CASCADE 2
/*
* debug routines
*/
#ifndef __ASSEMBLY__
#if defined(CONFIG_RUNTIME_DEBUG)
extern void vrc5477_show_pdar_regs(void);
extern void vrc5477_show_pci_regs(void);
extern void vrc5477_show_bar_regs(void);
extern void vrc5477_show_int_regs(void);
extern void vrc5477_show_all_regs(void);
#endif
/*
* RAM size
*/
extern int board_ram_size;
#endif /* !__ASSEMBLY__ */
#endif /* __ASM_DDB5XXX_DDB5477_H */