bf103eb4af
SNDRV_PCM_RATE_CONTINUOUS means that all rates (possibly limited to a certain interval) are supported. There is no need to manually set other rate bits. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Daniel Glöckner <daniel-gl@gmx.net> Signed-off-by: Mark Brown <broonie@linaro.org>
616 lines
16 KiB
C
616 lines
16 KiB
C
/*
|
|
* ALSA SoC I2S Audio Layer for the Stretch S6000 family
|
|
*
|
|
* Author: Daniel Gloeckner, <dg@emlix.com>
|
|
* Copyright: (C) 2009 emlix GmbH <info@emlix.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/soc.h>
|
|
|
|
#include "s6000-i2s.h"
|
|
#include "s6000-pcm.h"
|
|
|
|
struct s6000_i2s_dev {
|
|
dma_addr_t sifbase;
|
|
u8 __iomem *scbbase;
|
|
unsigned int wide;
|
|
unsigned int channel_in;
|
|
unsigned int channel_out;
|
|
unsigned int lines_in;
|
|
unsigned int lines_out;
|
|
struct s6000_pcm_dma_params dma_params;
|
|
};
|
|
|
|
#define S6_I2S_INTERRUPT_STATUS 0x00
|
|
#define S6_I2S_INT_OVERRUN 1
|
|
#define S6_I2S_INT_UNDERRUN 2
|
|
#define S6_I2S_INT_ALIGNMENT 4
|
|
#define S6_I2S_INTERRUPT_ENABLE 0x04
|
|
#define S6_I2S_INTERRUPT_RAW 0x08
|
|
#define S6_I2S_INTERRUPT_CLEAR 0x0C
|
|
#define S6_I2S_INTERRUPT_SET 0x10
|
|
#define S6_I2S_MODE 0x20
|
|
#define S6_I2S_DUAL 0
|
|
#define S6_I2S_WIDE 1
|
|
#define S6_I2S_TX_DEFAULT 0x24
|
|
#define S6_I2S_DATA_CFG(c) (0x40 + 0x10 * (c))
|
|
#define S6_I2S_IN 0
|
|
#define S6_I2S_OUT 1
|
|
#define S6_I2S_UNUSED 2
|
|
#define S6_I2S_INTERFACE_CFG(c) (0x44 + 0x10 * (c))
|
|
#define S6_I2S_DIV_MASK 0x001fff
|
|
#define S6_I2S_16BIT 0x000000
|
|
#define S6_I2S_20BIT 0x002000
|
|
#define S6_I2S_24BIT 0x004000
|
|
#define S6_I2S_32BIT 0x006000
|
|
#define S6_I2S_BITS_MASK 0x006000
|
|
#define S6_I2S_MEM_16BIT 0x000000
|
|
#define S6_I2S_MEM_32BIT 0x008000
|
|
#define S6_I2S_MEM_MASK 0x008000
|
|
#define S6_I2S_CHANNELS_SHIFT 16
|
|
#define S6_I2S_CHANNELS_MASK 0x030000
|
|
#define S6_I2S_SCK_IN 0x000000
|
|
#define S6_I2S_SCK_OUT 0x040000
|
|
#define S6_I2S_SCK_DIR 0x040000
|
|
#define S6_I2S_WS_IN 0x000000
|
|
#define S6_I2S_WS_OUT 0x080000
|
|
#define S6_I2S_WS_DIR 0x080000
|
|
#define S6_I2S_LEFT_FIRST 0x000000
|
|
#define S6_I2S_RIGHT_FIRST 0x100000
|
|
#define S6_I2S_FIRST 0x100000
|
|
#define S6_I2S_CUR_SCK 0x200000
|
|
#define S6_I2S_CUR_WS 0x400000
|
|
#define S6_I2S_ENABLE(c) (0x48 + 0x10 * (c))
|
|
#define S6_I2S_DISABLE_IF 0x02
|
|
#define S6_I2S_ENABLE_IF 0x03
|
|
#define S6_I2S_IS_BUSY 0x04
|
|
#define S6_I2S_DMA_ACTIVE 0x08
|
|
#define S6_I2S_IS_ENABLED 0x10
|
|
|
|
#define S6_I2S_NUM_LINES 4
|
|
|
|
#define S6_I2S_SIF_PORT0 0x0000000
|
|
#define S6_I2S_SIF_PORT1 0x0000080 /* docs say 0x0000010 */
|
|
|
|
static inline void s6_i2s_write_reg(struct s6000_i2s_dev *dev, int reg, u32 val)
|
|
{
|
|
writel(val, dev->scbbase + reg);
|
|
}
|
|
|
|
static inline u32 s6_i2s_read_reg(struct s6000_i2s_dev *dev, int reg)
|
|
{
|
|
return readl(dev->scbbase + reg);
|
|
}
|
|
|
|
static inline void s6_i2s_mod_reg(struct s6000_i2s_dev *dev, int reg,
|
|
u32 mask, u32 val)
|
|
{
|
|
val ^= s6_i2s_read_reg(dev, reg) & ~mask;
|
|
s6_i2s_write_reg(dev, reg, val);
|
|
}
|
|
|
|
static void s6000_i2s_start_channel(struct s6000_i2s_dev *dev, int channel)
|
|
{
|
|
int i, j, cur, prev;
|
|
|
|
/*
|
|
* Wait for WCLK to toggle 5 times before enabling the channel
|
|
* s6000 Family Datasheet 3.6.4:
|
|
* "At least two cycles of WS must occur between commands
|
|
* to disable or enable the interface"
|
|
*/
|
|
j = 0;
|
|
prev = ~S6_I2S_CUR_WS;
|
|
for (i = 1000000; --i && j < 6; ) {
|
|
cur = s6_i2s_read_reg(dev, S6_I2S_INTERFACE_CFG(channel))
|
|
& S6_I2S_CUR_WS;
|
|
if (prev != cur) {
|
|
prev = cur;
|
|
j++;
|
|
}
|
|
}
|
|
if (j < 6)
|
|
printk(KERN_WARNING "s6000-i2s: timeout waiting for WCLK\n");
|
|
|
|
s6_i2s_write_reg(dev, S6_I2S_ENABLE(channel), S6_I2S_ENABLE_IF);
|
|
}
|
|
|
|
static void s6000_i2s_stop_channel(struct s6000_i2s_dev *dev, int channel)
|
|
{
|
|
s6_i2s_write_reg(dev, S6_I2S_ENABLE(channel), S6_I2S_DISABLE_IF);
|
|
}
|
|
|
|
static void s6000_i2s_start(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(rtd->cpu_dai);
|
|
int channel;
|
|
|
|
channel = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
|
|
dev->channel_out : dev->channel_in;
|
|
|
|
s6000_i2s_start_channel(dev, channel);
|
|
}
|
|
|
|
static void s6000_i2s_stop(struct snd_pcm_substream *substream)
|
|
{
|
|
struct snd_soc_pcm_runtime *rtd = substream->private_data;
|
|
struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(rtd->cpu_dai);
|
|
int channel;
|
|
|
|
channel = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
|
|
dev->channel_out : dev->channel_in;
|
|
|
|
s6000_i2s_stop_channel(dev, channel);
|
|
}
|
|
|
|
static int s6000_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
|
|
int after)
|
|
{
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
|
if ((substream->stream == SNDRV_PCM_STREAM_CAPTURE) ^ !after)
|
|
s6000_i2s_start(substream);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
|
if (!after)
|
|
s6000_i2s_stop(substream);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int s6000_i2s_int_sources(struct s6000_i2s_dev *dev)
|
|
{
|
|
unsigned int pending;
|
|
pending = s6_i2s_read_reg(dev, S6_I2S_INTERRUPT_RAW);
|
|
pending &= S6_I2S_INT_ALIGNMENT |
|
|
S6_I2S_INT_UNDERRUN |
|
|
S6_I2S_INT_OVERRUN;
|
|
s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_CLEAR, pending);
|
|
|
|
return pending;
|
|
}
|
|
|
|
static unsigned int s6000_i2s_check_xrun(struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(cpu_dai);
|
|
unsigned int errors;
|
|
unsigned int ret;
|
|
|
|
errors = s6000_i2s_int_sources(dev);
|
|
if (likely(!errors))
|
|
return 0;
|
|
|
|
ret = 0;
|
|
if (errors & S6_I2S_INT_ALIGNMENT)
|
|
printk(KERN_ERR "s6000-i2s: WCLK misaligned\n");
|
|
if (errors & S6_I2S_INT_UNDERRUN)
|
|
ret |= 1 << SNDRV_PCM_STREAM_PLAYBACK;
|
|
if (errors & S6_I2S_INT_OVERRUN)
|
|
ret |= 1 << SNDRV_PCM_STREAM_CAPTURE;
|
|
return ret;
|
|
}
|
|
|
|
static void s6000_i2s_wait_disabled(struct s6000_i2s_dev *dev)
|
|
{
|
|
int channel;
|
|
int n = 50;
|
|
for (channel = 0; channel < 2; channel++) {
|
|
while (--n >= 0) {
|
|
int v = s6_i2s_read_reg(dev, S6_I2S_ENABLE(channel));
|
|
if ((v & S6_I2S_IS_ENABLED)
|
|
|| !(v & (S6_I2S_DMA_ACTIVE | S6_I2S_IS_BUSY)))
|
|
break;
|
|
udelay(20);
|
|
}
|
|
}
|
|
if (n < 0)
|
|
printk(KERN_WARNING "s6000-i2s: timeout disabling interfaces");
|
|
}
|
|
|
|
static int s6000_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(cpu_dai);
|
|
u32 w;
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
w = S6_I2S_SCK_IN | S6_I2S_WS_IN;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFM:
|
|
w = S6_I2S_SCK_OUT | S6_I2S_WS_IN;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
w = S6_I2S_SCK_IN | S6_I2S_WS_OUT;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
w = S6_I2S_SCK_OUT | S6_I2S_WS_OUT;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
w |= S6_I2S_LEFT_FIRST;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
w |= S6_I2S_RIGHT_FIRST;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(0),
|
|
S6_I2S_FIRST | S6_I2S_WS_DIR | S6_I2S_SCK_DIR, w);
|
|
s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(1),
|
|
S6_I2S_FIRST | S6_I2S_WS_DIR | S6_I2S_SCK_DIR, w);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s6000_i2s_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div)
|
|
{
|
|
struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
|
|
|
|
if (!div || (div & 1) || div > (S6_I2S_DIV_MASK + 1) * 2)
|
|
return -EINVAL;
|
|
|
|
s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(div_id),
|
|
S6_I2S_DIV_MASK, div / 2 - 1);
|
|
return 0;
|
|
}
|
|
|
|
static int s6000_i2s_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *dai)
|
|
{
|
|
struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
|
|
int interf;
|
|
u32 w = 0;
|
|
|
|
if (dev->wide)
|
|
interf = 0;
|
|
else {
|
|
w |= (((params_channels(params) - 2) / 2)
|
|
<< S6_I2S_CHANNELS_SHIFT) & S6_I2S_CHANNELS_MASK;
|
|
interf = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
|
|
? dev->channel_out : dev->channel_in;
|
|
}
|
|
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
w |= S6_I2S_16BIT | S6_I2S_MEM_16BIT;
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
w |= S6_I2S_32BIT | S6_I2S_MEM_32BIT;
|
|
break;
|
|
default:
|
|
printk(KERN_WARNING "s6000-i2s: unsupported PCM format %x\n",
|
|
params_format(params));
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (s6_i2s_read_reg(dev, S6_I2S_INTERFACE_CFG(interf))
|
|
& S6_I2S_IS_ENABLED) {
|
|
printk(KERN_ERR "s6000-i2s: interface already enabled\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(interf),
|
|
S6_I2S_CHANNELS_MASK|S6_I2S_MEM_MASK|S6_I2S_BITS_MASK,
|
|
w);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int s6000_i2s_dai_probe(struct snd_soc_dai *dai)
|
|
{
|
|
struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
|
|
struct s6000_snd_platform_data *pdata = dai->dev->platform_data;
|
|
|
|
if (!pdata)
|
|
return -EINVAL;
|
|
|
|
dai->capture_dma_data = &dev->dma_params;
|
|
dai->playback_dma_data = &dev->dma_params;
|
|
|
|
dev->wide = pdata->wide;
|
|
dev->channel_in = pdata->channel_in;
|
|
dev->channel_out = pdata->channel_out;
|
|
dev->lines_in = pdata->lines_in;
|
|
dev->lines_out = pdata->lines_out;
|
|
|
|
s6_i2s_write_reg(dev, S6_I2S_MODE,
|
|
dev->wide ? S6_I2S_WIDE : S6_I2S_DUAL);
|
|
|
|
if (dev->wide) {
|
|
int i;
|
|
|
|
if (dev->lines_in + dev->lines_out > S6_I2S_NUM_LINES)
|
|
return -EINVAL;
|
|
|
|
dev->channel_in = 0;
|
|
dev->channel_out = 1;
|
|
dai->driver->capture.channels_min = 2 * dev->lines_in;
|
|
dai->driver->capture.channels_max = dai->driver->capture.channels_min;
|
|
dai->driver->playback.channels_min = 2 * dev->lines_out;
|
|
dai->driver->playback.channels_max = dai->driver->playback.channels_min;
|
|
|
|
for (i = 0; i < dev->lines_out; i++)
|
|
s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i), S6_I2S_OUT);
|
|
|
|
for (; i < S6_I2S_NUM_LINES - dev->lines_in; i++)
|
|
s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i),
|
|
S6_I2S_UNUSED);
|
|
|
|
for (; i < S6_I2S_NUM_LINES; i++)
|
|
s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i), S6_I2S_IN);
|
|
} else {
|
|
unsigned int cfg[2] = {S6_I2S_UNUSED, S6_I2S_UNUSED};
|
|
|
|
if (dev->lines_in > 1 || dev->lines_out > 1)
|
|
return -EINVAL;
|
|
|
|
dai->driver->capture.channels_min = 2 * dev->lines_in;
|
|
dai->driver->capture.channels_max = 8 * dev->lines_in;
|
|
dai->driver->playback.channels_min = 2 * dev->lines_out;
|
|
dai->driver->playback.channels_max = 8 * dev->lines_out;
|
|
|
|
if (dev->lines_in)
|
|
cfg[dev->channel_in] = S6_I2S_IN;
|
|
if (dev->lines_out)
|
|
cfg[dev->channel_out] = S6_I2S_OUT;
|
|
|
|
s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(0), cfg[0]);
|
|
s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(1), cfg[1]);
|
|
}
|
|
|
|
if (dev->lines_out) {
|
|
if (dev->lines_in) {
|
|
if (!dev->dma_params.dma_out)
|
|
return -ENODEV;
|
|
} else {
|
|
dev->dma_params.dma_out = dev->dma_params.dma_in;
|
|
dev->dma_params.dma_in = 0;
|
|
}
|
|
}
|
|
dev->dma_params.sif_in = dev->sifbase + (dev->channel_in ?
|
|
S6_I2S_SIF_PORT1 : S6_I2S_SIF_PORT0);
|
|
dev->dma_params.sif_out = dev->sifbase + (dev->channel_out ?
|
|
S6_I2S_SIF_PORT1 : S6_I2S_SIF_PORT0);
|
|
dev->dma_params.same_rate = pdata->same_rate | pdata->wide;
|
|
return 0;
|
|
}
|
|
|
|
#define S6000_I2S_RATES SNDRV_PCM_RATE_CONTINUOUS
|
|
#define S6000_I2S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
static const struct snd_soc_dai_ops s6000_i2s_dai_ops = {
|
|
.set_fmt = s6000_i2s_set_dai_fmt,
|
|
.set_clkdiv = s6000_i2s_set_clkdiv,
|
|
.hw_params = s6000_i2s_hw_params,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver s6000_i2s_dai = {
|
|
.probe = s6000_i2s_dai_probe,
|
|
.playback = {
|
|
.channels_min = 2,
|
|
.channels_max = 8,
|
|
.formats = S6000_I2S_FORMATS,
|
|
.rates = S6000_I2S_RATES,
|
|
.rate_min = 0,
|
|
.rate_max = 1562500,
|
|
},
|
|
.capture = {
|
|
.channels_min = 2,
|
|
.channels_max = 8,
|
|
.formats = S6000_I2S_FORMATS,
|
|
.rates = S6000_I2S_RATES,
|
|
.rate_min = 0,
|
|
.rate_max = 1562500,
|
|
},
|
|
.ops = &s6000_i2s_dai_ops,
|
|
};
|
|
|
|
static const struct snd_soc_component_driver s6000_i2s_component = {
|
|
.name = "s6000-i2s",
|
|
};
|
|
|
|
static int s6000_i2s_probe(struct platform_device *pdev)
|
|
{
|
|
struct s6000_i2s_dev *dev;
|
|
struct resource *scbmem, *sifmem, *region, *dma1, *dma2;
|
|
u8 __iomem *mmio;
|
|
int ret;
|
|
|
|
scbmem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!scbmem) {
|
|
dev_err(&pdev->dev, "no mem resource?\n");
|
|
ret = -ENODEV;
|
|
goto err_release_none;
|
|
}
|
|
|
|
region = request_mem_region(scbmem->start, resource_size(scbmem),
|
|
pdev->name);
|
|
if (!region) {
|
|
dev_err(&pdev->dev, "I2S SCB region already claimed\n");
|
|
ret = -EBUSY;
|
|
goto err_release_none;
|
|
}
|
|
|
|
mmio = ioremap(scbmem->start, resource_size(scbmem));
|
|
if (!mmio) {
|
|
dev_err(&pdev->dev, "can't ioremap SCB region\n");
|
|
ret = -ENOMEM;
|
|
goto err_release_scb;
|
|
}
|
|
|
|
sifmem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
if (!sifmem) {
|
|
dev_err(&pdev->dev, "no second mem resource?\n");
|
|
ret = -ENODEV;
|
|
goto err_release_map;
|
|
}
|
|
|
|
region = request_mem_region(sifmem->start, resource_size(sifmem),
|
|
pdev->name);
|
|
if (!region) {
|
|
dev_err(&pdev->dev, "I2S SIF region already claimed\n");
|
|
ret = -EBUSY;
|
|
goto err_release_map;
|
|
}
|
|
|
|
dma1 = platform_get_resource(pdev, IORESOURCE_DMA, 0);
|
|
if (!dma1) {
|
|
dev_err(&pdev->dev, "no dma resource?\n");
|
|
ret = -ENODEV;
|
|
goto err_release_sif;
|
|
}
|
|
|
|
region = request_mem_region(dma1->start, resource_size(dma1),
|
|
pdev->name);
|
|
if (!region) {
|
|
dev_err(&pdev->dev, "I2S DMA region already claimed\n");
|
|
ret = -EBUSY;
|
|
goto err_release_sif;
|
|
}
|
|
|
|
dma2 = platform_get_resource(pdev, IORESOURCE_DMA, 1);
|
|
if (dma2) {
|
|
region = request_mem_region(dma2->start, resource_size(dma2),
|
|
pdev->name);
|
|
if (!region) {
|
|
dev_err(&pdev->dev,
|
|
"I2S DMA region already claimed\n");
|
|
ret = -EBUSY;
|
|
goto err_release_dma1;
|
|
}
|
|
}
|
|
|
|
dev = kzalloc(sizeof(struct s6000_i2s_dev), GFP_KERNEL);
|
|
if (!dev) {
|
|
ret = -ENOMEM;
|
|
goto err_release_dma2;
|
|
}
|
|
dev_set_drvdata(&pdev->dev, dev);
|
|
|
|
dev->sifbase = sifmem->start;
|
|
dev->scbbase = mmio;
|
|
|
|
s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE, 0);
|
|
s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_CLEAR,
|
|
S6_I2S_INT_ALIGNMENT |
|
|
S6_I2S_INT_UNDERRUN |
|
|
S6_I2S_INT_OVERRUN);
|
|
|
|
s6000_i2s_stop_channel(dev, 0);
|
|
s6000_i2s_stop_channel(dev, 1);
|
|
s6000_i2s_wait_disabled(dev);
|
|
|
|
dev->dma_params.check_xrun = s6000_i2s_check_xrun;
|
|
dev->dma_params.trigger = s6000_i2s_trigger;
|
|
dev->dma_params.dma_in = dma1->start;
|
|
dev->dma_params.dma_out = dma2 ? dma2->start : 0;
|
|
dev->dma_params.irq = platform_get_irq(pdev, 0);
|
|
if (dev->dma_params.irq < 0) {
|
|
dev_err(&pdev->dev, "no irq resource?\n");
|
|
ret = -ENODEV;
|
|
goto err_release_dev;
|
|
}
|
|
|
|
s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE,
|
|
S6_I2S_INT_ALIGNMENT |
|
|
S6_I2S_INT_UNDERRUN |
|
|
S6_I2S_INT_OVERRUN);
|
|
|
|
ret = snd_soc_register_component(&pdev->dev, &s6000_i2s_component,
|
|
&s6000_i2s_dai, 1);
|
|
if (ret)
|
|
goto err_release_dev;
|
|
|
|
return 0;
|
|
|
|
err_release_dev:
|
|
kfree(dev);
|
|
err_release_dma2:
|
|
if (dma2)
|
|
release_mem_region(dma2->start, resource_size(dma2));
|
|
err_release_dma1:
|
|
release_mem_region(dma1->start, resource_size(dma1));
|
|
err_release_sif:
|
|
release_mem_region(sifmem->start, resource_size(sifmem));
|
|
err_release_map:
|
|
iounmap(mmio);
|
|
err_release_scb:
|
|
release_mem_region(scbmem->start, resource_size(scbmem));
|
|
err_release_none:
|
|
return ret;
|
|
}
|
|
|
|
static void s6000_i2s_remove(struct platform_device *pdev)
|
|
{
|
|
struct s6000_i2s_dev *dev = dev_get_drvdata(&pdev->dev);
|
|
struct resource *region;
|
|
void __iomem *mmio = dev->scbbase;
|
|
|
|
snd_soc_unregister_component(&pdev->dev);
|
|
|
|
s6000_i2s_stop_channel(dev, 0);
|
|
s6000_i2s_stop_channel(dev, 1);
|
|
|
|
s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE, 0);
|
|
kfree(dev);
|
|
|
|
region = platform_get_resource(pdev, IORESOURCE_DMA, 0);
|
|
release_mem_region(region->start, resource_size(region));
|
|
|
|
region = platform_get_resource(pdev, IORESOURCE_DMA, 1);
|
|
if (region)
|
|
release_mem_region(region->start, resource_size(region));
|
|
|
|
region = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
release_mem_region(region->start, resource_size(region));
|
|
|
|
iounmap(mmio);
|
|
region = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
release_mem_region(region->start, resource_size(region));
|
|
}
|
|
|
|
static struct platform_driver s6000_i2s_driver = {
|
|
.probe = s6000_i2s_probe,
|
|
.remove = s6000_i2s_remove,
|
|
.driver = {
|
|
.name = "s6000-i2s",
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(s6000_i2s_driver);
|
|
|
|
MODULE_AUTHOR("Daniel Gloeckner");
|
|
MODULE_DESCRIPTION("Stretch s6000 family I2S SoC Interface");
|
|
MODULE_LICENSE("GPL");
|