kernel-ark/include/asm-arm/arch-lh7a40x/irqs.h
Linus Torvalds cee4cca740 Merge git://git.infradead.org/hdrcleanup-2.6
* git://git.infradead.org/hdrcleanup-2.6: (63 commits)
  [S390] __FD_foo definitions.
  Switch to __s32 types in joystick.h instead of C99 types for consistency.
  Add <sys/types.h> to headers included for userspace in <linux/input.h>
  Move inclusion of <linux/compat.h> out of user scope in asm-x86_64/mtrr.h
  Remove struct fddi_statistics from user view in <linux/if_fddi.h>
  Move user-visible parts of drivers/s390/crypto/z90crypt.h to include/asm-s390
  Revert include/media changes: Mauro says those ioctls are only used in-kernel(!)
  Include <linux/types.h> and use __uXX types in <linux/cramfs_fs.h>
  Use __uXX types in <linux/i2o_dev.h>, include <linux/ioctl.h> too
  Remove private struct dx_hash_info from public view in <linux/ext3_fs.h>
  Include <linux/types.h> and use __uXX types in <linux/affs_hardblocks.h>
  Use __uXX types in <linux/divert.h> for struct divert_blk et al.
  Use __u32 for elf_addr_t in <asm-powerpc/elf.h>, not u32. It's user-visible.
  Remove PPP_FCS from user view in <linux/ppp_defs.h>, remove __P mess entirely
  Use __uXX types in user-visible structures in <linux/nbd.h>
  Don't use 'u32' in user-visible struct ip_conntrack_old_tuple.
  Use __uXX types for S390 DASD volume label definitions which are user-visible
  S390 BIODASDREADCMB ioctl should use __u64 not u64 type.
  Remove unneeded inclusion of <linux/time.h> from <linux/ufs_fs.h>
  Fix private integer types used in V4L2 ioctls.
  ...

Manually resolve conflict in include/linux/mtd/physmap.h
2006-06-20 15:10:08 -07:00

201 lines
6.8 KiB
C

/* include/asm-arm/arch-lh7a40x/irqs.h
*
* Copyright (C) 2004 Coastal Environmental Systems
* Copyright (C) 2004 Logic Product Development
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
*/
/* It is to be seen whether or not we can build a kernel for more than
* one board. For the time being, these macros assume that we cannot.
* Thus, it is OK to ifdef machine/board specific IRQ assignments.
*/
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
#define FIQ_START 80
#if defined (CONFIG_ARCH_LH7A400)
/* FIQs */
# define IRQ_GPIO0FIQ 0 /* GPIO External FIQ Interrupt on F0 */
# define IRQ_BLINT 1 /* Battery Low */
# define IRQ_WEINT 2 /* Watchdog Timer, WDT overflow */
# define IRQ_MCINT 3 /* Media Change, MEDCHG pin rising */
/* IRQs */
# define IRQ_CSINT 4 /* Audio Codec (ACI) */
# define IRQ_GPIO1INTR 5 /* GPIO External IRQ Interrupt on F1 */
# define IRQ_GPIO2INTR 6 /* GPIO External IRQ Interrupt on F2 */
# define IRQ_GPIO3INTR 7 /* GPIO External IRQ Interrupt on F3 */
# define IRQ_T1UI 8 /* Timer 1 underflow */
# define IRQ_T2UI 9 /* Timer 2 underflow */
# define IRQ_RTCMI 10
# define IRQ_TINTR 11 /* Clock State Controller 64 Hz tick (CSC) */
# define IRQ_UART1INTR 12
# define IRQ_UART2INTR 13
# define IRQ_LCDINTR 14
# define IRQ_SSIEOT 15 /* Synchronous Serial Interface (SSI) */
# define IRQ_UART3INTR 16
# define IRQ_SCIINTR 17 /* Smart Card Interface (SCI) */
# define IRQ_AACINTR 18 /* Advanced Audio Codec (AAC) */
# define IRQ_MMCINTR 19 /* Multimedia Card (MMC) */
# define IRQ_USBINTR 20
# define IRQ_DMAINTR 21
# define IRQ_T3UI 22 /* Timer 3 underflow */
# define IRQ_GPIO4INTR 23 /* GPIO External IRQ Interrupt on F4 */
# define IRQ_GPIO5INTR 24 /* GPIO External IRQ Interrupt on F5 */
# define IRQ_GPIO6INTR 25 /* GPIO External IRQ Interrupt on F6 */
# define IRQ_GPIO7INTR 26 /* GPIO External IRQ Interrupt on F7 */
# define IRQ_BMIINTR 27 /* Battery Monitor Interface (BMI) */
# define NR_IRQ_CPU 28 /* IRQs directly recognized by CPU */
/* Given IRQ, return GPIO interrupt number 0-7 */
# define IRQ_TO_GPIO(i) ((i) \
- (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
- (((i) > IRQ_GPIO0INTR) ? IRQ_GPIO1INTR - IRQ_GPIO0INTR - 1 : 0))
#endif
#if defined (CONFIG_ARCH_LH7A404)
# define IRQ_BROWN 0 /* Brownout */
# define IRQ_WDTINTR 1 /* Watchdog Timer */
# define IRQ_COMMRX 2 /* ARM Comm Rx for Debug */
# define IRQ_COMMTX 3 /* ARM Comm Tx for Debug */
# define IRQ_T1UI 4 /* Timer 1 underflow */
# define IRQ_T2UI 5 /* Timer 2 underflow */
# define IRQ_CSINT 6 /* Codec Interrupt (shared by AAC on 404) */
# define IRQ_DMAM2P0 7 /* -- DMA Memory to Peripheral */
# define IRQ_DMAM2P1 8
# define IRQ_DMAM2P2 9
# define IRQ_DMAM2P3 10
# define IRQ_DMAM2P4 11
# define IRQ_DMAM2P5 12
# define IRQ_DMAM2P6 13
# define IRQ_DMAM2P7 14
# define IRQ_DMAM2P8 15
# define IRQ_DMAM2P9 16
# define IRQ_DMAM2M0 17 /* -- DMA Memory to Memory */
# define IRQ_DMAM2M1 18
# define IRQ_GPIO0INTR 19 /* -- GPIOF Interrupt */
# define IRQ_GPIO1INTR 20
# define IRQ_GPIO2INTR 21
# define IRQ_GPIO3INTR 22
# define IRQ_SOFT_V1_23 23 /* -- Unassigned */
# define IRQ_SOFT_V1_24 24
# define IRQ_SOFT_V1_25 25
# define IRQ_SOFT_V1_26 26
# define IRQ_SOFT_V1_27 27
# define IRQ_SOFT_V1_28 28
# define IRQ_SOFT_V1_29 29
# define IRQ_SOFT_V1_30 30
# define IRQ_SOFT_V1_31 31
# define IRQ_BLINT 32 /* Battery Low */
# define IRQ_BMIINTR 33 /* Battery Monitor */
# define IRQ_MCINTR 34 /* Media Change */
# define IRQ_TINTR 35 /* 64Hz Tick */
# define IRQ_WEINT 36 /* Watchdog Expired */
# define IRQ_RTCMI 37 /* Real-time Clock Match */
# define IRQ_UART1INTR 38 /* UART1 Interrupt (including error) */
# define IRQ_UART1ERR 39 /* UART1 Error */
# define IRQ_UART2INTR 40 /* UART2 Interrupt (including error) */
# define IRQ_UART2ERR 41 /* UART2 Error */
# define IRQ_UART3INTR 42 /* UART3 Interrupt (including error) */
# define IRQ_UART3ERR 43 /* UART3 Error */
# define IRQ_SCIINTR 44 /* Smart Card */
# define IRQ_TSCINTR 45 /* Touchscreen */
# define IRQ_KMIINTR 46 /* Keyboard/Mouse (PS/2) */
# define IRQ_GPIO4INTR 47 /* -- GPIOF Interrupt */
# define IRQ_GPIO5INTR 48
# define IRQ_GPIO6INTR 49
# define IRQ_GPIO7INTR 50
# define IRQ_T3UI 51 /* Timer 3 underflow */
# define IRQ_LCDINTR 52 /* LCD Controller */
# define IRQ_SSPINTR 53 /* Synchronous Serial Port */
# define IRQ_SDINTR 54 /* Secure Digital Port (MMC) */
# define IRQ_USBINTR 55 /* USB Device Port */
# define IRQ_USHINTR 56 /* USB Host Port */
# define IRQ_SOFT_V2_25 57 /* -- Unassigned */
# define IRQ_SOFT_V2_26 58
# define IRQ_SOFT_V2_27 59
# define IRQ_SOFT_V2_28 60
# define IRQ_SOFT_V2_29 61
# define IRQ_SOFT_V2_30 62
# define IRQ_SOFT_V2_31 63
# define NR_IRQ_CPU 64 /* IRQs directly recognized by CPU */
/* Given IRQ, return GPIO interrupt number 0-7 */
# define IRQ_TO_GPIO(i) ((i) \
- (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
- IRQ_GPIO0INTR)
/* Vector Address constants */
# define VA_VECTORED 0x100 /* Set for vectored interrupt */
# define VA_VIC1DEFAULT 0x200 /* Set as default VECTADDR for VIC1 */
# define VA_VIC2DEFAULT 0x400 /* Set as default VECTADDR for VIC2 */
#endif
/* IRQ aliases */
#if !defined (IRQ_GPIO0INTR)
# define IRQ_GPIO0INTR IRQ_GPIO0FIQ
#endif
#define IRQ_TICK IRQ_TINTR
#define IRQ_PCC1_RDY IRQ_GPIO6INTR /* PCCard 1 ready */
#define IRQ_PCC2_RDY IRQ_GPIO7INTR /* PCCard 2 ready */
#define IRQ_USB IRQ_USBINTR /* USB device */
#ifdef CONFIG_MACH_KEV7A400
# define IRQ_TS IRQ_GPIOFIQ /* Touchscreen */
# define IRQ_CPLD IRQ_GPIO1INTR /* CPLD cascade */
# define IRQ_PCC1_CD IRQ_GPIO_F2 /* PCCard 1 card detect */
# define IRQ_PCC2_CD IRQ_GPIO_F3 /* PCCard 2 card detect */
#endif
#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
# define IRQ_CPLD_V28 IRQ_GPIO7INTR /* CPLD cascade through GPIO_PF7 */
# define IRQ_CPLD_V34 IRQ_GPIO3INTR /* CPLD cascade through GPIO_PF3 */
#endif
/* System specific IRQs */
#define IRQ_BOARD_START NR_IRQ_CPU
#ifdef CONFIG_MACH_KEV7A400
# define IRQ_KEV7A400_CPLD IRQ_BOARD_START
# define NR_IRQ_BOARD 5
# define IRQ_KEV7A400_MMC_CD IRQ_KEV7A400_CPLD + 0 /* MMC Card Detect */
# define IRQ_KEV7A400_RI2 IRQ_KEV7A400_CPLD + 1 /* Ring Indicator 2 */
# define IRQ_KEV7A400_IDE_CF IRQ_KEV7A400_CPLD + 2 /* Compact Flash (?) */
# define IRQ_KEV7A400_ETH_INT IRQ_KEV7A400_CPLD + 3 /* Ethernet chip */
# define IRQ_KEV7A400_INT IRQ_KEV7A400_CPLD + 4
#endif
#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
# define IRQ_LPD7A40X_CPLD IRQ_BOARD_START
# define NR_IRQ_BOARD 2
# define IRQ_LPD7A40X_ETH_INT IRQ_LPD7A40X_CPLD + 0 /* Ethernet chip */
# define IRQ_LPD7A400_TS IRQ_LPD7A40X_CPLD + 1 /* Touch screen */
#endif
#if defined (CONFIG_MACH_LPD7A400)
# define IRQ_TOUCH IRQ_LPD7A400_TS
#endif
#define NR_IRQS (NR_IRQ_CPU + NR_IRQ_BOARD)
#endif