Breno Leitao 95caa0a9bd icom: fix rmmod crash ... Actually the icom driver is crashing when is being removed because the driver is kfreeing the adapter structure before calling pci_release_regions(), which result in the following error: Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6d33 Faulting instruction address: 0xc000000000246b80 Oops: Kernel access of bad area, sig: 11 [#1] .... [c000000012d436a0] [c0000000001002d0] .kfree+0x120/0x34c (unreliable) [c000000012d43730] [c000000000246d60] .pci_release_selected_regions+0x3c/0x68 [c000000012d437c0] [d000000002d54700] .icom_kref_release+0xf4/0x118 [icom] [c000000012d43850] [c000000000232e50] .kref_put+0x74/0x94 [c000000012d438d0] [d000000002d56c58] .icom_remove+0x40/0xa4 [icom] [c000000012d43960] [c000000000249e48] .pci_device_remove+0x50/0x90 [c000000012d439e0] [c0000000002d68d8] .__device_release_driver+0x94/0xd4 [c000000012d43a70] [c0000000002d7104] .driver_detach+0xf8/0x12c [c000000012d43b00] [c0000000002d549c] .bus_remove_driver+0xbc/0x11c [c000000012d43b90] [c0000000002d71dc] .driver_unregister+0x60/0x80 [c000000012d43c20] [c00000000024a07c] .pci_unregister_driver+0x44/0xe8 [c000000012d43cb0] [d000000002d56bf4] .icom_exit+0x1c/0x40 [icom] [c000000012d43d30] [c000000000095fa8] .SyS_delete_module+0x214/0x2a8 [c000000012d43e30] [c00000000000852c] syscall_exit+0x0/0x40 Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Cc: stable@kernel.org Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>		2009-05-22 21:47:52 -07:00
..
cpm_uart	cpm_uart: Disable CPM udbg when re-initing CPM uart, even if not the console.	2009-04-06 09:09:33 -05:00
jsm	jsm: removing unused spinlock	2009-05-06 14:47:13 -07:00
8250_accent.c
8250_acorn.c
8250_boca.c
8250_early.c
8250_exar_st16c554.c
8250_fourport.c
8250_gsc.c
8250_hp300.c
8250_hub6.c
8250_mca.c
8250_pci.c	serial: remove contact data	2009-04-24 07:52:08 -07:00
8250_pnp.c	serial: Update PNP IDs	2009-04-06 14:36:26 -07:00
8250.c	8250: fix boot hang with serial console when using with Serial Over Lan port	2009-02-20 17:57:50 -08:00
8250.h
21285.c	[ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h	2009-03-25 10:21:35 +00:00
68328serial.c
68328serial.h
68360serial.c
amba-pl010.c	[ARM] 5519/1: amba probe: pass "struct amba_id *" instead of void *	2009-05-20 23:26:51 +01:00
amba-pl011.c	[ARM] 5519/1: amba probe: pass "struct amba_id *" instead of void *	2009-05-20 23:26:51 +01:00
atmel_serial.c	avr32: add hardware handshake support to atmel_serial	2009-04-01 16:13:51 +02:00
bfin_5xx.c	bfin_5xx: misplaced parentheses	2009-04-21 13:41:51 -07:00
bfin_sport_uart.c
bfin_sport_uart.h
clps711x.c	[ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h	2009-03-25 10:21:35 +00:00
crisv10.c	CRISv10: fix serial driver proc-usage	2009-05-02 15:36:09 -07:00
crisv10.h	tty: Use the generic RS485 ioctl on CRIS	2009-04-07 08:44:05 -07:00
dz.c
dz.h
icom.c	icom: fix rmmod crash	2009-05-22 21:47:52 -07:00
icom.h
imx.c	[ARM] MXC: remove _clk suffix from clock names	2009-03-13 10:33:48 +01:00
ioc3_serial.c
ioc4_serial.c
ip22zilog.c
ip22zilog.h
Kconfig	Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze	2009-04-13 08:17:52 -07:00
kgdboc.c
m32r_sio_reg.h
m32r_sio.c
m32r_sio.h
Makefile	Add support for the MAX3100 SPI UART.	2009-04-07 08:44:05 -07:00
max3100.c	tty: MAX3100	2009-04-08 14:33:38 -07:00
mcf.c	m68knommu: Fix support for console port other than ttyS0 on mcf.c	2009-03-24 15:17:43 +10:00
mpc52xx_uart.c	powerpc/5200: Don't specify IRQF_SHARED in PSC UART driver	2009-02-04 11:23:56 -07:00
mpsc.c
mux.c
netx-serial.c
nwpserial.c	serial/nwpserial: Fix wrong register read address and add interrupt acknowledge.	2009-05-15 16:43:42 +10:00
of_serial.c
pmac_zilog.c	powerpc/pmac: Fix internal modem IRQ on Wallstreet PowerBook	2009-04-07 15:07:43 +10:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c	[ARM] pxa: remove machine class specific stuffs from serial driver	2009-03-09 21:22:38 +08:00
s3c24a0.c
s3c2400.c
s3c2410.c
s3c2412.c
s3c2440.c
s3c6400.c	[ARM] S3C: Add UDIVSLOT support for newer UARTS	2009-05-01 12:28:16 +01:00
sa1100.c	[ARM] acorn,ebsa110,footbridge,integrator,sa1100: Convert asm/io.h to linux/io.h	2009-03-25 10:21:35 +00:00
samsung.c	[ARM] S3C: Add UDIVSLOT support for newer UARTS	2009-05-01 12:28:16 +01:00
samsung.h	[ARM] S3C: Add UDIVSLOT support for newer UARTS	2009-05-01 12:28:16 +01:00
sb1250-duart.c
sc26xx.c
serial_core.c	serial: fixup /proc/tty/driver/serial after proc_fops conversion	2009-04-01 14:50:48 -07:00
serial_cs.c
serial_ks8695.c
serial_lh7a40x.c
serial_txx9.c
sh-sci.c	sh: Add support for SH7786 CPU subtype.	2009-03-03 15:40:25 +09:00
sh-sci.h	sh: Add support for SH7786 CPU subtype.	2009-03-03 15:40:25 +09:00
sn_console.c
suncore.c
suncore.h
sunhv.c
sunsab.c
sunsab.h
sunsu.c	serial: sunsu: sunsu_kbd_ms_init needs to be __devinit	2009-04-08 03:29:03 -07:00
sunzilog.c	serial: struct device - replace bus_id with dev_name(), dev_set_name()	2009-03-24 16:38:21 -07:00
sunzilog.h
uartlite.c
ucc_uart.c	ucc: Fix leaky error path	2009-04-06 14:36:32 -07:00
vr41xx_siu.c
zs.c
zs.h