6e4206136f
Building for the ColdFire 5271 produces the following warning: arch/m68k/coldfire/m527x.c: In function ‘m527x_fec_init’: arch/m68k/coldfire/m527x.c:95:6: warning: unused variable ‘par’ Fix it by moving the definition of par inside the 5271 conditional code. Reported-by: ertheb <3rth3bnospam@ethe.fr> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
128 lines
3.3 KiB
C
128 lines
3.3 KiB
C
/***************************************************************************/
|
|
|
|
/*
|
|
* m527x.c -- platform support for ColdFire 527x based boards
|
|
*
|
|
* Sub-architcture dependent initialization code for the Freescale
|
|
* 5270/5271 and 5274/5275 CPUs.
|
|
*
|
|
* Copyright (C) 1999-2004, Greg Ungerer (gerg@snapgear.com)
|
|
* Copyright (C) 2001-2004, SnapGear Inc. (www.snapgear.com)
|
|
*/
|
|
|
|
/***************************************************************************/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/param.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/coldfire.h>
|
|
#include <asm/mcfsim.h>
|
|
#include <asm/mcfuart.h>
|
|
#include <asm/mcfclk.h>
|
|
|
|
/***************************************************************************/
|
|
|
|
DEFINE_CLK(pll, "pll.0", MCF_CLK);
|
|
DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
|
|
DEFINE_CLK(mcfpit0, "mcfpit.0", MCF_CLK);
|
|
DEFINE_CLK(mcfpit1, "mcfpit.1", MCF_CLK);
|
|
DEFINE_CLK(mcfpit2, "mcfpit.2", MCF_CLK);
|
|
DEFINE_CLK(mcfpit3, "mcfpit.3", MCF_CLK);
|
|
DEFINE_CLK(mcfuart0, "mcfuart.0", MCF_BUSCLK);
|
|
DEFINE_CLK(mcfuart1, "mcfuart.1", MCF_BUSCLK);
|
|
DEFINE_CLK(mcfuart2, "mcfuart.2", MCF_BUSCLK);
|
|
DEFINE_CLK(mcfqspi0, "mcfqspi.0", MCF_BUSCLK);
|
|
DEFINE_CLK(fec0, "fec.0", MCF_BUSCLK);
|
|
DEFINE_CLK(fec1, "fec.1", MCF_BUSCLK);
|
|
|
|
struct clk *mcf_clks[] = {
|
|
&clk_pll,
|
|
&clk_sys,
|
|
&clk_mcfpit0,
|
|
&clk_mcfpit1,
|
|
&clk_mcfpit2,
|
|
&clk_mcfpit3,
|
|
&clk_mcfuart0,
|
|
&clk_mcfuart1,
|
|
&clk_mcfuart2,
|
|
&clk_mcfqspi0,
|
|
&clk_fec0,
|
|
&clk_fec1,
|
|
NULL
|
|
};
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m527x_qspi_init(void)
|
|
{
|
|
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
|
|
#if defined(CONFIG_M5271)
|
|
u16 par;
|
|
|
|
/* setup QSPS pins for QSPI with gpio CS control */
|
|
writeb(0x1f, MCFGPIO_PAR_QSPI);
|
|
/* and CS2 & CS3 as gpio */
|
|
par = readw(MCFGPIO_PAR_TIMER);
|
|
par &= 0x3f3f;
|
|
writew(par, MCFGPIO_PAR_TIMER);
|
|
#elif defined(CONFIG_M5275)
|
|
/* setup QSPS pins for QSPI with gpio CS control */
|
|
writew(0x003e, MCFGPIO_PAR_QSPI);
|
|
#endif
|
|
#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m527x_uarts_init(void)
|
|
{
|
|
u16 sepmask;
|
|
|
|
/*
|
|
* External Pin Mask Setting & Enable External Pin for Interface
|
|
*/
|
|
sepmask = readw(MCFGPIO_PAR_UART);
|
|
sepmask |= UART0_ENABLE_MASK | UART1_ENABLE_MASK | UART2_ENABLE_MASK;
|
|
writew(sepmask, MCFGPIO_PAR_UART);
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m527x_fec_init(void)
|
|
{
|
|
u8 v;
|
|
|
|
/* Set multi-function pins to ethernet mode for fec0 */
|
|
#if defined(CONFIG_M5271)
|
|
v = readb(MCFGPIO_PAR_FECI2C);
|
|
writeb(v | 0xf0, MCFGPIO_PAR_FECI2C);
|
|
#else
|
|
u16 par;
|
|
|
|
par = readw(MCFGPIO_PAR_FECI2C);
|
|
writew(par | 0xf00, MCFGPIO_PAR_FECI2C);
|
|
v = readb(MCFGPIO_PAR_FEC0HL);
|
|
writeb(v | 0xc0, MCFGPIO_PAR_FEC0HL);
|
|
|
|
/* Set multi-function pins to ethernet mode for fec1 */
|
|
par = readw(MCFGPIO_PAR_FECI2C);
|
|
writew(par | 0xa0, MCFGPIO_PAR_FECI2C);
|
|
v = readb(MCFGPIO_PAR_FEC1HL);
|
|
writeb(v | 0xc0, MCFGPIO_PAR_FEC1HL);
|
|
#endif
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
void __init config_BSP(char *commandp, int size)
|
|
{
|
|
mach_sched_init = hw_timer_init;
|
|
m527x_uarts_init();
|
|
m527x_fec_init();
|
|
m527x_qspi_init();
|
|
}
|
|
|
|
/***************************************************************************/
|