kernel-ark/arch/m32r/boot/setup.S
Hirokazu Takata 9b791d4766 [PATCH] m32r: Fix M32104 cache flushing routines
This patch fixes cache memory parameter setting for the M32104 target.  So
far, its performance seemed to have been degraded due to incorrect cache
parameter setting.

  * arch/m32r/boot/setup.S: Set SFR(Special Fuction Registers) region
    to be non-cachable explicitly.
  * arch/m32r/mm/cache.c: Fix cache flushing routines not to switch off
    the M32104 cache.

Signed-off-by: Hayato Fujiwara <fujiwara@linux-m32r.org>
Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06 08:33:44 -08:00

186 lines
4.2 KiB
ArmAsm

/*
* linux/arch/m32r/boot/setup.S -- A setup code.
*
* Copyright (C) 2001-2005 Hiroyuki Kondo, Hirokazu Takata,
* Hitoshi Yamamoto, Hayato Fujiwara
*
*/
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <linux/config.h>
#include <asm/assembler.h>
#include <asm/mmu_context.h>
#include <asm/m32r.h>
/*
* References to members of the boot_cpu_data structure.
*/
#define CPU_PARAMS boot_cpu_data
#define M32R_MCICAR 0xfffffff0
#define M32R_MCDCAR 0xfffffff4
#define M32R_MCCR 0xfffffffc
#define M32R_BSCR0 0xffffffd2
;BSEL
#define BSEL0CR0 0x00ef5000
#define BSEL0CR1 0x00ef5004
#define BSEL1CR0 0x00ef5100
#define BSEL1CR1 0x00ef5104
#define BSEL0CR0_VAL 0x00000000
#define BSEL0CR1_VAL 0x01200100
#define BSEL1CR0_VAL 0x01018000
#define BSEL1CR1_VAL 0x00200001
;SDRAMC
#define SDRAMC_SDRF0 0x00ef6000
#define SDRAMC_SDRF1 0x00ef6004
#define SDRAMC_SDIR0 0x00ef6008
#define SDRAMC_SDIR1 0x00ef600c
#define SDRAMC_SD0ADR 0x00ef6020
#define SDRAMC_SD0ER 0x00ef6024
#define SDRAMC_SD0TR 0x00ef6028
#define SDRAMC_SD0MOD 0x00ef602c
#define SDRAMC_SD1ADR 0x00ef6040
#define SDRAMC_SD1ER 0x00ef6044
#define SDRAMC_SD1TR 0x00ef6048
#define SDRAMC_SD1MOD 0x00ef604c
#define SDRAM0 0x18000000
#define SDRAM1 0x1c000000
/*------------------------------------------------------------------------
* start up
*/
/*------------------------------------------------------------------------
* Kernel entry
*/
.section .boot, "ax"
ENTRY(boot)
/* Set cache mode */
#if defined(CONFIG_CHIP_XNUX2)
ldi r0, #-2 ;LDIMM (r0, M32R_MCCR)
ldi r1, #0x0101 ; cache on (with invalidation)
; ldi r1, #0x00 ; cache off
sth r1, @r0
#elif defined(CONFIG_CHIP_M32700) || defined(CONFIG_CHIP_VDEC2) \
|| defined(CONFIG_CHIP_OPSP)
ldi r0, #-4 ;LDIMM (r0, M32R_MCCR)
ldi r1, #0x73 ; cache on (with invalidation)
; ldi r1, #0x00 ; cache off
st r1, @r0
#elif defined(CONFIG_CHIP_M32102)
ldi r0, #-4 ;LDIMM (r0, M32R_MCCR)
ldi r1, #0x101 ; cache on (with invalidation)
; ldi r1, #0x00 ; cache off
st r1, @r0
#elif defined(CONFIG_CHIP_M32104)
ldi r0, #-96 ; DNCR0
seth r1, #0x0060 ; from 0x00600000
or3 r1, r1, #0x0005 ; size 2MB
st r1, @r0
seth r1, #0x0100 ; from 0x01000000
or3 r1, r1, #0x0003 ; size 16MB
st r1, @+r0
seth r1, #0x0200 ; from 0x02000000
or3 r1, r1, #0x0002 ; size 32MB
st r1, @+r0
ldi r0, #-4 ;LDIMM (r0, M32R_MCCR)
ldi r1, #0x703 ; cache on (with invalidation)
st r1, @r0
#else
#error unknown chip configuration
#endif
#ifdef CONFIG_SMP
;; if not BSP (CPU#0) goto AP_loop
seth r5, #shigh(M32R_CPUID_PORTL)
ld r5, @(low(M32R_CPUID_PORTL), r5)
bnez r5, AP_loop
#if !defined(CONFIG_PLAT_USRV)
;; boot AP
ld24 r5, #0xeff2f8 ; IPICR7
ldi r6, #0x2 ; IPI to CPU1
st r6, @r5
#endif
#endif
/*
* Now, Jump to stext
* if with MMU, TLB on.
* if with no MMU, only jump.
*/
.global eit_vector
mmu_on:
LDIMM (r13, stext)
#ifdef CONFIG_MMU
bl init_tlb
LDIMM (r2, eit_vector) ; set EVB(cr5)
mvtc r2, cr5
seth r0, #high(MMU_REG_BASE) ; Set MMU_REG_BASE higher
or3 r0, r0, #low(MMU_REG_BASE) ; Set MMU_REG_BASE lower
ldi r1, #0x01
st r1, @(MATM_offset,r0) ; Set MATM (T bit ON)
ld r0, @(MATM_offset,r0) ; Check
#else
#if defined(CONFIG_CHIP_M32700)
seth r0,#high(M32R_MCDCAR)
or3 r0,r0,#low(M32R_MCDCAR)
ld24 r1,#0x8080
st r1,@r0
#elif defined(CONFIG_CHIP_M32104)
LDIMM (r2, eit_vector) ; set EVB(cr5)
mvtc r2, cr5
#endif
#endif /* CONFIG_MMU */
jmp r13
nop
nop
#ifdef CONFIG_SMP
/*
* AP wait loop
*/
ENTRY(AP_loop)
;; disable interrupt
clrpsw #0x40
;; reset EVB
LDIMM (r4, _AP_RE)
seth r5, #high(__PAGE_OFFSET)
or3 r5, r5, #low(__PAGE_OFFSET)
not r5, r5
and r4, r5
mvtc r4, cr5
;; disable maskable interrupt
seth r4, #high(M32R_ICU_IMASK_PORTL)
or3 r4, r4, #low(M32R_ICU_IMASK_PORTL)
ldi r5, #0
st r5, @r4
ld r5, @r4
;; enable only IPI
setpsw #0x40
;; LOOOOOOOOOOOOOOP!!!
.fillinsn
2:
nop
nop
bra 2b
nop
nop
#ifdef CONFIG_CHIP_M32700_TS1
.global dcache_dummy
.balign 16, 0
dcache_dummy:
.byte 16
#endif /* CONFIG_CHIP_M32700_TS1 */
#endif /* CONFIG_SMP */
.end