davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
a0a9663dd2
kernel-ark/include/linux/iio/iio.h
Lars-Peter Clausen b4e3ac0a20 iio: Extend the event config interface 
The event configuration interface of the IIO framework has not been getting the
same attention as other parts. As a result it has not seen the same improvements
as e.g. the channel interface has seen with the introduction of the channel spec
struct. Currently all the event config callbacks take a u64 (the so called event
code) to pass all the different information about for which event the callback
is invoked. The callback function then has to extract the information it is
interested in using some macros with rather long names. Most information encoded
in the event code comes straight from the iio_chan_spec struct the event was
registered for. Since we always have a handle to the channel spec when we call
the event callbacks the first step is to add the channel spec as a parameter to
the event callbacks. The two remaining things encoded in the event code are the
type and direction of the event. Instead of passing them in one parameter, add
one parameter for each of them and remove the eventcode from the event
callbacks. The patch also adds a new iio_event_info parameter to the
{read,write}_event_value callbacks. This makes it possible, similar to the
iio_chan_info_enum for channels, to specify additional properties other than
just the value for an event. Furthermore the new interface will allow to
register shared events. This is e.g. useful if a device allows configuring a
threshold event, but the threshold setting is the same for all channels.

To implement this the patch adds a new iio_event_spec struct which is similar to
the iio_chan_spec struct. It as two field to specify the type and the direction
of the event. Furthermore it has a mask field for each one of the different
iio_shared_by types. These mask fields holds which kind of attributes should be
registered for the event. Creation of the attributes follows the same rules as
the for the channel attributes. E.g. for the separate_mask there will be a
attribute for each channel with this event, for the shared_by_type there will
only be one attribute per channel type. The iio_chan_spec struct gets two new
fields, 'event_spec' and 'num_event_specs', which is used to specify which the
events for this channel. These two fields are going to replace the channel's
event_mask field.

For now both the old and the new event config interface coexist, but over the
few patches all drivers will be converted from the old to the new interface.
Once that is done all code for supporting the old interface will be removed.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2013-10-12 12:32:19 +01:00

705 lines
23 KiB
C
Raw Blame History

/* The industrial I/O core
*
* Copyright (c) 2008 Jonathan Cameron
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#ifndef _INDUSTRIAL_IO_H_
#define _INDUSTRIAL_IO_H_
#include <linux/device.h>
#include <linux/cdev.h>
#include <linux/iio/types.h>
/* IIO TODO LIST */
/*
* Provide means of adjusting timer accuracy.
* Currently assumes nano seconds.
*/
enum iio_chan_info_enum {
IIO_CHAN_INFO_RAW = 0,
IIO_CHAN_INFO_PROCESSED,
IIO_CHAN_INFO_SCALE,
IIO_CHAN_INFO_OFFSET,
IIO_CHAN_INFO_CALIBSCALE,
IIO_CHAN_INFO_CALIBBIAS,
IIO_CHAN_INFO_PEAK,
IIO_CHAN_INFO_PEAK_SCALE,
IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW,
IIO_CHAN_INFO_AVERAGE_RAW,
IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY,
IIO_CHAN_INFO_SAMP_FREQ,
IIO_CHAN_INFO_FREQUENCY,
IIO_CHAN_INFO_PHASE,
IIO_CHAN_INFO_HARDWAREGAIN,
IIO_CHAN_INFO_HYSTERESIS,
IIO_CHAN_INFO_INT_TIME,
};
enum iio_shared_by {
IIO_SEPARATE,
IIO_SHARED_BY_TYPE,
IIO_SHARED_BY_DIR,
IIO_SHARED_BY_ALL
};
enum iio_endian {
IIO_CPU,
IIO_BE,
IIO_LE,
};
struct iio_chan_spec;
struct iio_dev;
/**
* struct iio_chan_spec_ext_info - Extended channel info attribute
* @name: Info attribute name
* @shared: Whether this attribute is shared between all channels.
* @read: Read callback for this info attribute, may be NULL.
* @write: Write callback for this info attribute, may be NULL.
* @private: Data private to the driver.
*/
struct iio_chan_spec_ext_info {
const char *name;
enum iio_shared_by shared;
ssize_t (*read)(struct iio_dev *, uintptr_t private,
struct iio_chan_spec const *, char *buf);
ssize_t (*write)(struct iio_dev *, uintptr_t private,
struct iio_chan_spec const *, const char *buf,
size_t len);
uintptr_t private;
};
/**
* struct iio_enum - Enum channel info attribute
* @items: An array of strings.
* @num_items: Length of the item array.
* @set: Set callback function, may be NULL.
* @get: Get callback function, may be NULL.
*
* The iio_enum struct can be used to implement enum style channel attributes.
* Enum style attributes are those which have a set of strings which map to
* unsigned integer values. The IIO enum helper code takes care of mapping
* between value and string as well as generating a "_available" file which
* contains a list of all available items. The set callback will be called when
* the attribute is updated. The last parameter is the index to the newly
* activated item. The get callback will be used to query the currently active
* item and is supposed to return the index for it.
*/
struct iio_enum {
const char * const *items;
unsigned int num_items;
int (*set)(struct iio_dev *, const struct iio_chan_spec *, unsigned int);
int (*get)(struct iio_dev *, const struct iio_chan_spec *);
};
ssize_t iio_enum_available_read(struct iio_dev *indio_dev,
uintptr_t priv, const struct iio_chan_spec *chan, char *buf);
ssize_t iio_enum_read(struct iio_dev *indio_dev,
uintptr_t priv, const struct iio_chan_spec *chan, char *buf);
ssize_t iio_enum_write(struct iio_dev *indio_dev,
uintptr_t priv, const struct iio_chan_spec *chan, const char *buf,
size_t len);
/**
* IIO_ENUM() - Initialize enum extended channel attribute
* @_name: Attribute name
* @_shared: Whether the attribute is shared between all channels
* @_e: Pointer to an iio_enum struct
*
* This should usually be used together with IIO_ENUM_AVAILABLE()
*/
#define IIO_ENUM(_name, _shared, _e) \
{ \
.name = (_name), \
.shared = (_shared), \
.read = iio_enum_read, \
.write = iio_enum_write, \
.private = (uintptr_t)(_e), \
}
/**
* IIO_ENUM_AVAILABLE() - Initialize enum available extended channel attribute
* @_name: Attribute name ("_available" will be appended to the name)
* @_e: Pointer to an iio_enum struct
*
* Creates a read only attribute which lists all the available enum items in a
* space separated list. This should usually be used together with IIO_ENUM()
*/
#define IIO_ENUM_AVAILABLE(_name, _e) \
{ \
.name = (_name "_available"), \
.shared = IIO_SHARED_BY_TYPE, \
.read = iio_enum_available_read, \
.private = (uintptr_t)(_e), \
}
/**
* struct iio_event_spec - specification for a channel event
* @type: Type of the event
* @dir: Direction of the event
* @mask_separate: Bit mask of enum iio_event_info values. Attributes
* set in this mask will be registered per channel.
* @mask_shared_by_type: Bit mask of enum iio_event_info values. Attributes
* set in this mask will be shared by channel type.
* @mask_shared_by_dir: Bit mask of enum iio_event_info values. Attributes
* set in this mask will be shared by channel type and
* direction.
* @mask_shared_by_all: Bit mask of enum iio_event_info values. Attributes
* set in this mask will be shared by all channels.
*/
struct iio_event_spec {
enum iio_event_type type;
enum iio_event_direction dir;
unsigned long mask_separate;
unsigned long mask_shared_by_type;
unsigned long mask_shared_by_dir;
unsigned long mask_shared_by_all;
};
/**
* struct iio_chan_spec - specification of a single channel
* @type: What type of measurement is the channel making.
* @channel: What number do we wish to assign the channel.
* @channel2: If there is a second number for a differential
* channel then this is it. If modified is set then the
* value here specifies the modifier.
* @address: Driver specific identifier.
* @scan_index: Monotonic index to give ordering in scans when read
* from a buffer.
* @scan_type: Sign: 's' or 'u' to specify signed or unsigned
* realbits: Number of valid bits of data
* storage_bits: Realbits + padding
* shift: Shift right by this before masking out
* realbits.
* endianness: little or big endian
* @info_mask_separate: What information is to be exported that is specific to
* this channel.
* @info_mask_shared_by_type: What information is to be exported that is shared
* by all channels of the same type.
* @info_mask_shared_by_dir: What information is to be exported that is shared
* by all channels of the same direction.
* @info_mask_shared_by_all: What information is to be exported that is shared
* by all channels.
* @event_mask: What events can this channel produce.
* @event_spec: Array of events which should be registered for this
* channel.
* @num_event_specs: Size of the event_spec array.
* @ext_info: Array of extended info attributes for this channel.
* The array is NULL terminated, the last element should
* have its name field set to NULL.
* @extend_name: Allows labeling of channel attributes with an
* informative name. Note this has no effect codes etc,
* unlike modifiers.
* @datasheet_name: A name used in in-kernel mapping of channels. It should
* correspond to the first name that the channel is referred
* to by in the datasheet (e.g. IND), or the nearest
* possible compound name (e.g. IND-INC).
* @modified: Does a modifier apply to this channel. What these are
* depends on the channel type. Modifier is set in
* channel2. Examples are IIO_MOD_X for axial sensors about
* the 'x' axis.
* @indexed: Specify the channel has a numerical index. If not,
* the channel index number will be suppressed for sysfs
* attributes but not for event codes.
* @output: Channel is output.
* @differential: Channel is differential.
*/
struct iio_chan_spec {
enum iio_chan_type type;
int channel;
int channel2;
unsigned long address;
int scan_index;
struct {
char sign;
u8 realbits;
u8 storagebits;
u8 shift;
enum iio_endian endianness;
} scan_type;
long info_mask_separate;
long info_mask_shared_by_type;
long info_mask_shared_by_dir;
long info_mask_shared_by_all;
long event_mask;
const struct iio_event_spec *event_spec;
unsigned int num_event_specs;
const struct iio_chan_spec_ext_info *ext_info;
const char *extend_name;
const char *datasheet_name;
unsigned modified:1;
unsigned indexed:1;
unsigned output:1;
unsigned differential:1;
};
/**
* iio_channel_has_info() - Checks whether a channel supports a info attribute
* @chan: The channel to be queried
* @type: Type of the info attribute to be checked
*
* Returns true if the channels supports reporting values for the given info
* attribute type, false otherwise.
*/
static inline bool iio_channel_has_info(const struct iio_chan_spec *chan,
enum iio_chan_info_enum type)
{
return (chan->info_mask_separate & BIT(type)) |
(chan->info_mask_shared_by_type & BIT(type)) |
(chan->info_mask_shared_by_dir & BIT(type)) |
(chan->info_mask_shared_by_all & BIT(type));
}
#define IIO_ST(si, rb, sb, sh) \
{ .sign = si, .realbits = rb, .storagebits = sb, .shift = sh }
#define IIO_CHAN_SOFT_TIMESTAMP(_si) \
{ .type = IIO_TIMESTAMP, .channel = -1, \
.scan_index = _si, .scan_type = IIO_ST('s', 64, 64, 0) }
/**
* iio_get_time_ns() - utility function to get a time stamp for events etc
**/
static inline s64 iio_get_time_ns(void)
{
struct timespec ts;
/*
* calls getnstimeofday.
* If hrtimers then up to ns accurate, if not microsecond.
*/
ktime_get_real_ts(&ts);
return timespec_to_ns(&ts);
}
/* Device operating modes */
#define INDIO_DIRECT_MODE 0x01
#define INDIO_BUFFER_TRIGGERED 0x02
#define INDIO_BUFFER_HARDWARE 0x08
#define INDIO_ALL_BUFFER_MODES \
(INDIO_BUFFER_TRIGGERED | INDIO_BUFFER_HARDWARE)
struct iio_trigger; /* forward declaration */
struct iio_dev;
/**
* struct iio_info - constant information about device
* @driver_module: module structure used to ensure correct
* ownership of chrdevs etc
* @event_attrs: event control attributes
* @attrs: general purpose device attributes
* @read_raw: function to request a value from the device.
* mask specifies which value. Note 0 means a reading of
* the channel in question. Return value will specify the
* type of value returned by the device. val and val2 will
* contain the elements making up the returned value.
* @write_raw: function to write a value to the device.
* Parameters are the same as for read_raw.
* @write_raw_get_fmt: callback function to query the expected
* format/precision. If not set by the driver, write_raw
* returns IIO_VAL_INT_PLUS_MICRO.
* @read_event_config: find out if the event is enabled.
* @write_event_config: set if the event is enabled.
* @read_event_value: read a value associated with the event. Meaning
* is event dependant. event_code specifies which event.
* @write_event_value: write the value associated with the event.
* Meaning is event dependent.
* @read_event_config_new: find out if the event is enabled. New style interface.
* @write_event_config_new: set if the event is enabled. New style interface.
* @read_event_value_new: read a configuration value associated with the event.
* New style interface.
* @write_event_value_new: write a configuration value for the event. New style
* interface.
* @validate_trigger: function to validate the trigger when the
* current trigger gets changed.
* @update_scan_mode: function to configure device and scan buffer when
* channels have changed
* @debugfs_reg_access: function to read or write register value of device
**/
struct iio_info {
struct module *driver_module;
struct attribute_group *event_attrs;
const struct attribute_group *attrs;
int (*read_raw)(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val,
int *val2,
long mask);
int (*write_raw)(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val,
int val2,
long mask);
int (*write_raw_get_fmt)(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
long mask);
int (*read_event_config)(struct iio_dev *indio_dev,
u64 event_code);
int (*write_event_config)(struct iio_dev *indio_dev,
u64 event_code,
int state);
int (*read_event_value)(struct iio_dev *indio_dev,
u64 event_code,
int *val);
int (*write_event_value)(struct iio_dev *indio_dev,
u64 event_code,
int val);
int (*read_event_config_new)(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
enum iio_event_direction dir);
int (*write_event_config_new)(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
enum iio_event_direction dir,
int state);
int (*read_event_value_new)(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
enum iio_event_direction dir,
enum iio_event_info info, int *val, int *val2);
int (*write_event_value_new)(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
enum iio_event_direction dir,
enum iio_event_info info, int val, int val2);
int (*validate_trigger)(struct iio_dev *indio_dev,
struct iio_trigger *trig);
int (*update_scan_mode)(struct iio_dev *indio_dev,
const unsigned long *scan_mask);
int (*debugfs_reg_access)(struct iio_dev *indio_dev,
unsigned reg, unsigned writeval,
unsigned *readval);
};
/**
* struct iio_buffer_setup_ops - buffer setup related callbacks
* @preenable: [DRIVER] function to run prior to marking buffer enabled
* @postenable: [DRIVER] function to run after marking buffer enabled
* @predisable: [DRIVER] function to run prior to marking buffer
* disabled
* @postdisable: [DRIVER] function to run after marking buffer disabled
* @validate_scan_mask: [DRIVER] function callback to check whether a given
* scan mask is valid for the device.
*/
struct iio_buffer_setup_ops {
int (*preenable)(struct iio_dev *);
int (*postenable)(struct iio_dev *);
int (*predisable)(struct iio_dev *);
int (*postdisable)(struct iio_dev *);
bool (*validate_scan_mask)(struct iio_dev *indio_dev,
const unsigned long *scan_mask);
};
/**
* struct iio_dev - industrial I/O device
* @id: [INTERN] used to identify device internally
* @modes: [DRIVER] operating modes supported by device
* @currentmode: [DRIVER] current operating mode
* @dev: [DRIVER] device structure, should be assigned a parent
* and owner
* @event_interface: [INTERN] event chrdevs associated with interrupt lines
* @buffer: [DRIVER] any buffer present
* @buffer_list: [INTERN] list of all buffers currently attached
* @scan_bytes: [INTERN] num bytes captured to be fed to buffer demux
* @mlock: [INTERN] lock used to prevent simultaneous device state
* changes
* @available_scan_masks: [DRIVER] optional array of allowed bitmasks
* @masklength: [INTERN] the length of the mask established from
* channels
* @active_scan_mask: [INTERN] union of all scan masks requested by buffers
* @scan_timestamp: [INTERN] set if any buffers have requested timestamp
* @scan_index_timestamp:[INTERN] cache of the index to the timestamp
* @trig: [INTERN] current device trigger (buffer modes)
* @pollfunc: [DRIVER] function run on trigger being received
* @channels: [DRIVER] channel specification structure table
* @num_channels: [DRIVER] number of channels specified in @channels.
* @channel_attr_list: [INTERN] keep track of automatically created channel
* attributes
* @chan_attr_group: [INTERN] group for all attrs in base directory
* @name: [DRIVER] name of the device.
* @info: [DRIVER] callbacks and constant info from driver
* @info_exist_lock: [INTERN] lock to prevent use during removal
* @setup_ops: [DRIVER] callbacks to call before and after buffer
* enable/disable
* @chrdev: [INTERN] associated character device
* @groups: [INTERN] attribute groups
* @groupcounter: [INTERN] index of next attribute group
* @flags: [INTERN] file ops related flags including busy flag.
* @debugfs_dentry: [INTERN] device specific debugfs dentry.
* @cached_reg_addr: [INTERN] cached register address for debugfs reads.
*/
struct iio_dev {
int id;
int modes;
int currentmode;
struct device dev;
struct iio_event_interface *event_interface;
struct iio_buffer *buffer;
struct list_head buffer_list;
int scan_bytes;
struct mutex mlock;
const unsigned long *available_scan_masks;
unsigned masklength;
const unsigned long *active_scan_mask;
bool scan_timestamp;
unsigned scan_index_timestamp;
struct iio_trigger *trig;
struct iio_poll_func *pollfunc;
struct iio_chan_spec const *channels;
int num_channels;
struct list_head channel_attr_list;
struct attribute_group chan_attr_group;
const char *name;
const struct iio_info *info;
struct mutex info_exist_lock;
const struct iio_buffer_setup_ops *setup_ops;
struct cdev chrdev;
#define IIO_MAX_GROUPS 6
const struct attribute_group *groups[IIO_MAX_GROUPS + 1];
int groupcounter;
unsigned long flags;
#if defined(CONFIG_DEBUG_FS)
struct dentry *debugfs_dentry;
unsigned cached_reg_addr;
#endif
};
/**
* iio_find_channel_from_si() - get channel from its scan index
* @indio_dev: device
* @si: scan index to match
*/
const struct iio_chan_spec
*iio_find_channel_from_si(struct iio_dev *indio_dev, int si);
/**
* iio_device_register() - register a device with the IIO subsystem
* @indio_dev: Device structure filled by the device driver
**/
int iio_device_register(struct iio_dev *indio_dev);
/**
* iio_device_unregister() - unregister a device from the IIO subsystem
* @indio_dev: Device structure representing the device.
**/
void iio_device_unregister(struct iio_dev *indio_dev);
/**
* iio_push_event() - try to add event to the list for userspace reading
* @indio_dev: IIO device structure
* @ev_code: What event
* @timestamp: When the event occurred
**/
int iio_push_event(struct iio_dev *indio_dev, u64 ev_code, s64 timestamp);
extern struct bus_type iio_bus_type;
/**
* iio_device_put() - reference counted deallocation of struct device
* @indio_dev: IIO device structure containing the device
**/
static inline void iio_device_put(struct iio_dev *indio_dev)
{
if (indio_dev)
put_device(&indio_dev->dev);
}
/**
* dev_to_iio_dev() - Get IIO device struct from a device struct
* @dev: The device embedded in the IIO device
*
* Note: The device must be a IIO device, otherwise the result is undefined.
*/
static inline struct iio_dev *dev_to_iio_dev(struct device *dev)
{
return container_of(dev, struct iio_dev, dev);
}
/**
* iio_device_get() - increment reference count for the device
* @indio_dev: IIO device structure
*
* Returns: The passed IIO device
**/
static inline struct iio_dev *iio_device_get(struct iio_dev *indio_dev)
{
return indio_dev ? dev_to_iio_dev(get_device(&indio_dev->dev)) : NULL;
}
/**
* iio_device_set_drvdata() - Set device driver data
* @indio_dev: IIO device structure
* @data: Driver specific data
*
* Allows to attach an arbitrary pointer to an IIO device, which can later be
* retrieved by iio_device_get_drvdata().
*/
static inline void iio_device_set_drvdata(struct iio_dev *indio_dev, void *data)
{
dev_set_drvdata(&indio_dev->dev, data);
}
/**
* iio_device_get_drvdata() - Get device driver data
* @indio_dev: IIO device structure
*
* Returns the data previously set with iio_device_set_drvdata()
*/
static inline void *iio_device_get_drvdata(struct iio_dev *indio_dev)
{
return dev_get_drvdata(&indio_dev->dev);
}
/* Can we make this smaller? */
#define IIO_ALIGN L1_CACHE_BYTES
/**
* iio_device_alloc() - allocate an iio_dev from a driver
* @sizeof_priv: Space to allocate for private structure.
**/
struct iio_dev *iio_device_alloc(int sizeof_priv);
static inline void *iio_priv(const struct iio_dev *indio_dev)
{
return (char *)indio_dev + ALIGN(sizeof(struct iio_dev), IIO_ALIGN);
}
static inline struct iio_dev *iio_priv_to_dev(void *priv)
{
return (struct iio_dev *)((char *)priv -
ALIGN(sizeof(struct iio_dev), IIO_ALIGN));
}
/**
* iio_device_free() - free an iio_dev from a driver
* @indio_dev: the iio_dev associated with the device
**/
void iio_device_free(struct iio_dev *indio_dev);
/**
* devm_iio_device_alloc - Resource-managed iio_device_alloc()
* @dev: Device to allocate iio_dev for
* @sizeof_priv: Space to allocate for private structure.
*
* Managed iio_device_alloc. iio_dev allocated with this function is
* automatically freed on driver detach.
*
* If an iio_dev allocated with this function needs to be freed separately,
* devm_iio_device_free() must be used.
*
* RETURNS:
* Pointer to allocated iio_dev on success, NULL on failure.
*/
struct iio_dev *devm_iio_device_alloc(struct device *dev, int sizeof_priv);
/**
* devm_iio_device_free - Resource-managed iio_device_free()
* @dev: Device this iio_dev belongs to
* @indio_dev: the iio_dev associated with the device
*
* Free iio_dev allocated with devm_iio_device_alloc().
*/
void devm_iio_device_free(struct device *dev, struct iio_dev *indio_dev);
/**
* devm_iio_trigger_alloc - Resource-managed iio_trigger_alloc()
* @dev: Device to allocate iio_trigger for
* @fmt: trigger name format. If it includes format
* specifiers, the additional arguments following
* format are formatted and inserted in the resulting
* string replacing their respective specifiers.
*
* Managed iio_trigger_alloc. iio_trigger allocated with this function is
* automatically freed on driver detach.
*
* If an iio_trigger allocated with this function needs to be freed separately,
* devm_iio_trigger_free() must be used.
*
* RETURNS:
* Pointer to allocated iio_trigger on success, NULL on failure.
*/
struct iio_trigger *devm_iio_trigger_alloc(struct device *dev,
const char *fmt, ...);
/**
* devm_iio_trigger_free - Resource-managed iio_trigger_free()
* @dev: Device this iio_dev belongs to
* @iio_trig: the iio_trigger associated with the device
*
* Free iio_trigger allocated with devm_iio_trigger_alloc().
*/
void devm_iio_trigger_free(struct device *dev, struct iio_trigger *iio_trig);
/**
* iio_buffer_enabled() - helper function to test if the buffer is enabled
* @indio_dev: IIO device structure for device
**/
static inline bool iio_buffer_enabled(struct iio_dev *indio_dev)
{
return indio_dev->currentmode
& (INDIO_BUFFER_TRIGGERED | INDIO_BUFFER_HARDWARE);
}
/**
* iio_get_debugfs_dentry() - helper function to get the debugfs_dentry
* @indio_dev: IIO device structure for device
**/
#if defined(CONFIG_DEBUG_FS)
static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev)
{
return indio_dev->debugfs_dentry;
}
#else
static inline struct dentry *iio_get_debugfs_dentry(struct iio_dev *indio_dev)
{
return NULL;
}
#endif
int iio_str_to_fixpoint(const char *str, int fract_mult, int *integer,
int *fract);
/**
* IIO_DEGREE_TO_RAD() - Convert degree to rad
* @deg: A value in degree
*
* Returns the given value converted from degree to rad
*/
#define IIO_DEGREE_TO_RAD(deg) (((deg) * 314159ULL + 9000000ULL) / 18000000ULL)
/**
* IIO_G_TO_M_S_2() - Convert g to meter / second**2
* @g: A value in g
*
* Returns the given value converted from g to meter / second**2
*/
#define IIO_G_TO_M_S_2(g) ((g) * 980665ULL / 100000ULL)
#endif /* _INDUSTRIAL_IO_H_ */
Reference in New Issue View Git Blame Copy Permalink