kernel-ark/include/asm-arm/arch-at91/hardware.h
Greg Ungerer feb4722552 [ARM] 4428/1: modify at91 includes to handle non-MMU at91x40 family
Modify the common at91 hardware support to deal with the non-MMU
at91x40 family. The base RAM (which is most likely not DRAM) is
set to the configured value. Virtual IO device mapping is set
to be 1 to 1 with the physical addresses.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-07-12 11:11:25 +01:00

91 lines
2.4 KiB
C

/*
* include/asm-arm/arch-at91/hardware.h
*
* Copyright (C) 2003 SAN People
* Copyright (C) 2003 ATMEL
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include <asm/sizes.h>
#if defined(CONFIG_ARCH_AT91RM9200)
#include <asm/arch/at91rm9200.h>
#elif defined(CONFIG_ARCH_AT91SAM9260)
#include <asm/arch/at91sam9260.h>
#elif defined(CONFIG_ARCH_AT91SAM9261)
#include <asm/arch/at91sam9261.h>
#elif defined(CONFIG_ARCH_AT91SAM9263)
#include <asm/arch/at91sam9263.h>
#elif defined(CONFIG_ARCH_AT91SAM9RL)
#include <asm/arch/at91sam9rl.h>
#elif defined(CONFIG_ARCH_AT91X40)
#include <asm/arch/at91x40.h>
#else
#error "Unsupported AT91 processor"
#endif
#ifdef CONFIG_MMU
/*
* Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
* to 0xFEF78000 .. 0xFF000000. (544Kb)
*/
#define AT91_IO_PHYS_BASE 0xFFF78000
#define AT91_IO_VIRT_BASE (0xFF000000 - AT91_IO_SIZE)
#else
/*
* Identity mapping for the non MMU case.
*/
#define AT91_IO_PHYS_BASE AT91_BASE_SYS
#define AT91_IO_VIRT_BASE AT91_IO_PHYS_BASE
#endif
#define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
/* Convert a physical IO address to virtual IO address */
#define AT91_IO_P2V(x) ((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
/*
* Virtual to Physical Address mapping for IO devices.
*/
#define AT91_VA_BASE_SYS AT91_IO_P2V(AT91_BASE_SYS)
#define AT91_VA_BASE_EMAC AT91_IO_P2V(AT91RM9200_BASE_EMAC)
/* Internal SRAM is mapped below the IO devices */
#define AT91_SRAM_MAX SZ_1M
#define AT91_VIRT_BASE (AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
/* Serial ports */
#define ATMEL_MAX_UART 7 /* 6 USART3's and one DBGU port (SAM9260) */
/* External Memory Map */
#define AT91_CHIPSELECT_0 0x10000000
#define AT91_CHIPSELECT_1 0x20000000
#define AT91_CHIPSELECT_2 0x30000000
#define AT91_CHIPSELECT_3 0x40000000
#define AT91_CHIPSELECT_4 0x50000000
#define AT91_CHIPSELECT_5 0x60000000
#define AT91_CHIPSELECT_6 0x70000000
#define AT91_CHIPSELECT_7 0x80000000
/* SDRAM */
#ifdef CONFIG_DRAM_BASE
#define AT91_SDRAM_BASE CONFIG_DRAM_BASE
#else
#define AT91_SDRAM_BASE AT91_CHIPSELECT_1
#endif
/* Clocks */
#define AT91_SLOW_CLOCK 32768 /* slow clock */
#endif