146a5e3c1e
This device is based on DM1000E, and BeBoB version 1 firmware is
installed.
$ cat /proc/asound/cards
0 [Pro ]: BeBoB - Mbox 2 Pro
DIGIDESIGN Mbox 2 Pro (id:1, rev:1),
GUID 00a07e0100a90000 at fw1.0, S400
$ cat /proc/asound/Pro/firewire/firmware
Manufacturer: bridgeCo
Protocol Ver: 1
Build Ver: 0
GUID: 0x00A07E0100A90000
Model ID: 0x01
Model Rev: 1
Firmware Date: 20071031
Firmware Time: 034402
Firmware ID: 0xA9
Firmware Ver: 16777215
Base Addr: 0x20080000
Max Size: 1572864
Loader Date: 20051207
Loader Time: 205554
With this patch, ALSA BeBoB driver can start packet streaming to/from
this model, while as a default, internal multiplexer of this model is
not initialized and generates no sound even if the driver transfers
any packets with PCM samples. To hear any sounds from this model,
userspace applications should be developed to set parameters to the
internal multiplexer. You can see raw information in FFADO website:
http://subversion.ffado.org/wiki/AvcModels/DigiDesignMboxPro2
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
123 lines
3.7 KiB
Plaintext
123 lines
3.7 KiB
Plaintext
menuconfig SND_FIREWIRE
|
|
bool "FireWire sound devices"
|
|
depends on FIREWIRE
|
|
default y
|
|
help
|
|
Support for IEEE-1394/FireWire/iLink sound devices.
|
|
|
|
if SND_FIREWIRE && FIREWIRE
|
|
|
|
config SND_FIREWIRE_LIB
|
|
tristate
|
|
select SND_PCM
|
|
select SND_RAWMIDI
|
|
|
|
config SND_DICE
|
|
tristate "DICE-based DACs support"
|
|
select SND_HWDEP
|
|
select SND_FIREWIRE_LIB
|
|
help
|
|
Say Y here to include support for many DACs based on the DICE
|
|
chip family (DICE-II/Jr/Mini) which TC Applied Technologies produces.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-dice.
|
|
|
|
config SND_OXFW
|
|
tristate "Oxford Semiconductor FW970/971 chipset support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for FireWire devices based on
|
|
Oxford Semiconductor FW970/971 chipset.
|
|
* Griffin Firewave
|
|
* LaCie Firewire Speakers
|
|
* Behringer F-Control Audio 202
|
|
* Mackie(Loud) Onyx-i series (former models)
|
|
* Mackie(Loud) Onyx Satellite
|
|
* Mackie(Loud) Tapco Link.Firewire
|
|
* Mackie(Loud) d.2 pro/d.4 pro
|
|
* Mackie(Loud) U.420/U.420d
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-oxfw.
|
|
|
|
config SND_ISIGHT
|
|
tristate "Apple iSight microphone"
|
|
select SND_FIREWIRE_LIB
|
|
help
|
|
Say Y here to include support for the front and rear microphones
|
|
of the Apple iSight web camera.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-isight.
|
|
|
|
config SND_SCS1X
|
|
tristate "Stanton Control System 1 MIDI"
|
|
select SND_FIREWIRE_LIB
|
|
help
|
|
Say Y here to include support for the MIDI ports of the Stanton
|
|
SCS.1d/SCS.1m DJ controllers. (SCS.1m audio is still handled
|
|
by FFADO.)
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-scs1x.
|
|
|
|
config SND_FIREWORKS
|
|
tristate "Echo Fireworks board module support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for FireWire devices based
|
|
on Echo Digital Audio Fireworks board:
|
|
* Mackie Onyx 400F/1200F
|
|
* Echo AudioFire12/8(until 2009 July)
|
|
* Echo AudioFire2/4/Pre8/8(since 2009 July)
|
|
* Echo Fireworks 8/HDMI
|
|
* Gibson Robot Interface Pack/GoldTop
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-fireworks.
|
|
|
|
config SND_BEBOB
|
|
tristate "BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for FireWire devices based
|
|
on BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware:
|
|
* Edirol FA-66/FA-101
|
|
* PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
|
|
* BridgeCo RDAudio1/Audio5
|
|
* Mackie Onyx 1220/1620/1640 (FireWire I/O Card)
|
|
* Mackie d.2 (FireWire Option)
|
|
* Stanton FinalScratch 2 (ScratchAmp)
|
|
* Tascam IF-FW/DM
|
|
* Behringer XENIX UFX 1204/1604
|
|
* Behringer Digital Mixer X32 series (X-UF Card)
|
|
* Apogee Rosetta 200/400 (X-FireWire card)
|
|
* Apogee DA/AD/DD-16X (X-FireWire card)
|
|
* Apogee Ensemble
|
|
* ESI QuataFire 610
|
|
* AcousticReality eARMasterOne
|
|
* CME MatrixKFW
|
|
* Phonic Helix Board 12 MkII/18 MkII/24 MkII
|
|
* Phonic Helix Board 12 Universal/18 Universal/24 Universal
|
|
* Lynx Aurora 8/16 (LT-FW)
|
|
* ICON FireXon
|
|
* PrismSound Orpheus/ADA-8XR
|
|
* TerraTec PHASE 24 FW/PHASE X24 FW/PHASE 88 Rack FW
|
|
* TerraTec EWS MIC2/EWS MIC8
|
|
* TerraTec Aureon 7.1 FireWire
|
|
* Yamaha GO44/GO46
|
|
* Focusrite Saffire/Saffire LE/SaffirePro10 IO/SaffirePro26 IO
|
|
* M-Audio FireWire410/AudioPhile/Solo
|
|
* M-Audio Ozonic/NRV10/ProfireLightBridge
|
|
* M-Audio FireWire 1814/ProjectMix IO
|
|
* Digidesign Mbox 2 Pro
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-bebob.
|
|
|
|
endif # SND_FIREWIRE
|