kernel-ark/arch/arm/mach-omap2
Jarkko Nikula 9833eff3d7 omap: i2c: Fix muxing for command line enabled bus
The commit b63128e812 broke the pin muxing
for I2C busses that are enabled from the kernel command line.

Fix this by defining the board registration function omap_register_i2c_bus
in common platform code as it was before but keep the muxing in architecture
dependent files.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-25 14:45:08 -08:00
..
include/mach AM35xx: Introduce am35xx.h file 2010-02-15 10:03:35 -08:00
board-2430sdp.c omap: musb: Pass board specific data from board file 2010-02-19 15:22:17 -08:00
board-3430sdp.c Merge branch 'pm-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus 2010-02-23 19:22:48 -08:00
board-3630sdp.c omap2/3/4: Fix omap2_map_common_io for multi-omap 2010-02-15 09:26:58 -08:00
board-4430sdp.c omap4: multi-omap: Allow build to work 2010-02-23 10:57:40 -08:00
board-am3517evm.c AM3517: Enable I2C-GPIO Expander driver support for AM3517EVM 2010-02-19 15:22:17 -08:00
board-apollon.c omap2/3/4: Fix omap2_map_common_io for multi-omap 2010-02-15 09:26:58 -08:00
board-cm-t35.c omap: musb: Pass board specific data from board file 2010-02-19 15:22:17 -08:00
board-devkit8000.c omap: musb: Pass board specific data from board file 2010-02-19 15:22:17 -08:00
board-generic.c omap2/3/4: Fix omap2_map_common_io for multi-omap 2010-02-15 09:26:58 -08:00
board-h4.c omap: convert boards to use physmap-flash 2010-02-15 10:03:32 -08:00
board-igep0020.c omap: musb: Pass board specific data from board file 2010-02-19 15:22:17 -08:00
board-ldp.c omap: musb: Pass board specific data from board file 2010-02-19 15:22:17 -08:00
board-n8x0.c omap2/3/4: Fix omap2_map_common_io for multi-omap 2010-02-15 09:26:58 -08:00
board-omap3beagle.c omap: musb: Pass board specific data from board file 2010-02-19 15:22:17 -08:00
board-omap3evm.c omap: musb: Pass board specific data from board file 2010-02-19 15:22:17 -08:00
board-omap3pandora.c omap: musb: Pass board specific data from board file 2010-02-19 15:22:17 -08:00
board-omap3touchbook.c omap: musb: Pass board specific data from board file 2010-02-19 15:22:17 -08:00
board-overo.c omap: musb: Pass board specific data from board file 2010-02-19 15:22:17 -08:00
board-rx51-peripherals.c omap: RX51: Remux to pull eMMC lines down when powering off 2010-02-15 10:03:34 -08:00
board-rx51-sdram.c omap3: rx51: Add SDRAM init 2009-11-22 10:24:33 -08:00
board-rx51.c Merge branch 'pm-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus 2010-02-23 19:22:48 -08:00
board-sdp-flash.c omap3: SDP: Introducing 'board-sdp-flash.c' for flash init 2010-02-15 10:03:33 -08:00
board-zoom2.c omap2/3/4: Fix omap2_map_common_io for multi-omap 2010-02-15 09:26:58 -08:00
board-zoom3.c omap: zoom3: enable ehci support 2010-02-17 14:09:23 -08:00
board-zoom-debugboard.c omap3: zoom: rename zoom2 name to generic zoom 2009-11-22 10:24:33 -08:00
board-zoom-peripherals.c omap: musb: Pass board specific data from board file 2010-02-19 15:22:17 -08:00
clkt2xxx_apll.c OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clkt2xxx_dpllcore.c OMAP2xxx clock: move the DPLL+CORE composite clock code into mach-omap2/clkt2xxx_dpllcore.c 2010-01-26 20:13:06 -07:00
clkt2xxx_osc.c OMAP2xxx clock: move osc_clk code into mach-omap2/clkt2xxx_osc.c 2010-01-28 18:13:49 -07:00
clkt2xxx_sys.c OMAP2xxx clock: move sys_clk code into mach-omap2/clkt2xxx_sys.c 2010-01-28 18:13:49 -07:00
clkt2xxx_virt_prcm_set.c OMAP2xxx clock: move the DVFS virtual clock code into mach-omap2/clkt2xxx_virt_prcm_set.c 2010-01-26 20:13:06 -07:00
clkt34xx_dpll3m2.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clkt_clksel.c OMAP clock: drop RATE_FIXED clock flag 2010-02-24 12:29:43 -07:00
clkt_dpll.c OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation 2010-02-24 12:15:03 -07:00
clock2xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock2xxx.h OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock3xxx_data.c OMAP3: clock: add capability to change rate of dpll4_m5_ck_3630 2010-02-24 12:29:43 -07:00
clock3xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock3xxx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx_data.c OMAP4: clock: Add dummy clock nodes for interface clocks 2010-02-24 17:45:17 -07:00
clock44xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock2420_data.c OMAP clock: drop RATE_FIXED clock flag 2010-02-24 12:29:43 -07:00
clock2430_data.c OMAP clock: drop RATE_FIXED clock flag 2010-02-24 12:29:43 -07:00
clock2430.c OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock3517.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock3517.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock_common_data.c OMAP3 clock: convert clock34xx.h to clock34xx_data.c 2009-12-11 16:12:15 -07:00
clock.c OMAP2+ clock: revise omap2_clk_{disable,enable}() 2010-02-24 17:45:16 -07:00
clock.h OMAP4: clock: Add dummy clock nodes for interface clocks 2010-02-24 17:45:17 -07:00
clockdomain.c OMAP2+ clock: revise omap2_clk_{disable,enable}() 2010-02-24 17:45:16 -07:00
clockdomains44xx.h ARM: OMAP4 clock domains : Add the missing Clock Domain Structure 2010-01-26 20:12:58 -07:00
clockdomains.h omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2 2010-02-15 09:27:01 -08:00
cm4xxx.c omap: Fix 44xx compile 2009-09-24 16:23:07 -07:00
cm44xx.h ARM: OMAP4: PM: Adds CM1/2 register defs for OMAP4 2009-12-11 17:00:45 -07:00
cm-regbits-24xx.h
cm-regbits-34xx.h OMAP3 clock: add support for 192Mhz DPLL4M2 output 2010-02-24 12:15:03 -07:00
cm-regbits-44xx.h OMAP4: PRCM: Define shift macros as n instead of 1 << n 2010-01-29 10:14:22 -07:00
cm.c OMAP clock/hwmod: fix off-by-one errors 2009-12-11 17:00:43 -07:00
cm.h OMAP2/3 clock: Extend find_idlest() to pass back idle state value 2010-02-24 12:05:54 -07:00
control.c omap2/3/4: ioremap omap_globals module 2010-02-23 10:57:40 -08:00
cpuidle34xx.c OMAP3: cpuidle: Add valid field into C-state parameter passing 2010-02-23 11:05:02 -08:00
devices.c omap4: Use irq line defines from irq-44xx.h 2010-02-23 15:29:08 -08:00
dpll3xxx.c OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation 2010-02-24 12:15:03 -07:00
emu.c omap2/3: Fix initcalls for multi-omap 2010-02-15 09:27:05 -08:00
gpmc-nand.c omap2/3/4: Introducing 'gpmc-nand.c' for GPMC specific NAND init 2010-02-15 10:03:33 -08:00
gpmc-onenand.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
gpmc-smc91x.c omap: use smc91x_platdata to setup smc91x 2009-12-11 16:16:33 -08:00
gpmc.c omap2/3/4: gpmc: kill compile warning 2010-02-15 10:03:33 -08:00
hsmmc.c omap_hsmmc: Allow for a shared VccQ 2010-02-15 10:03:34 -08:00
hsmmc.h omap_hsmmc: Allow for a shared VccQ 2010-02-15 10:03:34 -08:00
i2c.c omap: i2c: Fix muxing for command line enabled bus 2010-02-25 14:45:08 -08:00
id.c Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linus 2010-02-24 20:53:03 -08:00
io.c Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linus 2010-02-24 20:53:03 -08:00
iommu2.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
irq.c OMAP2/3: IRQ: ensure valid base address 2010-02-03 08:48:06 -08:00
Kconfig Add minimal support for DevKit8000 2010-02-19 15:22:17 -08:00
mailbox.c omap: mailbox: correct OMAP4 SIDLEMODE logic 2010-02-23 15:29:22 -08:00
Makefile Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linus 2010-02-24 20:53:03 -08:00
Makefile.boot
mcbsp.c McBSP: OMAP3: Add sidetone feature 2010-02-23 10:57:39 -08:00
mux34xx.c omap: Fix 3630 mux errors 2010-02-03 08:48:06 -08:00
mux34xx.h omap: mux: Add 36xx CBP package support 2009-12-11 16:16:33 -08:00
mux.c Merge branch 'omap-fixes-for-linus' into omap-for-linus 2010-02-17 14:08:58 -08:00
mux.h omap3: Replace ARCH_OMAP34XX with ARCH_OMAP3 2010-02-15 09:27:02 -08:00
omap3-iommu.c omap: iommu: reorganize 2009-11-22 10:24:32 -08:00
omap_hwmod_3xxx_data.c OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap_hwmod_2420_data.c OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap_hwmod_2430_data.c OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap_hwmod_common_data.c OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap_hwmod_common_data.h OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap_hwmod.c OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap-headsmp.S OMAP4: AuxCoreBoot registers only accessible in secure mode 2009-12-11 16:16:35 -08:00
omap-smp.c OMAP4: Remove the secondary wait loop 2009-12-11 16:16:35 -08:00
opp2xxx.h omap2/3: Multiboot compile fixes to compile in omap2 and omap3 2010-02-15 09:26:55 -08:00
opp2420_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
opp2430_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
pm24xx.c OMAP clockdomains: add usecounting for wakeup and sleep dependencies 2010-01-26 20:13:01 -07:00
pm34xx.c Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linus 2010-02-24 20:53:03 -08:00
pm-debug.c OMAP3 PM: Adding counters for power domain logic off and mem off during retention. 2010-02-24 12:05:50 -07:00
pm.h OMAP3: cpuidle: Add valid field into C-state parameter passing 2010-02-23 11:05:02 -08:00
powerdomain.c OMAP3 PM: Adding counters for power domain logic off and mem off during retention. 2010-02-24 12:05:50 -07:00
powerdomains24xx.h omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2 2010-02-15 09:27:01 -08:00
powerdomains34xx.h OMAP3 PM: Defining .pwrsts_logic_ret field for core power domain structure 2010-02-24 12:05:50 -07:00
powerdomains44xx.h ARM: OMAP4: PM: Add the Autogenerated OMAP4 specific power domain framework. 2010-01-26 20:12:52 -07:00
powerdomains.h OMAP2+ powerdomains/clockdomains: prepare for multi-OMAP configs 2010-01-29 10:14:23 -07:00
prcm-common.h ARM: OMAP4: PM: OMAP4 Power Domain Porting Related Clean-up. 2010-01-26 20:12:51 -07:00
prcm.c Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linus 2010-02-24 20:53:03 -08:00
prm44xx.h OMAP4: PRCM: Fix the base address for CHIRONSS reg defines 2010-01-20 13:35:27 -07:00
prm-regbits-24xx.h
prm-regbits-34xx.h OMAP3: PM: Enable IO-CHAIN wakeup 2009-11-11 14:42:28 -08:00
prm-regbits-44xx.h OMAP4: PRCM: Define shift macros as n instead of 1 << n 2010-01-29 10:14:22 -07:00
prm.h ARM: OMAP4: PM: OMAP4 Power Domain Porting Related Clean-up. 2010-01-26 20:12:51 -07:00
sdram-hynix-h8mbx00u0mer-0em.h omap3: zoom: Introduce zoom3 board support 2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdram-numonyx-m65kxxxxam.h omap3: SDRC: add timing data for Numonyx M65KxxxxAM 2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdrc2xxx.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdrc.c omap2/3/4: ioremap omap_globals module 2010-02-23 10:57:40 -08:00
sdrc.h OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx* 2009-12-11 16:16:00 -07:00
serial.c omap3/4: uart: fix full-fifo write abort 2010-02-23 10:57:40 -08:00
sleep24xx.S omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sleep34xx.S OMAP3: PM: Added support for L2 aux ctrl register save and restore 2010-02-23 11:05:07 -08:00
sram34xx.S OMAP3: SDRC: Place SDRC AC timing and MR changes in CORE DVFS SRAM code behind Kconfig 2009-12-11 17:00:42 -07:00
sram242x.S omap: Split OMAP2_IO_ADDRESS to L3 and L4 2009-10-19 15:25:31 -07:00
sram243x.S omap: Split OMAP2_IO_ADDRESS to L3 and L4 2009-10-19 15:25:31 -07:00
timer-gp.c OMAP4: clock: Remove clock hacks from timer-gp.c 2010-02-24 17:45:17 -07:00
timer-mpu.c omap4: Use irq line defines from irq-44xx.h 2010-02-23 15:29:08 -08:00
usb-ehci.c omap: mux: Replace omap_cfg_reg() with new style signal or gpio functions 2009-12-11 16:16:32 -08:00
usb-musb.c omap4: Use irq line defines from irq-44xx.h 2010-02-23 15:29:08 -08:00
usb-tusb6010.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00