kernel-ark/arch/arm/mach-s3c2412/mach-smdk2413.c
Lars-Peter Clausen e27c3c5c7e ARM: s3c24xx: Switch to common GPIO controlled UDC pullup implementation
Currently all boards using the s3c2410_udc driver use a GPIO to control the
state of the pullup, as a result the same code is reimplemented in each board
This patch changes these boards to use the common implementation for GPIO
controlled pullup in the UDC driver.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07 12:23:22 -08:00

161 lines
3.8 KiB
C

/* linux/arch/arm/mach-s3c2412/mach-smdk2413.c
*
* Copyright (c) 2006 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Thanks to Dimity Andric (TomTom) and Steven Ryu (Samsung) for the
* loans of SMDK2413 to work with.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/gpio.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <asm/hardware/iomd.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
//#include <asm/debug-ll.h>
#include <plat/regs-serial.h>
#include <mach/regs-gpio.h>
#include <mach/regs-lcd.h>
#include <mach/idle.h>
#include <plat/udc.h>
#include <plat/iic.h>
#include <mach/fb.h>
#include <plat/s3c2410.h>
#include <plat/s3c2412.h>
#include <plat/clock.h>
#include <plat/devs.h>
#include <plat/cpu.h>
#include <plat/common-smdk.h>
static struct map_desc smdk2413_iodesc[] __initdata = {
};
static struct s3c2410_uartcfg smdk2413_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x03,
.ufcon = 0x51,
},
/* IR port */
[2] = {
.hwport = 2,
.flags = 0,
.ucon = 0x3c5,
.ulcon = 0x43,
.ufcon = 0x51,
}
};
static struct s3c2410_udc_mach_info smdk2413_udc_cfg __initdata = {
.pullup_pin = S3C2410_GPF(2),
};
static struct platform_device *smdk2413_devices[] __initdata = {
&s3c_device_ohci,
&s3c_device_wdt,
&s3c_device_i2c0,
&s3c_device_iis,
&s3c_device_usbgadget,
};
static void __init smdk2413_fixup(struct machine_desc *desc,
struct tag *tags, char **cmdline,
struct meminfo *mi)
{
if (tags != phys_to_virt(S3C2410_SDRAM_PA + 0x100)) {
mi->nr_banks=1;
mi->bank[0].start = 0x30000000;
mi->bank[0].size = SZ_64M;
}
}
static void __init smdk2413_map_io(void)
{
s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
}
static void __init smdk2413_machine_init(void)
{ /* Turn off suspend on both USB ports, and switch the
* selectable USB port to USB device mode. */
s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST |
S3C2410_MISCCR_USBSUSPND0 |
S3C2410_MISCCR_USBSUSPND1, 0x0);
s3c24xx_udc_set_platdata(&smdk2413_udc_cfg);
s3c_i2c0_set_platdata(NULL);
platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices));
smdk_machine_init();
}
MACHINE_START(S3C2413, "S3C2413")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.boot_params = S3C2410_SDRAM_PA + 0x100,
.fixup = smdk2413_fixup,
.init_irq = s3c24xx_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.timer = &s3c24xx_timer,
MACHINE_END
MACHINE_START(SMDK2412, "SMDK2412")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.boot_params = S3C2410_SDRAM_PA + 0x100,
.fixup = smdk2413_fixup,
.init_irq = s3c24xx_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.timer = &s3c24xx_timer,
MACHINE_END
MACHINE_START(SMDK2413, "SMDK2413")
/* Maintainer: Ben Dooks <ben-linux@fluff.org> */
.boot_params = S3C2410_SDRAM_PA + 0x100,
.fixup = smdk2413_fixup,
.init_irq = s3c24xx_init_irq,
.map_io = smdk2413_map_io,
.init_machine = smdk2413_machine_init,
.timer = &s3c24xx_timer,
MACHINE_END