1a4f550a09
Description: ** support ARC1200/1201/1202 SATA RAID adapter, which is named ACB_ADAPTER_TYPE_B ** modify the arcmsr_pci_slot_reset function ** modify the arcmsr_pci_ers_disconnect_forepart function ** modify the arcmsr_pci_ers_need_reset_forepart function Signed-off-by: Nick Cheng <nick.cheng@areca.com.tw> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
72 lines
4.1 KiB
Plaintext
72 lines
4.1 KiB
Plaintext
**************************************************************************
|
|
** History
|
|
**
|
|
** REV# DATE NAME DESCRIPTION
|
|
** 1.00.00.00 3/31/2004 Erich Chen First release
|
|
** 1.10.00.04 7/28/2004 Erich Chen modify for ioctl
|
|
** 1.10.00.06 8/28/2004 Erich Chen modify for 2.6.x
|
|
** 1.10.00.08 9/28/2004 Erich Chen modify for x86_64
|
|
** 1.10.00.10 10/10/2004 Erich Chen bug fix for SMP & ioctl
|
|
** 1.20.00.00 11/29/2004 Erich Chen bug fix with arcmsr_bus_reset when PHY error
|
|
** 1.20.00.02 12/09/2004 Erich Chen bug fix with over 2T bytes RAID Volume
|
|
** 1.20.00.04 1/09/2005 Erich Chen fits for Debian linux kernel version 2.2.xx
|
|
** 1.20.00.05 2/20/2005 Erich Chen cleanly as look like a Linux driver at 2.6.x
|
|
** thanks for peoples kindness comment
|
|
** Kornel Wieliczek
|
|
** Christoph Hellwig
|
|
** Adrian Bunk
|
|
** Andrew Morton
|
|
** Christoph Hellwig
|
|
** James Bottomley
|
|
** Arjan van de Ven
|
|
** 1.20.00.06 3/12/2005 Erich Chen fix with arcmsr_pci_unmap_dma "unsigned long" cast,
|
|
** modify PCCB POOL allocated by "dma_alloc_coherent"
|
|
** (Kornel Wieliczek's comment)
|
|
** 1.20.00.07 3/23/2005 Erich Chen bug fix with arcmsr_scsi_host_template_init
|
|
** occur segmentation fault,
|
|
** if RAID adapter does not on PCI slot
|
|
** and modprobe/rmmod this driver twice.
|
|
** bug fix enormous stack usage (Adrian Bunk's comment)
|
|
** 1.20.00.08 6/23/2005 Erich Chen bug fix with abort command,
|
|
** in case of heavy loading when sata cable
|
|
** working on low quality connection
|
|
** 1.20.00.09 9/12/2005 Erich Chen bug fix with abort command handling, firmware version check
|
|
** and firmware update notify for hardware bug fix
|
|
** 1.20.00.10 9/23/2005 Erich Chen enhance sysfs function for change driver's max tag Q number.
|
|
** add DMA_64BIT_MASK for backward compatible with all 2.6.x
|
|
** add some useful message for abort command
|
|
** add ioctl code 'ARCMSR_IOCTL_FLUSH_ADAPTER_CACHE'
|
|
** customer can send this command for sync raid volume data
|
|
** 1.20.00.11 9/29/2005 Erich Chen by comment of Arjan van de Ven fix incorrect msleep redefine
|
|
** cast off sizeof(dma_addr_t) condition for 64bit pci_set_dma_mask
|
|
** 1.20.00.12 9/30/2005 Erich Chen bug fix with 64bit platform's ccbs using if over 4G system memory
|
|
** change 64bit pci_set_consistent_dma_mask into 32bit
|
|
** increcct adapter count if adapter initialize fail.
|
|
** miss edit at arcmsr_build_ccb....
|
|
** psge += sizeof(struct _SG64ENTRY *) =>
|
|
** psge += sizeof(struct _SG64ENTRY)
|
|
** 64 bits sg entry would be incorrectly calculated
|
|
** thanks Kornel Wieliczek give me kindly notify
|
|
** and detail description
|
|
** 1.20.00.13 11/15/2005 Erich Chen scheduling pending ccb with FIFO
|
|
** change the architecture of arcmsr command queue list
|
|
** for linux standard list
|
|
** enable usage of pci message signal interrupt
|
|
** follow Randy.Danlup kindness suggestion cleanup this code
|
|
** 1.20.00.14 05/02/2007 Erich Chen & Nick Cheng
|
|
** 1.implement PCI-Express error recovery function and AER capability
|
|
** 2.implement the selection of ARCMSR_MAX_XFER_SECTORS_B=4096
|
|
** if firmware version is newer than 1.42
|
|
** 3.modify arcmsr_iop_reset to improve the ability
|
|
** 4.modify the ISR, arcmsr_interrupt routine,to prevent the
|
|
** inconsistency with sg_mod driver if application directly calls
|
|
** the arcmsr driver w/o passing through scsi mid layer
|
|
** specially thanks to Yanmin Zhang's openhanded help about AER
|
|
** 1.20.00.15 08/30/2007 Erich Chen & Nick Cheng
|
|
** 1. support ARC1200/1201/1202 SATA RAID adapter, which is named
|
|
** ACB_ADAPTER_TYPE_B
|
|
** 2. modify the arcmsr_pci_slot_reset function
|
|
** 3. modify the arcmsr_pci_ers_disconnect_forepart function
|
|
** 4. modify the arcmsr_pci_ers_need_reset_forepart function
|
|
**************************************************************************
|