kernel-ark/drivers/message/i2o
Salyzyn, Mark 9638d89a75 [SCSI] I2O: move pci_request_regions() just behind pci_enable_device()
The problem in dpt_i2o could be the pci config space accesses it
triggers as it loads, dangerous to do if there is any I/O activity going
on in the other driver (probable if a boot driver I guess).

I approve this patch to dpt_i2o.c, and am applying it to the Adaptec
branch of the driver.

Thanks for the investigation Ryoji.

---

In linux 2.6.15, data transfer does hang when both dpt_i2o
and i2o_block drivers are loaded.
It seems that location of pci_request_regions() are wrong.
I moved it just behind pci_enable_device() like other drivers,
and it becomes fine.

Signed-off-by: Ryoji Kamei <kamei@miraclelinux.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-01-14 10:54:54 -06:00
..
bus-osm.c
config-osm.c
core.h
debug.c
device.c [PATCH] I2O: Lindent run 2006-01-06 08:33:54 -08:00
driver.c
exec-osm.c [PATCH] I2O: Lindent run 2006-01-06 08:33:54 -08:00
i2o_block.c [PATCH] Add block_device_operations.getgeo block device method 2006-01-08 20:13:54 -08:00
i2o_block.h
i2o_config.c
i2o_lan.h [PATCH] I2O: Lindent run 2006-01-06 08:33:54 -08:00
i2o_proc.c
i2o_scsi.c
iop.c
Kconfig
Makefile
pci.c [SCSI] I2O: move pci_request_regions() just behind pci_enable_device() 2006-01-14 10:54:54 -06:00
README
README.ioctl spelling: s/retreive/retrieve/ 2006-01-10 00:10:13 +01:00

	Linux I2O Support	(c) Copyright 1999 Red Hat Software
					and others.

	This program is free software; you can redistribute it and/or
	modify it under the terms of the GNU General Public License
	as published by the Free Software Foundation; either version
	2 of the License, or (at your option) any later version.

AUTHORS (so far)

Alan Cox, Building Number Three Ltd.
	Core code, SCSI and Block OSMs

Steve Ralston, LSI Logic Corp.
	Debugging SCSI and Block OSM

Deepak Saxena, Intel Corp.
	Various core/block extensions
	/proc interface, bug fixes
	Ioctl interfaces for control
	Debugging LAN OSM

Philip Rumpf
	Fixed assorted dumb SMP locking bugs

Juha Sievanen, University of Helsinki Finland
	LAN OSM code
	/proc interface to LAN class
	Bug fixes
	Core code extensions

Auvo Häkkinen, University of Helsinki Finland
	LAN OSM code
	/Proc interface to LAN class
	Bug fixes
	Core code extensions

Taneli Vähäkangas, University of Helsinki Finland
	Fixes to i2o_config

CREDITS

	This work was made possible by 

Red Hat Software
	Funding for the Building #3 part of the project

Symbios Logic (Now LSI)
	Host adapters, hints, known to work platforms when I hit
	compatibility problems

BoxHill Corporation
	Loan of initial FibreChannel disk array used for development work.

European Comission
	Funding the work done by the University of Helsinki

SysKonnect
        Loan of FDDI and Gigabit Ethernet cards

ASUSTeK
        Loan of I2O motherboard 

STATUS:

o	The core setup works within limits.
o	The scsi layer seems to almost work. 
           I'm still chasing down the hang bug.
o	The block OSM is mostly functional
o	LAN OSM works with FDDI and Ethernet cards.

TO DO:

General:
o	Provide hidden address space if asked
o	Long term message flow control
o	PCI IOP's without interrupts are not supported yet
o	Push FAIL handling into the core
o	DDM control interfaces for module load etc
o       Add I2O 2.0 support (Deffered to 2.5 kernel)

Block:
o	Multiple major numbers
o	Read ahead and cache handling stuff. Talk to Ingo and people
o	Power management
o	Finish Media changers

SCSI:
o	Find the right way to associate drives/luns/busses

Lan:	
o	Performance tuning
o	Test Fibre Channel code

Tape:
o	Anyone seen anything implementing this ?
           (D.S: Will attempt to do so if spare cycles permit)