davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
95826a3799
kernel-ark/sound/soc/samsung/s3c24xx-i2s.c
Arnd Bergmann 9bdca822cb ASoC: samsung: pass filter function as pointer 
As we are now passing the filter data as pointers to the drivers,
we can take the final step and also pass the filter function the
same way. I'm keeping this change separate, as there it's less
obvious that this is a net win.

Upsides of this are:

- The ASoC drivers are completely independent from the DMA engine
  implementation, which simplifies the Kconfig logic and in theory
  allows the same sound drivers to be built in a kernel that supports
  different kinds of dmaengine drivers.

- Consistency with other subsystems and drivers

On the other hand, we have a few downsides:

- The s3c24xx-dma driver now needs to be built-in for the ac97 platform
  device to be instantiated on s3c2440.

- samsung_dmaengine_pcm_config cannot be marked 'const' any more
  because the filter function pointer needs to be set at runtime.
  This is safe as long we don't have multiple different DMA engines
  in thet same system at runtime, but is nonetheless ugly.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-11-21 13:27:22 +00:00

506 lines
13 KiB
C
Raw Blame History

/*
* s3c24xx-i2s.c -- ALSA Soc Audio Layer
*
* (c) 2006 Wolfson Microelectronics PLC.
* Graeme Gregory graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
*
* Copyright 2004-2005 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/module.h>
#include <sound/soc.h>
#include <sound/pcm_params.h>
#include <mach/gpio-samsung.h>
#include <plat/gpio-cfg.h>
#include "regs-iis.h"
#include "dma.h"
#include "s3c24xx-i2s.h"
#include <linux/platform_data/asoc-s3c.h>
static struct s3c_dma_params s3c24xx_i2s_pcm_stereo_out = {
.ch_name = "tx",
.dma_size = 2,
};
static struct s3c_dma_params s3c24xx_i2s_pcm_stereo_in = {
.ch_name = "rx",
.dma_size = 2,
};
struct s3c24xx_i2s_info {
void __iomem *regs;
struct clk *iis_clk;
u32 iiscon;
u32 iismod;
u32 iisfcon;
u32 iispsr;
};
static struct s3c24xx_i2s_info s3c24xx_i2s;
static void s3c24xx_snd_txctrl(int on)
{
u32 iisfcon;
u32 iiscon;
u32 iismod;
pr_debug("Entered %s\n", __func__);
iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON);
iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
pr_debug("r: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
if (on) {
iisfcon |= S3C2410_IISFCON_TXDMA | S3C2410_IISFCON_TXENABLE;
iiscon |= S3C2410_IISCON_TXDMAEN | S3C2410_IISCON_IISEN;
iiscon &= ~S3C2410_IISCON_TXIDLE;
iismod |= S3C2410_IISMOD_TXMODE;
writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON);
} else {
/* note, we have to disable the FIFOs otherwise bad things
* seem to happen when the DMA stops. According to the
* Samsung supplied kernel, this should allow the DMA
* engine and FIFOs to reset. If this isn't allowed, the
* DMA engine will simply freeze randomly.
*/
iisfcon &= ~S3C2410_IISFCON_TXENABLE;
iisfcon &= ~S3C2410_IISFCON_TXDMA;
iiscon |= S3C2410_IISCON_TXIDLE;
iiscon &= ~S3C2410_IISCON_TXDMAEN;
iismod &= ~S3C2410_IISMOD_TXMODE;
writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON);
writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
}
pr_debug("w: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
}
static void s3c24xx_snd_rxctrl(int on)
{
u32 iisfcon;
u32 iiscon;
u32 iismod;
pr_debug("Entered %s\n", __func__);
iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON);
iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
pr_debug("r: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
if (on) {
iisfcon |= S3C2410_IISFCON_RXDMA | S3C2410_IISFCON_RXENABLE;
iiscon |= S3C2410_IISCON_RXDMAEN | S3C2410_IISCON_IISEN;
iiscon &= ~S3C2410_IISCON_RXIDLE;
iismod |= S3C2410_IISMOD_RXMODE;
writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON);
} else {
/* note, we have to disable the FIFOs otherwise bad things
* seem to happen when the DMA stops. According to the
* Samsung supplied kernel, this should allow the DMA
* engine and FIFOs to reset. If this isn't allowed, the
* DMA engine will simply freeze randomly.
*/
iisfcon &= ~S3C2410_IISFCON_RXENABLE;
iisfcon &= ~S3C2410_IISFCON_RXDMA;
iiscon |= S3C2410_IISCON_RXIDLE;
iiscon &= ~S3C2410_IISCON_RXDMAEN;
iismod &= ~S3C2410_IISMOD_RXMODE;
writel(iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
writel(iiscon, s3c24xx_i2s.regs + S3C2410_IISCON);
writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
}
pr_debug("w: IISCON: %x IISMOD: %x IISFCON: %x\n", iiscon, iismod, iisfcon);
}
/*
* Wait for the LR signal to allow synchronisation to the L/R clock
* from the codec. May only be needed for slave mode.
*/
static int s3c24xx_snd_lrsync(void)
{
u32 iiscon;
int timeout = 50; /* 5ms */
pr_debug("Entered %s\n", __func__);
while (1) {
iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
if (iiscon & S3C2410_IISCON_LRINDEX)
break;
if (!timeout--)
return -ETIMEDOUT;
udelay(100);
}
return 0;
}
/*
* Check whether CPU is the master or slave
*/
static inline int s3c24xx_snd_is_clkmaster(void)
{
pr_debug("Entered %s\n", __func__);
return (readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & S3C2410_IISMOD_SLAVE) ? 0:1;
}
/*
* Set S3C24xx I2S DAI format
*/
static int s3c24xx_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
unsigned int fmt)
{
u32 iismod;
pr_debug("Entered %s\n", __func__);
iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
pr_debug("hw_params r: IISMOD: %x \n", iismod);
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM:
iismod |= S3C2410_IISMOD_SLAVE;
break;
case SND_SOC_DAIFMT_CBS_CFS:
iismod &= ~S3C2410_IISMOD_SLAVE;
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_LEFT_J:
iismod |= S3C2410_IISMOD_MSB;
break;
case SND_SOC_DAIFMT_I2S:
iismod &= ~S3C2410_IISMOD_MSB;
break;
default:
return -EINVAL;
}
writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
pr_debug("hw_params w: IISMOD: %x \n", iismod);
return 0;
}
static int s3c24xx_i2s_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct snd_dmaengine_dai_dma_data *dma_data;
u32 iismod;
pr_debug("Entered %s\n", __func__);
dma_data = snd_soc_dai_get_dma_data(dai, substream);
/* Working copies of register */
iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
pr_debug("hw_params r: IISMOD: %x\n", iismod);
switch (params_width(params)) {
case 8:
iismod &= ~S3C2410_IISMOD_16BIT;
dma_data->addr_width = 1;
break;
case 16:
iismod |= S3C2410_IISMOD_16BIT;
dma_data->addr_width = 2;
break;
default:
return -EINVAL;
}
writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
pr_debug("hw_params w: IISMOD: %x\n", iismod);
return 0;
}
static int s3c24xx_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *dai)
{
int ret = 0;
pr_debug("Entered %s\n", __func__);
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
if (!s3c24xx_snd_is_clkmaster()) {
ret = s3c24xx_snd_lrsync();
if (ret)
goto exit_err;
}
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
s3c24xx_snd_rxctrl(1);
else
s3c24xx_snd_txctrl(1);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE)
s3c24xx_snd_rxctrl(0);
else
s3c24xx_snd_txctrl(0);
break;
default:
ret = -EINVAL;
break;
}
exit_err:
return ret;
}
/*
* Set S3C24xx Clock source
*/
static int s3c24xx_i2s_set_sysclk(struct snd_soc_dai *cpu_dai,
int clk_id, unsigned int freq, int dir)
{
u32 iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
pr_debug("Entered %s\n", __func__);
iismod &= ~S3C2440_IISMOD_MPLL;
switch (clk_id) {
case S3C24XX_CLKSRC_PCLK:
break;
case S3C24XX_CLKSRC_MPLL:
iismod |= S3C2440_IISMOD_MPLL;
break;
default:
return -EINVAL;
}
writel(iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
return 0;
}
/*
* Set S3C24xx Clock dividers
*/
static int s3c24xx_i2s_set_clkdiv(struct snd_soc_dai *cpu_dai,
int div_id, int div)
{
u32 reg;
pr_debug("Entered %s\n", __func__);
switch (div_id) {
case S3C24XX_DIV_BCLK:
reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~S3C2410_IISMOD_FS_MASK;
writel(reg | div, s3c24xx_i2s.regs + S3C2410_IISMOD);
break;
case S3C24XX_DIV_MCLK:
reg = readl(s3c24xx_i2s.regs + S3C2410_IISMOD) & ~(S3C2410_IISMOD_384FS);
writel(reg | div, s3c24xx_i2s.regs + S3C2410_IISMOD);
break;
case S3C24XX_DIV_PRESCALER:
writel(div, s3c24xx_i2s.regs + S3C2410_IISPSR);
reg = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
writel(reg | S3C2410_IISCON_PSCEN, s3c24xx_i2s.regs + S3C2410_IISCON);
break;
default:
return -EINVAL;
}
return 0;
}
/*
* To avoid duplicating clock code, allow machine driver to
* get the clockrate from here.
*/
u32 s3c24xx_i2s_get_clockrate(void)
{
return clk_get_rate(s3c24xx_i2s.iis_clk);
}
EXPORT_SYMBOL_GPL(s3c24xx_i2s_get_clockrate);
static int s3c24xx_i2s_probe(struct snd_soc_dai *dai)
{
pr_debug("Entered %s\n", __func__);
samsung_asoc_init_dma_data(dai, &s3c24xx_i2s_pcm_stereo_out,
&s3c24xx_i2s_pcm_stereo_in);
s3c24xx_i2s.iis_clk = devm_clk_get(dai->dev, "iis");
if (IS_ERR(s3c24xx_i2s.iis_clk)) {
pr_err("failed to get iis_clock\n");
return PTR_ERR(s3c24xx_i2s.iis_clk);
}
clk_prepare_enable(s3c24xx_i2s.iis_clk);
/* Configure the I2S pins (GPE0...GPE4) in correct mode */
s3c_gpio_cfgall_range(S3C2410_GPE(0), 5, S3C_GPIO_SFN(2),
S3C_GPIO_PULL_NONE);
writel(S3C2410_IISCON_IISEN, s3c24xx_i2s.regs + S3C2410_IISCON);
s3c24xx_snd_txctrl(0);
s3c24xx_snd_rxctrl(0);
return 0;
}
#ifdef CONFIG_PM
static int s3c24xx_i2s_suspend(struct snd_soc_dai *cpu_dai)
{
pr_debug("Entered %s\n", __func__);
s3c24xx_i2s.iiscon = readl(s3c24xx_i2s.regs + S3C2410_IISCON);
s3c24xx_i2s.iismod = readl(s3c24xx_i2s.regs + S3C2410_IISMOD);
s3c24xx_i2s.iisfcon = readl(s3c24xx_i2s.regs + S3C2410_IISFCON);
s3c24xx_i2s.iispsr = readl(s3c24xx_i2s.regs + S3C2410_IISPSR);
clk_disable_unprepare(s3c24xx_i2s.iis_clk);
return 0;
}
static int s3c24xx_i2s_resume(struct snd_soc_dai *cpu_dai)
{
pr_debug("Entered %s\n", __func__);
clk_prepare_enable(s3c24xx_i2s.iis_clk);
writel(s3c24xx_i2s.iiscon, s3c24xx_i2s.regs + S3C2410_IISCON);
writel(s3c24xx_i2s.iismod, s3c24xx_i2s.regs + S3C2410_IISMOD);
writel(s3c24xx_i2s.iisfcon, s3c24xx_i2s.regs + S3C2410_IISFCON);
writel(s3c24xx_i2s.iispsr, s3c24xx_i2s.regs + S3C2410_IISPSR);
return 0;
}
#else
#define s3c24xx_i2s_suspend NULL
#define s3c24xx_i2s_resume NULL
#endif
#define S3C24XX_I2S_RATES \
(SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \
SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
static const struct snd_soc_dai_ops s3c24xx_i2s_dai_ops = {
.trigger = s3c24xx_i2s_trigger,
.hw_params = s3c24xx_i2s_hw_params,
.set_fmt = s3c24xx_i2s_set_fmt,
.set_clkdiv = s3c24xx_i2s_set_clkdiv,
.set_sysclk = s3c24xx_i2s_set_sysclk,
};
static struct snd_soc_dai_driver s3c24xx_i2s_dai = {
.probe = s3c24xx_i2s_probe,
.suspend = s3c24xx_i2s_suspend,
.resume = s3c24xx_i2s_resume,
.playback = {
.channels_min = 2,
.channels_max = 2,
.rates = S3C24XX_I2S_RATES,
.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,},
.capture = {
.channels_min = 2,
.channels_max = 2,
.rates = S3C24XX_I2S_RATES,
.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE,},
.ops = &s3c24xx_i2s_dai_ops,
};
static const struct snd_soc_component_driver s3c24xx_i2s_component = {
.name = "s3c24xx-i2s",
};
static int s3c24xx_iis_dev_probe(struct platform_device *pdev)
{
int ret = 0;
struct resource *res;
struct s3c_audio_pdata *pdata = dev_get_platdata(&pdev->dev);
if (!pdata) {
dev_err(&pdev->dev, "missing platform data");
return -ENXIO;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "Can't get IO resource.\n");
return -ENOENT;
}
s3c24xx_i2s.regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(s3c24xx_i2s.regs))
return PTR_ERR(s3c24xx_i2s.regs);
s3c24xx_i2s_pcm_stereo_out.dma_addr = res->start + S3C2410_IISFIFO;
s3c24xx_i2s_pcm_stereo_out.slave = pdata->dma_playback;
s3c24xx_i2s_pcm_stereo_in.dma_addr = res->start + S3C2410_IISFIFO;
s3c24xx_i2s_pcm_stereo_in.slave = pdata->dma_capture;
ret = devm_snd_soc_register_component(&pdev->dev,
&s3c24xx_i2s_component, &s3c24xx_i2s_dai, 1);
if (ret) {
pr_err("failed to register the dai\n");
return ret;
}
ret = samsung_asoc_dma_platform_register(&pdev->dev,
pdata->dma_filter);
if (ret)
pr_err("failed to register the dma: %d\n", ret);
return ret;
}
static struct platform_driver s3c24xx_iis_driver = {
.probe = s3c24xx_iis_dev_probe,
.driver = {
.name = "s3c24xx-iis",
},
};
module_platform_driver(s3c24xx_iis_driver);
/* Module information */
MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
MODULE_DESCRIPTION("s3c24xx I2S SoC Interface");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:s3c24xx-iis");
Reference in New Issue View Git Blame Copy Permalink