kernel-ark/arch/arm
Rod Whitby 95053aec4d [ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards
This updates the defconfig for the ixp4xx machine in arch/arm/config
taking all the defaults, with the following additions:

1) Enable support for the nslu2, loft, gateway7001, wg302v2,
   dsmg600, and gtwx5715 boards.
2) Enable EABI, OABI, HOTPLUG and FW_LOADER.
3) Enable the RTC subsystem, with drivers for the RTC chips on the
   nslu2 (x1205) and nas100d/dsmg600 (pcf8563) boards.
4) Enable the LEDS subsystem to support the nslu2, nas100d and
   dsmg600 boards.  Enable the ixp4xx beeper driver.
5) Enable the USB subsystem, USB host driver support and USB mass
   storage support (required for boot disk on nslu2 board).
6) Enable the ATA subsystem, with drivers for the nas100d/dsmg600
   (pata_artop) and avila (ixp4xx_cf) boards.

Signed-off-by: Rod Whitby <rod@whitby.id.au>
Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-02-04 13:15:23 +00:00
..
boot Merge branch 'orion' into devel 2008-01-28 13:21:30 +00:00
common [ARM] remove duplicate includes 2008-01-26 14:50:07 +00:00
configs [ARM] 4766/2: ixp4xx: Update ixp4xx_defconfig, enabling all supported boards 2008-02-04 13:15:23 +00:00
kernel all archs: consolidate init and exit sections in vmlinux.lds.h 2008-01-28 23:21:17 +01:00
lib
mach-aaec2000 [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-at91 Suspend: Introduce begin() and end() callbacks 2008-02-01 18:30:56 -05:00
mach-clps711x [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-clps7500 [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-davinci clockevents: fix resume logic 2007-07-21 17:49:15 -07:00
mach-ebsa110 [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-ep93xx Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', 's3c2410', 'sa1100' and 'vfp' into devel 2008-01-28 13:21:21 +00:00
mach-footbridge [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-h720x [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-imx Remove references to "make dep" 2008-01-28 23:22:13 +01:00
mach-integrator Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', 's3c2410', 'sa1100' and 'vfp' into devel 2008-01-28 13:21:21 +00:00
mach-iop13xx some kmalloc/memset ->kzalloc (tree wide) 2007-07-19 10:04:50 -07:00
mach-iop32x [ARM] 4770/1: GLAN Tank: correct physmap_flash_data width field 2008-01-26 14:58:55 +00:00
mach-iop33x
mach-ixp4xx Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', 's3c2410', 'sa1100' and 'vfp' into devel 2008-01-28 13:21:21 +00:00
mach-ixp23xx [ARM] remove duplicate includes 2008-01-26 14:50:07 +00:00
mach-ixp2000 [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-ks8695 Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', 's3c2410', 'sa1100' and 'vfp' into devel 2008-01-28 13:21:21 +00:00
mach-l7200
mach-lh7a40x [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-msm [ARM] msm: dma support for MSM7X00A 2008-01-26 14:39:14 +00:00
mach-mx3 [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-netx Remove references to "make dep" 2008-01-28 23:22:13 +01:00
mach-ns9xxx [ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32 2007-10-12 23:43:41 +01:00
mach-omap1 Merge branch 'pxa-plat' into devel 2008-01-28 13:21:38 +00:00
mach-omap2 Merge branch 'pxa-plat' into devel 2008-01-28 13:21:38 +00:00
mach-orion [ARM] Orion: implement power-off method for QNAP TS-109/209 2008-01-26 15:04:04 +00:00
mach-pnx4008 [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-pxa USB: tosa_udc_use_gpio_vbus.patch 2008-02-01 14:34:59 -08:00
mach-realview [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-rpc [ARM] rpc: convert an outb() to writeb() 2007-07-20 21:29:39 +01:00
mach-s3c2400
mach-s3c2410 Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', 's3c2410', 'sa1100' and 'vfp' into devel 2008-01-28 13:21:21 +00:00
mach-s3c2412 [ARM] 4791/1: S3C2412: Make fclk a parent of msysclk 2008-01-28 13:20:52 +00:00
mach-s3c2440 [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code 2008-01-28 13:20:52 +00:00
mach-s3c2442 [ARM] 4794/1: S3C24XX: Comonise S3C2440 and S3C2442 clock code 2008-01-28 13:20:52 +00:00
mach-s3c2443 Driver core: change sysdev classes to use dynamic kobject names 2008-01-24 20:40:40 -08:00
mach-sa1100 Merge branches 'at91', 'ep93xx', 'iop', 'kprobes', 'ks8695', 'misc', 'msm', 's3c2410', 'sa1100' and 'vfp' into devel 2008-01-28 13:21:21 +00:00
mach-shark [ARM] Fix timer damage from d3d74453c3 2008-01-28 10:17:12 +00:00
mach-versatile
mm Merge branch 'orion' into devel 2008-01-28 13:21:30 +00:00
nwfpe Convert files to UTF-8 and some cleanups 2007-10-19 23:21:04 +02:00
oprofile Driver core: change sysdev classes to use dynamic kobject names 2008-01-24 20:40:40 -08:00
plat-iop [ARM] 4495/1: iop: combined watchdog timer driver for iop3xx and iop13xx 2007-07-20 09:35:42 +01:00
plat-mxc [ARM] 4461/1: MXC platform and i.MX31ADS core support 2007-07-22 15:44:46 +01:00
plat-omap Merge branch 'blk-end-request' of git://git.kernel.dk/linux-2.6-block 2008-01-29 08:51:32 +11:00
plat-s3c [ARM] 4518/1: S3C: Rename watchdog configuration options 2007-07-22 16:44:38 +01:00
plat-s3c24xx [ARM] 4795/1: S3C244X: Add armclk and setparent call 2008-01-28 13:20:52 +00:00
tools [ARM] Update mach-types 2008-01-26 14:47:48 +00:00
vfp [ARM] 4583/1: ARMv7: Add VFPv3 support 2008-01-26 14:41:28 +00:00
Kconfig Merge branch 'suspend' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 2008-02-02 14:29:57 +11:00
Kconfig-nommu [ARM] 4532/1: allow configuration of processor ID 2007-10-12 23:43:02 +01:00
Kconfig.debug [ARM] CONFIG_DEBUG_STACK_USAGE 2008-01-26 14:50:06 +00:00
Kconfig.instrumentation ARM kprobes: let's enable it 2008-01-26 15:25:17 +00:00
Makefile Merge branch 'orion' into devel 2008-01-28 13:21:30 +00:00