davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
94ca8e4852
kernel-ark/arch/x86/ia32/ia32entry.S
Gerd Hoffmann f3554f4bc6 preadv/pwritev: Add preadv and pwritev system calls. 
This patch adds preadv and pwritev system calls.  These syscalls are a
pretty straightforward combination of pread and readv (same for write).
They are quite useful for doing vectored I/O in threaded applications.
Using lseek+readv instead opens race windows you'll have to plug with
locking.

Other systems have such system calls too, for example NetBSD, check
here: http://www.daemon-systems.org/man/preadv.2.html

The application-visible interface provided by glibc should look like
this to be compatible to the existing implementations in the *BSD family:

  ssize_t preadv(int d, const struct iovec *iov, int iovcnt, off_t offset);
  ssize_t pwritev(int d, const struct iovec *iov, int iovcnt, off_t offset);

This prototype has one problem though: On 32bit archs is the (64bit)
offset argument unaligned, which the syscall ABI of several archs doesn't
allow to do.  At least s390 needs a wrapper in glibc to handle this.  As
we'll need a wrappers in glibc anyway I've decided to push problem to
glibc entriely and use a syscall prototype which works without
arch-specific wrappers inside the kernel: The offset argument is
explicitly splitted into two 32bit values.

The patch sports the actual system call implementation and the windup in
the x86 system call tables.  Other archs follow as separate patches.

Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <linux-api@vger.kernel.org>
Cc: <linux-arch@vger.kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:08 -07:00

834 lines
22 KiB
ArmAsm
Raw Blame History

/*
* Compatibility mode system call entry point for x86-64.
*
* Copyright 2000-2002 Andi Kleen, SuSE Labs.
*/
#include <asm/dwarf2.h>
#include <asm/calling.h>
#include <asm/asm-offsets.h>
#include <asm/current.h>
#include <asm/errno.h>
#include <asm/ia32_unistd.h>
#include <asm/thread_info.h>
#include <asm/segment.h>
#include <asm/irqflags.h>
#include <linux/linkage.h>
/* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */
#include <linux/elf-em.h>
#define AUDIT_ARCH_I386 (EM_386|__AUDIT_ARCH_LE)
#define __AUDIT_ARCH_LE 0x40000000
#ifndef CONFIG_AUDITSYSCALL
#define sysexit_audit int_ret_from_sys_call
#define sysretl_audit int_ret_from_sys_call
#endif
#define IA32_NR_syscalls ((ia32_syscall_end - ia32_sys_call_table)/8)
.macro IA32_ARG_FIXUP noebp=0
movl %edi,%r8d
.if \noebp
.else
movl %ebp,%r9d
.endif
xchg %ecx,%esi
movl %ebx,%edi
movl %edx,%edx /* zero extension */
.endm
/* clobbers %eax */
.macro CLEAR_RREGS _r9=rax
xorl %eax,%eax
movq %rax,R11(%rsp)
movq %rax,R10(%rsp)
movq %\_r9,R9(%rsp)
movq %rax,R8(%rsp)
.endm
/*
* Reload arg registers from stack in case ptrace changed them.
* We don't reload %eax because syscall_trace_enter() returned
* the value it wants us to use in the table lookup.
*/
.macro LOAD_ARGS32 offset, _r9=0
.if \_r9
movl \offset+16(%rsp),%r9d
.endif
movl \offset+40(%rsp),%ecx
movl \offset+48(%rsp),%edx
movl \offset+56(%rsp),%esi
movl \offset+64(%rsp),%edi
.endm
.macro CFI_STARTPROC32 simple
CFI_STARTPROC \simple
CFI_UNDEFINED r8
CFI_UNDEFINED r9
CFI_UNDEFINED r10
CFI_UNDEFINED r11
CFI_UNDEFINED r12
CFI_UNDEFINED r13
CFI_UNDEFINED r14
CFI_UNDEFINED r15
.endm
#ifdef CONFIG_PARAVIRT
ENTRY(native_usergs_sysret32)
swapgs
sysretl
ENDPROC(native_usergs_sysret32)
ENTRY(native_irq_enable_sysexit)
swapgs
sti
sysexit
ENDPROC(native_irq_enable_sysexit)
#endif
/*
* 32bit SYSENTER instruction entry.
*
* Arguments:
* %eax System call number.
* %ebx Arg1
* %ecx Arg2
* %edx Arg3
* %esi Arg4
* %edi Arg5
* %ebp user stack
* 0(%ebp) Arg6
*
* Interrupts off.
*
* This is purely a fast path. For anything complicated we use the int 0x80
* path below. Set up a complete hardware stack frame to share code
* with the int 0x80 path.
*/
ENTRY(ia32_sysenter_target)
CFI_STARTPROC32 simple
CFI_SIGNAL_FRAME
CFI_DEF_CFA rsp,0
CFI_REGISTER rsp,rbp
SWAPGS_UNSAFE_STACK
movq PER_CPU_VAR(kernel_stack), %rsp
addq $(KERNEL_STACK_OFFSET),%rsp
/*
* No need to follow this irqs on/off section: the syscall
* disabled irqs, here we enable it straight after entry:
*/
ENABLE_INTERRUPTS(CLBR_NONE)
movl %ebp,%ebp /* zero extension */
pushq $__USER32_DS
CFI_ADJUST_CFA_OFFSET 8
/*CFI_REL_OFFSET ss,0*/
pushq %rbp
CFI_ADJUST_CFA_OFFSET 8
CFI_REL_OFFSET rsp,0
pushfq
CFI_ADJUST_CFA_OFFSET 8
/*CFI_REL_OFFSET rflags,0*/
movl 8*3-THREAD_SIZE+TI_sysenter_return(%rsp), %r10d
CFI_REGISTER rip,r10
pushq $__USER32_CS
CFI_ADJUST_CFA_OFFSET 8
/*CFI_REL_OFFSET cs,0*/
movl %eax, %eax
pushq %r10
CFI_ADJUST_CFA_OFFSET 8
CFI_REL_OFFSET rip,0
pushq %rax
CFI_ADJUST_CFA_OFFSET 8
cld
SAVE_ARGS 0,0,1
/* no need to do an access_ok check here because rbp has been
32bit zero extended */
1: movl (%rbp),%ebp
.section __ex_table,"a"
.quad 1b,ia32_badarg
.previous
GET_THREAD_INFO(%r10)
orl $TS_COMPAT,TI_status(%r10)
testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
CFI_REMEMBER_STATE
jnz sysenter_tracesys
cmpl $(IA32_NR_syscalls-1),%eax
ja ia32_badsys
sysenter_do_call:
IA32_ARG_FIXUP
sysenter_dispatch:
call *ia32_sys_call_table(,%rax,8)
movq %rax,RAX-ARGOFFSET(%rsp)
GET_THREAD_INFO(%r10)
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
testl $_TIF_ALLWORK_MASK,TI_flags(%r10)
jnz sysexit_audit
sysexit_from_sys_call:
andl $~TS_COMPAT,TI_status(%r10)
/* clear IF, that popfq doesn't enable interrupts early */
andl $~0x200,EFLAGS-R11(%rsp)
movl RIP-R11(%rsp),%edx /* User %eip */
CFI_REGISTER rip,rdx
RESTORE_ARGS 1,24,1,1,1,1
popfq
CFI_ADJUST_CFA_OFFSET -8
/*CFI_RESTORE rflags*/
popq %rcx /* User %esp */
CFI_ADJUST_CFA_OFFSET -8
CFI_REGISTER rsp,rcx
TRACE_IRQS_ON
ENABLE_INTERRUPTS_SYSEXIT32
#ifdef CONFIG_AUDITSYSCALL
.macro auditsys_entry_common
movl %esi,%r9d /* 6th arg: 4th syscall arg */
movl %edx,%r8d /* 5th arg: 3rd syscall arg */
/* (already in %ecx) 4th arg: 2nd syscall arg */
movl %ebx,%edx /* 3rd arg: 1st syscall arg */
movl %eax,%esi /* 2nd arg: syscall number */
movl $AUDIT_ARCH_I386,%edi /* 1st arg: audit arch */
call audit_syscall_entry
movl RAX-ARGOFFSET(%rsp),%eax /* reload syscall number */
cmpl $(IA32_NR_syscalls-1),%eax
ja ia32_badsys
movl %ebx,%edi /* reload 1st syscall arg */
movl RCX-ARGOFFSET(%rsp),%esi /* reload 2nd syscall arg */
movl RDX-ARGOFFSET(%rsp),%edx /* reload 3rd syscall arg */
movl RSI-ARGOFFSET(%rsp),%ecx /* reload 4th syscall arg */
movl RDI-ARGOFFSET(%rsp),%r8d /* reload 5th syscall arg */
.endm
.macro auditsys_exit exit,ebpsave=RBP
testl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
jnz int_ret_from_sys_call
TRACE_IRQS_ON
sti
movl %eax,%esi /* second arg, syscall return value */
cmpl $0,%eax /* is it < 0? */
setl %al /* 1 if so, 0 if not */
movzbl %al,%edi /* zero-extend that into %edi */
inc %edi /* first arg, 0->1(AUDITSC_SUCCESS), 1->2(AUDITSC_FAILURE) */
call audit_syscall_exit
GET_THREAD_INFO(%r10)
movl RAX-ARGOFFSET(%rsp),%eax /* reload syscall return value */
movl \ebpsave-ARGOFFSET(%rsp),%ebp /* reload user register value */
movl $(_TIF_ALLWORK_MASK & ~_TIF_SYSCALL_AUDIT),%edi
cli
TRACE_IRQS_OFF
testl %edi,TI_flags(%r10)
jnz int_with_check
jmp \exit
.endm
sysenter_auditsys:
CFI_RESTORE_STATE
auditsys_entry_common
movl %ebp,%r9d /* reload 6th syscall arg */
jmp sysenter_dispatch
sysexit_audit:
auditsys_exit sysexit_from_sys_call
#endif
sysenter_tracesys:
#ifdef CONFIG_AUDITSYSCALL
testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
jz sysenter_auditsys
#endif
SAVE_REST
CLEAR_RREGS
movq $-ENOSYS,RAX(%rsp)/* ptrace can change this for a bad syscall */
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */
RESTORE_REST
cmpl $(IA32_NR_syscalls-1),%eax
ja int_ret_from_sys_call /* sysenter_tracesys has set RAX(%rsp) */
jmp sysenter_do_call
CFI_ENDPROC
ENDPROC(ia32_sysenter_target)
/*
* 32bit SYSCALL instruction entry.
*
* Arguments:
* %eax System call number.
* %ebx Arg1
* %ecx return EIP
* %edx Arg3
* %esi Arg4
* %edi Arg5
* %ebp Arg2 [note: not saved in the stack frame, should not be touched]
* %esp user stack
* 0(%esp) Arg6
*
* Interrupts off.
*
* This is purely a fast path. For anything complicated we use the int 0x80
* path below. Set up a complete hardware stack frame to share code
* with the int 0x80 path.
*/
ENTRY(ia32_cstar_target)
CFI_STARTPROC32 simple
CFI_SIGNAL_FRAME
CFI_DEF_CFA rsp,KERNEL_STACK_OFFSET
CFI_REGISTER rip,rcx
/*CFI_REGISTER rflags,r11*/
SWAPGS_UNSAFE_STACK
movl %esp,%r8d
CFI_REGISTER rsp,r8
movq PER_CPU_VAR(kernel_stack),%rsp
/*
* No need to follow this irqs on/off section: the syscall
* disabled irqs and here we enable it straight after entry:
*/
ENABLE_INTERRUPTS(CLBR_NONE)
SAVE_ARGS 8,1,1
movl %eax,%eax /* zero extension */
movq %rax,ORIG_RAX-ARGOFFSET(%rsp)
movq %rcx,RIP-ARGOFFSET(%rsp)
CFI_REL_OFFSET rip,RIP-ARGOFFSET
movq %rbp,RCX-ARGOFFSET(%rsp) /* this lies slightly to ptrace */
movl %ebp,%ecx
movq $__USER32_CS,CS-ARGOFFSET(%rsp)
movq $__USER32_DS,SS-ARGOFFSET(%rsp)
movq %r11,EFLAGS-ARGOFFSET(%rsp)
/*CFI_REL_OFFSET rflags,EFLAGS-ARGOFFSET*/
movq %r8,RSP-ARGOFFSET(%rsp)
CFI_REL_OFFSET rsp,RSP-ARGOFFSET
/* no need to do an access_ok check here because r8 has been
32bit zero extended */
/* hardware stack frame is complete now */
1: movl (%r8),%r9d
.section __ex_table,"a"
.quad 1b,ia32_badarg
.previous
GET_THREAD_INFO(%r10)
orl $TS_COMPAT,TI_status(%r10)
testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
CFI_REMEMBER_STATE
jnz cstar_tracesys
cmpl $IA32_NR_syscalls-1,%eax
ja ia32_badsys
cstar_do_call:
IA32_ARG_FIXUP 1
cstar_dispatch:
call *ia32_sys_call_table(,%rax,8)
movq %rax,RAX-ARGOFFSET(%rsp)
GET_THREAD_INFO(%r10)
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
testl $_TIF_ALLWORK_MASK,TI_flags(%r10)
jnz sysretl_audit
sysretl_from_sys_call:
andl $~TS_COMPAT,TI_status(%r10)
RESTORE_ARGS 1,-ARG_SKIP,1,1,1
movl RIP-ARGOFFSET(%rsp),%ecx
CFI_REGISTER rip,rcx
movl EFLAGS-ARGOFFSET(%rsp),%r11d
/*CFI_REGISTER rflags,r11*/
TRACE_IRQS_ON
movl RSP-ARGOFFSET(%rsp),%esp
CFI_RESTORE rsp
USERGS_SYSRET32
#ifdef CONFIG_AUDITSYSCALL
cstar_auditsys:
CFI_RESTORE_STATE
movl %r9d,R9-ARGOFFSET(%rsp) /* register to be clobbered by call */
auditsys_entry_common
movl R9-ARGOFFSET(%rsp),%r9d /* reload 6th syscall arg */
jmp cstar_dispatch
sysretl_audit:
auditsys_exit sysretl_from_sys_call, RCX /* user %ebp in RCX slot */
#endif
cstar_tracesys:
#ifdef CONFIG_AUDITSYSCALL
testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%r10)
jz cstar_auditsys
#endif
xchgl %r9d,%ebp
SAVE_REST
CLEAR_RREGS r9
movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
LOAD_ARGS32 ARGOFFSET, 1 /* reload args from stack in case ptrace changed it */
RESTORE_REST
xchgl %ebp,%r9d
cmpl $(IA32_NR_syscalls-1),%eax
ja int_ret_from_sys_call /* cstar_tracesys has set RAX(%rsp) */
jmp cstar_do_call
END(ia32_cstar_target)
ia32_badarg:
movq $-EFAULT,%rax
jmp ia32_sysret
CFI_ENDPROC
/*
* Emulated IA32 system calls via int 0x80.
*
* Arguments:
* %eax System call number.
* %ebx Arg1
* %ecx Arg2
* %edx Arg3
* %esi Arg4
* %edi Arg5
* %ebp Arg6 [note: not saved in the stack frame, should not be touched]
*
* Notes:
* Uses the same stack frame as the x86-64 version.
* All registers except %eax must be saved (but ptrace may violate that)
* Arguments are zero extended. For system calls that want sign extension and
* take long arguments a wrapper is needed. Most calls can just be called
* directly.
* Assumes it is only called from user space and entered with interrupts off.
*/
ENTRY(ia32_syscall)
CFI_STARTPROC32 simple
CFI_SIGNAL_FRAME
CFI_DEF_CFA rsp,SS+8-RIP
/*CFI_REL_OFFSET ss,SS-RIP*/
CFI_REL_OFFSET rsp,RSP-RIP
/*CFI_REL_OFFSET rflags,EFLAGS-RIP*/
/*CFI_REL_OFFSET cs,CS-RIP*/
CFI_REL_OFFSET rip,RIP-RIP
PARAVIRT_ADJUST_EXCEPTION_FRAME
SWAPGS
/*
* No need to follow this irqs on/off section: the syscall
* disabled irqs and here we enable it straight after entry:
*/
ENABLE_INTERRUPTS(CLBR_NONE)
movl %eax,%eax
pushq %rax
CFI_ADJUST_CFA_OFFSET 8
cld
/* note the registers are not zero extended to the sf.
this could be a problem. */
SAVE_ARGS 0,0,1
GET_THREAD_INFO(%r10)
orl $TS_COMPAT,TI_status(%r10)
testl $_TIF_WORK_SYSCALL_ENTRY,TI_flags(%r10)
jnz ia32_tracesys
cmpl $(IA32_NR_syscalls-1),%eax
ja ia32_badsys
ia32_do_call:
IA32_ARG_FIXUP
call *ia32_sys_call_table(,%rax,8) # xxx: rip relative
ia32_sysret:
movq %rax,RAX-ARGOFFSET(%rsp)
jmp int_ret_from_sys_call
ia32_tracesys:
SAVE_REST
CLEAR_RREGS
movq $-ENOSYS,RAX(%rsp) /* ptrace can change this for a bad syscall */
movq %rsp,%rdi /* &pt_regs -> arg1 */
call syscall_trace_enter
LOAD_ARGS32 ARGOFFSET /* reload args from stack in case ptrace changed it */
RESTORE_REST
cmpl $(IA32_NR_syscalls-1),%eax
ja int_ret_from_sys_call /* ia32_tracesys has set RAX(%rsp) */
jmp ia32_do_call
END(ia32_syscall)
ia32_badsys:
movq $0,ORIG_RAX-ARGOFFSET(%rsp)
movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
jmp int_ret_from_sys_call
quiet_ni_syscall:
movq $-ENOSYS,%rax
ret
CFI_ENDPROC
.macro PTREGSCALL label, func, arg
.globl \label
\label:
leaq \func(%rip),%rax
leaq -ARGOFFSET+8(%rsp),\arg /* 8 for return address */
jmp ia32_ptregs_common
.endm
CFI_STARTPROC32
PTREGSCALL stub32_rt_sigreturn, sys32_rt_sigreturn, %rdi
PTREGSCALL stub32_sigreturn, sys32_sigreturn, %rdi
PTREGSCALL stub32_sigaltstack, sys32_sigaltstack, %rdx
PTREGSCALL stub32_execve, sys32_execve, %rcx
PTREGSCALL stub32_fork, sys_fork, %rdi
PTREGSCALL stub32_clone, sys32_clone, %rdx
PTREGSCALL stub32_vfork, sys_vfork, %rdi
PTREGSCALL stub32_iopl, sys_iopl, %rsi
ENTRY(ia32_ptregs_common)
popq %r11
CFI_ENDPROC
CFI_STARTPROC32 simple
CFI_SIGNAL_FRAME
CFI_DEF_CFA rsp,SS+8-ARGOFFSET
CFI_REL_OFFSET rax,RAX-ARGOFFSET
CFI_REL_OFFSET rcx,RCX-ARGOFFSET
CFI_REL_OFFSET rdx,RDX-ARGOFFSET
CFI_REL_OFFSET rsi,RSI-ARGOFFSET
CFI_REL_OFFSET rdi,RDI-ARGOFFSET
CFI_REL_OFFSET rip,RIP-ARGOFFSET
/* CFI_REL_OFFSET cs,CS-ARGOFFSET*/
/* CFI_REL_OFFSET rflags,EFLAGS-ARGOFFSET*/
CFI_REL_OFFSET rsp,RSP-ARGOFFSET
/* CFI_REL_OFFSET ss,SS-ARGOFFSET*/
SAVE_REST
call *%rax
RESTORE_REST
jmp ia32_sysret /* misbalances the return cache */
CFI_ENDPROC
END(ia32_ptregs_common)
.section .rodata,"a"
.align 8
ia32_sys_call_table:
.quad sys_restart_syscall
.quad sys_exit
.quad stub32_fork
.quad sys_read
.quad sys_write
.quad compat_sys_open /* 5 */
.quad sys_close
.quad sys32_waitpid
.quad sys_creat
.quad sys_link
.quad sys_unlink /* 10 */
.quad stub32_execve
.quad sys_chdir
.quad compat_sys_time
.quad sys_mknod
.quad sys_chmod /* 15 */
.quad sys_lchown16
.quad quiet_ni_syscall /* old break syscall holder */
.quad sys_stat
.quad sys32_lseek
.quad sys_getpid /* 20 */
.quad compat_sys_mount /* mount */
.quad sys_oldumount /* old_umount */
.quad sys_setuid16
.quad sys_getuid16
.quad compat_sys_stime /* stime */ /* 25 */
.quad compat_sys_ptrace /* ptrace */
.quad sys_alarm
.quad sys_fstat /* (old)fstat */
.quad sys_pause
.quad compat_sys_utime /* 30 */
.quad quiet_ni_syscall /* old stty syscall holder */
.quad quiet_ni_syscall /* old gtty syscall holder */
.quad sys_access
.quad sys_nice
.quad quiet_ni_syscall /* 35 */ /* old ftime syscall holder */
.quad sys_sync
.quad sys32_kill
.quad sys_rename
.quad sys_mkdir
.quad sys_rmdir /* 40 */
.quad sys_dup
.quad sys32_pipe
.quad compat_sys_times
.quad quiet_ni_syscall /* old prof syscall holder */
.quad sys_brk /* 45 */
.quad sys_setgid16
.quad sys_getgid16
.quad sys_signal
.quad sys_geteuid16
.quad sys_getegid16 /* 50 */
.quad sys_acct
.quad sys_umount /* new_umount */
.quad quiet_ni_syscall /* old lock syscall holder */
.quad compat_sys_ioctl
.quad compat_sys_fcntl64 /* 55 */
.quad quiet_ni_syscall /* old mpx syscall holder */
.quad sys_setpgid
.quad quiet_ni_syscall /* old ulimit syscall holder */
.quad sys32_olduname
.quad sys_umask /* 60 */
.quad sys_chroot
.quad compat_sys_ustat
.quad sys_dup2
.quad sys_getppid
.quad sys_getpgrp /* 65 */
.quad sys_setsid
.quad sys32_sigaction
.quad sys_sgetmask
.quad sys_ssetmask
.quad sys_setreuid16 /* 70 */
.quad sys_setregid16
.quad sys32_sigsuspend
.quad compat_sys_sigpending
.quad sys_sethostname
.quad compat_sys_setrlimit /* 75 */
.quad compat_sys_old_getrlimit /* old_getrlimit */
.quad compat_sys_getrusage
.quad compat_sys_gettimeofday
.quad compat_sys_settimeofday
.quad sys_getgroups16 /* 80 */
.quad sys_setgroups16
.quad sys32_old_select
.quad sys_symlink
.quad sys_lstat
.quad sys_readlink /* 85 */
.quad sys_uselib
.quad sys_swapon
.quad sys_reboot
.quad compat_sys_old_readdir
.quad sys32_mmap /* 90 */
.quad sys_munmap
.quad sys_truncate
.quad sys_ftruncate
.quad sys_fchmod
.quad sys_fchown16 /* 95 */
.quad sys_getpriority
.quad sys_setpriority
.quad quiet_ni_syscall /* old profil syscall holder */
.quad compat_sys_statfs
.quad compat_sys_fstatfs /* 100 */
.quad sys_ioperm
.quad compat_sys_socketcall
.quad sys_syslog
.quad compat_sys_setitimer
.quad compat_sys_getitimer /* 105 */
.quad compat_sys_newstat
.quad compat_sys_newlstat
.quad compat_sys_newfstat
.quad sys32_uname
.quad stub32_iopl /* 110 */
.quad sys_vhangup
.quad quiet_ni_syscall /* old "idle" system call */
.quad sys32_vm86_warning /* vm86old */
.quad compat_sys_wait4
.quad sys_swapoff /* 115 */
.quad compat_sys_sysinfo
.quad sys32_ipc
.quad sys_fsync
.quad stub32_sigreturn
.quad stub32_clone /* 120 */
.quad sys_setdomainname
.quad sys_uname
.quad sys_modify_ldt
.quad compat_sys_adjtimex
.quad sys32_mprotect /* 125 */
.quad compat_sys_sigprocmask
.quad quiet_ni_syscall /* create_module */
.quad sys_init_module
.quad sys_delete_module
.quad quiet_ni_syscall /* 130 get_kernel_syms */
.quad sys32_quotactl
.quad sys_getpgid
.quad sys_fchdir
.quad quiet_ni_syscall /* bdflush */
.quad sys_sysfs /* 135 */
.quad sys_personality
.quad quiet_ni_syscall /* for afs_syscall */
.quad sys_setfsuid16
.quad sys_setfsgid16
.quad sys_llseek /* 140 */
.quad compat_sys_getdents
.quad compat_sys_select
.quad sys_flock
.quad sys_msync
.quad compat_sys_readv /* 145 */
.quad compat_sys_writev
.quad sys_getsid
.quad sys_fdatasync
.quad sys32_sysctl /* sysctl */
.quad sys_mlock /* 150 */
.quad sys_munlock
.quad sys_mlockall
.quad sys_munlockall
.quad sys_sched_setparam
.quad sys_sched_getparam /* 155 */
.quad sys_sched_setscheduler
.quad sys_sched_getscheduler
.quad sys_sched_yield
.quad sys_sched_get_priority_max
.quad sys_sched_get_priority_min /* 160 */
.quad sys32_sched_rr_get_interval
.quad compat_sys_nanosleep
.quad sys_mremap
.quad sys_setresuid16
.quad sys_getresuid16 /* 165 */
.quad sys32_vm86_warning /* vm86 */
.quad quiet_ni_syscall /* query_module */
.quad sys_poll
.quad compat_sys_nfsservctl
.quad sys_setresgid16 /* 170 */
.quad sys_getresgid16
.quad sys_prctl
.quad stub32_rt_sigreturn
.quad sys32_rt_sigaction
.quad sys32_rt_sigprocmask /* 175 */
.quad sys32_rt_sigpending
.quad compat_sys_rt_sigtimedwait
.quad sys32_rt_sigqueueinfo
.quad sys_rt_sigsuspend
.quad sys32_pread /* 180 */
.quad sys32_pwrite
.quad sys_chown16
.quad sys_getcwd
.quad sys_capget
.quad sys_capset
.quad stub32_sigaltstack
.quad sys32_sendfile
.quad quiet_ni_syscall /* streams1 */
.quad quiet_ni_syscall /* streams2 */
.quad stub32_vfork /* 190 */
.quad compat_sys_getrlimit
.quad sys32_mmap2
.quad sys32_truncate64
.quad sys32_ftruncate64
.quad sys32_stat64 /* 195 */
.quad sys32_lstat64
.quad sys32_fstat64
.quad sys_lchown
.quad sys_getuid
.quad sys_getgid /* 200 */
.quad sys_geteuid
.quad sys_getegid
.quad sys_setreuid
.quad sys_setregid
.quad sys_getgroups /* 205 */
.quad sys_setgroups
.quad sys_fchown
.quad sys_setresuid
.quad sys_getresuid
.quad sys_setresgid /* 210 */
.quad sys_getresgid
.quad sys_chown
.quad sys_setuid
.quad sys_setgid
.quad sys_setfsuid /* 215 */
.quad sys_setfsgid
.quad sys_pivot_root
.quad sys_mincore
.quad sys_madvise
.quad compat_sys_getdents64 /* 220 getdents64 */
.quad compat_sys_fcntl64
.quad quiet_ni_syscall /* tux */
.quad quiet_ni_syscall /* security */
.quad sys_gettid
.quad sys32_readahead /* 225 */
.quad sys_setxattr
.quad sys_lsetxattr
.quad sys_fsetxattr
.quad sys_getxattr
.quad sys_lgetxattr /* 230 */
.quad sys_fgetxattr
.quad sys_listxattr
.quad sys_llistxattr
.quad sys_flistxattr
.quad sys_removexattr /* 235 */
.quad sys_lremovexattr
.quad sys_fremovexattr
.quad sys_tkill
.quad sys_sendfile64
.quad compat_sys_futex /* 240 */
.quad compat_sys_sched_setaffinity
.quad compat_sys_sched_getaffinity
.quad sys_set_thread_area
.quad sys_get_thread_area
.quad compat_sys_io_setup /* 245 */
.quad sys_io_destroy
.quad compat_sys_io_getevents
.quad compat_sys_io_submit
.quad sys_io_cancel
.quad sys32_fadvise64 /* 250 */
.quad quiet_ni_syscall /* free_huge_pages */
.quad sys_exit_group
.quad sys32_lookup_dcookie
.quad sys_epoll_create
.quad sys_epoll_ctl /* 255 */
.quad sys_epoll_wait
.quad sys_remap_file_pages
.quad sys_set_tid_address
.quad compat_sys_timer_create
.quad compat_sys_timer_settime /* 260 */
.quad compat_sys_timer_gettime
.quad sys_timer_getoverrun
.quad sys_timer_delete
.quad compat_sys_clock_settime
.quad compat_sys_clock_gettime /* 265 */
.quad compat_sys_clock_getres
.quad compat_sys_clock_nanosleep
.quad compat_sys_statfs64
.quad compat_sys_fstatfs64
.quad sys_tgkill /* 270 */
.quad compat_sys_utimes
.quad sys32_fadvise64_64
.quad quiet_ni_syscall /* sys_vserver */
.quad sys_mbind
.quad compat_sys_get_mempolicy /* 275 */
.quad sys_set_mempolicy
.quad compat_sys_mq_open
.quad sys_mq_unlink
.quad compat_sys_mq_timedsend
.quad compat_sys_mq_timedreceive /* 280 */
.quad compat_sys_mq_notify
.quad compat_sys_mq_getsetattr
.quad compat_sys_kexec_load /* reserved for kexec */
.quad compat_sys_waitid
.quad quiet_ni_syscall /* 285: sys_altroot */
.quad sys_add_key
.quad sys_request_key
.quad sys_keyctl
.quad sys_ioprio_set
.quad sys_ioprio_get /* 290 */
.quad sys_inotify_init
.quad sys_inotify_add_watch
.quad sys_inotify_rm_watch
.quad sys_migrate_pages
.quad compat_sys_openat /* 295 */
.quad sys_mkdirat
.quad sys_mknodat
.quad sys_fchownat
.quad compat_sys_futimesat
.quad sys32_fstatat /* 300 */
.quad sys_unlinkat
.quad sys_renameat
.quad sys_linkat
.quad sys_symlinkat
.quad sys_readlinkat /* 305 */
.quad sys_fchmodat
.quad sys_faccessat
.quad compat_sys_pselect6
.quad compat_sys_ppoll
.quad sys_unshare /* 310 */
.quad compat_sys_set_robust_list
.quad compat_sys_get_robust_list
.quad sys_splice
.quad sys32_sync_file_range
.quad sys_tee /* 315 */
.quad compat_sys_vmsplice
.quad compat_sys_move_pages
.quad sys_getcpu
.quad sys_epoll_pwait
.quad compat_sys_utimensat /* 320 */
.quad compat_sys_signalfd
.quad sys_timerfd_create
.quad sys_eventfd
.quad sys32_fallocate
.quad compat_sys_timerfd_settime /* 325 */
.quad compat_sys_timerfd_gettime
.quad compat_sys_signalfd4
.quad sys_eventfd2
.quad sys_epoll_create1
.quad sys_dup3 /* 330 */
.quad sys_pipe2
.quad sys_inotify_init1
.quad compat_sys_preadv
.quad compat_sys_pwritev
ia32_syscall_end:
Reference in New Issue View Git Blame Copy Permalink