92db6d10bc
Currently we attempt to predict how many irqs we will be able to allocate with msi using pci_vector_resources and some complicated accounting, and then we only allow each device as many irqs as we think are available on average. Only the s2io driver even takes advantage of this feature all other drivers have a fixed number of irqs they need and bail if they can't get them. pci_vector_resources is inaccurate if anyone ever frees an irq. The whole implmentation is racy. The current irq limit policy does not appear to make sense with current drivers. So I have simplified things. We can revisit this we we need a more sophisticated policy. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
81 lines
2.6 KiB
C
81 lines
2.6 KiB
C
/*
|
|
* Copyright (C) 2003-2004 Intel
|
|
* Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
|
|
*/
|
|
|
|
#ifndef MSI_H
|
|
#define MSI_H
|
|
|
|
#include <asm/msi.h>
|
|
|
|
extern int vector_irq[NR_VECTORS];
|
|
extern void (*interrupt[NR_IRQS])(void);
|
|
|
|
/*
|
|
* MSI-X Address Register
|
|
*/
|
|
#define PCI_MSIX_FLAGS_QSIZE 0x7FF
|
|
#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
|
|
#define PCI_MSIX_FLAGS_BIRMASK (7 << 0)
|
|
#define PCI_MSIX_FLAGS_BITMASK (1 << 0)
|
|
|
|
#define PCI_MSIX_ENTRY_SIZE 16
|
|
#define PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET 0
|
|
#define PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET 4
|
|
#define PCI_MSIX_ENTRY_DATA_OFFSET 8
|
|
#define PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET 12
|
|
|
|
#define msi_control_reg(base) (base + PCI_MSI_FLAGS)
|
|
#define msi_lower_address_reg(base) (base + PCI_MSI_ADDRESS_LO)
|
|
#define msi_upper_address_reg(base) (base + PCI_MSI_ADDRESS_HI)
|
|
#define msi_data_reg(base, is64bit) \
|
|
( (is64bit == 1) ? base+PCI_MSI_DATA_64 : base+PCI_MSI_DATA_32 )
|
|
#define msi_mask_bits_reg(base, is64bit) \
|
|
( (is64bit == 1) ? base+PCI_MSI_MASK_BIT : base+PCI_MSI_MASK_BIT-4)
|
|
#define msi_disable(control) control &= ~PCI_MSI_FLAGS_ENABLE
|
|
#define multi_msi_capable(control) \
|
|
(1 << ((control & PCI_MSI_FLAGS_QMASK) >> 1))
|
|
#define multi_msi_enable(control, num) \
|
|
control |= (((num >> 1) << 4) & PCI_MSI_FLAGS_QSIZE);
|
|
#define is_64bit_address(control) (!!(control & PCI_MSI_FLAGS_64BIT))
|
|
#define is_mask_bit_support(control) (!!(control & PCI_MSI_FLAGS_MASKBIT))
|
|
#define msi_enable(control, num) multi_msi_enable(control, num); \
|
|
control |= PCI_MSI_FLAGS_ENABLE
|
|
|
|
#define msix_table_offset_reg(base) (base + 0x04)
|
|
#define msix_pba_offset_reg(base) (base + 0x08)
|
|
#define msix_enable(control) control |= PCI_MSIX_FLAGS_ENABLE
|
|
#define msix_disable(control) control &= ~PCI_MSIX_FLAGS_ENABLE
|
|
#define msix_table_size(control) ((control & PCI_MSIX_FLAGS_QSIZE)+1)
|
|
#define multi_msix_capable msix_table_size
|
|
#define msix_unmask(address) (address & ~PCI_MSIX_FLAGS_BITMASK)
|
|
#define msix_mask(address) (address | PCI_MSIX_FLAGS_BITMASK)
|
|
#define msix_is_pending(address) (address & PCI_MSIX_FLAGS_PENDMASK)
|
|
|
|
struct msi_desc {
|
|
struct {
|
|
__u8 type : 5; /* {0: unused, 5h:MSI, 11h:MSI-X} */
|
|
__u8 maskbit : 1; /* mask-pending bit supported ? */
|
|
__u8 state : 1; /* {0: free, 1: busy} */
|
|
__u8 is_64 : 1; /* Address size: 0=32bit 1=64bit */
|
|
__u8 entry_nr; /* specific enabled entry */
|
|
__u8 default_vector; /* default pre-assigned vector */
|
|
__u8 pos; /* Location of the msi capability */
|
|
}msi_attrib;
|
|
|
|
struct {
|
|
__u16 head;
|
|
__u16 tail;
|
|
}link;
|
|
|
|
void __iomem *mask_base;
|
|
struct pci_dev *dev;
|
|
|
|
#ifdef CONFIG_PM
|
|
/* PM save area for MSIX address/data */
|
|
struct msi_msg msg_save;
|
|
#endif
|
|
};
|
|
|
|
#endif /* MSI_H */
|