kernel-ark/arch/powerpc/sysdev
Benjamin Herrenschmidt fc3fb71c3e [POWERPC] pci32: Add flags modifying the PCI code behaviour
This adds to the 32 bits PCI code some flags, replacing the old
pci_assign_all_busses global, that allow us to control various
aspects of the PCI probing, such as whether to re-assign all
resources or not, or to not try to assign anything at all.

This also adds the flag x86 already has to avoid ISA alignment
on bridges that don't have ISA forwarding enabled (no legacy
devices on the top level bus) and sets it for PowerMacs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-12-20 16:18:07 +11:00
..
bestcomm [POWERPC] arch/powerpc/: Spelling fixes 2007-12-20 16:15:51 +11:00
qe_lib [POWERPC] qe: add function qe_clock_source() 2007-12-13 22:59:27 -06:00
axonram.c [POWERPC] Clean out asm/of_{platform, device}.h from sysdev/ 2007-12-06 14:44:30 +11:00
commproc.c [POWERPC] Move CPM command handling into the cpm drivers 2007-12-13 22:47:16 -06:00
commproc.h [POWERPC] 8xx: Infrastructure code cleanup. 2007-10-03 20:36:35 -05:00
cpm2_common.c [POWERPC] Move CPM command handling into the cpm drivers 2007-12-13 22:47:16 -06:00
cpm2_pic.c [POWERPC] cpm2: Infrastructure code cleanup. 2007-10-04 11:02:04 -05:00
cpm2_pic.h
cpm_common.c [POWERPC] cpm: Fix a couple minor issues in cpm_common.c. 2007-11-09 03:47:44 -06:00
dart_iommu.c [POWERPC] Fix section mismatch in dart_iommu.c 2007-08-17 11:02:06 +10:00
dart.h
dcr-low.S
dcr.c Use dcr_host_t.base in dcr_unmap() 2007-10-15 14:29:49 -04:00
fsl_pci.c [POWERPC] pci32: Add flags modifying the PCI code behaviour 2007-12-20 16:18:07 +11:00
fsl_pci.h
fsl_soc.c [POWERPC] FSL: enet device tree cleanups 2007-12-12 01:50:45 -06:00
fsl_soc.h [POWERPC] 85xx/86xx: refactor RSTCR reset code 2007-10-08 08:38:47 -05:00
grackle.c [POWERPC] pci32: Add flags modifying the PCI code behaviour 2007-12-20 16:18:07 +11:00
i8259.c [POWERPC] i8259: Add disable method 2007-11-08 14:15:29 +11:00
indirect_pci.c [POWERPC] PCI: Add 64-bit physical address support to setup_indirect_pci 2007-10-12 14:05:17 +10:00
ipic.c [POWERPC] ipic: ack only for edge interrupts 2007-12-12 01:53:07 -06:00
ipic.h [POWERPC] ipic: ack only for edge interrupts 2007-12-12 01:53:07 -06:00
Makefile [POWERPC] pasemi: Implement MSI support 2007-12-20 16:15:23 +11:00
micropatch.c
mmio_nvram.c [POWERPC] arch/powerpc/: Spelling fixes 2007-12-20 16:15:51 +11:00
mpc8xx_pic.c [POWERPC] 8xx: Infrastructure code cleanup. 2007-10-03 20:36:35 -05:00
mpc8xx_pic.h
mpic_msi.c [POWERPC] Fix section mismatch in PCI code 2007-09-19 15:25:34 +10:00
mpic_pasemi_msi.c [POWERPC] pasemi: Implement MSI support 2007-12-20 16:15:23 +11:00
mpic_u3msi.c [POWERPC] Inline u3msi_compose_msi_msg() 2007-10-03 09:11:42 +10:00
mpic.c [POWERPC] pasemi: Implement MSI support 2007-12-20 16:15:23 +11:00
mpic.h [POWERPC] pasemi: Implement MSI support 2007-12-20 16:15:23 +11:00
mv64x60_dev.c [WATCHDOG] mv64x60_wdt: Add arch/powerpc platform support 2007-07-24 21:16:02 +00:00
mv64x60_pci.c [POWERPC] Fix mv643xx_pci sysfs .read and .write functions 2007-11-08 14:15:29 +11:00
mv64x60_pic.c [POWERPC] Provide a default irq_host match, which matches on an exact of_node 2007-09-14 01:33:20 +10:00
mv64x60_udbg.c [POWERPC] Add Marvell mv64x60 udbg putc/getc functions 2007-09-22 14:49:21 +10:00
mv64x60.h [POWERPC] Add Marvell mv64x60 udbg putc/getc functions 2007-09-22 14:49:21 +10:00
pmi.c [POWERPC] Clean out asm/of_{platform, device}.h from sysdev/ 2007-12-06 14:44:30 +11:00
rtc_cmos_setup.c [POWERPC] Add interrupt resource for RTC CMOS driver 2007-08-17 13:18:58 -05:00
tsi108_dev.c
tsi108_pci.c [POWERPC] Provide a default irq_host match, which matches on an exact of_node 2007-09-14 01:33:20 +10:00
uic.c [POWERPC] 4xx: UIC add mask_ack callback 2007-11-19 08:22:03 -06:00
xilinx_intc.c [POWERPC] Virtex: add xilinx interrupt controller driver 2007-10-03 07:23:14 -05:00