kernel-ark/arch/sparc/kernel/sun4m_irq.c
David Howells 40220c1a19 IRQ: Use the new typedef for interrupt handler function pointers
Use the new typedef for interrupt handler function pointers rather than
actually spelling out the full thing each time.  This was scripted with the
following small shell script:

#!/bin/sh
egrep -nHrl -e 'irqreturn_t[ 	]*[(][*]' $* |
while read i
do
    echo $i
    perl -pi -e 's/irqreturn_t\s*[(]\s*[*]\s*([_a-zA-Z0-9]*)\s*[)]\s*[(]\s*int\s*,\s*void\s*[*]\s*[)]/irq_handler_t \1/g' $i || exit $?
done

Signed-Off-By: David Howells <dhowells@redhat.com>
2006-10-09 12:19:47 +01:00

391 lines
12 KiB
C

/* sun4m_irq.c
* arch/sparc/kernel/sun4m_irq.c:
*
* djhr: Hacked out of irq.c into a CPU dependent version.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
* Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
* Copyright (C) 1995 Pete A. Zaitcev (zaitcev@yahoo.com)
* Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk)
*/
#include <linux/errno.h>
#include <linux/linkage.h>
#include <linux/kernel_stat.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <asm/ptrace.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/psr.h>
#include <asm/vaddrs.h>
#include <asm/timer.h>
#include <asm/openprom.h>
#include <asm/oplib.h>
#include <asm/traps.h>
#include <asm/pgalloc.h>
#include <asm/pgtable.h>
#include <asm/smp.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/sbus.h>
#include <asm/cacheflush.h>
static unsigned long dummy;
struct sun4m_intregs *sun4m_interrupts;
unsigned long *irq_rcvreg = &dummy;
/* These tables only apply for interrupts greater than 15..
*
* any intr value below 0x10 is considered to be a soft-int
* this may be useful or it may not.. but that's how I've done it.
* and it won't clash with what OBP is telling us about devices.
*
* take an encoded intr value and lookup if it's valid
* then get the mask bits that match from irq_mask
*
* P3: Translation from irq 0x0d to mask 0x2000 is for MrCoffee.
*/
static unsigned char irq_xlate[32] = {
/* 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, a, b, c, d, e, f */
0, 0, 0, 0, 1, 0, 2, 0, 3, 0, 4, 5, 6, 14, 0, 7,
0, 0, 8, 9, 0, 10, 0, 11, 0, 12, 0, 13, 0, 14, 0, 0
};
static unsigned long irq_mask[] = {
0, /* illegal index */
SUN4M_INT_SCSI, /* 1 irq 4 */
SUN4M_INT_ETHERNET, /* 2 irq 6 */
SUN4M_INT_VIDEO, /* 3 irq 8 */
SUN4M_INT_REALTIME, /* 4 irq 10 */
SUN4M_INT_FLOPPY, /* 5 irq 11 */
(SUN4M_INT_SERIAL | SUN4M_INT_KBDMS), /* 6 irq 12 */
SUN4M_INT_MODULE_ERR, /* 7 irq 15 */
SUN4M_INT_SBUS(0), /* 8 irq 2 */
SUN4M_INT_SBUS(1), /* 9 irq 3 */
SUN4M_INT_SBUS(2), /* 10 irq 5 */
SUN4M_INT_SBUS(3), /* 11 irq 7 */
SUN4M_INT_SBUS(4), /* 12 irq 9 */
SUN4M_INT_SBUS(5), /* 13 irq 11 */
SUN4M_INT_SBUS(6) /* 14 irq 13 */
};
static int sun4m_pil_map[] = { 0, 2, 3, 5, 7, 9, 11, 13 };
unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev, unsigned int sbint)
{
if (sbint >= sizeof(sun4m_pil_map)) {
printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
BUG();
}
return sun4m_pil_map[sbint] | 0x30;
}
inline unsigned long sun4m_get_irqmask(unsigned int irq)
{
unsigned long mask;
if (irq > 0x20) {
/* OBIO/SBUS interrupts */
irq &= 0x1f;
mask = irq_mask[irq_xlate[irq]];
if (!mask)
printk("sun4m_get_irqmask: IRQ%d has no valid mask!\n",irq);
} else {
/* Soft Interrupts will come here.
* Currently there is no way to trigger them but I'm sure
* something could be cooked up.
*/
irq &= 0xf;
mask = SUN4M_SOFT_INT(irq);
}
return mask;
}
static void sun4m_disable_irq(unsigned int irq_nr)
{
unsigned long mask, flags;
int cpu = smp_processor_id();
mask = sun4m_get_irqmask(irq_nr);
local_irq_save(flags);
if (irq_nr > 15)
sun4m_interrupts->set = mask;
else
sun4m_interrupts->cpu_intregs[cpu].set = mask;
local_irq_restore(flags);
}
static void sun4m_enable_irq(unsigned int irq_nr)
{
unsigned long mask, flags;
int cpu = smp_processor_id();
/* Dreadful floppy hack. When we use 0x2b instead of
* 0x0b the system blows (it starts to whistle!).
* So we continue to use 0x0b. Fixme ASAP. --P3
*/
if (irq_nr != 0x0b) {
mask = sun4m_get_irqmask(irq_nr);
local_irq_save(flags);
if (irq_nr > 15)
sun4m_interrupts->clear = mask;
else
sun4m_interrupts->cpu_intregs[cpu].clear = mask;
local_irq_restore(flags);
} else {
local_irq_save(flags);
sun4m_interrupts->clear = SUN4M_INT_FLOPPY;
local_irq_restore(flags);
}
}
static unsigned long cpu_pil_to_imask[16] = {
/*0*/ 0x00000000,
/*1*/ 0x00000000,
/*2*/ SUN4M_INT_SBUS(0) | SUN4M_INT_VME(0),
/*3*/ SUN4M_INT_SBUS(1) | SUN4M_INT_VME(1),
/*4*/ SUN4M_INT_SCSI,
/*5*/ SUN4M_INT_SBUS(2) | SUN4M_INT_VME(2),
/*6*/ SUN4M_INT_ETHERNET,
/*7*/ SUN4M_INT_SBUS(3) | SUN4M_INT_VME(3),
/*8*/ SUN4M_INT_VIDEO,
/*9*/ SUN4M_INT_SBUS(4) | SUN4M_INT_VME(4) | SUN4M_INT_MODULE_ERR,
/*10*/ SUN4M_INT_REALTIME,
/*11*/ SUN4M_INT_SBUS(5) | SUN4M_INT_VME(5) | SUN4M_INT_FLOPPY,
/*12*/ SUN4M_INT_SERIAL | SUN4M_INT_KBDMS,
/*13*/ SUN4M_INT_AUDIO,
/*14*/ SUN4M_INT_E14,
/*15*/ 0x00000000
};
/* We assume the caller has disabled local interrupts when these are called,
* or else very bizarre behavior will result.
*/
static void sun4m_disable_pil_irq(unsigned int pil)
{
sun4m_interrupts->set = cpu_pil_to_imask[pil];
}
static void sun4m_enable_pil_irq(unsigned int pil)
{
sun4m_interrupts->clear = cpu_pil_to_imask[pil];
}
#ifdef CONFIG_SMP
static void sun4m_send_ipi(int cpu, int level)
{
unsigned long mask;
mask = sun4m_get_irqmask(level);
sun4m_interrupts->cpu_intregs[cpu].set = mask;
}
static void sun4m_clear_ipi(int cpu, int level)
{
unsigned long mask;
mask = sun4m_get_irqmask(level);
sun4m_interrupts->cpu_intregs[cpu].clear = mask;
}
static void sun4m_set_udt(int cpu)
{
sun4m_interrupts->undirected_target = cpu;
}
#endif
#define OBIO_INTR 0x20
#define TIMER_IRQ (OBIO_INTR | 10)
#define PROFILE_IRQ (OBIO_INTR | 14)
struct sun4m_timer_regs *sun4m_timers;
unsigned int lvl14_resolution = (((1000000/HZ) + 1) << 10);
static void sun4m_clear_clock_irq(void)
{
volatile unsigned int clear_intr;
clear_intr = sun4m_timers->l10_timer_limit;
}
static void sun4m_clear_profile_irq(int cpu)
{
volatile unsigned int clear;
clear = sun4m_timers->cpu_timers[cpu].l14_timer_limit;
}
static void sun4m_load_profile_irq(int cpu, unsigned int limit)
{
sun4m_timers->cpu_timers[cpu].l14_timer_limit = limit;
}
static void __init sun4m_init_timers(irq_handler_t counter_fn)
{
int reg_count, irq, cpu;
struct linux_prom_registers cnt_regs[PROMREG_MAX];
int obio_node, cnt_node;
struct resource r;
cnt_node = 0;
if((obio_node =
prom_searchsiblings (prom_getchild(prom_root_node), "obio")) == 0 ||
(obio_node = prom_getchild (obio_node)) == 0 ||
(cnt_node = prom_searchsiblings (obio_node, "counter")) == 0) {
prom_printf("Cannot find /obio/counter node\n");
prom_halt();
}
reg_count = prom_getproperty(cnt_node, "reg",
(void *) cnt_regs, sizeof(cnt_regs));
reg_count = (reg_count/sizeof(struct linux_prom_registers));
/* Apply the obio ranges to the timer registers. */
prom_apply_obio_ranges(cnt_regs, reg_count);
cnt_regs[4].phys_addr = cnt_regs[reg_count-1].phys_addr;
cnt_regs[4].reg_size = cnt_regs[reg_count-1].reg_size;
cnt_regs[4].which_io = cnt_regs[reg_count-1].which_io;
for(obio_node = 1; obio_node < 4; obio_node++) {
cnt_regs[obio_node].phys_addr =
cnt_regs[obio_node-1].phys_addr + PAGE_SIZE;
cnt_regs[obio_node].reg_size = cnt_regs[obio_node-1].reg_size;
cnt_regs[obio_node].which_io = cnt_regs[obio_node-1].which_io;
}
memset((char*)&r, 0, sizeof(struct resource));
/* Map the per-cpu Counter registers. */
r.flags = cnt_regs[0].which_io;
r.start = cnt_regs[0].phys_addr;
sun4m_timers = (struct sun4m_timer_regs *) sbus_ioremap(&r, 0,
PAGE_SIZE*SUN4M_NCPUS, "sun4m_cpu_cnt");
/* Map the system Counter register. */
/* XXX Here we expect consequent calls to yeld adjusent maps. */
r.flags = cnt_regs[4].which_io;
r.start = cnt_regs[4].phys_addr;
sbus_ioremap(&r, 0, cnt_regs[4].reg_size, "sun4m_sys_cnt");
sun4m_timers->l10_timer_limit = (((1000000/HZ) + 1) << 10);
master_l10_counter = &sun4m_timers->l10_cur_count;
master_l10_limit = &sun4m_timers->l10_timer_limit;
irq = request_irq(TIMER_IRQ,
counter_fn,
(IRQF_DISABLED | SA_STATIC_ALLOC),
"timer", NULL);
if (irq) {
prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ);
prom_halt();
}
if (!cpu_find_by_instance(1, NULL, NULL)) {
for(cpu = 0; cpu < 4; cpu++)
sun4m_timers->cpu_timers[cpu].l14_timer_limit = 0;
sun4m_interrupts->set = SUN4M_INT_E14;
} else {
sun4m_timers->cpu_timers[0].l14_timer_limit = 0;
}
#ifdef CONFIG_SMP
{
unsigned long flags;
extern unsigned long lvl14_save[4];
struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)];
/* For SMP we use the level 14 ticker, however the bootup code
* has copied the firmwares level 14 vector into boot cpu's
* trap table, we must fix this now or we get squashed.
*/
local_irq_save(flags);
trap_table->inst_one = lvl14_save[0];
trap_table->inst_two = lvl14_save[1];
trap_table->inst_three = lvl14_save[2];
trap_table->inst_four = lvl14_save[3];
local_flush_cache_all();
local_irq_restore(flags);
}
#endif
}
void __init sun4m_init_IRQ(void)
{
int ie_node,i;
struct linux_prom_registers int_regs[PROMREG_MAX];
int num_regs;
struct resource r;
int mid;
local_irq_disable();
if((ie_node = prom_searchsiblings(prom_getchild(prom_root_node), "obio")) == 0 ||
(ie_node = prom_getchild (ie_node)) == 0 ||
(ie_node = prom_searchsiblings (ie_node, "interrupt")) == 0) {
prom_printf("Cannot find /obio/interrupt node\n");
prom_halt();
}
num_regs = prom_getproperty(ie_node, "reg", (char *) int_regs,
sizeof(int_regs));
num_regs = (num_regs/sizeof(struct linux_prom_registers));
/* Apply the obio ranges to these registers. */
prom_apply_obio_ranges(int_regs, num_regs);
int_regs[4].phys_addr = int_regs[num_regs-1].phys_addr;
int_regs[4].reg_size = int_regs[num_regs-1].reg_size;
int_regs[4].which_io = int_regs[num_regs-1].which_io;
for(ie_node = 1; ie_node < 4; ie_node++) {
int_regs[ie_node].phys_addr = int_regs[ie_node-1].phys_addr + PAGE_SIZE;
int_regs[ie_node].reg_size = int_regs[ie_node-1].reg_size;
int_regs[ie_node].which_io = int_regs[ie_node-1].which_io;
}
memset((char *)&r, 0, sizeof(struct resource));
/* Map the interrupt registers for all possible cpus. */
r.flags = int_regs[0].which_io;
r.start = int_regs[0].phys_addr;
sun4m_interrupts = (struct sun4m_intregs *) sbus_ioremap(&r, 0,
PAGE_SIZE*SUN4M_NCPUS, "interrupts_percpu");
/* Map the system interrupt control registers. */
r.flags = int_regs[4].which_io;
r.start = int_regs[4].phys_addr;
sbus_ioremap(&r, 0, int_regs[4].reg_size, "interrupts_system");
sun4m_interrupts->set = ~SUN4M_INT_MASKALL;
for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++)
sun4m_interrupts->cpu_intregs[mid].clear = ~0x17fff;
if (!cpu_find_by_instance(1, NULL, NULL)) {
/* system wide interrupts go to cpu 0, this should always
* be safe because it is guaranteed to be fitted or OBP doesn't
* come up
*
* Not sure, but writing here on SLAVIO systems may puke
* so I don't do it unless there is more than 1 cpu.
*/
irq_rcvreg = (unsigned long *)
&sun4m_interrupts->undirected_target;
sun4m_interrupts->undirected_target = 0;
}
BTFIXUPSET_CALL(sbint_to_irq, sun4m_sbint_to_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(enable_irq, sun4m_enable_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(disable_irq, sun4m_disable_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(enable_pil_irq, sun4m_enable_pil_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(disable_pil_irq, sun4m_disable_pil_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_clock_irq, sun4m_clear_clock_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_profile_irq, sun4m_clear_profile_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(load_profile_irq, sun4m_load_profile_irq, BTFIXUPCALL_NORM);
sparc_init_timers = sun4m_init_timers;
#ifdef CONFIG_SMP
BTFIXUPSET_CALL(set_cpu_int, sun4m_send_ipi, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_cpu_int, sun4m_clear_ipi, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(set_irq_udt, sun4m_set_udt, BTFIXUPCALL_NORM);
#endif
/* Cannot enable interrupts until OBP ticker is disabled. */
}