davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
8e9c238c38
kernel-ark/drivers/mtd/nand/au1550nd.c
Olaf Hering 733482e445 [PATCH] changing CONFIG_LOCALVERSION rebuilds too much, for no good reason 
This patch removes almost all inclusions of linux/version.h.  The 3
#defines are unused in most of the touched files.

A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is
unfortunatly in linux/version.h.

There are also lots of #ifdef for long obsolete kernels, this was not
touched.  In a few places, the linux/version.h include was move to where
the LINUX_VERSION_CODE was used.

quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'`

search pattern:
/UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h

Signed-off-by: Olaf Hering <olh@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09 07:55:57 -08:00

502 lines
11 KiB
C
Raw Blame History

/*
* drivers/mtd/nand/au1550nd.c
*
* Copyright (C) 2004 Embedded Edge, LLC
*
* $Id: au1550nd.c,v 1.13 2005/11/07 11:14:30 gleixner Exp $
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/version.h>
#include <asm/io.h>
/* fixme: this is ugly */
#if LINUX_VERSION_CODE > KERNEL_VERSION(2, 6, 0)
#include <asm/mach-au1x00/au1xxx.h>
#else
#include <asm/au1000.h>
#ifdef CONFIG_MIPS_PB1550
#include <asm/pb1550.h>
#endif
#ifdef CONFIG_MIPS_DB1550
#include <asm/db1x00.h>
#endif
#endif
/*
* MTD structure for NAND controller
*/
static struct mtd_info *au1550_mtd = NULL;
static void __iomem *p_nand;
static int nand_width = 1; /* default x8*/
/*
* Define partitions for flash device
*/
const static struct mtd_partition partition_info[] = {
{
.name = "NAND FS 0",
.offset = 0,
.size = 8*1024*1024
},
{
.name = "NAND FS 1",
.offset = MTDPART_OFS_APPEND,
.size = MTDPART_SIZ_FULL
}
};
#define NB_OF(x) (sizeof(x)/sizeof(x[0]))
/**
* au_read_byte - read one byte from the chip
* @mtd: MTD device structure
*
* read function for 8bit buswith
*/
static u_char au_read_byte(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
u_char ret = readb(this->IO_ADDR_R);
au_sync();
return ret;
}
/**
* au_write_byte - write one byte to the chip
* @mtd: MTD device structure
* @byte: pointer to data byte to write
*
* write function for 8it buswith
*/
static void au_write_byte(struct mtd_info *mtd, u_char byte)
{
struct nand_chip *this = mtd->priv;
writeb(byte, this->IO_ADDR_W);
au_sync();
}
/**
* au_read_byte16 - read one byte endianess aware from the chip
* @mtd: MTD device structure
*
* read function for 16bit buswith with
* endianess conversion
*/
static u_char au_read_byte16(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
u_char ret = (u_char) cpu_to_le16(readw(this->IO_ADDR_R));
au_sync();
return ret;
}
/**
* au_write_byte16 - write one byte endianess aware to the chip
* @mtd: MTD device structure
* @byte: pointer to data byte to write
*
* write function for 16bit buswith with
* endianess conversion
*/
static void au_write_byte16(struct mtd_info *mtd, u_char byte)
{
struct nand_chip *this = mtd->priv;
writew(le16_to_cpu((u16) byte), this->IO_ADDR_W);
au_sync();
}
/**
* au_read_word - read one word from the chip
* @mtd: MTD device structure
*
* read function for 16bit buswith without
* endianess conversion
*/
static u16 au_read_word(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
u16 ret = readw(this->IO_ADDR_R);
au_sync();
return ret;
}
/**
* au_write_word - write one word to the chip
* @mtd: MTD device structure
* @word: data word to write
*
* write function for 16bit buswith without
* endianess conversion
*/
static void au_write_word(struct mtd_info *mtd, u16 word)
{
struct nand_chip *this = mtd->priv;
writew(word, this->IO_ADDR_W);
au_sync();
}
/**
* au_write_buf - write buffer to chip
* @mtd: MTD device structure
* @buf: data buffer
* @len: number of bytes to write
*
* write function for 8bit buswith
*/
static void au_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
int i;
struct nand_chip *this = mtd->priv;
for (i=0; i<len; i++) {
writeb(buf[i], this->IO_ADDR_W);
au_sync();
}
}
/**
* au_read_buf - read chip data into buffer
* @mtd: MTD device structure
* @buf: buffer to store date
* @len: number of bytes to read
*
* read function for 8bit buswith
*/
static void au_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
int i;
struct nand_chip *this = mtd->priv;
for (i=0; i<len; i++) {
buf[i] = readb(this->IO_ADDR_R);
au_sync();
}
}
/**
* au_verify_buf - Verify chip data against buffer
* @mtd: MTD device structure
* @buf: buffer containing the data to compare
* @len: number of bytes to compare
*
* verify function for 8bit buswith
*/
static int au_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
int i;
struct nand_chip *this = mtd->priv;
for (i=0; i<len; i++) {
if (buf[i] != readb(this->IO_ADDR_R))
return -EFAULT;
au_sync();
}
return 0;
}
/**
* au_write_buf16 - write buffer to chip
* @mtd: MTD device structure
* @buf: data buffer
* @len: number of bytes to write
*
* write function for 16bit buswith
*/
static void au_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
{
int i;
struct nand_chip *this = mtd->priv;
u16 *p = (u16 *) buf;
len >>= 1;
for (i=0; i<len; i++) {
writew(p[i], this->IO_ADDR_W);
au_sync();
}
}
/**
* au_read_buf16 - read chip data into buffer
* @mtd: MTD device structure
* @buf: buffer to store date
* @len: number of bytes to read
*
* read function for 16bit buswith
*/
static void au_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
{
int i;
struct nand_chip *this = mtd->priv;
u16 *p = (u16 *) buf;
len >>= 1;
for (i=0; i<len; i++) {
p[i] = readw(this->IO_ADDR_R);
au_sync();
}
}
/**
* au_verify_buf16 - Verify chip data against buffer
* @mtd: MTD device structure
* @buf: buffer containing the data to compare
* @len: number of bytes to compare
*
* verify function for 16bit buswith
*/
static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len)
{
int i;
struct nand_chip *this = mtd->priv;
u16 *p = (u16 *) buf;
len >>= 1;
for (i=0; i<len; i++) {
if (p[i] != readw(this->IO_ADDR_R))
return -EFAULT;
au_sync();
}
return 0;
}
static void au1550_hwcontrol(struct mtd_info *mtd, int cmd)
{
register struct nand_chip *this = mtd->priv;
switch(cmd){
case NAND_CTL_SETCLE: this->IO_ADDR_W = p_nand + MEM_STNAND_CMD; break;
case NAND_CTL_CLRCLE: this->IO_ADDR_W = p_nand + MEM_STNAND_DATA; break;
case NAND_CTL_SETALE: this->IO_ADDR_W = p_nand + MEM_STNAND_ADDR; break;
case NAND_CTL_CLRALE:
this->IO_ADDR_W = p_nand + MEM_STNAND_DATA;
/* FIXME: Nobody knows why this is neccecary,
* but it works only that way */
udelay(1);
break;
case NAND_CTL_SETNCE:
/* assert (force assert) chip enable */
au_writel((1<<(4+NAND_CS)) , MEM_STNDCTL); break;
break;
case NAND_CTL_CLRNCE:
/* deassert chip enable */
au_writel(0, MEM_STNDCTL); break;
break;
}
this->IO_ADDR_R = this->IO_ADDR_W;
/* Drain the writebuffer */
au_sync();
}
int au1550_device_ready(struct mtd_info *mtd)
{
int ret = (au_readl(MEM_STSTAT) & 0x1) ? 1 : 0;
au_sync();
return ret;
}
/*
* Main initialization routine
*/
int __init au1xxx_nand_init (void)
{
struct nand_chip *this;
u16 boot_swapboot = 0; /* default value */
int retval;
u32 mem_staddr;
u32 nand_phys;
/* Allocate memory for MTD device structure and private data */
au1550_mtd = kmalloc (sizeof(struct mtd_info) +
sizeof (struct nand_chip), GFP_KERNEL);
if (!au1550_mtd) {
printk ("Unable to allocate NAND MTD dev structure.\n");
return -ENOMEM;
}
/* Get pointer to private data */
this = (struct nand_chip *) (&au1550_mtd[1]);
/* Initialize structures */
memset((char *) au1550_mtd, 0, sizeof(struct mtd_info));
memset((char *) this, 0, sizeof(struct nand_chip));
/* Link the private data with the MTD structure */
au1550_mtd->priv = this;
/* disable interrupts */
au_writel(au_readl(MEM_STNDCTL) & ~(1<<8), MEM_STNDCTL);
/* disable NAND boot */
au_writel(au_readl(MEM_STNDCTL) & ~(1<<0), MEM_STNDCTL);
#ifdef CONFIG_MIPS_PB1550
/* set gpio206 high */
au_writel(au_readl(GPIO2_DIR) & ~(1<<6), GPIO2_DIR);
boot_swapboot = (au_readl(MEM_STSTAT) & (0x7<<1)) |
((bcsr->status >> 6) & 0x1);
switch (boot_swapboot) {
case 0:
case 2:
case 8:
case 0xC:
case 0xD:
/* x16 NAND Flash */
nand_width = 0;
break;
case 1:
case 9:
case 3:
case 0xE:
case 0xF:
/* x8 NAND Flash */
nand_width = 1;
break;
default:
printk("Pb1550 NAND: bad boot:swap\n");
retval = -EINVAL;
goto outmem;
}
#endif
/* Configure chip-select; normally done by boot code, e.g. YAMON */
#ifdef NAND_STCFG
if (NAND_CS == 0) {
au_writel(NAND_STCFG, MEM_STCFG0);
au_writel(NAND_STTIME, MEM_STTIME0);
au_writel(NAND_STADDR, MEM_STADDR0);
}
if (NAND_CS == 1) {
au_writel(NAND_STCFG, MEM_STCFG1);
au_writel(NAND_STTIME, MEM_STTIME1);
au_writel(NAND_STADDR, MEM_STADDR1);
}
if (NAND_CS == 2) {
au_writel(NAND_STCFG, MEM_STCFG2);
au_writel(NAND_STTIME, MEM_STTIME2);
au_writel(NAND_STADDR, MEM_STADDR2);
}
if (NAND_CS == 3) {
au_writel(NAND_STCFG, MEM_STCFG3);
au_writel(NAND_STTIME, MEM_STTIME3);
au_writel(NAND_STADDR, MEM_STADDR3);
}
#endif
/* Locate NAND chip-select in order to determine NAND phys address */
mem_staddr = 0x00000000;
if (((au_readl(MEM_STCFG0) & 0x7) == 0x5) && (NAND_CS == 0))
mem_staddr = au_readl(MEM_STADDR0);
else if (((au_readl(MEM_STCFG1) & 0x7) == 0x5) && (NAND_CS == 1))
mem_staddr = au_readl(MEM_STADDR1);
else if (((au_readl(MEM_STCFG2) & 0x7) == 0x5) && (NAND_CS == 2))
mem_staddr = au_readl(MEM_STADDR2);
else if (((au_readl(MEM_STCFG3) & 0x7) == 0x5) && (NAND_CS == 3))
mem_staddr = au_readl(MEM_STADDR3);
if (mem_staddr == 0x00000000) {
printk("Au1xxx NAND: ERROR WITH NAND CHIP-SELECT\n");
kfree(au1550_mtd);
return 1;
}
nand_phys = (mem_staddr << 4) & 0xFFFC0000;
p_nand = (void __iomem *)ioremap(nand_phys, 0x1000);
/* make controller and MTD agree */
if (NAND_CS == 0)
nand_width = au_readl(MEM_STCFG0) & (1<<22);
if (NAND_CS == 1)
nand_width = au_readl(MEM_STCFG1) & (1<<22);
if (NAND_CS == 2)
nand_width = au_readl(MEM_STCFG2) & (1<<22);
if (NAND_CS == 3)
nand_width = au_readl(MEM_STCFG3) & (1<<22);
/* Set address of hardware control function */
this->hwcontrol = au1550_hwcontrol;
this->dev_ready = au1550_device_ready;
/* 30 us command delay time */
this->chip_delay = 30;
this->eccmode = NAND_ECC_SOFT;
this->options = NAND_NO_AUTOINCR;
if (!nand_width)
this->options |= NAND_BUSWIDTH_16;
this->read_byte = (!nand_width) ? au_read_byte16 : au_read_byte;
this->write_byte = (!nand_width) ? au_write_byte16 : au_write_byte;
this->write_word = au_write_word;
this->read_word = au_read_word;
this->write_buf = (!nand_width) ? au_write_buf16 : au_write_buf;
this->read_buf = (!nand_width) ? au_read_buf16 : au_read_buf;
this->verify_buf = (!nand_width) ? au_verify_buf16 : au_verify_buf;
/* Scan to find existence of the device */
if (nand_scan (au1550_mtd, 1)) {
retval = -ENXIO;
goto outio;
}
/* Register the partitions */
add_mtd_partitions(au1550_mtd, partition_info, NB_OF(partition_info));
return 0;
outio:
iounmap ((void *)p_nand);
outmem:
kfree (au1550_mtd);
return retval;
}
module_init(au1xxx_nand_init);
/*
* Clean up routine
*/
#ifdef MODULE
static void __exit au1550_cleanup (void)
{
struct nand_chip *this = (struct nand_chip *) &au1550_mtd[1];
/* Release resources, unregister device */
nand_release (au1550_mtd);
/* Free the MTD device structure */
kfree (au1550_mtd);
/* Unmap */
iounmap ((void *)p_nand);
}
module_exit(au1550_cleanup);
#endif
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Embedded Edge, LLC");
MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on Pb1550 board");
Reference in New Issue View Git Blame Copy Permalink