kernel-ark/drivers/scsi/qla2xxx/qla_inline.h
Chad Dupuis 642ef98386 [SCSI] qla2xxx: Add ha->max_fibre_devices to keep track of the maximum number of targets.
Add a field to the qla_hw_data struct to allow us to set the maximum number of
fabric devices on a per adapter basis based on ISP type.

[jejb: fix up missing rval = QLA_SUCCESS to prevent uninit var warning]
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-02-19 08:33:13 -06:00

190 lines
4.2 KiB
C

/*
* QLogic Fibre Channel HBA Driver
* Copyright (c) 2003-2011 QLogic Corporation
*
* See LICENSE.qla2xxx for copyright and licensing details.
*/
/*
* qla2x00_debounce_register
* Debounce register.
*
* Input:
* port = register address.
*
* Returns:
* register value.
*/
static __inline__ uint16_t
qla2x00_debounce_register(volatile uint16_t __iomem *addr)
{
volatile uint16_t first;
volatile uint16_t second;
do {
first = RD_REG_WORD(addr);
barrier();
cpu_relax();
second = RD_REG_WORD(addr);
} while (first != second);
return (first);
}
static inline void
qla2x00_poll(struct rsp_que *rsp)
{
unsigned long flags;
struct qla_hw_data *ha = rsp->hw;
local_irq_save(flags);
if (IS_QLA82XX(ha))
qla82xx_poll(0, rsp);
else
ha->isp_ops->intr_handler(0, rsp);
local_irq_restore(flags);
}
static inline uint8_t *
host_to_fcp_swap(uint8_t *fcp, uint32_t bsize)
{
uint32_t *ifcp = (uint32_t *) fcp;
uint32_t *ofcp = (uint32_t *) fcp;
uint32_t iter = bsize >> 2;
for (; iter ; iter--)
*ofcp++ = swab32(*ifcp++);
return fcp;
}
static inline int
qla2x00_is_reserved_id(scsi_qla_host_t *vha, uint16_t loop_id)
{
struct qla_hw_data *ha = vha->hw;
if (IS_FWI2_CAPABLE(ha))
return (loop_id > NPH_LAST_HANDLE);
return ((loop_id > ha->max_loop_id && loop_id < SNS_FIRST_LOOP_ID) ||
loop_id == MANAGEMENT_SERVER || loop_id == BROADCAST);
}
static inline void
qla2x00_clean_dsd_pool(struct qla_hw_data *ha, srb_t *sp)
{
struct dsd_dma *dsd_ptr, *tdsd_ptr;
struct crc_context *ctx;
ctx = (struct crc_context *)GET_CMD_CTX_SP(sp);
/* clean up allocated prev pool */
list_for_each_entry_safe(dsd_ptr, tdsd_ptr,
&ctx->dsd_list, list) {
dma_pool_free(ha->dl_dma_pool, dsd_ptr->dsd_addr,
dsd_ptr->dsd_list_dma);
list_del(&dsd_ptr->list);
kfree(dsd_ptr);
}
INIT_LIST_HEAD(&ctx->dsd_list);
}
static inline void
qla2x00_set_fcport_state(fc_port_t *fcport, int state)
{
int old_state;
old_state = atomic_read(&fcport->state);
atomic_set(&fcport->state, state);
/* Don't print state transitions during initial allocation of fcport */
if (old_state && old_state != state) {
ql_dbg(ql_dbg_disc, fcport->vha, 0x207d,
"FCPort state transitioned from %s to %s - "
"portid=%02x%02x%02x.\n",
port_state_str[old_state], port_state_str[state],
fcport->d_id.b.domain, fcport->d_id.b.area,
fcport->d_id.b.al_pa);
}
}
static inline int
qla2x00_hba_err_chk_enabled(srb_t *sp)
{
/*
* Uncomment when corresponding SCSI changes are done.
*
if (!sp->cmd->prot_chk)
return 0;
*
*/
switch (scsi_get_prot_op(GET_CMD_SP(sp))) {
case SCSI_PROT_READ_STRIP:
case SCSI_PROT_WRITE_INSERT:
if (ql2xenablehba_err_chk >= 1)
return 1;
break;
case SCSI_PROT_READ_PASS:
case SCSI_PROT_WRITE_PASS:
if (ql2xenablehba_err_chk >= 2)
return 1;
break;
case SCSI_PROT_READ_INSERT:
case SCSI_PROT_WRITE_STRIP:
return 1;
}
return 0;
}
static inline int
qla2x00_reset_active(scsi_qla_host_t *vha)
{
scsi_qla_host_t *base_vha = pci_get_drvdata(vha->hw->pdev);
/* Test appropriate base-vha and vha flags. */
return test_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags) ||
test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags) ||
test_bit(ISP_ABORT_RETRY, &base_vha->dpc_flags) ||
test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags);
}
static inline srb_t *
qla2x00_get_sp(scsi_qla_host_t *vha, fc_port_t *fcport, gfp_t flag)
{
srb_t *sp = NULL;
struct qla_hw_data *ha = vha->hw;
uint8_t bail;
QLA_VHA_MARK_BUSY(vha, bail);
if (unlikely(bail))
return NULL;
sp = mempool_alloc(ha->srb_mempool, flag);
if (!sp)
goto done;
memset(sp, 0, sizeof(*sp));
sp->fcport = fcport;
sp->iocbs = 1;
done:
if (!sp)
QLA_VHA_MARK_NOT_BUSY(vha);
return sp;
}
static inline void
qla2x00_init_timer(srb_t *sp, unsigned long tmo)
{
init_timer(&sp->u.iocb_cmd.timer);
sp->u.iocb_cmd.timer.expires = jiffies + tmo * HZ;
sp->u.iocb_cmd.timer.data = (unsigned long)sp;
sp->u.iocb_cmd.timer.function = qla2x00_sp_timeout;
add_timer(&sp->u.iocb_cmd.timer);
sp->free = qla2x00_sp_free;
}
static inline int
qla2x00_gid_list_size(struct qla_hw_data *ha)
{
return sizeof(struct gid_list_info) * ha->max_fibre_devices;
}