kernel-ark/drivers/s390/cio/blacklist.c
Arjan van de Ven d54b1fdb1d [PATCH] mark struct file_operations const 5
Many struct file_operations in the kernel can be "const".  Marking them const
moves these to the .rodata section, which avoids false sharing with potential
dirty data.  In addition it'll catch accidental writes at compile time to
these shared resources.

Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:45 -08:00

393 lines
9.1 KiB
C

/*
* drivers/s390/cio/blacklist.c
* S/390 common I/O routines -- blacklisting of specific devices
*
* Copyright (C) 1999-2002 IBM Deutschland Entwicklung GmbH,
* IBM Corporation
* Author(s): Ingo Adlung (adlung@de.ibm.com)
* Cornelia Huck (cornelia.huck@de.ibm.com)
* Arnd Bergmann (arndb@de.ibm.com)
*/
#include <linux/init.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/ctype.h>
#include <linux/device.h>
#include <asm/cio.h>
#include <asm/uaccess.h>
#include "blacklist.h"
#include "cio.h"
#include "cio_debug.h"
#include "css.h"
/*
* "Blacklisting" of certain devices:
* Device numbers given in the commandline as cio_ignore=... won't be known
* to Linux.
*
* These can be single devices or ranges of devices
*/
/* 65536 bits for each set to indicate if a devno is blacklisted or not */
#define __BL_DEV_WORDS ((__MAX_SUBCHANNEL + (8*sizeof(long) - 1)) / \
(8*sizeof(long)))
static unsigned long bl_dev[__MAX_SSID + 1][__BL_DEV_WORDS];
typedef enum {add, free} range_action;
/*
* Function: blacklist_range
* (Un-)blacklist the devices from-to
*/
static void
blacklist_range (range_action action, unsigned int from, unsigned int to,
unsigned int ssid)
{
if (!to)
to = from;
if (from > to || to > __MAX_SUBCHANNEL || ssid > __MAX_SSID) {
printk (KERN_WARNING "Invalid blacklist range "
"0.%x.%04x to 0.%x.%04x, skipping\n",
ssid, from, ssid, to);
return;
}
for (; from <= to; from++) {
if (action == add)
set_bit (from, bl_dev[ssid]);
else
clear_bit (from, bl_dev[ssid]);
}
}
/*
* Function: blacklist_busid
* Get devno/busid from given string.
* Shamelessly grabbed from dasd_devmap.c.
*/
static int
blacklist_busid(char **str, int *id0, int *ssid, int *devno)
{
int val, old_style;
char *sav;
sav = *str;
/* check for leading '0x' */
old_style = 0;
if ((*str)[0] == '0' && (*str)[1] == 'x') {
*str += 2;
old_style = 1;
}
if (!isxdigit((*str)[0])) /* We require at least one hex digit */
goto confused;
val = simple_strtoul(*str, str, 16);
if (old_style || (*str)[0] != '.') {
*id0 = *ssid = 0;
if (val < 0 || val > 0xffff)
goto confused;
*devno = val;
if ((*str)[0] != ',' && (*str)[0] != '-' &&
(*str)[0] != '\n' && (*str)[0] != '\0')
goto confused;
return 0;
}
/* New style x.y.z busid */
if (val < 0 || val > 0xff)
goto confused;
*id0 = val;
(*str)++;
if (!isxdigit((*str)[0])) /* We require at least one hex digit */
goto confused;
val = simple_strtoul(*str, str, 16);
if (val < 0 || val > 0xff || (*str)++[0] != '.')
goto confused;
*ssid = val;
if (!isxdigit((*str)[0])) /* We require at least one hex digit */
goto confused;
val = simple_strtoul(*str, str, 16);
if (val < 0 || val > 0xffff)
goto confused;
*devno = val;
if ((*str)[0] != ',' && (*str)[0] != '-' &&
(*str)[0] != '\n' && (*str)[0] != '\0')
goto confused;
return 0;
confused:
strsep(str, ",\n");
printk(KERN_WARNING "Invalid cio_ignore parameter '%s'\n", sav);
return 1;
}
static int
blacklist_parse_parameters (char *str, range_action action)
{
int from, to, from_id0, to_id0, from_ssid, to_ssid;
while (*str != 0 && *str != '\n') {
range_action ra = action;
while(*str == ',')
str++;
if (*str == '!') {
ra = !action;
++str;
}
/*
* Since we have to parse the proc commands and the
* kernel arguments we have to check four cases
*/
if (strncmp(str,"all,",4) == 0 || strcmp(str,"all") == 0 ||
strncmp(str,"all\n",4) == 0 || strncmp(str,"all ",4) == 0) {
int j;
str += 3;
for (j=0; j <= __MAX_SSID; j++)
blacklist_range(ra, 0, __MAX_SUBCHANNEL, j);
} else {
int rc;
rc = blacklist_busid(&str, &from_id0,
&from_ssid, &from);
if (rc)
continue;
to = from;
to_id0 = from_id0;
to_ssid = from_ssid;
if (*str == '-') {
str++;
rc = blacklist_busid(&str, &to_id0,
&to_ssid, &to);
if (rc)
continue;
}
if (*str == '-') {
printk(KERN_WARNING "invalid cio_ignore "
"parameter '%s'\n",
strsep(&str, ",\n"));
continue;
}
if ((from_id0 != to_id0) ||
(from_ssid != to_ssid)) {
printk(KERN_WARNING "invalid cio_ignore range "
"%x.%x.%04x-%x.%x.%04x\n",
from_id0, from_ssid, from,
to_id0, to_ssid, to);
continue;
}
pr_debug("blacklist_setup: adding range "
"from %x.%x.%04x to %x.%x.%04x\n",
from_id0, from_ssid, from, to_id0, to_ssid, to);
blacklist_range (ra, from, to, to_ssid);
}
}
return 1;
}
/* Parsing the commandline for blacklist parameters, e.g. to blacklist
* bus ids 0.0.1234, 0.0.1235 and 0.0.1236, you could use any of:
* - cio_ignore=1234-1236
* - cio_ignore=0x1234-0x1235,1236
* - cio_ignore=0x1234,1235-1236
* - cio_ignore=1236 cio_ignore=1234-0x1236
* - cio_ignore=1234 cio_ignore=1236 cio_ignore=0x1235
* - cio_ignore=0.0.1234-0.0.1236
* - cio_ignore=0.0.1234,0x1235,1236
* - ...
*/
static int __init
blacklist_setup (char *str)
{
CIO_MSG_EVENT(6, "Reading blacklist parameters\n");
return blacklist_parse_parameters (str, add);
}
__setup ("cio_ignore=", blacklist_setup);
/* Checking if devices are blacklisted */
/*
* Function: is_blacklisted
* Returns 1 if the given devicenumber can be found in the blacklist,
* otherwise 0.
* Used by validate_subchannel()
*/
int
is_blacklisted (int ssid, int devno)
{
return test_bit (devno, bl_dev[ssid]);
}
#ifdef CONFIG_PROC_FS
/*
* Function: blacklist_parse_proc_parameters
* parse the stuff which is piped to /proc/cio_ignore
*/
static void
blacklist_parse_proc_parameters (char *buf)
{
if (strncmp (buf, "free ", 5) == 0) {
blacklist_parse_parameters (buf + 5, free);
} else if (strncmp (buf, "add ", 4) == 0) {
/*
* We don't need to check for known devices since
* css_probe_device will handle this correctly.
*/
blacklist_parse_parameters (buf + 4, add);
} else {
printk (KERN_WARNING "cio_ignore: Parse error; \n"
KERN_WARNING "try using 'free all|<devno-range>,"
"<devno-range>,...'\n"
KERN_WARNING "or 'add <devno-range>,"
"<devno-range>,...'\n");
return;
}
css_schedule_reprobe();
}
/* Iterator struct for all devices. */
struct ccwdev_iter {
int devno;
int ssid;
int in_range;
};
static void *
cio_ignore_proc_seq_start(struct seq_file *s, loff_t *offset)
{
struct ccwdev_iter *iter;
if (*offset >= (__MAX_SUBCHANNEL + 1) * (__MAX_SSID + 1))
return NULL;
iter = kzalloc(sizeof(struct ccwdev_iter), GFP_KERNEL);
if (!iter)
return ERR_PTR(-ENOMEM);
iter->ssid = *offset / (__MAX_SUBCHANNEL + 1);
iter->devno = *offset % (__MAX_SUBCHANNEL + 1);
return iter;
}
static void
cio_ignore_proc_seq_stop(struct seq_file *s, void *it)
{
if (!IS_ERR(it))
kfree(it);
}
static void *
cio_ignore_proc_seq_next(struct seq_file *s, void *it, loff_t *offset)
{
struct ccwdev_iter *iter;
if (*offset >= (__MAX_SUBCHANNEL + 1) * (__MAX_SSID + 1))
return NULL;
iter = it;
if (iter->devno == __MAX_SUBCHANNEL) {
iter->devno = 0;
iter->ssid++;
if (iter->ssid > __MAX_SSID)
return NULL;
} else
iter->devno++;
(*offset)++;
return iter;
}
static int
cio_ignore_proc_seq_show(struct seq_file *s, void *it)
{
struct ccwdev_iter *iter;
iter = it;
if (!is_blacklisted(iter->ssid, iter->devno))
/* Not blacklisted, nothing to output. */
return 0;
if (!iter->in_range) {
/* First device in range. */
if ((iter->devno == __MAX_SUBCHANNEL) ||
!is_blacklisted(iter->ssid, iter->devno + 1))
/* Singular device. */
return seq_printf(s, "0.%x.%04x\n",
iter->ssid, iter->devno);
iter->in_range = 1;
return seq_printf(s, "0.%x.%04x-", iter->ssid, iter->devno);
}
if ((iter->devno == __MAX_SUBCHANNEL) ||
!is_blacklisted(iter->ssid, iter->devno + 1)) {
/* Last device in range. */
iter->in_range = 0;
return seq_printf(s, "0.%x.%04x\n", iter->ssid, iter->devno);
}
return 0;
}
static ssize_t
cio_ignore_write(struct file *file, const char __user *user_buf,
size_t user_len, loff_t *offset)
{
char *buf;
if (*offset)
return -EINVAL;
if (user_len > 65536)
user_len = 65536;
buf = vmalloc (user_len + 1); /* maybe better use the stack? */
if (buf == NULL)
return -ENOMEM;
if (strncpy_from_user (buf, user_buf, user_len) < 0) {
vfree (buf);
return -EFAULT;
}
buf[user_len] = '\0';
blacklist_parse_proc_parameters (buf);
vfree (buf);
return user_len;
}
static struct seq_operations cio_ignore_proc_seq_ops = {
.start = cio_ignore_proc_seq_start,
.stop = cio_ignore_proc_seq_stop,
.next = cio_ignore_proc_seq_next,
.show = cio_ignore_proc_seq_show,
};
static int
cio_ignore_proc_open(struct inode *inode, struct file *file)
{
return seq_open(file, &cio_ignore_proc_seq_ops);
}
static const struct file_operations cio_ignore_proc_fops = {
.open = cio_ignore_proc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = seq_release,
.write = cio_ignore_write,
};
static int
cio_ignore_proc_init (void)
{
struct proc_dir_entry *entry;
entry = create_proc_entry ("cio_ignore", S_IFREG | S_IRUGO | S_IWUSR,
&proc_root);
if (!entry)
return -ENOENT;
entry->proc_fops = &cio_ignore_proc_fops;
return 0;
}
__initcall (cio_ignore_proc_init);
#endif /* CONFIG_PROC_FS */