kernel-ark/drivers/input/touchscreen/penmount.c
Dmitry Torokhov a5394fb075 Input: touchscreens - switch to using input_dev->dev.parent
In preparation for struct class_device -> struct device input
core conversion, switch to using input_dev->dev.parent when
specifying device position in sysfs tree.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2007-04-12 01:35:14 -04:00

183 lines
3.8 KiB
C

/*
* Penmount serial touchscreen driver
*
* Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>
*
* Based on ELO driver (drivers/input/touchscreen/elo.c)
* Copyright (c) 2004 Vojtech Pavlik
*/
/*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/init.h>
#define DRIVER_DESC "Penmount serial touchscreen driver"
MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
/*
* Definitions & global arrays.
*/
#define PM_MAX_LENGTH 5
/*
* Per-touchscreen data.
*/
struct pm {
struct input_dev *dev;
struct serio *serio;
int idx;
unsigned char data[PM_MAX_LENGTH];
char phys[32];
};
static irqreturn_t pm_interrupt(struct serio *serio,
unsigned char data, unsigned int flags)
{
struct pm *pm = serio_get_drvdata(serio);
struct input_dev *dev = pm->dev;
pm->data[pm->idx] = data;
if (pm->data[0] & 0x80) {
if (PM_MAX_LENGTH == ++pm->idx) {
input_report_abs(dev, ABS_X, pm->data[2] * 128 + pm->data[1]);
input_report_abs(dev, ABS_Y, pm->data[4] * 128 + pm->data[3]);
input_report_key(dev, BTN_TOUCH, !!(pm->data[0] & 0x40));
input_sync(dev);
pm->idx = 0;
}
}
return IRQ_HANDLED;
}
/*
* pm_disconnect() is the opposite of pm_connect()
*/
static void pm_disconnect(struct serio *serio)
{
struct pm *pm = serio_get_drvdata(serio);
input_get_device(pm->dev);
input_unregister_device(pm->dev);
serio_close(serio);
serio_set_drvdata(serio, NULL);
input_put_device(pm->dev);
kfree(pm);
}
/*
* pm_connect() is the routine that is called when someone adds a
* new serio device that supports Gunze protocol and registers it as
* an input device.
*/
static int pm_connect(struct serio *serio, struct serio_driver *drv)
{
struct pm *pm;
struct input_dev *input_dev;
int err;
pm = kzalloc(sizeof(struct pm), GFP_KERNEL);
input_dev = input_allocate_device();
if (!pm || !input_dev) {
err = -ENOMEM;
goto fail1;
}
pm->serio = serio;
pm->dev = input_dev;
snprintf(pm->phys, sizeof(pm->phys), "%s/input0", serio->phys);
input_dev->name = "Penmount Serial TouchScreen";
input_dev->phys = pm->phys;
input_dev->id.bustype = BUS_RS232;
input_dev->id.vendor = SERIO_PENMOUNT;
input_dev->id.product = 0;
input_dev->id.version = 0x0100;
input_dev->dev.parent = &serio->dev;
input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS);
input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH);
input_set_abs_params(pm->dev, ABS_X, 0, 0x3ff, 0, 0);
input_set_abs_params(pm->dev, ABS_Y, 0, 0x3ff, 0, 0);
serio_set_drvdata(serio, pm);
err = serio_open(serio, drv);
if (err)
goto fail2;
err = input_register_device(pm->dev);
if (err)
goto fail3;
return 0;
fail3: serio_close(serio);
fail2: serio_set_drvdata(serio, NULL);
fail1: input_free_device(input_dev);
kfree(pm);
return err;
}
/*
* The serio driver structure.
*/
static struct serio_device_id pm_serio_ids[] = {
{
.type = SERIO_RS232,
.proto = SERIO_PENMOUNT,
.id = SERIO_ANY,
.extra = SERIO_ANY,
},
{ 0 }
};
MODULE_DEVICE_TABLE(serio, pm_serio_ids);
static struct serio_driver pm_drv = {
.driver = {
.name = "penmountlpc",
},
.description = DRIVER_DESC,
.id_table = pm_serio_ids,
.interrupt = pm_interrupt,
.connect = pm_connect,
.disconnect = pm_disconnect,
};
/*
* The functions for inserting/removing us as a module.
*/
static int __init pm_init(void)
{
return serio_register_driver(&pm_drv);
}
static void __exit pm_exit(void)
{
serio_unregister_driver(&pm_drv);
}
module_init(pm_init);
module_exit(pm_exit);