4c9847b737
Improve the binding example by removing all the leading 0x to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
Converted using the following command:
find Documentation/devicetree/bindings -name "*.txt" -exec sed -i -e 's/([^ ])\@0x([0-9a-f])/$1\@$2/g' {} +
This is a follow up to commit 48c926cd34
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Rob Herring <robh@kernel.org>
110 lines
2.1 KiB
Plaintext
110 lines
2.1 KiB
Plaintext
CSR SiRFatlas7 pinmux controller
|
|
|
|
Required properties:
|
|
- compatible : "sirf,atlas7-ioc"
|
|
- reg : Address range of the pinctrl registers
|
|
|
|
For example, pinctrl might have properties like the following:
|
|
pinctrl: ioc@18880000 {
|
|
compatible = "sirf,atlas7-ioc";
|
|
reg = <0x18880000 0x1000>;
|
|
|
|
a_ac97_pmx: ac97@0 {
|
|
ac97 {
|
|
groups = "audio_ac97_grp";
|
|
function = "audio_ac97";
|
|
};
|
|
};
|
|
|
|
...
|
|
|
|
sd2_pmx: sd2@0 {
|
|
sd2 {
|
|
groups = "sd2_grp0";
|
|
function = "sd2";
|
|
};
|
|
};
|
|
|
|
...
|
|
|
|
|
|
sample0_cfg: sample0@0 {
|
|
sample0 {
|
|
pins = "ldd_0", "ldd_1";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
sample1_cfg: sample1@0 {
|
|
sample1 {
|
|
pins = "ldd_2", "ldd_3";
|
|
input-schmitt-enable;
|
|
};
|
|
};
|
|
|
|
sample2_cfg: sample2@0 {
|
|
sample2 {
|
|
groups = "uart4_nopause_grp";
|
|
bias-pull-down;
|
|
};
|
|
};
|
|
|
|
sample3_cfg: sample3@0 {
|
|
sample3 {
|
|
pins = "ldd_4", "ldd_5";
|
|
drive-strength = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
Please refer to pinctrl-bindings.txt in this directory for details of the common
|
|
pinctrl bindings used by client devices.
|
|
|
|
SiRFatlas7's pinmux nodes act as a container for an abitrary number of subnodes.
|
|
Each of these subnodes represents some desired configuration for a group of pins.
|
|
|
|
Required subnode-properties:
|
|
- groups : An array of strings. Each string contains the name of a group.
|
|
- function: A string containing the name of the function to mux to the
|
|
group.
|
|
|
|
Valid values for group and function names can be found from looking at the
|
|
group and function arrays in driver files:
|
|
drivers/pinctrl/pinctrl-sirf.c
|
|
|
|
For example, pinctrl might have subnodes like the following:
|
|
sd0_pmx: sd0@0 {
|
|
sd0 {
|
|
groups = "sd0_grp";
|
|
function = "sd0";
|
|
};
|
|
};
|
|
|
|
sd1_pmx0: sd1@0 {
|
|
sd1 {
|
|
groups = "sd1_grp0";
|
|
function = "sd1_m0";
|
|
};
|
|
};
|
|
|
|
sd1_pmx1: sd1@1 {
|
|
sd1 {
|
|
groups = "sd1_grp1";
|
|
function = "sd1_m1";
|
|
};
|
|
};
|
|
|
|
For a specific board, if it wants to use sd1,
|
|
it can add the following to its board-specific .dts file.
|
|
sd1: sd@12340000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd1_pmx0>;
|
|
}
|
|
|
|
or
|
|
|
|
sd1: sd@12340000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sd1_pmx1>;
|
|
}
|