| .. |
|
include/mach
|
[ARM] pxa: add basic support for HP iPAQ hx4700 PDAs
|
2009-06-05 10:40:31 +08:00 |
|
am200epd.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
am300epd.c
|
[ARM] 5354/1: mach-pxa: add AM300 platform driver v3
|
2009-02-10 11:28:00 +00:00 |
|
clock.c
|
[ARM] pxa: make second argument of clk_add_alias a name instead of the device
|
2009-03-19 16:20:39 +08:00 |
|
clock.h
|
[ARM] pxa: make second argument of clk_add_alias a name instead of the device
|
2009-03-19 16:20:39 +08:00 |
|
cm-x2xx-pci.c
|
[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h
|
2009-03-09 21:22:38 +08:00 |
|
cm-x2xx-pci.h
|
[ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255
|
2008-10-07 12:05:05 +01:00 |
|
cm-x2xx.c
|
[ARM] pxa/cm-x2xx: fix ucb1400 not being registered
|
2009-04-04 10:26:34 +08:00 |
|
cm-x255.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
cm-x270.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
cm-x300.c
|
[ARM] pxa: move mach/i2c.h to plat/i2c.h
|
2009-06-05 10:32:01 +08:00 |
|
colibri-pxa3xx.c
|
[ARM] pxa/colibri: provide MAC address from ATAG_SERIAL
|
2009-04-04 10:26:34 +08:00 |
|
colibri-pxa270.c
|
[ARM] pxa: rename colibri.c to colibri-pxa270.c
|
2009-03-23 09:57:54 +08:00 |
|
colibri-pxa300.c
|
[ARM] pxa/colibri: get rid of set_irq_type()
|
2009-04-04 10:26:34 +08:00 |
|
colibri-pxa320.c
|
[ARM] pxa/colibri: get rid of set_irq_type()
|
2009-04-04 10:26:34 +08:00 |
|
corgi_lcd.c
|
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
|
2009-03-09 21:22:40 +08:00 |
|
corgi_pm.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
corgi_ssp.c
|
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
|
2009-03-09 21:22:40 +08:00 |
|
corgi.c
|
[ARM] pxa: update pxa2xx_spi_chip initialization to use .gpio_cs field
|
2009-06-05 10:32:06 +08:00 |
|
cpufreq-pxa2xx.c
|
[ARM] pxa: add vcc_core regulation for cpufreq on pxa2xx
|
2009-06-05 10:33:07 +08:00 |
|
cpufreq-pxa3xx.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
csb701.c
|
[ARM] pxa/csb701: do not register devices on non-csb726 boads
|
2009-04-04 10:26:35 +08:00 |
|
csb726.c
|
[ARM] pxa/csb726: register ac97 controller
|
2009-06-05 10:41:23 +08:00 |
|
devices.c
|
[ARM] pxa: move mach/i2c.h to plat/i2c.h
|
2009-06-05 10:32:01 +08:00 |
|
devices.h
|
[ARM] pxa: add resources for incoming rtc-pxa driver
|
2008-12-02 14:43:47 +08:00 |
|
e330.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
e350.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
e400.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
e740.c
|
[ARM] pxa: register AC97 controller devices
|
2009-04-04 21:54:40 +08:00 |
|
e750.c
|
[ARM] pxa: register AC97 controller devices
|
2009-04-04 21:54:40 +08:00 |
|
e800.c
|
[ARM] pxa: register AC97 controller devices
|
2009-04-04 21:54:40 +08:00 |
|
em-x270.c
|
[ARM] pxa: move mach/i2c.h to plat/i2c.h
|
2009-06-05 10:32:01 +08:00 |
|
eseries.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
eseries.h
|
[ARM] pxa: Add multi-io support for e-series
|
2008-12-15 03:29:34 +00:00 |
|
ezx.c
|
[ARM] pxa: move mach/i2c.h to plat/i2c.h
|
2009-06-05 10:32:01 +08:00 |
|
generic.c
|
[ARM] pxa: move GPIO register definitions into <mach/gpio.h>
|
2009-03-09 21:22:37 +08:00 |
|
generic.h
|
[ARM] pxa: add missing declaration of pxa26x_init_irq()
|
2009-04-13 12:10:36 +08:00 |
|
gumstix.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
h5000.c
|
Merge branch 'origin' into devel
|
2009-03-28 20:29:51 +00:00 |
|
himalaya.c
|
[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h
|
2009-03-09 21:22:38 +08:00 |
|
hx4700.c
|
[ARM] pxa: add basic support for HP iPAQ hx4700 PDAs
|
2009-06-05 10:40:31 +08:00 |
|
idp.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
imote2.c
|
[ARM] pxa: update pxa2xx_spi_chip initialization to use .gpio_cs field
|
2009-06-05 10:32:06 +08:00 |
|
irq.c
|
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
|
2009-03-09 21:22:40 +08:00 |
|
Kconfig
|
[ARM] pxa: add basic support for HP iPAQ hx4700 PDAs
|
2009-06-05 10:40:31 +08:00 |
|
leds-idp.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
leds-lubbock.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
leds-mainstone.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
leds.c
|
[ARM] 5251/1: remove old LED support for Trizeps4 SOM
|
2008-10-01 22:34:34 +01:00 |
|
leds.h
|
fix file specification in comments
|
2006-10-03 23:01:26 +02:00 |
|
littleton.c
|
[ARM] pxa: update pxa2xx_spi_chip initialization to use .gpio_cs field
|
2009-06-05 10:32:06 +08:00 |
|
lpd270.c
|
[ARM] pxa: move GPIO register definitions into <mach/gpio.h>
|
2009-03-09 21:22:37 +08:00 |
|
lubbock.c
|
[ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c
|
2009-03-09 21:22:40 +08:00 |
|
magician.c
|
[ARM] pxa/magician: use ARRAY_AND_SIZE for platform_add_devices
|
2009-06-05 10:39:39 +08:00 |
|
mainstone.c
|
[ARM] pxa: move mach/i2c.h to plat/i2c.h
|
2009-06-05 10:32:01 +08:00 |
|
Makefile
|
[ARM] pxa: add basic support for HP iPAQ hx4700 PDAs
|
2009-06-05 10:40:31 +08:00 |
|
Makefile.boot
|
|
|
|
mfp-pxa2xx.c
|
[ARM] pxa: enable GPIO receivers after configuring pins
|
2009-05-18 21:52:09 +08:00 |
|
mfp-pxa3xx.c
|
[ARM] pxa: move common MFP handling code into plat-pxa
|
2009-03-23 10:11:34 +08:00 |
|
mioa701_bootresume.S
|
[ARM] pxa/MioA701: fix memory corruption.
|
2008-11-22 20:57:21 +08:00 |
|
mioa701.c
|
[ARM] pxa: move mach/i2c.h to plat/i2c.h
|
2009-06-05 10:32:01 +08:00 |
|
mp900.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
palmld.c
|
[ARM] pxa/palm: fix PalmLD/T5/TX AC97 MFP
|
2009-05-22 18:16:20 +08:00 |
|
palmt5.c
|
[ARM] pxa/palm: Switch PalmT5, TX, TE2 to GPIO VBUS
|
2009-06-05 10:41:48 +08:00 |
|
palmte2.c
|
[ARM] pxa/palm: Switch PalmT5, TX, TE2 to GPIO VBUS
|
2009-06-05 10:41:48 +08:00 |
|
palmtx.c
|
[ARM] pxa/palm: Switch PalmT5, TX, TE2 to GPIO VBUS
|
2009-06-05 10:41:48 +08:00 |
|
palmz72.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
pcm027.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
pcm990-baseboard.c
|
[ARM] pxa: move mach/i2c.h to plat/i2c.h
|
2009-06-05 10:32:01 +08:00 |
|
pm.c
|
[ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c
|
2009-03-09 21:22:40 +08:00 |
|
poodle.c
|
[ARM] pxa: update pxa2xx_spi_chip initialization to use .gpio_cs field
|
2009-06-05 10:32:06 +08:00 |
|
pxa2xx.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
pxa3xx.c
|
[ARM] pxa: add udc support for pxa3xx
|
2009-06-05 10:32:34 +08:00 |
|
pxa25x.c
|
[ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c
|
2009-03-09 21:22:37 +08:00 |
|
pxa27x.c
|
[ARM] pxa: add ability to set suspend mode
|
2009-06-05 10:32:48 +08:00 |
|
pxa300.c
|
[ARM] pxa: move common MFP handling code into plat-pxa
|
2009-03-23 10:11:34 +08:00 |
|
pxa320.c
|
[ARM] pxa: move common MFP handling code into plat-pxa
|
2009-03-23 10:11:34 +08:00 |
|
pxa930.c
|
[ARM] pxa: move common MFP handling code into plat-pxa
|
2009-03-23 10:11:34 +08:00 |
|
reset.c
|
[ARM] pxa: allow gpio_reset drive high during normal work
|
2009-05-18 21:52:09 +08:00 |
|
saar.c
|
[ARM] pxa: move mach/i2c.h to plat/i2c.h
|
2009-06-05 10:32:01 +08:00 |
|
sharpsl_pm.c
|
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
|
2009-03-09 21:22:40 +08:00 |
|
sharpsl.h
|
[ARM] 4737/1: Refactor corgi_lcd to improve readability + bugfix
|
2008-01-28 13:13:25 +00:00 |
|
sleep.S
|
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
|
2009-03-09 21:22:40 +08:00 |
|
smemc.c
|
[ARM] pxa: avoid polluting the kernel's namespace
|
2008-11-28 16:04:54 +00:00 |
|
spitz_pm.c
|
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
|
2009-03-09 21:22:40 +08:00 |
|
spitz.c
|
[ARM] pxa: update pxa2xx_spi_chip initialization to use .gpio_cs field
|
2009-06-05 10:32:06 +08:00 |
|
ssp.c
|
[ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h
|
2009-03-09 21:22:38 +08:00 |
|
standby.S
|
[ARM] pxa: separate definitions from pxa-regs.h and remove it finally
|
2009-03-09 21:22:40 +08:00 |
|
tavorevb.c
|
[ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage
|
2009-03-09 21:22:36 +08:00 |
|
time.c
|
clocksource: pass clocksource to read() callback
|
2009-04-21 13:41:47 -07:00 |
|
tosa-bt.c
|
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
|
2008-08-07 09:55:48 +01:00 |
|
tosa.c
|
[ARM] pxa: move mach/i2c.h to plat/i2c.h
|
2009-06-05 10:32:01 +08:00 |
|
trizeps4.c
|
[ARM] pxa: move mach/i2c.h to plat/i2c.h
|
2009-06-05 10:32:01 +08:00 |
|
viper.c
|
[ARM] pxa: move mach/i2c.h to plat/i2c.h
|
2009-06-05 10:32:01 +08:00 |
|
zylonite_pxa300.c
|
[ARM] pxa: move mach/i2c.h to plat/i2c.h
|
2009-06-05 10:32:01 +08:00 |
|
zylonite_pxa320.c
|
[ARM] pxa/zylonite: fix the issue of unused SDATA_IN_1 pin get AC97 not working
|
2009-04-27 11:46:30 +08:00 |
|
zylonite.c
|
[ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h>
|
2008-12-02 14:42:37 +08:00 |
8768dc9b75