davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
86c79bf45f
kernel-ark/arch/arm/mach-omap2
History
R Sricharan 86c79bf45f omap2+: mux: Remove the use of IDLE flag 
Currently OMAP_DEVICE_PAD_IDLE flag is used to mux pins
dynamically. This can be simplified by using the enabled
state variable of each pad. This also fixes the issue of
the static pads not getting muxed after idling and
disable/enable state transitions.

Signed-off-by: sricharan <r.sricharan@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-03-11 11:32:25 -08:00
..
include/mach Merge branch 'for_2.6.39/pm-misc' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus 2011-03-10 18:54:14 -08:00
board-2430sdp.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
board-3430sdp.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
board-3630sdp.c omap2+: Minimize board specific init_early calls 2011-02-25 10:19:21 -08:00
board-4430sdp.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
board-am3517crane.c omap2+: Minimize board specific init_early calls 2011-02-25 10:19:21 -08:00
board-am3517evm.c audio : AM3517 : Adding i2c info for AIC23 codec 2011-03-08 15:20:41 -08:00
board-apollon.c omap2+: Minimize board specific init_early calls 2011-02-25 10:19:21 -08:00
board-cm-t35.c omap2+: Minimize board specific init_early calls 2011-02-25 10:19:21 -08:00
board-cm-t3517.c omap2+: Minimize board specific init_early calls 2011-02-25 10:19:21 -08:00
board-devkit8000.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
board-flash.c omap: Fix compile if MTD_NAND_OMAP2 is not selected 2011-02-25 10:19:21 -08:00
board-flash.h omap3630: nand: fix device size to work in polled mode 2011-02-17 15:32:52 -08:00
board-generic.c omap2+: Minimize board specific init_early calls 2011-02-25 10:19:21 -08:00
board-h4.c omap2+: Minimize board specific init_early calls 2011-02-25 10:19:21 -08:00
board-igep0020.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
board-igep0030.c OMAP: hsmmc: Rename the device and driver 2011-03-01 13:13:27 -08:00
board-ldp.c ldp: Fix regulator mapping for ads7846 TS controller 2011-03-02 16:45:50 -08:00
board-n8x0.c omap: mmc: split out init for 2420 2011-03-01 13:12:55 -08:00
board-omap3beagle.c Merge branch 'for_2.6.39/pm-misc' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus 2011-03-10 18:54:14 -08:00
board-omap3evm.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
board-omap3logic.c ARM: OMAP2: use early init hook 2011-02-14 15:40:20 -08:00
board-omap3pandora.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
board-omap3stalker.c omap: Remove unnecessary twl4030_codec_audio settings from board files 2011-03-02 17:01:14 -08:00
board-omap3touchbook.c omap: Remove unnecessary twl4030_codec_audio settings from board files 2011-03-02 17:01:14 -08:00
board-omap4panda.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
board-overo.c omap: Remove unnecessary twl4030_codec_audio settings from board files 2011-03-02 17:01:14 -08:00
board-rm680.c OMAP: hsmmc: Rename the device and driver 2011-03-01 13:13:27 -08:00
board-rx51-peripherals.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
board-rx51-video.c OMAP2, 3: DSS2: board files: replace platform_device_register with omap_display_init() 2011-02-23 09:34:25 +02:00
board-rx51.c omap2+: Minimize board specific init_early calls 2011-02-25 10:19:21 -08:00
board-ti8168evm.c omap2+: Minimize board specific init_early calls 2011-02-25 10:19:21 -08:00
board-zoom-debugboard.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-zoom-display.c OMAP2, 3: DSS2: board files: replace platform_device_register with omap_display_init() 2011-02-23 09:34:25 +02:00
board-zoom-peripherals.c Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
board-zoom.c omap3630: nand: fix device size to work in polled mode 2011-02-17 15:32:52 -08:00
clkt2xxx_apll.c OMAP2xxx: clock: add clockfw autoidle support for APLLs 2011-03-07 20:02:13 -07:00
clkt2xxx_dpll.c OMAP2: clock: add DPLL autoidle support 2011-03-07 20:02:05 -07:00
clkt2xxx_dpllcore.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt2xxx_osc.c OMAP2+: clock: comment that osc_ck/osc_sys_ck should use clockfw autoidle control 2011-03-07 20:02:21 -07:00
clkt2xxx_sys.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clkt2xxx_virt_prcm_set.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
clkt34xx_dpll3m2.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clkt_clksel.c arm: omap2: clksel: fix compile warningOrganization: Texas Instruments\n 2011-02-16 17:49:35 -08:00
clkt_dpll.c Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024 2011-03-10 22:41:28 -07:00
clkt_iclk.c OMAP2430/3xxx: clock: add modem clock autoidle support 2011-03-07 20:03:12 -07:00
clock2xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock2xxx.h OMAP: clock: fix compile warning 2011-03-09 18:44:28 -07:00
clock3xxx_data.c Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024 2011-03-10 22:41:28 -07:00
clock3xxx.c OMAP2+: clock: disable autoidle on all clocks during clock init 2011-02-25 16:10:42 -07:00
clock3xxx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.c OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks 2011-03-07 20:04:03 -07:00
clock34xx.h OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks 2011-03-07 20:04:03 -07:00
clock36xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx_data.c Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024 2011-03-10 22:41:28 -07:00
clock44xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock2420_data.c OMAP2xxx: clock data: clean up some comments 2011-03-07 20:21:17 -07:00
clock2430_data.c Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024 2011-03-10 22:41:28 -07:00
clock2430.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
clock3517.c OMAP3: clock: use autoidle clkops for all autoidle-controllable interface clocks 2011-03-07 20:04:03 -07:00
clock3517.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock_common_data.c OMAP2xxx: clock: remove dsp_irate_ick 2011-03-07 20:21:17 -07:00
clock.c perf: add OMAP support for the new power events 2011-03-11 07:21:44 -08:00
clock.h OMAP2xxx: clock: remove dsp_irate_ick 2011-03-07 20:21:17 -07:00
clockdomain2xxx_3xxx.c OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disable 2011-02-25 16:06:48 -07:00
clockdomain44xx.c OMAP4: clockdomain: Add wkup/sleep dependency support 2011-02-25 16:09:05 -07:00
clockdomain.c Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024 2011-03-10 22:41:28 -07:00
clockdomain.h Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024 2011-03-10 22:41:28 -07:00
clockdomains2xxx_3xxx_data.c omap2/3: clockdomains: fix compile-time warnings 2011-03-07 20:21:17 -07:00
clockdomains44xx_data.c Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024 2011-03-10 22:41:28 -07:00
cm1_44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
cm2_44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
cm2xxx_3xxx.c OMAP2xxx: clock: add clockfw autoidle support for APLLs 2011-03-07 20:02:13 -07:00
cm2xxx_3xxx.h OMAP2xxx: clock: add clockfw autoidle support for APLLs 2011-03-07 20:02:13 -07:00
cm44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
cm44xx.h OMAP4: clockdomain: Add wkup/sleep dependency support 2011-02-25 16:09:05 -07:00
cm-regbits-24xx.h OMAP2420: clock: use autoidle clkops for all autoidle-controllable interface clocks 2011-03-07 20:02:57 -07:00
cm-regbits-34xx.h OMAP4: clockdomains: add OMAP4 PRCM data and OMAP4 support 2010-12-21 21:05:15 -07:00
cm-regbits-44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cm.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
cminst44xx.c OMAP4: CM: Add CM accesor api for bitwise control 2011-02-25 16:09:05 -07:00
cminst44xx.h OMAP4: CM: Add CM accesor api for bitwise control 2011-02-25 16:09:05 -07:00
common.c Merge branch 'for_2.6.39/pm-misc' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus 2011-03-10 18:54:14 -08:00
control.c OMAP3: control/PM: move padconf save code to mach-omap2/control.c 2010-12-21 21:05:16 -07:00
control.h TI816X: Update common OMAP machine specific sources 2011-02-16 08:31:39 -08:00
cpuidle34xx.c Merge branch 'integration-2.6.39-for-tony' of git://git.pwsan.com/linux-integration into omap-for-linus 2011-03-11 09:20:03 -08:00
devices.c OMAP4: Initialise the l3 device with the hwmod data. 2011-03-09 17:23:57 +05:30
display.c OMAP2, 3: DSS2: Create new file display.c for central dss driver registration. 2011-02-23 09:33:27 +02:00
dma.c arch/arm/mach-omap2/dma.c: Convert IS_ERR result to PTR_ERR 2011-01-27 16:25:35 -08:00
dpll3xxx.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-01-06 19:13:58 -08:00
dpll44xx.c omap4: dpll: Enable auto gate control for all MX postdividers 2011-02-25 16:10:17 -07:00
dsp.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
emu.c omap2/3: Fix initcalls for multi-omap 2010-02-15 09:27:05 -08:00
gpio.c OMAP2+: GPIO: device registration 2010-12-07 16:26:57 -08:00
gpmc-nand.c omap3630: nand: fix device size to work in polled mode 2011-02-17 15:32:52 -08:00
gpmc-onenand.c OMAP: OneNAND: let boards determine OneNAND frequency 2011-02-17 15:44:46 -08:00
gpmc-smc91x.c omap: use smc91x_platdata to setup smc91x 2009-12-11 16:16:33 -08:00
gpmc-smsc911x.c ARM: OMAP3LOGIC: Add generic smsc911x support when connected to GPMC 2010-09-28 11:39:18 -07:00
gpmc.c omap3: nand: configurable fifo threshold to gain the throughput 2011-02-17 15:32:54 -08:00
hsmmc.c OMAP: hsmmc: Rename the device and driver 2011-03-01 13:13:27 -08:00
hsmmc.h Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2010-10-25 13:46:56 -07:00
hwspinlock.c omap: add hwspinlock device 2011-02-17 09:52:43 -08:00
i2c.c omap: mux: Convert 2420 platform init code to use new mux code 2010-07-05 16:31:40 +03:00
id.c omap: Add chip id recognition for OMAP4 ES2.1 and ES2.2 2011-02-17 16:16:35 -08:00
io.c Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024 2011-03-10 22:41:28 -07:00
io.h OMAP: plat-omap: Fix static function warnings 2010-10-08 10:12:38 -07:00
iommu2.c omap: IOMMU: add support to callback during fault handling 2011-02-24 14:23:17 -08:00
irq.c Merge branches 'devel-cleanup', 'devel-board', 'devel-early-init' and 'devel-ti816x' into omap-for-linus 2011-02-16 11:32:38 -08:00
Kconfig omap: select REGULATOR_FIXED_VOLTAGE by default for panda and sdp4430 2011-02-22 08:37:03 -08:00
mailbox.c Merge branch 'for_2.6.39/pm-misc' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus 2011-03-10 18:54:14 -08:00
Makefile Merge remote branch 'remotes/origin/voltage_split_2.6.39' into tmp-integration-2.6.39-20110310-024 2011-03-10 22:43:32 -07:00
Makefile.boot
mcbsp.c OMAP: McBSP: APIs to pass DMA params from McBSP driver to client drivers 2011-02-24 13:03:52 -08:00
mux34xx.c omap3|4: mux: make local structures static 2011-01-06 19:58:28 -08:00
mux34xx.h omap: mux: Add 36xx CBP package support 2009-12-11 16:16:33 -08:00
mux44xx.c omap3|4: mux: make local structures static 2011-01-06 19:58:28 -08:00
mux44xx.h OMAP4: mux: Add CBS package data for OMAP4430 ES2 2010-11-17 12:01:52 +01:00
mux2420.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux2420.h omap: mux: Add data for 2420 2010-07-05 16:31:36 +03:00
mux2430.c OMAP: mux: Add __func__ macro to pr_xxx macros 2010-11-17 12:01:54 +01:00
mux2430.h omap: mux: Add data for 2430 2010-07-05 16:31:36 +03:00
mux.c omap2+: mux: Remove the use of IDLE flag 2011-03-11 11:32:25 -08:00
mux.h omap2+: mux: Remove the use of IDLE flag 2011-03-11 11:32:25 -08:00
omap4-common.c Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2011-01-06 19:13:58 -08:00
omap44xx-smc.S ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL 2011-03-09 16:38:36 -08:00
omap_hwmod_3xxx_data.c Merge remote branch 'remotes/origin/voltage_split_2.6.39' into tmp-integration-2.6.39-20110310-024 2011-03-10 22:43:32 -07:00
omap_hwmod_44xx_data.c OMAP4: hwmod_data: Add address space and irq in L3 hwmod. 2011-03-09 17:23:57 +05:30
omap_hwmod_2420_data.c Merge remote branch 'remotes/origin/hwmod_a_2.6.39' into tmp-integration-2.6.39-20110310-024 2011-03-10 22:43:05 -07:00
omap_hwmod_2430_data.c Merge remote branch 'remotes/origin/hwmod_a_2.6.39' into tmp-integration-2.6.39-20110310-024 2011-03-10 22:43:05 -07:00
omap_hwmod_common_data.c OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_hwmod_common_data.h OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_hwmod.c omap2+: Add separate list for dynamic pads to mux 2011-03-11 11:32:25 -08:00
omap_l3_noc.c OMAP4: l3: Introduce l3-interconnect error handling driver 2011-03-09 17:23:58 +05:30
omap_l3_noc.h OMAP4: l3: Introduce l3-interconnect error handling driver 2011-03-09 17:23:58 +05:30
omap_l3_smx.c OMAP3: l3: Introduce l3-interconnect error handling driver 2011-03-09 17:23:57 +05:30
omap_l3_smx.h OMAP3: l3: Introduce l3-interconnect error handling driver 2011-03-09 17:23:57 +05:30
omap_opp_data.h OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
omap_phy_internal.c usb: musb: AM35x: moving internal phy functions out of usb_musb.c file 2011-02-17 17:35:53 +02:00
omap_twl.c Merge branch 'integration-2.6.39-for-tony' of git://git.pwsan.com/linux-integration into omap-for-linus 2011-03-11 09:20:03 -08:00
omap-headsmp.S ARM: omap4: Convert END() to ENDPROC() for correct linkage with CONFIG_THUMB2_KERNEL 2011-03-09 16:38:36 -08:00
omap-hotplug.c ARM: CPU hotplug: remove bug checks in platform_cpu_die() 2010-12-20 15:09:10 +00:00
omap-iommu.c OMAP: iommu: make iva2 iommu selectable 2010-12-15 11:33:31 -06:00
omap-smp.c Merge branch 'misc' into devel 2011-01-06 22:32:52 +00:00
opp2xxx.h omap: Start using CONFIG_SOC_OMAP 2011-01-27 16:39:40 -08:00
opp3xxx_data.c Merge branch 'for_2.6.39/pm-integration' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus 2011-03-11 09:39:58 -08:00
opp4xxx_data.c Merge branch 'for_2.6.39/pm-integration' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus 2011-03-11 09:39:58 -08:00
opp2420_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
opp2430_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
opp.c omap: opp: add OMAP3 OPP table data and common init 2010-12-21 14:30:40 -08:00
pm24xx.c Merge branch 'integration-2.6.39-for-tony' of git://git.pwsan.com/linux-integration into omap-for-linus 2011-03-11 09:20:03 -08:00
pm34xx.c Merge branch 'for_2.6.39/pm-integration' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus 2011-03-11 09:39:58 -08:00
pm44xx.c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial 2011-01-13 10:05:56 -08:00
pm_bus.c omap2+: pm_bus: make functions used as pointers as static 2011-01-07 13:33:08 -08:00
pm-debug.c mach-omap2: pm: world-writable debugfs timer files 2011-02-04 12:08:12 -08:00
pm.c Merge branch 'integration-2.6.39-for-tony' of git://git.pwsan.com/linux-integration into omap-for-linus 2011-03-11 09:20:03 -08:00
pm.h OMAP3: PM: Set/clear T2 bit for Smartreflex on TWL 2011-03-09 16:15:50 -08:00
powerdomain2xxx_3xxx.c OMAP: PRCM: remove duplicated headers 2011-01-18 12:36:53 -07:00
powerdomain44xx.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain-common.c OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomain.c perf: add OMAP support for the new power events 2011-03-11 07:21:44 -08:00
powerdomain.h Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024 2011-03-10 22:41:28 -07:00
powerdomains2xxx_3xxx_data.c OMAP2+: powerdomain: fix bank power state bitfields 2011-03-07 19:28:15 -07:00
powerdomains2xxx_3xxx_data.h OMAP2+: powerdomain: move header file from plat-omap to mach-omap2 2010-12-21 21:05:16 -07:00
powerdomains2xxx_data.c Merge remote branches 'remotes/origin/pwrdm_clkdm_b_2.6.39', 'remotes/origin/pwrdm_add_can_lose_context_fns_2.6.39', 'remotes/origin/omap_device_a_2.6.39', 'remotes/origin/mmc_a_2.6.39', 'remotes/origin/hwmod_b_2.6.39', 'remotes/origin/dmtimer_a_2.6.39', 'remotes/origin/pwrdm_clkdm_a_2.6.39', 'remotes/origin/clkdm_statdep_omap4_2.6.39', 'remotes/origin/clk_a_2.6.39', 'remotes/origin/clk_autoidle_a_2.6.39', 'remotes/origin/clk_autoidle_b_2.6.39', 'remotes/origin/clk_b_2.6.39', 'remotes/origin/clk_clkdm_a_2.6.39', 'remotes/origin/misc_a_2.6.39', 'remotes/origin/for_2.6.39/omap3_hwmod_data' and 'remotes/origin/wdtimer_a_2.6.39' into tmp-integration-2.6.39-20110310-024 2011-03-10 22:41:28 -07:00
powerdomains3xxx_data.c OMAP2+: powerdomain: fix bank power state bitfields 2011-03-07 19:28:15 -07:00
powerdomains44xx_data.c OMAP2+: powerdomain: fix bank power state bitfields 2011-03-07 19:28:15 -07:00
prcm44xx.h OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prcm_mpu44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prcm_mpu44xx.h omap4: clockdomain: Fix the CPUx domain name 2011-03-01 16:36:20 -07:00
prcm-common.h Merge branches 'devel-iommu-mailbox', 'devel-mcbsp', 'devel-board' and 'devel-hsmmc' into omap-for-linus 2011-03-02 17:11:18 -08:00
prcm.c ARM: OMAP: Allow platforms to hook reset cleanly 2011-01-27 16:39:48 -08:00
prm2xxx_3xxx.c OMAP2+: hwmod: use status bit info for reset line 2011-03-10 03:23:56 -07:00
prm2xxx_3xxx.h OMAP2+: hwmod: use status bit info for reset line 2011-03-10 03:23:56 -07:00
prm44xx.c OMAP4: PRCM: move global reset function for OMAP4 to an OMAP4-specific file 2010-12-21 21:05:14 -07:00
prm44xx.h OMAP4: CM instances: add clockdomain register offsets 2010-12-21 21:05:15 -07:00
prm-regbits-24xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm-regbits-34xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm-regbits-44xx.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prm.h OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
prminst44xx.c OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
prminst44xx.h OMAP4: PRCM: add OMAP4-specific accessor/mutator functions 2010-12-21 21:05:14 -07:00
scrm44xx.h OMAP4: PRCM: Add SCRM header file 2010-12-21 20:01:54 -07:00
sdram-hynix-h8mbx00u0mer-0em.h omap3: zoom: Introduce zoom3 board support 2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdram-nokia.c arm: omap: sdram-nokia: add 97.6/195.2 MHz timing data 2010-12-17 15:13:46 -08:00
sdram-nokia.h arm: omap: add sdram-nokia.h 2010-12-17 15:13:44 -08:00
sdram-numonyx-m65kxxxxam.h omap3: SDRC: add timing data for Numonyx M65KxxxxAM 2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdrc2xxx.c OMAP2/3: PRM/CM: prefix OMAP2 PRM/CM functions with "omap2_" 2010-12-21 21:05:14 -07:00
sdrc.c OMAP2/3: PRCM: split OMAP2/3-specific PRCM code into OMAP2/3-specific files 2010-12-21 20:01:55 -07:00
sdrc.h OMAP2+: use global values for the SRAM PA addresses 2010-12-21 14:45:56 -08:00
serial.c OMAP2+: hwmod: rename some init functions 2011-02-28 12:04:35 -07:00
sleep24xx.S omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sleep34xx.S OMAP3: PM: Clear the SCTLR C bit in asm code to prevent data cache allocation 2011-03-10 12:23:13 -08:00
smartreflex-class3.c OMAP: smartreflex: move plat/smartreflex.h to mach-omap2/smartreflex.h 2011-03-07 20:05:08 -07:00
smartreflex.c Merge branch 'integration-2.6.39-for-tony' of git://git.pwsan.com/linux-integration into omap-for-linus 2011-03-11 09:20:03 -08:00
smartreflex.h OMAP: voltage: move plat/voltage.h to mach-omap2/voltage.h 2011-03-07 20:05:08 -07:00
sr_device.c OMAP: voltage: move plat/voltage.h to mach-omap2/voltage.h 2011-03-07 20:05:08 -07:00
sram34xx.S ARM: omap3: Thumb-2 compatibility for sram34xx.S 2011-03-09 16:38:36 -08:00
sram242x.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
sram243x.S OMAP2/3: SRAM: add comment about crashes during a TLB miss 2010-12-21 21:08:14 -07:00
timer-gp.c Merge branch 'devel-cleanup' into omap-for-linus 2011-03-02 17:07:14 -08:00
timer-gp.h OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
timer-mpu.c omap4: Use irq line defines from irq-44xx.h 2010-02-23 15:29:08 -08:00
usb-ehci.c arm: omap4: usb: add platform init code for EHCI 2010-12-01 02:42:13 +05:30
usb-fs.c OMAP: control: move plat-omap/control.h to mach-omap2/control.h 2010-10-08 11:40:20 -06:00
usb-musb.c OMAP2+: musb: hwmod adaptation for musb registration 2011-02-17 18:34:00 +02:00
usb-tusb6010.c Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2011-01-07 13:16:28 -08:00
vc3xxx_data.c OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
vc44xx_data.c OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
vc.h OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
voltage.c OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
voltage.h OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
voltagedomains3xxx_data.c OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
voltagedomains44xx_data.c OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
vp3xxx_data.c OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
vp44xx_data.c OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
vp.h OMAP2+: voltage: reorganize, split code from data 2011-03-10 22:17:45 -07:00
wd_timer.c omap2+: wdt: trivial sparse fixes 2011-01-06 19:58:28 -08:00
wd_timer.h OMAP2+: wd_timer: separate watchdog disable code from the rest of mach-omap2/devices.c 2010-12-21 19:56:17 -07:00