kernel-ark/drivers/serial/8250_hub6.c
Russell King ec9f47cd6a [PATCH] Serial: Split 8250 port table
Add separate files for the different 8250 ISA-based serial boards.

Looking across all the various architectures, it seems reasonable that
we can key the availability of the configuration options for these
beasts to the bus-related symbols (iow, CONFIG_ISA).  We also standardise
the base baud/uart clock rate for these boards - I'm sure that isn't
architecture specific, but is solely dependent on the crystal fitted
on the board (which should be the same no matter what type of machine
its fitted into.)

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-06-27 11:12:54 +01:00

59 lines
1.2 KiB
C

/*
* linux/drivers/serial/8250_hub6.c
*
* Copyright (C) 2005 Russell King.
* Data taken from include/asm-i386/serial.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/serial_8250.h>
#define HUB6(card,port) \
{ \
.iobase = 0x302, \
.irq = 3, \
.uartclk = 1843200, \
.iotype = UPIO_HUB6, \
.flags = UPF_BOOT_AUTOCONF, \
.hub6 = (card) << 6 | (port) << 3 | 1, \
}
static struct plat_serial8250_port hub6_data[] = {
HUB6(0,0),
HUB6(0,1),
HUB6(0,2),
HUB6(0,3),
HUB6(0,4),
HUB6(0,5),
HUB6(1,0),
HUB6(1,1),
HUB6(1,2),
HUB6(1,3),
HUB6(1,4),
HUB6(1,5),
{ },
};
static struct platform_device hub6_device = {
.name = "serial8250",
.id = 4,
.dev = {
.platform_data = hub6_data,
},
};
static int __init hub6_init(void)
{
return platform_device_register(&hub6_device);
}
module_init(hub6_init);
MODULE_AUTHOR("Russell King");
MODULE_DESCRIPTION("8250 serial probe module for Hub6 cards");
MODULE_LICENSE("GPL");