kernel-ark/drivers/input/joystick/twidjoy.c
Jiri Slaby 7b19ada2ed get rid of input BIT* duplicate defines
get rid of input BIT* duplicate defines

use newly global defined macros for input layer. Also remove includes of
input.h from non-input sources only for BIT macro definiton. Define the
macro temporarily in local manner, all those local definitons will be
removed further in this patchset (to not break bisecting).
BIT macro will be globally defined (1<<x)

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: <dtor@mail.ru>
Acked-by: Jiri Kosina <jkosina@suse.cz>
Cc: <lenb@kernel.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Cc: <perex@suse.cz>
Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Cc: <vernux@us.ibm.com>
Cc: <malattia@linux.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:42 -07:00

280 lines
7.7 KiB
C

/*
* $Id: twidjoy.c,v 1.5 2002/01/22 20:31:53 vojtech Exp $
*
* derived from CVS-ID "stinger.c,v 1.5 2001/05/29 12:57:18 vojtech Exp"
*
* Copyright (c) 2001 Arndt Schoenewald
* Copyright (c) 2000-2001 Vojtech Pavlik
* Copyright (c) 2000 Mark Fletcher
*
* Sponsored by Quelltext AG (http://www.quelltext-ag.de), Dortmund, Germany
*/
/*
* Driver to use Handykey's Twiddler (the first edition, i.e. the one with
* the RS232 interface) as a joystick under Linux
*
* The Twiddler is a one-handed chording keyboard featuring twelve buttons on
* the front, six buttons on the top, and a built-in tilt sensor. The buttons
* on the front, which are grouped as four rows of three buttons, are pressed
* by the four fingers (this implies only one button per row can be held down
* at the same time) and the buttons on the top are for the thumb. The tilt
* sensor delivers X and Y axis data depending on how the Twiddler is held.
* Additional information can be found at http://www.handykey.com.
*
* This driver does not use the Twiddler for its intended purpose, i.e. as
* a chording keyboard, but as a joystick: pressing and releasing a button
* immediately sends a corresponding button event, and tilting it generates
* corresponding ABS_X and ABS_Y events. This turns the Twiddler into a game
* controller with amazing 18 buttons :-)
*
* Note: The Twiddler2 (the successor of the Twiddler that connects directly
* to the PS/2 keyboard and mouse ports) is NOT supported by this driver!
*
* For questions or feedback regarding this driver module please contact:
* Arndt Schoenewald <arndt@quelltext.com>
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/input.h>
#include <linux/serio.h>
#include <linux/init.h>
#define DRIVER_DESC "Handykey Twiddler keyboard as a joystick driver"
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
/*
* Constants.
*/
#define TWIDJOY_MAX_LENGTH 5
static struct twidjoy_button_spec {
int bitshift;
int bitmask;
int buttons[3];
}
twidjoy_buttons[] = {
{ 0, 3, { BTN_A, BTN_B, BTN_C } },
{ 2, 3, { BTN_X, BTN_Y, BTN_Z } },
{ 4, 3, { BTN_TL, BTN_TR, BTN_TR2 } },
{ 6, 3, { BTN_SELECT, BTN_START, BTN_MODE } },
{ 8, 1, { BTN_BASE5 } },
{ 9, 1, { BTN_BASE } },
{ 10, 1, { BTN_BASE3 } },
{ 11, 1, { BTN_BASE4 } },
{ 12, 1, { BTN_BASE2 } },
{ 13, 1, { BTN_BASE6 } },
{ 0, 0, { 0 } }
};
/*
* Per-Twiddler data.
*/
struct twidjoy {
struct input_dev *dev;
int idx;
unsigned char data[TWIDJOY_MAX_LENGTH];
char phys[32];
};
/*
* twidjoy_process_packet() decodes packets the driver receives from the
* Twiddler. It updates the data accordingly.
*/
static void twidjoy_process_packet(struct twidjoy *twidjoy)
{
struct input_dev *dev = twidjoy->dev;
unsigned char *data = twidjoy->data;
struct twidjoy_button_spec *bp;
int button_bits, abs_x, abs_y;
button_bits = ((data[1] & 0x7f) << 7) | (data[0] & 0x7f);
for (bp = twidjoy_buttons; bp->bitmask; bp++) {
int value = (button_bits & (bp->bitmask << bp->bitshift)) >> bp->bitshift;
int i;
for (i = 0; i < bp->bitmask; i++)
input_report_key(dev, bp->buttons[i], i+1 == value);
}
abs_x = ((data[4] & 0x07) << 5) | ((data[3] & 0x7C) >> 2);
if (data[4] & 0x08) abs_x -= 256;
abs_y = ((data[3] & 0x01) << 7) | ((data[2] & 0x7F) >> 0);
if (data[3] & 0x02) abs_y -= 256;
input_report_abs(dev, ABS_X, -abs_x);
input_report_abs(dev, ABS_Y, +abs_y);
input_sync(dev);
}
/*
* twidjoy_interrupt() is called by the low level driver when characters
* are ready for us. We then buffer them for further processing, or call the
* packet processing routine.
*/
static irqreturn_t twidjoy_interrupt(struct serio *serio, unsigned char data, unsigned int flags)
{
struct twidjoy *twidjoy = serio_get_drvdata(serio);
/* All Twiddler packets are 5 bytes. The fact that the first byte
* has a MSB of 0 and all other bytes have a MSB of 1 can be used
* to check and regain sync. */
if ((data & 0x80) == 0)
twidjoy->idx = 0; /* this byte starts a new packet */
else if (twidjoy->idx == 0)
return IRQ_HANDLED; /* wrong MSB -- ignore this byte */
if (twidjoy->idx < TWIDJOY_MAX_LENGTH)
twidjoy->data[twidjoy->idx++] = data;
if (twidjoy->idx == TWIDJOY_MAX_LENGTH) {
twidjoy_process_packet(twidjoy);
twidjoy->idx = 0;
}
return IRQ_HANDLED;
}
/*
* twidjoy_disconnect() is the opposite of twidjoy_connect()
*/
static void twidjoy_disconnect(struct serio *serio)
{
struct twidjoy *twidjoy = serio_get_drvdata(serio);
serio_close(serio);
serio_set_drvdata(serio, NULL);
input_unregister_device(twidjoy->dev);
kfree(twidjoy);
}
/*
* twidjoy_connect() is the routine that is called when someone adds a
* new serio device. It looks for the Twiddler, and if found, registers
* it as an input device.
*/
static int twidjoy_connect(struct serio *serio, struct serio_driver *drv)
{
struct twidjoy_button_spec *bp;
struct twidjoy *twidjoy;
struct input_dev *input_dev;
int err = -ENOMEM;
int i;
twidjoy = kzalloc(sizeof(struct twidjoy), GFP_KERNEL);
input_dev = input_allocate_device();
if (!twidjoy || !input_dev)
goto fail1;
twidjoy->dev = input_dev;
snprintf(twidjoy->phys, sizeof(twidjoy->phys), "%s/input0", serio->phys);
input_dev->name = "Handykey Twiddler";
input_dev->phys = twidjoy->phys;
input_dev->id.bustype = BUS_RS232;
input_dev->id.vendor = SERIO_TWIDJOY;
input_dev->id.product = 0x0001;
input_dev->id.version = 0x0100;
input_dev->dev.parent = &serio->dev;
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_set_abs_params(input_dev, ABS_X, -50, 50, 4, 4);
input_set_abs_params(input_dev, ABS_Y, -50, 50, 4, 4);
for (bp = twidjoy_buttons; bp->bitmask; bp++)
for (i = 0; i < bp->bitmask; i++)
set_bit(bp->buttons[i], input_dev->keybit);
serio_set_drvdata(serio, twidjoy);
err = serio_open(serio, drv);
if (err)
goto fail2;
err = input_register_device(twidjoy->dev);
if (err)
goto fail3;
return 0;
fail3: serio_close(serio);
fail2: serio_set_drvdata(serio, NULL);
fail1: input_free_device(input_dev);
kfree(twidjoy);
return err;
}
/*
* The serio driver structure.
*/
static struct serio_device_id twidjoy_serio_ids[] = {
{
.type = SERIO_RS232,
.proto = SERIO_TWIDJOY,
.id = SERIO_ANY,
.extra = SERIO_ANY,
},
{ 0 }
};
MODULE_DEVICE_TABLE(serio, twidjoy_serio_ids);
static struct serio_driver twidjoy_drv = {
.driver = {
.name = "twidjoy",
},
.description = DRIVER_DESC,
.id_table = twidjoy_serio_ids,
.interrupt = twidjoy_interrupt,
.connect = twidjoy_connect,
.disconnect = twidjoy_disconnect,
};
/*
* The functions for inserting/removing us as a module.
*/
static int __init twidjoy_init(void)
{
return serio_register_driver(&twidjoy_drv);
}
static void __exit twidjoy_exit(void)
{
serio_unregister_driver(&twidjoy_drv);
}
module_init(twidjoy_init);
module_exit(twidjoy_exit);