kernel-ark/drivers/acpi/utilities/uteval.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

697 lines
19 KiB
C

/******************************************************************************
*
* Module Name: uteval - Object evaluation
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2005, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#include <acpi/acpi.h>
#include <acpi/acnamesp.h>
#include <acpi/acinterp.h>
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME ("uteval")
/*******************************************************************************
*
* FUNCTION: acpi_ut_osi_implementation
*
* PARAMETERS: walk_state - Current walk state
*
* RETURN: Status
*
* DESCRIPTION: Implementation of _OSI predefined control method
* Supported = _OSI (String)
*
******************************************************************************/
acpi_status
acpi_ut_osi_implementation (
struct acpi_walk_state *walk_state)
{
union acpi_operand_object *string_desc;
union acpi_operand_object *return_desc;
acpi_native_uint i;
ACPI_FUNCTION_TRACE ("ut_osi_implementation");
/* Validate the string input argument */
string_desc = walk_state->arguments[0].object;
if (!string_desc || (string_desc->common.type != ACPI_TYPE_STRING)) {
return_ACPI_STATUS (AE_TYPE);
}
/* Create a return object (Default value = 0) */
return_desc = acpi_ut_create_internal_object (ACPI_TYPE_INTEGER);
if (!return_desc) {
return_ACPI_STATUS (AE_NO_MEMORY);
}
/* Compare input string to table of supported strings */
for (i = 0; i < ACPI_NUM_OSI_STRINGS; i++) {
if (!ACPI_STRCMP (string_desc->string.pointer,
(char *) acpi_gbl_valid_osi_strings[i])) {
/* This string is supported */
return_desc->integer.value = 0xFFFFFFFF;
break;
}
}
walk_state->return_desc = return_desc;
return_ACPI_STATUS (AE_CTRL_TERMINATE);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_evaluate_object
*
* PARAMETERS: prefix_node - Starting node
* Path - Path to object from starting node
* expected_return_types - Bitmap of allowed return types
* return_desc - Where a return value is stored
*
* RETURN: Status
*
* DESCRIPTION: Evaluates a namespace object and verifies the type of the
* return object. Common code that simplifies accessing objects
* that have required return objects of fixed types.
*
* NOTE: Internal function, no parameter validation
*
******************************************************************************/
acpi_status
acpi_ut_evaluate_object (
struct acpi_namespace_node *prefix_node,
char *path,
u32 expected_return_btypes,
union acpi_operand_object **return_desc)
{
struct acpi_parameter_info info;
acpi_status status;
u32 return_btype;
ACPI_FUNCTION_TRACE ("ut_evaluate_object");
info.node = prefix_node;
info.parameters = NULL;
info.parameter_type = ACPI_PARAM_ARGS;
/* Evaluate the object/method */
status = acpi_ns_evaluate_relative (path, &info);
if (ACPI_FAILURE (status)) {
if (status == AE_NOT_FOUND) {
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC, "[%4.4s.%s] was not found\n",
acpi_ut_get_node_name (prefix_node), path));
}
else {
ACPI_REPORT_METHOD_ERROR ("Method execution failed",
prefix_node, path, status);
}
return_ACPI_STATUS (status);
}
/* Did we get a return object? */
if (!info.return_object) {
if (expected_return_btypes) {
ACPI_REPORT_METHOD_ERROR ("No object was returned from",
prefix_node, path, AE_NOT_EXIST);
return_ACPI_STATUS (AE_NOT_EXIST);
}
return_ACPI_STATUS (AE_OK);
}
/* Map the return object type to the bitmapped type */
switch (ACPI_GET_OBJECT_TYPE (info.return_object)) {
case ACPI_TYPE_INTEGER:
return_btype = ACPI_BTYPE_INTEGER;
break;
case ACPI_TYPE_BUFFER:
return_btype = ACPI_BTYPE_BUFFER;
break;
case ACPI_TYPE_STRING:
return_btype = ACPI_BTYPE_STRING;
break;
case ACPI_TYPE_PACKAGE:
return_btype = ACPI_BTYPE_PACKAGE;
break;
default:
return_btype = 0;
break;
}
if ((acpi_gbl_enable_interpreter_slack) &&
(!expected_return_btypes)) {
/*
* We received a return object, but one was not expected. This can
* happen frequently if the "implicit return" feature is enabled.
* Just delete the return object and return AE_OK.
*/
acpi_ut_remove_reference (info.return_object);
return_ACPI_STATUS (AE_OK);
}
/* Is the return object one of the expected types? */
if (!(expected_return_btypes & return_btype)) {
ACPI_REPORT_METHOD_ERROR ("Return object type is incorrect",
prefix_node, path, AE_TYPE);
ACPI_DEBUG_PRINT ((ACPI_DB_ERROR,
"Type returned from %s was incorrect: %s, expected Btypes: %X\n",
path, acpi_ut_get_object_type_name (info.return_object),
expected_return_btypes));
/* On error exit, we must delete the return object */
acpi_ut_remove_reference (info.return_object);
return_ACPI_STATUS (AE_TYPE);
}
/* Object type is OK, return it */
*return_desc = info.return_object;
return_ACPI_STATUS (AE_OK);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_evaluate_numeric_object
*
* PARAMETERS: *object_name - Object name to be evaluated
* device_node - Node for the device
* *Address - Where the value is returned
*
* RETURN: Status
*
* DESCRIPTION: Evaluates a numeric namespace object for a selected device
* and stores result in *Address.
*
* NOTE: Internal function, no parameter validation
*
******************************************************************************/
acpi_status
acpi_ut_evaluate_numeric_object (
char *object_name,
struct acpi_namespace_node *device_node,
acpi_integer *address)
{
union acpi_operand_object *obj_desc;
acpi_status status;
ACPI_FUNCTION_TRACE ("ut_evaluate_numeric_object");
status = acpi_ut_evaluate_object (device_node, object_name,
ACPI_BTYPE_INTEGER, &obj_desc);
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
/* Get the returned Integer */
*address = obj_desc->integer.value;
/* On exit, we must delete the return object */
acpi_ut_remove_reference (obj_desc);
return_ACPI_STATUS (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_copy_id_string
*
* PARAMETERS: Destination - Where to copy the string
* Source - Source string
* max_length - Length of the destination buffer
*
* RETURN: None
*
* DESCRIPTION: Copies an ID string for the _HID, _CID, and _UID methods.
* Performs removal of a leading asterisk if present -- workaround
* for a known issue on a bunch of machines.
*
******************************************************************************/
static void
acpi_ut_copy_id_string (
char *destination,
char *source,
acpi_size max_length)
{
/*
* Workaround for ID strings that have a leading asterisk. This construct
* is not allowed by the ACPI specification (ID strings must be
* alphanumeric), but enough existing machines have this embedded in their
* ID strings that the following code is useful.
*/
if (*source == '*') {
source++;
}
/* Do the actual copy */
ACPI_STRNCPY (destination, source, max_length);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_execute_HID
*
* PARAMETERS: device_node - Node for the device
* *Hid - Where the HID is returned
*
* RETURN: Status
*
* DESCRIPTION: Executes the _HID control method that returns the hardware
* ID of the device.
*
* NOTE: Internal function, no parameter validation
*
******************************************************************************/
acpi_status
acpi_ut_execute_HID (
struct acpi_namespace_node *device_node,
struct acpi_device_id *hid)
{
union acpi_operand_object *obj_desc;
acpi_status status;
ACPI_FUNCTION_TRACE ("ut_execute_HID");
status = acpi_ut_evaluate_object (device_node, METHOD_NAME__HID,
ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING, &obj_desc);
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
if (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_INTEGER) {
/* Convert the Numeric HID to string */
acpi_ex_eisa_id_to_string ((u32) obj_desc->integer.value, hid->value);
}
else {
/* Copy the String HID from the returned object */
acpi_ut_copy_id_string (hid->value, obj_desc->string.pointer,
sizeof (hid->value));
}
/* On exit, we must delete the return object */
acpi_ut_remove_reference (obj_desc);
return_ACPI_STATUS (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_translate_one_cid
*
* PARAMETERS: obj_desc - _CID object, must be integer or string
* one_cid - Where the CID string is returned
*
* RETURN: Status
*
* DESCRIPTION: Return a numeric or string _CID value as a string.
* (Compatible ID)
*
* NOTE: Assumes a maximum _CID string length of
* ACPI_MAX_CID_LENGTH.
*
******************************************************************************/
static acpi_status
acpi_ut_translate_one_cid (
union acpi_operand_object *obj_desc,
struct acpi_compatible_id *one_cid)
{
switch (ACPI_GET_OBJECT_TYPE (obj_desc)) {
case ACPI_TYPE_INTEGER:
/* Convert the Numeric CID to string */
acpi_ex_eisa_id_to_string ((u32) obj_desc->integer.value, one_cid->value);
return (AE_OK);
case ACPI_TYPE_STRING:
if (obj_desc->string.length > ACPI_MAX_CID_LENGTH) {
return (AE_AML_STRING_LIMIT);
}
/* Copy the String CID from the returned object */
acpi_ut_copy_id_string (one_cid->value, obj_desc->string.pointer,
ACPI_MAX_CID_LENGTH);
return (AE_OK);
default:
return (AE_TYPE);
}
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_execute_CID
*
* PARAMETERS: device_node - Node for the device
* *Cid - Where the CID is returned
*
* RETURN: Status
*
* DESCRIPTION: Executes the _CID control method that returns one or more
* compatible hardware IDs for the device.
*
* NOTE: Internal function, no parameter validation
*
******************************************************************************/
acpi_status
acpi_ut_execute_CID (
struct acpi_namespace_node *device_node,
struct acpi_compatible_id_list **return_cid_list)
{
union acpi_operand_object *obj_desc;
acpi_status status;
u32 count;
u32 size;
struct acpi_compatible_id_list *cid_list;
acpi_native_uint i;
ACPI_FUNCTION_TRACE ("ut_execute_CID");
/* Evaluate the _CID method for this device */
status = acpi_ut_evaluate_object (device_node, METHOD_NAME__CID,
ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING | ACPI_BTYPE_PACKAGE,
&obj_desc);
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
/* Get the number of _CIDs returned */
count = 1;
if (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_PACKAGE) {
count = obj_desc->package.count;
}
/* Allocate a worst-case buffer for the _CIDs */
size = (((count - 1) * sizeof (struct acpi_compatible_id)) +
sizeof (struct acpi_compatible_id_list));
cid_list = ACPI_MEM_CALLOCATE ((acpi_size) size);
if (!cid_list) {
return_ACPI_STATUS (AE_NO_MEMORY);
}
/* Init CID list */
cid_list->count = count;
cid_list->size = size;
/*
* A _CID can return either a single compatible ID or a package of compatible
* IDs. Each compatible ID can be one of the following:
* -- Number (32 bit compressed EISA ID) or
* -- String (PCI ID format, e.g. "PCI\VEN_vvvv&DEV_dddd&SUBSYS_ssssssss").
*/
/* The _CID object can be either a single CID or a package (list) of CIDs */
if (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_PACKAGE) {
/* Translate each package element */
for (i = 0; i < count; i++) {
status = acpi_ut_translate_one_cid (obj_desc->package.elements[i],
&cid_list->id[i]);
if (ACPI_FAILURE (status)) {
break;
}
}
}
else {
/* Only one CID, translate to a string */
status = acpi_ut_translate_one_cid (obj_desc, cid_list->id);
}
/* Cleanup on error */
if (ACPI_FAILURE (status)) {
ACPI_MEM_FREE (cid_list);
}
else {
*return_cid_list = cid_list;
}
/* On exit, we must delete the _CID return object */
acpi_ut_remove_reference (obj_desc);
return_ACPI_STATUS (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_execute_UID
*
* PARAMETERS: device_node - Node for the device
* *Uid - Where the UID is returned
*
* RETURN: Status
*
* DESCRIPTION: Executes the _UID control method that returns the hardware
* ID of the device.
*
* NOTE: Internal function, no parameter validation
*
******************************************************************************/
acpi_status
acpi_ut_execute_UID (
struct acpi_namespace_node *device_node,
struct acpi_device_id *uid)
{
union acpi_operand_object *obj_desc;
acpi_status status;
ACPI_FUNCTION_TRACE ("ut_execute_UID");
status = acpi_ut_evaluate_object (device_node, METHOD_NAME__UID,
ACPI_BTYPE_INTEGER | ACPI_BTYPE_STRING, &obj_desc);
if (ACPI_FAILURE (status)) {
return_ACPI_STATUS (status);
}
if (ACPI_GET_OBJECT_TYPE (obj_desc) == ACPI_TYPE_INTEGER) {
/* Convert the Numeric UID to string */
acpi_ex_unsigned_integer_to_string (obj_desc->integer.value, uid->value);
}
else {
/* Copy the String UID from the returned object */
acpi_ut_copy_id_string (uid->value, obj_desc->string.pointer,
sizeof (uid->value));
}
/* On exit, we must delete the return object */
acpi_ut_remove_reference (obj_desc);
return_ACPI_STATUS (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_execute_STA
*
* PARAMETERS: device_node - Node for the device
* *Flags - Where the status flags are returned
*
* RETURN: Status
*
* DESCRIPTION: Executes _STA for selected device and stores results in
* *Flags.
*
* NOTE: Internal function, no parameter validation
*
******************************************************************************/
acpi_status
acpi_ut_execute_STA (
struct acpi_namespace_node *device_node,
u32 *flags)
{
union acpi_operand_object *obj_desc;
acpi_status status;
ACPI_FUNCTION_TRACE ("ut_execute_STA");
status = acpi_ut_evaluate_object (device_node, METHOD_NAME__STA,
ACPI_BTYPE_INTEGER, &obj_desc);
if (ACPI_FAILURE (status)) {
if (AE_NOT_FOUND == status) {
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
"_STA on %4.4s was not found, assuming device is present\n",
acpi_ut_get_node_name (device_node)));
*flags = 0x0F;
status = AE_OK;
}
return_ACPI_STATUS (status);
}
/* Extract the status flags */
*flags = (u32) obj_desc->integer.value;
/* On exit, we must delete the return object */
acpi_ut_remove_reference (obj_desc);
return_ACPI_STATUS (status);
}
/*******************************************************************************
*
* FUNCTION: acpi_ut_execute_Sxds
*
* PARAMETERS: device_node - Node for the device
* *Flags - Where the status flags are returned
*
* RETURN: Status
*
* DESCRIPTION: Executes _STA for selected device and stores results in
* *Flags.
*
* NOTE: Internal function, no parameter validation
*
******************************************************************************/
acpi_status
acpi_ut_execute_sxds (
struct acpi_namespace_node *device_node,
u8 *highest)
{
union acpi_operand_object *obj_desc;
acpi_status status;
u32 i;
ACPI_FUNCTION_TRACE ("ut_execute_Sxds");
for (i = 0; i < 4; i++) {
highest[i] = 0xFF;
status = acpi_ut_evaluate_object (device_node,
(char *) acpi_gbl_highest_dstate_names[i],
ACPI_BTYPE_INTEGER, &obj_desc);
if (ACPI_FAILURE (status)) {
if (status != AE_NOT_FOUND) {
ACPI_DEBUG_PRINT ((ACPI_DB_EXEC,
"%s on Device %4.4s, %s\n",
(char *) acpi_gbl_highest_dstate_names[i],
acpi_ut_get_node_name (device_node),
acpi_format_exception (status)));
return_ACPI_STATUS (status);
}
}
else {
/* Extract the Dstate value */
highest[i] = (u8) obj_desc->integer.value;
/* Delete the return object */
acpi_ut_remove_reference (obj_desc);
}
}
return_ACPI_STATUS (AE_OK);
}