kernel-ark/arch/arm/mach-footbridge/dc21285-timer.c
Shawn Guo 838a2ae80a ARM: use clockevents_config_and_register() where possible
The clockevent core is able to figure out the best mult and shift,
calculate min_delta_ns and max_delta_ns, with the necessary info passed
into clockevents_config_and_register().  Use this combined configure
and register function where possible to make the codes less error prone
and gain some positive diff stat.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Reviewed-by: Anton Vorontsov <cbouatmailru@gmail.com>
Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Tested-by: Roland Stigge <stigge@antcom.de>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Cc: David Brown <davidb@codeaurora.org>
Tested-by: Tony Lindgren <tony@atomide.com>
Acked-by: Barry Song <baohua.song@csr.com>
Tested-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Tony Prisk <linux@prisktech.co.nz>
Cc: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-01-14 10:12:42 -08:00

111 lines
2.4 KiB
C

/*
* linux/arch/arm/mach-footbridge/dc21285-timer.c
*
* Copyright (C) 1998 Russell King.
* Copyright (C) 1998 Phil Blundell
*/
#include <linux/clockchips.h>
#include <linux/clocksource.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <asm/irq.h>
#include <asm/hardware/dec21285.h>
#include <asm/mach/time.h>
#include <asm/system_info.h>
#include "common.h"
static cycle_t cksrc_dc21285_read(struct clocksource *cs)
{
return cs->mask - *CSR_TIMER2_VALUE;
}
static int cksrc_dc21285_enable(struct clocksource *cs)
{
*CSR_TIMER2_LOAD = cs->mask;
*CSR_TIMER2_CLR = 0;
*CSR_TIMER2_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_DIV16;
return 0;
}
static void cksrc_dc21285_disable(struct clocksource *cs)
{
*CSR_TIMER2_CNTL = 0;
}
static struct clocksource cksrc_dc21285 = {
.name = "dc21285_timer2",
.rating = 200,
.read = cksrc_dc21285_read,
.enable = cksrc_dc21285_enable,
.disable = cksrc_dc21285_disable,
.mask = CLOCKSOURCE_MASK(24),
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
};
static void ckevt_dc21285_set_mode(enum clock_event_mode mode,
struct clock_event_device *c)
{
switch (mode) {
case CLOCK_EVT_MODE_RESUME:
case CLOCK_EVT_MODE_PERIODIC:
*CSR_TIMER1_CLR = 0;
*CSR_TIMER1_LOAD = (mem_fclk_21285 + 8 * HZ) / (16 * HZ);
*CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD |
TIMER_CNTL_DIV16;
break;
default:
*CSR_TIMER1_CNTL = 0;
break;
}
}
static struct clock_event_device ckevt_dc21285 = {
.name = "dc21285_timer1",
.features = CLOCK_EVT_FEAT_PERIODIC,
.rating = 200,
.irq = IRQ_TIMER1,
.set_mode = ckevt_dc21285_set_mode,
};
static irqreturn_t timer1_interrupt(int irq, void *dev_id)
{
struct clock_event_device *ce = dev_id;
*CSR_TIMER1_CLR = 0;
ce->event_handler(ce);
return IRQ_HANDLED;
}
static struct irqaction footbridge_timer_irq = {
.name = "dc21285_timer1",
.handler = timer1_interrupt,
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.dev_id = &ckevt_dc21285,
};
/*
* Set up timer interrupt.
*/
static void __init footbridge_timer_init(void)
{
struct clock_event_device *ce = &ckevt_dc21285;
clocksource_register_hz(&cksrc_dc21285, (mem_fclk_21285 + 8) / 16);
setup_irq(ce->irq, &footbridge_timer_irq);
ce->cpumask = cpumask_of(smp_processor_id());
clockevents_config_and_register(ce, mem_fclk_21285, 0x4, 0xffffff);
}
struct sys_timer footbridge_timer = {
.init = footbridge_timer_init,
};