kernel-ark/include/linux/a.out.h
David Howells 7fa3031500 aout: suppress A.OUT library support if !CONFIG_ARCH_SUPPORTS_AOUT
Suppress A.OUT library support if CONFIG_ARCH_SUPPORTS_AOUT is not set.

Not all architectures support the A.OUT binfmt, so the ELF binfmt should not
be permitted to go looking for A.OUT libraries to load in such a case.  Not
only that, but under such conditions A.OUT core dumps are not produced either.

To make this work, this patch also does the following:

 (1) Makes the existence of the contents of linux/a.out.h contingent on
     CONFIG_ARCH_SUPPORTS_AOUT.

 (2) Renames dump_thread() to aout_dump_thread() as it's only called by A.OUT
     core dumping code.

 (3) Moves aout_dump_thread() into asm/a.out-core.h and makes it inline.  This
     is then included only where needed.  This means that this bit of arch
     code will be stored in the appropriate A.OUT binfmt module rather than
     the core kernel.

 (4) Drops A.OUT support for Blackfin (according to Mike Frysinger it's not
     needed) and FRV.

This patch depends on the previous patch to move STACK_TOP[_MAX] out of
asm/a.out.h and into asm/processor.h as they're required whether or not A.OUT
format is available.

[jdike@addtoit.com: uml: re-remove accidentally restored code]
Signed-off-by: David Howells <dhowells@redhat.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:30 -08:00

287 lines
7.4 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#ifndef __A_OUT_GNU_H__
#define __A_OUT_GNU_H__
#ifdef CONFIG_ARCH_SUPPORTS_AOUT
#define __GNU_EXEC_MACROS__
#ifndef __STRUCT_EXEC_OVERRIDE__
#include <asm/a.out.h>
#endif /* __STRUCT_EXEC_OVERRIDE__ */
#ifndef __ASSEMBLY__
/* these go in the N_MACHTYPE field */
enum machine_type {
#if defined (M_OLDSUN2)
M__OLDSUN2 = M_OLDSUN2,
#else
M_OLDSUN2 = 0,
#endif
#if defined (M_68010)
M__68010 = M_68010,
#else
M_68010 = 1,
#endif
#if defined (M_68020)
M__68020 = M_68020,
#else
M_68020 = 2,
#endif
#if defined (M_SPARC)
M__SPARC = M_SPARC,
#else
M_SPARC = 3,
#endif
/* skip a bunch so we don't run into any of sun's numbers */
M_386 = 100,
M_MIPS1 = 151, /* MIPS R3000/R3000 binary */
M_MIPS2 = 152 /* MIPS R6000/R4000 binary */
};
#if !defined (N_MAGIC)
#define N_MAGIC(exec) ((exec).a_info & 0xffff)
#endif
#define N_MACHTYPE(exec) ((enum machine_type)(((exec).a_info >> 16) & 0xff))
#define N_FLAGS(exec) (((exec).a_info >> 24) & 0xff)
#define N_SET_INFO(exec, magic, type, flags) \
((exec).a_info = ((magic) & 0xffff) \
| (((int)(type) & 0xff) << 16) \
| (((flags) & 0xff) << 24))
#define N_SET_MAGIC(exec, magic) \
((exec).a_info = (((exec).a_info & 0xffff0000) | ((magic) & 0xffff)))
#define N_SET_MACHTYPE(exec, machtype) \
((exec).a_info = \
((exec).a_info&0xff00ffff) | ((((int)(machtype))&0xff) << 16))
#define N_SET_FLAGS(exec, flags) \
((exec).a_info = \
((exec).a_info&0x00ffffff) | (((flags) & 0xff) << 24))
/* Code indicating object file or impure executable. */
#define OMAGIC 0407
/* Code indicating pure executable. */
#define NMAGIC 0410
/* Code indicating demand-paged executable. */
#define ZMAGIC 0413
/* This indicates a demand-paged executable with the header in the text.
The first page is unmapped to help trap NULL pointer references */
#define QMAGIC 0314
/* Code indicating core file. */
#define CMAGIC 0421
#if !defined (N_BADMAG)
#define N_BADMAG(x) (N_MAGIC(x) != OMAGIC \
&& N_MAGIC(x) != NMAGIC \
&& N_MAGIC(x) != ZMAGIC \
&& N_MAGIC(x) != QMAGIC)
#endif
#define _N_HDROFF(x) (1024 - sizeof (struct exec))
#if !defined (N_TXTOFF)
#define N_TXTOFF(x) \
(N_MAGIC(x) == ZMAGIC ? _N_HDROFF((x)) + sizeof (struct exec) : \
(N_MAGIC(x) == QMAGIC ? 0 : sizeof (struct exec)))
#endif
#if !defined (N_DATOFF)
#define N_DATOFF(x) (N_TXTOFF(x) + (x).a_text)
#endif
#if !defined (N_TRELOFF)
#define N_TRELOFF(x) (N_DATOFF(x) + (x).a_data)
#endif
#if !defined (N_DRELOFF)
#define N_DRELOFF(x) (N_TRELOFF(x) + N_TRSIZE(x))
#endif
#if !defined (N_SYMOFF)
#define N_SYMOFF(x) (N_DRELOFF(x) + N_DRSIZE(x))
#endif
#if !defined (N_STROFF)
#define N_STROFF(x) (N_SYMOFF(x) + N_SYMSIZE(x))
#endif
/* Address of text segment in memory after it is loaded. */
#if !defined (N_TXTADDR)
#define N_TXTADDR(x) (N_MAGIC(x) == QMAGIC ? PAGE_SIZE : 0)
#endif
/* Address of data segment in memory after it is loaded.
Note that it is up to you to define SEGMENT_SIZE
on machines not listed here. */
#if defined(vax) || defined(hp300) || defined(pyr)
#define SEGMENT_SIZE page_size
#endif
#ifdef sony
#define SEGMENT_SIZE 0x2000
#endif /* Sony. */
#ifdef is68k
#define SEGMENT_SIZE 0x20000
#endif
#if defined(m68k) && defined(PORTAR)
#define PAGE_SIZE 0x400
#define SEGMENT_SIZE PAGE_SIZE
#endif
#ifdef linux
#ifdef __KERNEL__
#include <asm/page.h>
#else
#include <unistd.h>
#endif
#if defined(__i386__) || defined(__mc68000__)
#define SEGMENT_SIZE 1024
#else
#ifndef SEGMENT_SIZE
#ifdef __KERNEL__
#define SEGMENT_SIZE PAGE_SIZE
#else
#define SEGMENT_SIZE getpagesize()
#endif
#endif
#endif
#endif
#define _N_SEGMENT_ROUND(x) ALIGN(x, SEGMENT_SIZE)
#define _N_TXTENDADDR(x) (N_TXTADDR(x)+(x).a_text)
#ifndef N_DATADDR
#define N_DATADDR(x) \
(N_MAGIC(x)==OMAGIC? (_N_TXTENDADDR(x)) \
: (_N_SEGMENT_ROUND (_N_TXTENDADDR(x))))
#endif
/* Address of bss segment in memory after it is loaded. */
#if !defined (N_BSSADDR)
#define N_BSSADDR(x) (N_DATADDR(x) + (x).a_data)
#endif
#if !defined (N_NLIST_DECLARED)
struct nlist {
union {
char *n_name;
struct nlist *n_next;
long n_strx;
} n_un;
unsigned char n_type;
char n_other;
short n_desc;
unsigned long n_value;
};
#endif /* no N_NLIST_DECLARED. */
#if !defined (N_UNDF)
#define N_UNDF 0
#endif
#if !defined (N_ABS)
#define N_ABS 2
#endif
#if !defined (N_TEXT)
#define N_TEXT 4
#endif
#if !defined (N_DATA)
#define N_DATA 6
#endif
#if !defined (N_BSS)
#define N_BSS 8
#endif
#if !defined (N_FN)
#define N_FN 15
#endif
#if !defined (N_EXT)
#define N_EXT 1
#endif
#if !defined (N_TYPE)
#define N_TYPE 036
#endif
#if !defined (N_STAB)
#define N_STAB 0340
#endif
/* The following type indicates the definition of a symbol as being
an indirect reference to another symbol. The other symbol
appears as an undefined reference, immediately following this symbol.
Indirection is asymmetrical. The other symbol's value will be used
to satisfy requests for the indirect symbol, but not vice versa.
If the other symbol does not have a definition, libraries will
be searched to find a definition. */
#define N_INDR 0xa
/* The following symbols refer to set elements.
All the N_SET[ATDB] symbols with the same name form one set.
Space is allocated for the set in the text section, and each set
element's value is stored into one word of the space.
The first word of the space is the length of the set (number of elements).
The address of the set is made into an N_SETV symbol
whose name is the same as the name of the set.
This symbol acts like a N_DATA global symbol
in that it can satisfy undefined external references. */
/* These appear as input to LD, in a .o file. */
#define N_SETA 0x14 /* Absolute set element symbol */
#define N_SETT 0x16 /* Text set element symbol */
#define N_SETD 0x18 /* Data set element symbol */
#define N_SETB 0x1A /* Bss set element symbol */
/* This is output from LD. */
#define N_SETV 0x1C /* Pointer to set vector in data area. */
#if !defined (N_RELOCATION_INFO_DECLARED)
/* This structure describes a single relocation to be performed.
The text-relocation section of the file is a vector of these structures,
all of which apply to the text section.
Likewise, the data-relocation section applies to the data section. */
struct relocation_info
{
/* Address (within segment) to be relocated. */
int r_address;
/* The meaning of r_symbolnum depends on r_extern. */
unsigned int r_symbolnum:24;
/* Nonzero means value is a pc-relative offset
and it should be relocated for changes in its own address
as well as for changes in the symbol or section specified. */
unsigned int r_pcrel:1;
/* Length (as exponent of 2) of the field to be relocated.
Thus, a value of 2 indicates 1<<2 bytes. */
unsigned int r_length:2;
/* 1 => relocate with value of symbol.
r_symbolnum is the index of the symbol
in file's the symbol table.
0 => relocate with the address of a segment.
r_symbolnum is N_TEXT, N_DATA, N_BSS or N_ABS
(the N_EXT bit may be set also, but signifies nothing). */
unsigned int r_extern:1;
/* Four bits that aren't used, but when writing an object file
it is desirable to clear them. */
#ifdef NS32K
unsigned r_bsr:1;
unsigned r_disp:1;
unsigned r_pad:2;
#else
unsigned int r_pad:4;
#endif
};
#endif /* no N_RELOCATION_INFO_DECLARED. */
#endif /*__ASSEMBLY__ */
#else /* CONFIG_ARCH_SUPPORTS_AOUT */
#ifndef __ASSEMBLY__
struct exec {
};
#endif
#endif /* CONFIG_ARCH_SUPPORTS_AOUT */
#endif /* __A_OUT_GNU_H__ */