davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
7f2c85777d
kernel-ark/arch/sh/boards/superh/microdev/setup.c
Paul Mundt 82f81f4784 sh: Kill off machvec aliases. 
We now throw all of the machvecs in to .machvec.init and either
select one on the command line, or copy out the first (and
usually only) one to sh_mv. The rest are freed as usual.

This gets rid of all of the silly sh_mv aliasing and makes the
selection explicit rather than link-order dependent.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-06-08 02:43:39 +00:00

406 lines
13 KiB
C
Raw Blame History

/*
* arch/sh/boards/superh/microdev/setup.c
*
* Copyright (C) 2003 Sean McGoogan (Sean.McGoogan@superh.com)
* Copyright (C) 2003, 2004 SuperH, Inc.
* Copyright (C) 2004, 2005 Paul Mundt
*
* SuperH SH4-202 MicroDev board support.
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/ioport.h>
#include <video/s1d13xxxfb.h>
#include <asm/microdev.h>
#include <asm/io.h>
#include <asm/machvec.h>
extern void microdev_heartbeat(void);
/****************************************************************************/
/*
* Setup for the SMSC FDC37C93xAPM
*/
#define SMSC_CONFIG_PORT_ADDR (0x3F0)
#define SMSC_INDEX_PORT_ADDR SMSC_CONFIG_PORT_ADDR
#define SMSC_DATA_PORT_ADDR (SMSC_INDEX_PORT_ADDR + 1)
#define SMSC_ENTER_CONFIG_KEY 0x55
#define SMSC_EXIT_CONFIG_KEY 0xaa
#define SMCS_LOGICAL_DEV_INDEX 0x07 /* Logical Device Number */
#define SMSC_DEVICE_ID_INDEX 0x20 /* Device ID */
#define SMSC_DEVICE_REV_INDEX 0x21 /* Device Revision */
#define SMSC_ACTIVATE_INDEX 0x30 /* Activate */
#define SMSC_PRIMARY_BASE_INDEX 0x60 /* Primary Base Address */
#define SMSC_SECONDARY_BASE_INDEX 0x62 /* Secondary Base Address */
#define SMSC_PRIMARY_INT_INDEX 0x70 /* Primary Interrupt Select */
#define SMSC_SECONDARY_INT_INDEX 0x72 /* Secondary Interrupt Select */
#define SMSC_HDCS0_INDEX 0xf0 /* HDCS0 Address Decoder */
#define SMSC_HDCS1_INDEX 0xf1 /* HDCS1 Address Decoder */
#define SMSC_IDE1_DEVICE 1 /* IDE #1 logical device */
#define SMSC_IDE2_DEVICE 2 /* IDE #2 logical device */
#define SMSC_PARALLEL_DEVICE 3 /* Parallel Port logical device */
#define SMSC_SERIAL1_DEVICE 4 /* Serial #1 logical device */
#define SMSC_SERIAL2_DEVICE 5 /* Serial #2 logical device */
#define SMSC_KEYBOARD_DEVICE 7 /* Keyboard logical device */
#define SMSC_CONFIG_REGISTERS 8 /* Configuration Registers (Aux I/O) */
#define SMSC_READ_INDEXED(index) ({ \
outb((index), SMSC_INDEX_PORT_ADDR); \
inb(SMSC_DATA_PORT_ADDR); })
#define SMSC_WRITE_INDEXED(val, index) ({ \
outb((index), SMSC_INDEX_PORT_ADDR); \
outb((val), SMSC_DATA_PORT_ADDR); })
#define IDE1_PRIMARY_BASE 0x01f0 /* Task File Registe base for IDE #1 */
#define IDE1_SECONDARY_BASE 0x03f6 /* Miscellaneous AT registers for IDE #1 */
#define IDE2_PRIMARY_BASE 0x0170 /* Task File Registe base for IDE #2 */
#define IDE2_SECONDARY_BASE 0x0376 /* Miscellaneous AT registers for IDE #2 */
#define SERIAL1_PRIMARY_BASE 0x03f8
#define SERIAL2_PRIMARY_BASE 0x02f8
#define MSB(x) ( (x) >> 8 )
#define LSB(x) ( (x) & 0xff )
/* General-Purpose base address on CPU-board FPGA */
#define MICRODEV_FPGA_GP_BASE 0xa6100000ul
/* assume a Keyboard Controller is present */
int microdev_kbd_controller_present = 1;
static struct resource smc91x_resources[] = {
[0] = {
.start = 0x300,
.end = 0x300 + 0x0001000 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = MICRODEV_LINUX_IRQ_ETHERNET,
.end = MICRODEV_LINUX_IRQ_ETHERNET,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = -1,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
#ifdef CONFIG_FB_S1D13XXX
static struct s1d13xxxfb_regval s1d13806_initregs[] = {
{ S1DREG_MISC, 0x00 },
{ S1DREG_COM_DISP_MODE, 0x00 },
{ S1DREG_GPIO_CNF0, 0x00 },
{ S1DREG_GPIO_CNF1, 0x00 },
{ S1DREG_GPIO_CTL0, 0x00 },
{ S1DREG_GPIO_CTL1, 0x00 },
{ S1DREG_CLK_CNF, 0x02 },
{ S1DREG_LCD_CLK_CNF, 0x01 },
{ S1DREG_CRT_CLK_CNF, 0x03 },
{ S1DREG_MPLUG_CLK_CNF, 0x03 },
{ S1DREG_CPU2MEM_WST_SEL, 0x02 },
{ S1DREG_SDRAM_REF_RATE, 0x03 },
{ S1DREG_SDRAM_TC0, 0x00 },
{ S1DREG_SDRAM_TC1, 0x01 },
{ S1DREG_MEM_CNF, 0x80 },
{ S1DREG_PANEL_TYPE, 0x25 },
{ S1DREG_MOD_RATE, 0x00 },
{ S1DREG_LCD_DISP_HWIDTH, 0x63 },
{ S1DREG_LCD_NDISP_HPER, 0x1e },
{ S1DREG_TFT_FPLINE_START, 0x06 },
{ S1DREG_TFT_FPLINE_PWIDTH, 0x03 },
{ S1DREG_LCD_DISP_VHEIGHT0, 0x57 },
{ S1DREG_LCD_DISP_VHEIGHT1, 0x02 },
{ S1DREG_LCD_NDISP_VPER, 0x00 },
{ S1DREG_TFT_FPFRAME_START, 0x0a },
{ S1DREG_TFT_FPFRAME_PWIDTH, 0x81 },
{ S1DREG_LCD_DISP_MODE, 0x03 },
{ S1DREG_LCD_MISC, 0x00 },
{ S1DREG_LCD_DISP_START0, 0x00 },
{ S1DREG_LCD_DISP_START1, 0x00 },
{ S1DREG_LCD_DISP_START2, 0x00 },
{ S1DREG_LCD_MEM_OFF0, 0x90 },
{ S1DREG_LCD_MEM_OFF1, 0x01 },
{ S1DREG_LCD_PIX_PAN, 0x00 },
{ S1DREG_LCD_DISP_FIFO_HTC, 0x00 },
{ S1DREG_LCD_DISP_FIFO_LTC, 0x00 },
{ S1DREG_CRT_DISP_HWIDTH, 0x63 },
{ S1DREG_CRT_NDISP_HPER, 0x1f },
{ S1DREG_CRT_HRTC_START, 0x04 },
{ S1DREG_CRT_HRTC_PWIDTH, 0x8f },
{ S1DREG_CRT_DISP_VHEIGHT0, 0x57 },
{ S1DREG_CRT_DISP_VHEIGHT1, 0x02 },
{ S1DREG_CRT_NDISP_VPER, 0x1b },
{ S1DREG_CRT_VRTC_START, 0x00 },
{ S1DREG_CRT_VRTC_PWIDTH, 0x83 },
{ S1DREG_TV_OUT_CTL, 0x10 },
{ S1DREG_CRT_DISP_MODE, 0x05 },
{ S1DREG_CRT_DISP_START0, 0x00 },
{ S1DREG_CRT_DISP_START1, 0x00 },
{ S1DREG_CRT_DISP_START2, 0x00 },
{ S1DREG_CRT_MEM_OFF0, 0x20 },
{ S1DREG_CRT_MEM_OFF1, 0x03 },
{ S1DREG_CRT_PIX_PAN, 0x00 },
{ S1DREG_CRT_DISP_FIFO_HTC, 0x00 },
{ S1DREG_CRT_DISP_FIFO_LTC, 0x00 },
{ S1DREG_LCD_CUR_CTL, 0x00 },
{ S1DREG_LCD_CUR_START, 0x01 },
{ S1DREG_LCD_CUR_XPOS0, 0x00 },
{ S1DREG_LCD_CUR_XPOS1, 0x00 },
{ S1DREG_LCD_CUR_YPOS0, 0x00 },
{ S1DREG_LCD_CUR_YPOS1, 0x00 },
{ S1DREG_LCD_CUR_BCTL0, 0x00 },
{ S1DREG_LCD_CUR_GCTL0, 0x00 },
{ S1DREG_LCD_CUR_RCTL0, 0x00 },
{ S1DREG_LCD_CUR_BCTL1, 0x1f },
{ S1DREG_LCD_CUR_GCTL1, 0x3f },
{ S1DREG_LCD_CUR_RCTL1, 0x1f },
{ S1DREG_LCD_CUR_FIFO_HTC, 0x00 },
{ S1DREG_CRT_CUR_CTL, 0x00 },
{ S1DREG_CRT_CUR_START, 0x01 },
{ S1DREG_CRT_CUR_XPOS0, 0x00 },
{ S1DREG_CRT_CUR_XPOS1, 0x00 },
{ S1DREG_CRT_CUR_YPOS0, 0x00 },
{ S1DREG_CRT_CUR_YPOS1, 0x00 },
{ S1DREG_CRT_CUR_BCTL0, 0x00 },
{ S1DREG_CRT_CUR_GCTL0, 0x00 },
{ S1DREG_CRT_CUR_RCTL0, 0x00 },
{ S1DREG_CRT_CUR_BCTL1, 0x1f },
{ S1DREG_CRT_CUR_GCTL1, 0x3f },
{ S1DREG_CRT_CUR_RCTL1, 0x1f },
{ S1DREG_CRT_CUR_FIFO_HTC, 0x00 },
{ S1DREG_BBLT_CTL0, 0x00 },
{ S1DREG_BBLT_CTL1, 0x00 },
{ S1DREG_BBLT_CC_EXP, 0x00 },
{ S1DREG_BBLT_OP, 0x00 },
{ S1DREG_BBLT_SRC_START0, 0x00 },
{ S1DREG_BBLT_SRC_START1, 0x00 },
{ S1DREG_BBLT_SRC_START2, 0x00 },
{ S1DREG_BBLT_DST_START0, 0x00 },
{ S1DREG_BBLT_DST_START1, 0x00 },
{ S1DREG_BBLT_DST_START2, 0x00 },
{ S1DREG_BBLT_MEM_OFF0, 0x00 },
{ S1DREG_BBLT_MEM_OFF1, 0x00 },
{ S1DREG_BBLT_WIDTH0, 0x00 },
{ S1DREG_BBLT_WIDTH1, 0x00 },
{ S1DREG_BBLT_HEIGHT0, 0x00 },
{ S1DREG_BBLT_HEIGHT1, 0x00 },
{ S1DREG_BBLT_BGC0, 0x00 },
{ S1DREG_BBLT_BGC1, 0x00 },
{ S1DREG_BBLT_FGC0, 0x00 },
{ S1DREG_BBLT_FGC1, 0x00 },
{ S1DREG_LKUP_MODE, 0x00 },
{ S1DREG_LKUP_ADDR, 0x00 },
{ S1DREG_PS_CNF, 0x10 },
{ S1DREG_PS_STATUS, 0x00 },
{ S1DREG_CPU2MEM_WDOGT, 0x00 },
{ S1DREG_COM_DISP_MODE, 0x02 },
};
static struct s1d13xxxfb_pdata s1d13806_platform_data = {
.initregs = s1d13806_initregs,
.initregssize = ARRAY_SIZE(s1d13806_initregs),
};
static struct resource s1d13806_resources[] = {
[0] = {
.start = 0x07200000,
.end = 0x07200000 + 0x00200000 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = 0x07000000,
.end = 0x07000000 + 0x00200000 - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device s1d13806_device = {
.name = "s1d13806fb",
.id = -1,
.num_resources = ARRAY_SIZE(s1d13806_resources),
.resource = s1d13806_resources,
.dev = {
.platform_data = &s1d13806_platform_data,
},
};
#endif
static struct platform_device *microdev_devices[] __initdata = {
&smc91x_device,
#ifdef CONFIG_FB_S1D13XXX
&s1d13806_device,
#endif
};
static int __init microdev_devices_setup(void)
{
return platform_add_devices(microdev_devices, ARRAY_SIZE(microdev_devices));
}
/*
* Setup for the SMSC FDC37C93xAPM
*/
static int __init smsc_superio_setup(void)
{
unsigned char devid, devrev;
/* Initially the chip is in run state */
/* Put it into configuration state */
outb(SMSC_ENTER_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
/* Read device ID info */
devid = SMSC_READ_INDEXED(SMSC_DEVICE_ID_INDEX);
devrev = SMSC_READ_INDEXED(SMSC_DEVICE_REV_INDEX);
if ( (devid==0x30) && (devrev==0x01) )
{
printk("SMSC FDC37C93xAPM SuperIO device detected\n");
}
else
{ /* not the device identity we expected */
printk("Not detected a SMSC FDC37C93xAPM SuperIO device (devid=0x%02x, rev=0x%02x)\n",
devid, devrev);
/* inform the keyboard driver that we have no keyboard controller */
microdev_kbd_controller_present = 0;
/* little point in doing anything else in this functon */
return 0;
}
/* Select the keyboard device */
SMSC_WRITE_INDEXED(SMSC_KEYBOARD_DEVICE, SMCS_LOGICAL_DEV_INDEX);
/* enable it */
SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
/* enable the interrupts */
SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_KEYBOARD, SMSC_PRIMARY_INT_INDEX);
SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_MOUSE, SMSC_SECONDARY_INT_INDEX);
/* Select the Serial #1 device */
SMSC_WRITE_INDEXED(SMSC_SERIAL1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
/* enable it */
SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
/* program with port addresses */
SMSC_WRITE_INDEXED(MSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
SMSC_WRITE_INDEXED(LSB(SERIAL1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
/* enable the interrupts */
SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL1, SMSC_PRIMARY_INT_INDEX);
/* Select the Serial #2 device */
SMSC_WRITE_INDEXED(SMSC_SERIAL2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
/* enable it */
SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
/* program with port addresses */
SMSC_WRITE_INDEXED(MSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
SMSC_WRITE_INDEXED(LSB(SERIAL2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
SMSC_WRITE_INDEXED(0x00, SMSC_HDCS0_INDEX);
/* enable the interrupts */
SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_SERIAL2, SMSC_PRIMARY_INT_INDEX);
/* Select the IDE#1 device */
SMSC_WRITE_INDEXED(SMSC_IDE1_DEVICE, SMCS_LOGICAL_DEV_INDEX);
/* enable it */
SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
/* program with port addresses */
SMSC_WRITE_INDEXED(MSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
SMSC_WRITE_INDEXED(LSB(IDE1_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
SMSC_WRITE_INDEXED(MSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
SMSC_WRITE_INDEXED(LSB(IDE1_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
SMSC_WRITE_INDEXED(0x0c, SMSC_HDCS0_INDEX);
SMSC_WRITE_INDEXED(0x00, SMSC_HDCS1_INDEX);
/* select the interrupt */
SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE1, SMSC_PRIMARY_INT_INDEX);
/* Select the IDE#2 device */
SMSC_WRITE_INDEXED(SMSC_IDE2_DEVICE, SMCS_LOGICAL_DEV_INDEX);
/* enable it */
SMSC_WRITE_INDEXED(1, SMSC_ACTIVATE_INDEX);
/* program with port addresses */
SMSC_WRITE_INDEXED(MSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+0);
SMSC_WRITE_INDEXED(LSB(IDE2_PRIMARY_BASE), SMSC_PRIMARY_BASE_INDEX+1);
SMSC_WRITE_INDEXED(MSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+0);
SMSC_WRITE_INDEXED(LSB(IDE2_SECONDARY_BASE), SMSC_SECONDARY_BASE_INDEX+1);
/* select the interrupt */
SMSC_WRITE_INDEXED(MICRODEV_FPGA_IRQ_IDE2, SMSC_PRIMARY_INT_INDEX);
/* Select the configuration registers */
SMSC_WRITE_INDEXED(SMSC_CONFIG_REGISTERS, SMCS_LOGICAL_DEV_INDEX);
/* enable the appropriate GPIO pins for IDE functionality:
* bit[0] In/Out 1==input; 0==output
* bit[1] Polarity 1==invert; 0==no invert
* bit[2] Int Enb #1 1==Enable Combined IRQ #1; 0==disable
* bit[3:4] Function Select 00==original; 01==Alternate Function #1
*/
SMSC_WRITE_INDEXED(0x00, 0xc2); /* GP42 = nIDE1_OE */
SMSC_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */
SMSC_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */
SMSC_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */
SMSC_WRITE_INDEXED(0x08, 0xe8); /* GP20 = nIDE2_OE */
/* Exit the configuration state */
outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR);
return 0;
}
static void __init microdev_setup(char **cmdline_p)
{
int * const fpgaRevisionRegister = (int*)(MICRODEV_FPGA_GP_BASE + 0x8ul);
const int fpgaRevision = *fpgaRevisionRegister;
int * const CacheControlRegister = (int*)CCR;
device_initcall(microdev_devices_setup);
device_initcall(smsc_superio_setup);
printk("SuperH %s board (FPGA rev: 0x%0x, CCR: 0x%0x)\n",
get_system_type(), fpgaRevision, *CacheControlRegister);
}
/*
* The Machine Vector
*/
static struct sh_machine_vector mv_sh4202_microdev __initmv = {
.mv_name = "SH4-202 MicroDev",
.mv_setup = microdev_setup,
.mv_nr_irqs = 72, /* QQQ need to check this - use the MACRO */
.mv_inb = microdev_inb,
.mv_inw = microdev_inw,
.mv_inl = microdev_inl,
.mv_outb = microdev_outb,
.mv_outw = microdev_outw,
.mv_outl = microdev_outl,
.mv_inb_p = microdev_inb_p,
.mv_inw_p = microdev_inw_p,
.mv_inl_p = microdev_inl_p,
.mv_outb_p = microdev_outb_p,
.mv_outw_p = microdev_outw_p,
.mv_outl_p = microdev_outl_p,
.mv_insb = microdev_insb,
.mv_insw = microdev_insw,
.mv_insl = microdev_insl,
.mv_outsb = microdev_outsb,
.mv_outsw = microdev_outsw,
.mv_outsl = microdev_outsl,
.mv_init_irq = init_microdev_irq,
#ifdef CONFIG_HEARTBEAT
.mv_heartbeat = microdev_heartbeat,
#endif
};
Reference in New Issue View Git Blame Copy Permalink