c9651e70ad
Since 3.2.12 and 3.3, some systems are failing to boot with a BUG_ON.
Some other systems using the pata_jmicron driver fail to boot because no
disks are detected. Passing pcie_aspm=force on the kernel command line
works around it.
The cause: commit 4949be1682
("PCI: ignore pre-1.1 ASPM quirking when
ASPM is disabled") changed the behaviour of pcie_aspm_sanity_check() to
always return 0 if aspm is disabled, in order to avoid cases where we
changed ASPM state on pre-PCIe 1.1 devices.
This skipped the secondary function of pcie_aspm_sanity_check which was
to avoid us enabling ASPM on devices that had non-PCIe children, causing
trouble later on. Move the aspm_disabled check so we continue to honour
that scenario.
Addresses https://bugzilla.kernel.org/show_bug.cgi?id=42979 and
http://bugs.debian.org/665420
Reported-by: Romain Francoise <romain@orebokech.com> # kernel panic
Reported-by: Chris Holland <bandidoirlandes@gmail.com> # disk detection trouble
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Cc: stable@vger.kernel.org
Tested-by: Hatem Masmoudi <hatem.masmoudi@gmail.com> # Dell Latitude E5520
Tested-by: janek <jan0x6c@gmail.com> # pata_jmicron with JMB362/JMB363
[jn: with more symptoms in log message]
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1013 lines
28 KiB
C
1013 lines
28 KiB
C
/*
|
|
* File: drivers/pci/pcie/aspm.c
|
|
* Enabling PCIe link L0s/L1 state and Clock Power Management
|
|
*
|
|
* Copyright (C) 2007 Intel
|
|
* Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com)
|
|
* Copyright (C) Shaohua Li (shaohua.li@intel.com)
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci_regs.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pci-aspm.h>
|
|
#include "../pci.h"
|
|
|
|
#ifdef MODULE_PARAM_PREFIX
|
|
#undef MODULE_PARAM_PREFIX
|
|
#endif
|
|
#define MODULE_PARAM_PREFIX "pcie_aspm."
|
|
|
|
/* Note: those are not register definitions */
|
|
#define ASPM_STATE_L0S_UP (1) /* Upstream direction L0s state */
|
|
#define ASPM_STATE_L0S_DW (2) /* Downstream direction L0s state */
|
|
#define ASPM_STATE_L1 (4) /* L1 state */
|
|
#define ASPM_STATE_L0S (ASPM_STATE_L0S_UP | ASPM_STATE_L0S_DW)
|
|
#define ASPM_STATE_ALL (ASPM_STATE_L0S | ASPM_STATE_L1)
|
|
|
|
struct aspm_latency {
|
|
u32 l0s; /* L0s latency (nsec) */
|
|
u32 l1; /* L1 latency (nsec) */
|
|
};
|
|
|
|
struct pcie_link_state {
|
|
struct pci_dev *pdev; /* Upstream component of the Link */
|
|
struct pcie_link_state *root; /* pointer to the root port link */
|
|
struct pcie_link_state *parent; /* pointer to the parent Link state */
|
|
struct list_head sibling; /* node in link_list */
|
|
struct list_head children; /* list of child link states */
|
|
struct list_head link; /* node in parent's children list */
|
|
|
|
/* ASPM state */
|
|
u32 aspm_support:3; /* Supported ASPM state */
|
|
u32 aspm_enabled:3; /* Enabled ASPM state */
|
|
u32 aspm_capable:3; /* Capable ASPM state with latency */
|
|
u32 aspm_default:3; /* Default ASPM state by BIOS */
|
|
u32 aspm_disable:3; /* Disabled ASPM state */
|
|
|
|
/* Clock PM state */
|
|
u32 clkpm_capable:1; /* Clock PM capable? */
|
|
u32 clkpm_enabled:1; /* Current Clock PM state */
|
|
u32 clkpm_default:1; /* Default Clock PM state by BIOS */
|
|
|
|
/* Exit latencies */
|
|
struct aspm_latency latency_up; /* Upstream direction exit latency */
|
|
struct aspm_latency latency_dw; /* Downstream direction exit latency */
|
|
/*
|
|
* Endpoint acceptable latencies. A pcie downstream port only
|
|
* has one slot under it, so at most there are 8 functions.
|
|
*/
|
|
struct aspm_latency acceptable[8];
|
|
};
|
|
|
|
static int aspm_disabled, aspm_force;
|
|
static bool aspm_support_enabled = true;
|
|
static DEFINE_MUTEX(aspm_lock);
|
|
static LIST_HEAD(link_list);
|
|
|
|
#define POLICY_DEFAULT 0 /* BIOS default setting */
|
|
#define POLICY_PERFORMANCE 1 /* high performance */
|
|
#define POLICY_POWERSAVE 2 /* high power saving */
|
|
|
|
#ifdef CONFIG_PCIEASPM_PERFORMANCE
|
|
static int aspm_policy = POLICY_PERFORMANCE;
|
|
#elif defined CONFIG_PCIEASPM_POWERSAVE
|
|
static int aspm_policy = POLICY_POWERSAVE;
|
|
#else
|
|
static int aspm_policy;
|
|
#endif
|
|
|
|
static const char *policy_str[] = {
|
|
[POLICY_DEFAULT] = "default",
|
|
[POLICY_PERFORMANCE] = "performance",
|
|
[POLICY_POWERSAVE] = "powersave"
|
|
};
|
|
|
|
#define LINK_RETRAIN_TIMEOUT HZ
|
|
|
|
static int policy_to_aspm_state(struct pcie_link_state *link)
|
|
{
|
|
switch (aspm_policy) {
|
|
case POLICY_PERFORMANCE:
|
|
/* Disable ASPM and Clock PM */
|
|
return 0;
|
|
case POLICY_POWERSAVE:
|
|
/* Enable ASPM L0s/L1 */
|
|
return ASPM_STATE_ALL;
|
|
case POLICY_DEFAULT:
|
|
return link->aspm_default;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int policy_to_clkpm_state(struct pcie_link_state *link)
|
|
{
|
|
switch (aspm_policy) {
|
|
case POLICY_PERFORMANCE:
|
|
/* Disable ASPM and Clock PM */
|
|
return 0;
|
|
case POLICY_POWERSAVE:
|
|
/* Disable Clock PM */
|
|
return 1;
|
|
case POLICY_DEFAULT:
|
|
return link->clkpm_default;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void pcie_set_clkpm_nocheck(struct pcie_link_state *link, int enable)
|
|
{
|
|
int pos;
|
|
u16 reg16;
|
|
struct pci_dev *child;
|
|
struct pci_bus *linkbus = link->pdev->subordinate;
|
|
|
|
list_for_each_entry(child, &linkbus->devices, bus_list) {
|
|
pos = pci_pcie_cap(child);
|
|
if (!pos)
|
|
return;
|
|
pci_read_config_word(child, pos + PCI_EXP_LNKCTL, ®16);
|
|
if (enable)
|
|
reg16 |= PCI_EXP_LNKCTL_CLKREQ_EN;
|
|
else
|
|
reg16 &= ~PCI_EXP_LNKCTL_CLKREQ_EN;
|
|
pci_write_config_word(child, pos + PCI_EXP_LNKCTL, reg16);
|
|
}
|
|
link->clkpm_enabled = !!enable;
|
|
}
|
|
|
|
static void pcie_set_clkpm(struct pcie_link_state *link, int enable)
|
|
{
|
|
/* Don't enable Clock PM if the link is not Clock PM capable */
|
|
if (!link->clkpm_capable && enable)
|
|
enable = 0;
|
|
/* Need nothing if the specified equals to current state */
|
|
if (link->clkpm_enabled == enable)
|
|
return;
|
|
pcie_set_clkpm_nocheck(link, enable);
|
|
}
|
|
|
|
static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist)
|
|
{
|
|
int pos, capable = 1, enabled = 1;
|
|
u32 reg32;
|
|
u16 reg16;
|
|
struct pci_dev *child;
|
|
struct pci_bus *linkbus = link->pdev->subordinate;
|
|
|
|
/* All functions should have the same cap and state, take the worst */
|
|
list_for_each_entry(child, &linkbus->devices, bus_list) {
|
|
pos = pci_pcie_cap(child);
|
|
if (!pos)
|
|
return;
|
|
pci_read_config_dword(child, pos + PCI_EXP_LNKCAP, ®32);
|
|
if (!(reg32 & PCI_EXP_LNKCAP_CLKPM)) {
|
|
capable = 0;
|
|
enabled = 0;
|
|
break;
|
|
}
|
|
pci_read_config_word(child, pos + PCI_EXP_LNKCTL, ®16);
|
|
if (!(reg16 & PCI_EXP_LNKCTL_CLKREQ_EN))
|
|
enabled = 0;
|
|
}
|
|
link->clkpm_enabled = enabled;
|
|
link->clkpm_default = enabled;
|
|
link->clkpm_capable = (blacklist) ? 0 : capable;
|
|
}
|
|
|
|
/*
|
|
* pcie_aspm_configure_common_clock: check if the 2 ends of a link
|
|
* could use common clock. If they are, configure them to use the
|
|
* common clock. That will reduce the ASPM state exit latency.
|
|
*/
|
|
static void pcie_aspm_configure_common_clock(struct pcie_link_state *link)
|
|
{
|
|
int ppos, cpos, same_clock = 1;
|
|
u16 reg16, parent_reg, child_reg[8];
|
|
unsigned long start_jiffies;
|
|
struct pci_dev *child, *parent = link->pdev;
|
|
struct pci_bus *linkbus = parent->subordinate;
|
|
/*
|
|
* All functions of a slot should have the same Slot Clock
|
|
* Configuration, so just check one function
|
|
*/
|
|
child = list_entry(linkbus->devices.next, struct pci_dev, bus_list);
|
|
BUG_ON(!pci_is_pcie(child));
|
|
|
|
/* Check downstream component if bit Slot Clock Configuration is 1 */
|
|
cpos = pci_pcie_cap(child);
|
|
pci_read_config_word(child, cpos + PCI_EXP_LNKSTA, ®16);
|
|
if (!(reg16 & PCI_EXP_LNKSTA_SLC))
|
|
same_clock = 0;
|
|
|
|
/* Check upstream component if bit Slot Clock Configuration is 1 */
|
|
ppos = pci_pcie_cap(parent);
|
|
pci_read_config_word(parent, ppos + PCI_EXP_LNKSTA, ®16);
|
|
if (!(reg16 & PCI_EXP_LNKSTA_SLC))
|
|
same_clock = 0;
|
|
|
|
/* Configure downstream component, all functions */
|
|
list_for_each_entry(child, &linkbus->devices, bus_list) {
|
|
cpos = pci_pcie_cap(child);
|
|
pci_read_config_word(child, cpos + PCI_EXP_LNKCTL, ®16);
|
|
child_reg[PCI_FUNC(child->devfn)] = reg16;
|
|
if (same_clock)
|
|
reg16 |= PCI_EXP_LNKCTL_CCC;
|
|
else
|
|
reg16 &= ~PCI_EXP_LNKCTL_CCC;
|
|
pci_write_config_word(child, cpos + PCI_EXP_LNKCTL, reg16);
|
|
}
|
|
|
|
/* Configure upstream component */
|
|
pci_read_config_word(parent, ppos + PCI_EXP_LNKCTL, ®16);
|
|
parent_reg = reg16;
|
|
if (same_clock)
|
|
reg16 |= PCI_EXP_LNKCTL_CCC;
|
|
else
|
|
reg16 &= ~PCI_EXP_LNKCTL_CCC;
|
|
pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, reg16);
|
|
|
|
/* Retrain link */
|
|
reg16 |= PCI_EXP_LNKCTL_RL;
|
|
pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, reg16);
|
|
|
|
/* Wait for link training end. Break out after waiting for timeout */
|
|
start_jiffies = jiffies;
|
|
for (;;) {
|
|
pci_read_config_word(parent, ppos + PCI_EXP_LNKSTA, ®16);
|
|
if (!(reg16 & PCI_EXP_LNKSTA_LT))
|
|
break;
|
|
if (time_after(jiffies, start_jiffies + LINK_RETRAIN_TIMEOUT))
|
|
break;
|
|
msleep(1);
|
|
}
|
|
if (!(reg16 & PCI_EXP_LNKSTA_LT))
|
|
return;
|
|
|
|
/* Training failed. Restore common clock configurations */
|
|
dev_printk(KERN_ERR, &parent->dev,
|
|
"ASPM: Could not configure common clock\n");
|
|
list_for_each_entry(child, &linkbus->devices, bus_list) {
|
|
cpos = pci_pcie_cap(child);
|
|
pci_write_config_word(child, cpos + PCI_EXP_LNKCTL,
|
|
child_reg[PCI_FUNC(child->devfn)]);
|
|
}
|
|
pci_write_config_word(parent, ppos + PCI_EXP_LNKCTL, parent_reg);
|
|
}
|
|
|
|
/* Convert L0s latency encoding to ns */
|
|
static u32 calc_l0s_latency(u32 encoding)
|
|
{
|
|
if (encoding == 0x7)
|
|
return (5 * 1000); /* > 4us */
|
|
return (64 << encoding);
|
|
}
|
|
|
|
/* Convert L0s acceptable latency encoding to ns */
|
|
static u32 calc_l0s_acceptable(u32 encoding)
|
|
{
|
|
if (encoding == 0x7)
|
|
return -1U;
|
|
return (64 << encoding);
|
|
}
|
|
|
|
/* Convert L1 latency encoding to ns */
|
|
static u32 calc_l1_latency(u32 encoding)
|
|
{
|
|
if (encoding == 0x7)
|
|
return (65 * 1000); /* > 64us */
|
|
return (1000 << encoding);
|
|
}
|
|
|
|
/* Convert L1 acceptable latency encoding to ns */
|
|
static u32 calc_l1_acceptable(u32 encoding)
|
|
{
|
|
if (encoding == 0x7)
|
|
return -1U;
|
|
return (1000 << encoding);
|
|
}
|
|
|
|
struct aspm_register_info {
|
|
u32 support:2;
|
|
u32 enabled:2;
|
|
u32 latency_encoding_l0s;
|
|
u32 latency_encoding_l1;
|
|
};
|
|
|
|
static void pcie_get_aspm_reg(struct pci_dev *pdev,
|
|
struct aspm_register_info *info)
|
|
{
|
|
int pos;
|
|
u16 reg16;
|
|
u32 reg32;
|
|
|
|
pos = pci_pcie_cap(pdev);
|
|
pci_read_config_dword(pdev, pos + PCI_EXP_LNKCAP, ®32);
|
|
info->support = (reg32 & PCI_EXP_LNKCAP_ASPMS) >> 10;
|
|
info->latency_encoding_l0s = (reg32 & PCI_EXP_LNKCAP_L0SEL) >> 12;
|
|
info->latency_encoding_l1 = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15;
|
|
pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
|
|
info->enabled = reg16 & PCI_EXP_LNKCTL_ASPMC;
|
|
}
|
|
|
|
static void pcie_aspm_check_latency(struct pci_dev *endpoint)
|
|
{
|
|
u32 latency, l1_switch_latency = 0;
|
|
struct aspm_latency *acceptable;
|
|
struct pcie_link_state *link;
|
|
|
|
/* Device not in D0 doesn't need latency check */
|
|
if ((endpoint->current_state != PCI_D0) &&
|
|
(endpoint->current_state != PCI_UNKNOWN))
|
|
return;
|
|
|
|
link = endpoint->bus->self->link_state;
|
|
acceptable = &link->acceptable[PCI_FUNC(endpoint->devfn)];
|
|
|
|
while (link) {
|
|
/* Check upstream direction L0s latency */
|
|
if ((link->aspm_capable & ASPM_STATE_L0S_UP) &&
|
|
(link->latency_up.l0s > acceptable->l0s))
|
|
link->aspm_capable &= ~ASPM_STATE_L0S_UP;
|
|
|
|
/* Check downstream direction L0s latency */
|
|
if ((link->aspm_capable & ASPM_STATE_L0S_DW) &&
|
|
(link->latency_dw.l0s > acceptable->l0s))
|
|
link->aspm_capable &= ~ASPM_STATE_L0S_DW;
|
|
/*
|
|
* Check L1 latency.
|
|
* Every switch on the path to root complex need 1
|
|
* more microsecond for L1. Spec doesn't mention L0s.
|
|
*/
|
|
latency = max_t(u32, link->latency_up.l1, link->latency_dw.l1);
|
|
if ((link->aspm_capable & ASPM_STATE_L1) &&
|
|
(latency + l1_switch_latency > acceptable->l1))
|
|
link->aspm_capable &= ~ASPM_STATE_L1;
|
|
l1_switch_latency += 1000;
|
|
|
|
link = link->parent;
|
|
}
|
|
}
|
|
|
|
static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
|
|
{
|
|
struct pci_dev *child, *parent = link->pdev;
|
|
struct pci_bus *linkbus = parent->subordinate;
|
|
struct aspm_register_info upreg, dwreg;
|
|
|
|
if (blacklist) {
|
|
/* Set enabled/disable so that we will disable ASPM later */
|
|
link->aspm_enabled = ASPM_STATE_ALL;
|
|
link->aspm_disable = ASPM_STATE_ALL;
|
|
return;
|
|
}
|
|
|
|
/* Configure common clock before checking latencies */
|
|
pcie_aspm_configure_common_clock(link);
|
|
|
|
/* Get upstream/downstream components' register state */
|
|
pcie_get_aspm_reg(parent, &upreg);
|
|
child = list_entry(linkbus->devices.next, struct pci_dev, bus_list);
|
|
pcie_get_aspm_reg(child, &dwreg);
|
|
|
|
/*
|
|
* Setup L0s state
|
|
*
|
|
* Note that we must not enable L0s in either direction on a
|
|
* given link unless components on both sides of the link each
|
|
* support L0s.
|
|
*/
|
|
if (dwreg.support & upreg.support & PCIE_LINK_STATE_L0S)
|
|
link->aspm_support |= ASPM_STATE_L0S;
|
|
if (dwreg.enabled & PCIE_LINK_STATE_L0S)
|
|
link->aspm_enabled |= ASPM_STATE_L0S_UP;
|
|
if (upreg.enabled & PCIE_LINK_STATE_L0S)
|
|
link->aspm_enabled |= ASPM_STATE_L0S_DW;
|
|
link->latency_up.l0s = calc_l0s_latency(upreg.latency_encoding_l0s);
|
|
link->latency_dw.l0s = calc_l0s_latency(dwreg.latency_encoding_l0s);
|
|
|
|
/* Setup L1 state */
|
|
if (upreg.support & dwreg.support & PCIE_LINK_STATE_L1)
|
|
link->aspm_support |= ASPM_STATE_L1;
|
|
if (upreg.enabled & dwreg.enabled & PCIE_LINK_STATE_L1)
|
|
link->aspm_enabled |= ASPM_STATE_L1;
|
|
link->latency_up.l1 = calc_l1_latency(upreg.latency_encoding_l1);
|
|
link->latency_dw.l1 = calc_l1_latency(dwreg.latency_encoding_l1);
|
|
|
|
/* Save default state */
|
|
link->aspm_default = link->aspm_enabled;
|
|
|
|
/* Setup initial capable state. Will be updated later */
|
|
link->aspm_capable = link->aspm_support;
|
|
/*
|
|
* If the downstream component has pci bridge function, don't
|
|
* do ASPM for now.
|
|
*/
|
|
list_for_each_entry(child, &linkbus->devices, bus_list) {
|
|
if (child->pcie_type == PCI_EXP_TYPE_PCI_BRIDGE) {
|
|
link->aspm_disable = ASPM_STATE_ALL;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Get and check endpoint acceptable latencies */
|
|
list_for_each_entry(child, &linkbus->devices, bus_list) {
|
|
int pos;
|
|
u32 reg32, encoding;
|
|
struct aspm_latency *acceptable =
|
|
&link->acceptable[PCI_FUNC(child->devfn)];
|
|
|
|
if (child->pcie_type != PCI_EXP_TYPE_ENDPOINT &&
|
|
child->pcie_type != PCI_EXP_TYPE_LEG_END)
|
|
continue;
|
|
|
|
pos = pci_pcie_cap(child);
|
|
pci_read_config_dword(child, pos + PCI_EXP_DEVCAP, ®32);
|
|
/* Calculate endpoint L0s acceptable latency */
|
|
encoding = (reg32 & PCI_EXP_DEVCAP_L0S) >> 6;
|
|
acceptable->l0s = calc_l0s_acceptable(encoding);
|
|
/* Calculate endpoint L1 acceptable latency */
|
|
encoding = (reg32 & PCI_EXP_DEVCAP_L1) >> 9;
|
|
acceptable->l1 = calc_l1_acceptable(encoding);
|
|
|
|
pcie_aspm_check_latency(child);
|
|
}
|
|
}
|
|
|
|
static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val)
|
|
{
|
|
u16 reg16;
|
|
int pos = pci_pcie_cap(pdev);
|
|
|
|
pci_read_config_word(pdev, pos + PCI_EXP_LNKCTL, ®16);
|
|
reg16 &= ~0x3;
|
|
reg16 |= val;
|
|
pci_write_config_word(pdev, pos + PCI_EXP_LNKCTL, reg16);
|
|
}
|
|
|
|
static void pcie_config_aspm_link(struct pcie_link_state *link, u32 state)
|
|
{
|
|
u32 upstream = 0, dwstream = 0;
|
|
struct pci_dev *child, *parent = link->pdev;
|
|
struct pci_bus *linkbus = parent->subordinate;
|
|
|
|
/* Nothing to do if the link is already in the requested state */
|
|
state &= (link->aspm_capable & ~link->aspm_disable);
|
|
if (link->aspm_enabled == state)
|
|
return;
|
|
/* Convert ASPM state to upstream/downstream ASPM register state */
|
|
if (state & ASPM_STATE_L0S_UP)
|
|
dwstream |= PCIE_LINK_STATE_L0S;
|
|
if (state & ASPM_STATE_L0S_DW)
|
|
upstream |= PCIE_LINK_STATE_L0S;
|
|
if (state & ASPM_STATE_L1) {
|
|
upstream |= PCIE_LINK_STATE_L1;
|
|
dwstream |= PCIE_LINK_STATE_L1;
|
|
}
|
|
/*
|
|
* Spec 2.0 suggests all functions should be configured the
|
|
* same setting for ASPM. Enabling ASPM L1 should be done in
|
|
* upstream component first and then downstream, and vice
|
|
* versa for disabling ASPM L1. Spec doesn't mention L0S.
|
|
*/
|
|
if (state & ASPM_STATE_L1)
|
|
pcie_config_aspm_dev(parent, upstream);
|
|
list_for_each_entry(child, &linkbus->devices, bus_list)
|
|
pcie_config_aspm_dev(child, dwstream);
|
|
if (!(state & ASPM_STATE_L1))
|
|
pcie_config_aspm_dev(parent, upstream);
|
|
|
|
link->aspm_enabled = state;
|
|
}
|
|
|
|
static void pcie_config_aspm_path(struct pcie_link_state *link)
|
|
{
|
|
while (link) {
|
|
pcie_config_aspm_link(link, policy_to_aspm_state(link));
|
|
link = link->parent;
|
|
}
|
|
}
|
|
|
|
static void free_link_state(struct pcie_link_state *link)
|
|
{
|
|
link->pdev->link_state = NULL;
|
|
kfree(link);
|
|
}
|
|
|
|
static int pcie_aspm_sanity_check(struct pci_dev *pdev)
|
|
{
|
|
struct pci_dev *child;
|
|
int pos;
|
|
u32 reg32;
|
|
|
|
/*
|
|
* Some functions in a slot might not all be PCIe functions,
|
|
* very strange. Disable ASPM for the whole slot
|
|
*/
|
|
list_for_each_entry(child, &pdev->subordinate->devices, bus_list) {
|
|
pos = pci_pcie_cap(child);
|
|
if (!pos)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* If ASPM is disabled then we're not going to change
|
|
* the BIOS state. It's safe to continue even if it's a
|
|
* pre-1.1 device
|
|
*/
|
|
|
|
if (aspm_disabled)
|
|
continue;
|
|
|
|
/*
|
|
* Disable ASPM for pre-1.1 PCIe device, we follow MS to use
|
|
* RBER bit to determine if a function is 1.1 version device
|
|
*/
|
|
pci_read_config_dword(child, pos + PCI_EXP_DEVCAP, ®32);
|
|
if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) {
|
|
dev_printk(KERN_INFO, &child->dev, "disabling ASPM"
|
|
" on pre-1.1 PCIe device. You can enable it"
|
|
" with 'pcie_aspm=force'\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct pcie_link_state *alloc_pcie_link_state(struct pci_dev *pdev)
|
|
{
|
|
struct pcie_link_state *link;
|
|
|
|
link = kzalloc(sizeof(*link), GFP_KERNEL);
|
|
if (!link)
|
|
return NULL;
|
|
INIT_LIST_HEAD(&link->sibling);
|
|
INIT_LIST_HEAD(&link->children);
|
|
INIT_LIST_HEAD(&link->link);
|
|
link->pdev = pdev;
|
|
if (pdev->pcie_type == PCI_EXP_TYPE_DOWNSTREAM) {
|
|
struct pcie_link_state *parent;
|
|
parent = pdev->bus->parent->self->link_state;
|
|
if (!parent) {
|
|
kfree(link);
|
|
return NULL;
|
|
}
|
|
link->parent = parent;
|
|
list_add(&link->link, &parent->children);
|
|
}
|
|
/* Setup a pointer to the root port link */
|
|
if (!link->parent)
|
|
link->root = link;
|
|
else
|
|
link->root = link->parent->root;
|
|
|
|
list_add(&link->sibling, &link_list);
|
|
pdev->link_state = link;
|
|
return link;
|
|
}
|
|
|
|
/*
|
|
* pcie_aspm_init_link_state: Initiate PCI express link state.
|
|
* It is called after the pcie and its children devices are scaned.
|
|
* @pdev: the root port or switch downstream port
|
|
*/
|
|
void pcie_aspm_init_link_state(struct pci_dev *pdev)
|
|
{
|
|
struct pcie_link_state *link;
|
|
int blacklist = !!pcie_aspm_sanity_check(pdev);
|
|
|
|
if (!pci_is_pcie(pdev) || pdev->link_state)
|
|
return;
|
|
if (pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
|
|
pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM)
|
|
return;
|
|
|
|
/* VIA has a strange chipset, root port is under a bridge */
|
|
if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT &&
|
|
pdev->bus->self)
|
|
return;
|
|
|
|
down_read(&pci_bus_sem);
|
|
if (list_empty(&pdev->subordinate->devices))
|
|
goto out;
|
|
|
|
mutex_lock(&aspm_lock);
|
|
link = alloc_pcie_link_state(pdev);
|
|
if (!link)
|
|
goto unlock;
|
|
/*
|
|
* Setup initial ASPM state. Note that we need to configure
|
|
* upstream links also because capable state of them can be
|
|
* update through pcie_aspm_cap_init().
|
|
*/
|
|
pcie_aspm_cap_init(link, blacklist);
|
|
|
|
/* Setup initial Clock PM state */
|
|
pcie_clkpm_cap_init(link, blacklist);
|
|
|
|
/*
|
|
* At this stage drivers haven't had an opportunity to change the
|
|
* link policy setting. Enabling ASPM on broken hardware can cripple
|
|
* it even before the driver has had a chance to disable ASPM, so
|
|
* default to a safe level right now. If we're enabling ASPM beyond
|
|
* the BIOS's expectation, we'll do so once pci_enable_device() is
|
|
* called.
|
|
*/
|
|
if (aspm_policy != POLICY_POWERSAVE) {
|
|
pcie_config_aspm_path(link);
|
|
pcie_set_clkpm(link, policy_to_clkpm_state(link));
|
|
}
|
|
|
|
unlock:
|
|
mutex_unlock(&aspm_lock);
|
|
out:
|
|
up_read(&pci_bus_sem);
|
|
}
|
|
|
|
/* Recheck latencies and update aspm_capable for links under the root */
|
|
static void pcie_update_aspm_capable(struct pcie_link_state *root)
|
|
{
|
|
struct pcie_link_state *link;
|
|
BUG_ON(root->parent);
|
|
list_for_each_entry(link, &link_list, sibling) {
|
|
if (link->root != root)
|
|
continue;
|
|
link->aspm_capable = link->aspm_support;
|
|
}
|
|
list_for_each_entry(link, &link_list, sibling) {
|
|
struct pci_dev *child;
|
|
struct pci_bus *linkbus = link->pdev->subordinate;
|
|
if (link->root != root)
|
|
continue;
|
|
list_for_each_entry(child, &linkbus->devices, bus_list) {
|
|
if ((child->pcie_type != PCI_EXP_TYPE_ENDPOINT) &&
|
|
(child->pcie_type != PCI_EXP_TYPE_LEG_END))
|
|
continue;
|
|
pcie_aspm_check_latency(child);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* @pdev: the endpoint device */
|
|
void pcie_aspm_exit_link_state(struct pci_dev *pdev)
|
|
{
|
|
struct pci_dev *parent = pdev->bus->self;
|
|
struct pcie_link_state *link, *root, *parent_link;
|
|
|
|
if (!pci_is_pcie(pdev) || !parent || !parent->link_state)
|
|
return;
|
|
if ((parent->pcie_type != PCI_EXP_TYPE_ROOT_PORT) &&
|
|
(parent->pcie_type != PCI_EXP_TYPE_DOWNSTREAM))
|
|
return;
|
|
|
|
down_read(&pci_bus_sem);
|
|
mutex_lock(&aspm_lock);
|
|
/*
|
|
* All PCIe functions are in one slot, remove one function will remove
|
|
* the whole slot, so just wait until we are the last function left.
|
|
*/
|
|
if (!list_is_last(&pdev->bus_list, &parent->subordinate->devices))
|
|
goto out;
|
|
|
|
link = parent->link_state;
|
|
root = link->root;
|
|
parent_link = link->parent;
|
|
|
|
/* All functions are removed, so just disable ASPM for the link */
|
|
pcie_config_aspm_link(link, 0);
|
|
list_del(&link->sibling);
|
|
list_del(&link->link);
|
|
/* Clock PM is for endpoint device */
|
|
free_link_state(link);
|
|
|
|
/* Recheck latencies and configure upstream links */
|
|
if (parent_link) {
|
|
pcie_update_aspm_capable(root);
|
|
pcie_config_aspm_path(parent_link);
|
|
}
|
|
out:
|
|
mutex_unlock(&aspm_lock);
|
|
up_read(&pci_bus_sem);
|
|
}
|
|
|
|
/* @pdev: the root port or switch downstream port */
|
|
void pcie_aspm_pm_state_change(struct pci_dev *pdev)
|
|
{
|
|
struct pcie_link_state *link = pdev->link_state;
|
|
|
|
if (aspm_disabled || !pci_is_pcie(pdev) || !link)
|
|
return;
|
|
if ((pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT) &&
|
|
(pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM))
|
|
return;
|
|
/*
|
|
* Devices changed PM state, we should recheck if latency
|
|
* meets all functions' requirement
|
|
*/
|
|
down_read(&pci_bus_sem);
|
|
mutex_lock(&aspm_lock);
|
|
pcie_update_aspm_capable(link->root);
|
|
pcie_config_aspm_path(link);
|
|
mutex_unlock(&aspm_lock);
|
|
up_read(&pci_bus_sem);
|
|
}
|
|
|
|
void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
|
|
{
|
|
struct pcie_link_state *link = pdev->link_state;
|
|
|
|
if (aspm_disabled || !pci_is_pcie(pdev) || !link)
|
|
return;
|
|
|
|
if (aspm_policy != POLICY_POWERSAVE)
|
|
return;
|
|
|
|
if ((pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT) &&
|
|
(pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM))
|
|
return;
|
|
|
|
down_read(&pci_bus_sem);
|
|
mutex_lock(&aspm_lock);
|
|
pcie_config_aspm_path(link);
|
|
pcie_set_clkpm(link, policy_to_clkpm_state(link));
|
|
mutex_unlock(&aspm_lock);
|
|
up_read(&pci_bus_sem);
|
|
}
|
|
|
|
/*
|
|
* pci_disable_link_state - disable pci device's link state, so the link will
|
|
* never enter specific states
|
|
*/
|
|
static void __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem,
|
|
bool force)
|
|
{
|
|
struct pci_dev *parent = pdev->bus->self;
|
|
struct pcie_link_state *link;
|
|
|
|
if (aspm_disabled && !force)
|
|
return;
|
|
|
|
if (!pci_is_pcie(pdev))
|
|
return;
|
|
|
|
if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT ||
|
|
pdev->pcie_type == PCI_EXP_TYPE_DOWNSTREAM)
|
|
parent = pdev;
|
|
if (!parent || !parent->link_state)
|
|
return;
|
|
|
|
if (sem)
|
|
down_read(&pci_bus_sem);
|
|
mutex_lock(&aspm_lock);
|
|
link = parent->link_state;
|
|
if (state & PCIE_LINK_STATE_L0S)
|
|
link->aspm_disable |= ASPM_STATE_L0S;
|
|
if (state & PCIE_LINK_STATE_L1)
|
|
link->aspm_disable |= ASPM_STATE_L1;
|
|
pcie_config_aspm_link(link, policy_to_aspm_state(link));
|
|
|
|
if (state & PCIE_LINK_STATE_CLKPM) {
|
|
link->clkpm_capable = 0;
|
|
pcie_set_clkpm(link, 0);
|
|
}
|
|
mutex_unlock(&aspm_lock);
|
|
if (sem)
|
|
up_read(&pci_bus_sem);
|
|
}
|
|
|
|
void pci_disable_link_state_locked(struct pci_dev *pdev, int state)
|
|
{
|
|
__pci_disable_link_state(pdev, state, false, false);
|
|
}
|
|
EXPORT_SYMBOL(pci_disable_link_state_locked);
|
|
|
|
void pci_disable_link_state(struct pci_dev *pdev, int state)
|
|
{
|
|
__pci_disable_link_state(pdev, state, true, false);
|
|
}
|
|
EXPORT_SYMBOL(pci_disable_link_state);
|
|
|
|
void pcie_clear_aspm(struct pci_bus *bus)
|
|
{
|
|
struct pci_dev *child;
|
|
|
|
/*
|
|
* Clear any ASPM setup that the firmware has carried out on this bus
|
|
*/
|
|
list_for_each_entry(child, &bus->devices, bus_list) {
|
|
__pci_disable_link_state(child, PCIE_LINK_STATE_L0S |
|
|
PCIE_LINK_STATE_L1 |
|
|
PCIE_LINK_STATE_CLKPM,
|
|
false, true);
|
|
}
|
|
}
|
|
|
|
static int pcie_aspm_set_policy(const char *val, struct kernel_param *kp)
|
|
{
|
|
int i;
|
|
struct pcie_link_state *link;
|
|
|
|
if (aspm_disabled)
|
|
return -EPERM;
|
|
for (i = 0; i < ARRAY_SIZE(policy_str); i++)
|
|
if (!strncmp(val, policy_str[i], strlen(policy_str[i])))
|
|
break;
|
|
if (i >= ARRAY_SIZE(policy_str))
|
|
return -EINVAL;
|
|
if (i == aspm_policy)
|
|
return 0;
|
|
|
|
down_read(&pci_bus_sem);
|
|
mutex_lock(&aspm_lock);
|
|
aspm_policy = i;
|
|
list_for_each_entry(link, &link_list, sibling) {
|
|
pcie_config_aspm_link(link, policy_to_aspm_state(link));
|
|
pcie_set_clkpm(link, policy_to_clkpm_state(link));
|
|
}
|
|
mutex_unlock(&aspm_lock);
|
|
up_read(&pci_bus_sem);
|
|
return 0;
|
|
}
|
|
|
|
static int pcie_aspm_get_policy(char *buffer, struct kernel_param *kp)
|
|
{
|
|
int i, cnt = 0;
|
|
for (i = 0; i < ARRAY_SIZE(policy_str); i++)
|
|
if (i == aspm_policy)
|
|
cnt += sprintf(buffer + cnt, "[%s] ", policy_str[i]);
|
|
else
|
|
cnt += sprintf(buffer + cnt, "%s ", policy_str[i]);
|
|
return cnt;
|
|
}
|
|
|
|
module_param_call(policy, pcie_aspm_set_policy, pcie_aspm_get_policy,
|
|
NULL, 0644);
|
|
|
|
#ifdef CONFIG_PCIEASPM_DEBUG
|
|
static ssize_t link_state_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct pci_dev *pci_device = to_pci_dev(dev);
|
|
struct pcie_link_state *link_state = pci_device->link_state;
|
|
|
|
return sprintf(buf, "%d\n", link_state->aspm_enabled);
|
|
}
|
|
|
|
static ssize_t link_state_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf,
|
|
size_t n)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
struct pcie_link_state *link, *root = pdev->link_state->root;
|
|
u32 val = buf[0] - '0', state = 0;
|
|
|
|
if (aspm_disabled)
|
|
return -EPERM;
|
|
if (n < 1 || val > 3)
|
|
return -EINVAL;
|
|
|
|
/* Convert requested state to ASPM state */
|
|
if (val & PCIE_LINK_STATE_L0S)
|
|
state |= ASPM_STATE_L0S;
|
|
if (val & PCIE_LINK_STATE_L1)
|
|
state |= ASPM_STATE_L1;
|
|
|
|
down_read(&pci_bus_sem);
|
|
mutex_lock(&aspm_lock);
|
|
list_for_each_entry(link, &link_list, sibling) {
|
|
if (link->root != root)
|
|
continue;
|
|
pcie_config_aspm_link(link, state);
|
|
}
|
|
mutex_unlock(&aspm_lock);
|
|
up_read(&pci_bus_sem);
|
|
return n;
|
|
}
|
|
|
|
static ssize_t clk_ctl_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct pci_dev *pci_device = to_pci_dev(dev);
|
|
struct pcie_link_state *link_state = pci_device->link_state;
|
|
|
|
return sprintf(buf, "%d\n", link_state->clkpm_enabled);
|
|
}
|
|
|
|
static ssize_t clk_ctl_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf,
|
|
size_t n)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(dev);
|
|
int state;
|
|
|
|
if (n < 1)
|
|
return -EINVAL;
|
|
state = buf[0]-'0';
|
|
|
|
down_read(&pci_bus_sem);
|
|
mutex_lock(&aspm_lock);
|
|
pcie_set_clkpm_nocheck(pdev->link_state, !!state);
|
|
mutex_unlock(&aspm_lock);
|
|
up_read(&pci_bus_sem);
|
|
|
|
return n;
|
|
}
|
|
|
|
static DEVICE_ATTR(link_state, 0644, link_state_show, link_state_store);
|
|
static DEVICE_ATTR(clk_ctl, 0644, clk_ctl_show, clk_ctl_store);
|
|
|
|
static char power_group[] = "power";
|
|
void pcie_aspm_create_sysfs_dev_files(struct pci_dev *pdev)
|
|
{
|
|
struct pcie_link_state *link_state = pdev->link_state;
|
|
|
|
if (!pci_is_pcie(pdev) ||
|
|
(pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
|
|
pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) || !link_state)
|
|
return;
|
|
|
|
if (link_state->aspm_support)
|
|
sysfs_add_file_to_group(&pdev->dev.kobj,
|
|
&dev_attr_link_state.attr, power_group);
|
|
if (link_state->clkpm_capable)
|
|
sysfs_add_file_to_group(&pdev->dev.kobj,
|
|
&dev_attr_clk_ctl.attr, power_group);
|
|
}
|
|
|
|
void pcie_aspm_remove_sysfs_dev_files(struct pci_dev *pdev)
|
|
{
|
|
struct pcie_link_state *link_state = pdev->link_state;
|
|
|
|
if (!pci_is_pcie(pdev) ||
|
|
(pdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT &&
|
|
pdev->pcie_type != PCI_EXP_TYPE_DOWNSTREAM) || !link_state)
|
|
return;
|
|
|
|
if (link_state->aspm_support)
|
|
sysfs_remove_file_from_group(&pdev->dev.kobj,
|
|
&dev_attr_link_state.attr, power_group);
|
|
if (link_state->clkpm_capable)
|
|
sysfs_remove_file_from_group(&pdev->dev.kobj,
|
|
&dev_attr_clk_ctl.attr, power_group);
|
|
}
|
|
#endif
|
|
|
|
static int __init pcie_aspm_disable(char *str)
|
|
{
|
|
if (!strcmp(str, "off")) {
|
|
aspm_policy = POLICY_DEFAULT;
|
|
aspm_disabled = 1;
|
|
aspm_support_enabled = false;
|
|
printk(KERN_INFO "PCIe ASPM is disabled\n");
|
|
} else if (!strcmp(str, "force")) {
|
|
aspm_force = 1;
|
|
printk(KERN_INFO "PCIe ASPM is forcibly enabled\n");
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
__setup("pcie_aspm=", pcie_aspm_disable);
|
|
|
|
void pcie_no_aspm(void)
|
|
{
|
|
/*
|
|
* Disabling ASPM is intended to prevent the kernel from modifying
|
|
* existing hardware state, not to clear existing state. To that end:
|
|
* (a) set policy to POLICY_DEFAULT in order to avoid changing state
|
|
* (b) prevent userspace from changing policy
|
|
*/
|
|
if (!aspm_force) {
|
|
aspm_policy = POLICY_DEFAULT;
|
|
aspm_disabled = 1;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* pcie_aspm_enabled - is PCIe ASPM enabled?
|
|
*
|
|
* Returns true if ASPM has not been disabled by the command-line option
|
|
* pcie_aspm=off.
|
|
**/
|
|
int pcie_aspm_enabled(void)
|
|
{
|
|
return !aspm_disabled;
|
|
}
|
|
EXPORT_SYMBOL(pcie_aspm_enabled);
|
|
|
|
bool pcie_aspm_support_enabled(void)
|
|
{
|
|
return aspm_support_enabled;
|
|
}
|
|
EXPORT_SYMBOL(pcie_aspm_support_enabled);
|