davidlt/kernel-ark
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
7cc5c8559c
kernel-ark/drivers/serial
History
Mark Fortescue 7cc5c8559c [SERIAL] sunzilog: Interrupt enable before ISR handler installed 
This patch changes the interrupt enable sequence for the sunzilog driver 
so that interrupts are not enabled untill after the interrupt handler has 
been installed. If this is not done, some SS1 and SS2 sun4c systems panic 
on un-handled interrupt before the handler gets installed preventing boot.

It also adds in support for the ESCC version of the zilog chips. The
changes mean that the FIFO will be enabled for ESCC versions of the
SCC UART. My interpretation of the SCC manual and the existing interrupt
handler code is that it sould be able to make good use of the FIFO without
issues.

Signed-off-by: Mark Fortescue <mark@mtfhpc.demon.co.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2007-05-09 13:49:04 -07:00
..
cpm_uart SPIN_LOCK_UNLOCKED cleanup in drivers/serial 2007-05-08 11:15:11 -07:00
jsm Subject: jsm driver fix for linuxpps support 2007-05-08 11:15:03 -07:00
8250_accent.c
8250_acorn.c [PATCH] serial: replace kmalloc+memset with kzalloc 2007-02-14 08:09:52 -08:00
8250_au1x00.c
8250_boca.c
8250_early.c
8250_exar_st16c554.c [PATCH] Exar quad port serial 2006-12-07 08:39:35 -08:00
8250_fourport.c
8250_gsc.c [PARISC] Clean up asm-parisc/serial.h 2006-10-04 06:47:03 -06:00
8250_hp300.c
8250_hub6.c
8250_mca.c
8250_pci.c [PATCH] remove many unneeded #includes of sched.h 2007-02-14 08:09:54 -08:00
8250_pnp.c [PATCH] add Fujitsu Siemens Tablet PC devices to 8250_pnp.c 2007-03-23 11:01:22 -07:00
8250.c 8250: Remove commented out irq cruft 2007-05-08 11:15:15 -07:00
8250.h
21285.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
68328serial.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
68328serial.h
68360serial.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
amba-pl010.c [ARM] Convert AMBA PL010 driver to use the clk infrastructure 2007-04-22 12:30:41 +01:00
amba-pl011.c [ARM] Fix AMBA serial drivers for non-first serial ports 2007-01-24 11:59:57 +00:00
atmel_serial.c [ARM] 4357/1: AT91: Support slower serial baud-rates 2007-05-03 14:12:45 +01:00
atmel_serial.h [ARM] 4357/1: AT91: Support slower serial baud-rates 2007-05-03 14:12:45 +01:00
bfin_5xx.c blackfin: serial driver 2007-05-07 12:12:58 -07:00
clps711x.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
crisv10.c [PATCH] Char: tty_wakeup cleanup 2007-02-11 10:51:26 -08:00
dz.c [PATCH] dz: remove struct pt_regs references 2007-03-05 07:57:51 -08:00
dz.h [PATCH] dz: Fixes to make it work 2006-12-07 08:39:41 -08:00
icom.c header cleaning: don't include smp_lock.h when not used 2007-05-08 11:15:07 -07:00
icom.h do not truncate irq number for icom adapter 2007-04-24 08:23:08 -07:00
imx.c [ARM] 4328/1: Move i.MX UART regs to driver 2007-05-03 20:24:21 +01:00
ioc3_serial.c [PATCH] serial: replace kmalloc+memset with kzalloc 2007-02-14 08:09:52 -08:00
ioc4_serial.c [PATCH] serial: replace kmalloc+memset with kzalloc 2007-02-14 08:09:52 -08:00
ip22zilog.c [PATCH] remove many unneeded #includes of sched.h 2007-02-14 08:09:54 -08:00
ip22zilog.h
Kconfig x86, serial: convert legacy COM ports to platform devices 2007-05-08 11:15:23 -07:00
m32r_sio_reg.h
m32r_sio.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
m32r_sio.h
Makefile blackfin: serial driver 2007-05-07 12:12:58 -07:00
mcfserial.c [PATCH] m68knommu: fix work queues in mcfserial.c driver 2007-03-06 18:08:38 -08:00
mcfserial.h
mpc52xx_uart.c [POWERPC] Don't shutdown TX on mpc5200 serial port if it is a console 2007-05-07 20:31:15 +10:00
mpsc.c MPSC serial driver tx locking 2007-05-07 12:12:50 -07:00
mux.c Merge branch 'parisc' from /home/kyle/repos/parisc-2.6.git 2007-02-17 00:18:23 -05:00
netx-serial.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
of_serial.c Merge branch 'linux-2.6' 2007-05-08 13:37:51 +10:00
pmac_zilog.c [POWERPC] Rename device_is_compatible to of_device_is_compatible 2007-05-07 20:31:14 +10:00
pmac_zilog.h [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
pnx8xxx_uart.c [PATCH] PNX8550 UART driver 2007-02-14 08:09:52 -08:00
pxa.c [ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXX 2007-04-21 23:14:01 +01:00
s3c2410.c SPIN_LOCK_UNLOCKED cleanup in drivers/serial 2007-05-08 11:15:11 -07:00
sa1100.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
serial_core.c Serial: serial_core, use pr_debug 2007-05-07 12:12:51 -07:00
serial_cs.c serial: Add PCMCIA IDs for Quatech DSP-100 dual RS232 adapter. 2007-02-16 15:19:16 -08:00
serial_lh7a40x.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
serial_txx9.c serial_txx9: zap changelog from source code 2007-05-08 11:15:12 -07:00
sh-sci.c serial: sh-sci: Fix module clock refcount for serial console. 2007-05-07 02:11:56 +00:00
sh-sci.h sh: MS7712SE01 board support. 2007-05-07 02:10:54 +00:00
sn_console.c [PATCH] 2.6 Altix: console fix for CONFIG_DEBUG_SHIRQ usage 2007-03-08 07:39:15 -08:00
suncore.c
suncore.h
sunhv.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
sunsab.c [PATCH] remove many unneeded #includes of sched.h 2007-02-14 08:09:54 -08:00
sunsab.h
sunsu.c [SERIAL] sunsu: Fix section mismatch warnings. 2007-05-07 00:14:13 -07:00
sunzilog.c [SERIAL] sunzilog: Interrupt enable before ISR handler installed 2007-05-09 13:49:04 -07:00
sunzilog.h [SERIAL] sunzilog: Interrupt enable before ISR handler installed 2007-05-09 13:49:04 -07:00
uartlite.c [PATCH] drivers/serial NULL noise removal 2007-02-09 09:14:06 -08:00
v850e_uart.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00
vr41xx_siu.c [PATCH] tty: switch to ktermios 2006-12-08 08:28:57 -08:00