kernel-ark/fs/xfs/linux-2.6/xfs_discard.c
Lukas Czerner be715140b5 xfs: check if device support discard in xfs_ioc_trim()
Right now we, are relying on the fact that when we attempt to
actually do the discard, blkdev_issue_discar() returns -EOPNOTSUPP
and the user is informed that the device does not support discard.

However, in the case where the we do not hit any suitable free
extent to trim in FITRIM code, it will finish without any error.
This is very confusing, because it seems that FITRIM was successful
even though the device does not actually supports discard.

Solution: Check for the discard support before attempt to search for
free extents.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
2011-02-22 15:08:44 -06:00

194 lines
5.2 KiB
C

/*
* Copyright (C) 2010 Red Hat, Inc.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "xfs.h"
#include "xfs_sb.h"
#include "xfs_inum.h"
#include "xfs_log.h"
#include "xfs_ag.h"
#include "xfs_mount.h"
#include "xfs_quota.h"
#include "xfs_trans.h"
#include "xfs_alloc_btree.h"
#include "xfs_bmap_btree.h"
#include "xfs_ialloc_btree.h"
#include "xfs_btree.h"
#include "xfs_inode.h"
#include "xfs_alloc.h"
#include "xfs_error.h"
#include "xfs_discard.h"
#include "xfs_trace.h"
STATIC int
xfs_trim_extents(
struct xfs_mount *mp,
xfs_agnumber_t agno,
xfs_fsblock_t start,
xfs_fsblock_t len,
xfs_fsblock_t minlen,
__uint64_t *blocks_trimmed)
{
struct block_device *bdev = mp->m_ddev_targp->bt_bdev;
struct xfs_btree_cur *cur;
struct xfs_buf *agbp;
struct xfs_perag *pag;
int error;
int i;
pag = xfs_perag_get(mp, agno);
error = xfs_alloc_read_agf(mp, NULL, agno, 0, &agbp);
if (error || !agbp)
goto out_put_perag;
cur = xfs_allocbt_init_cursor(mp, NULL, agbp, agno, XFS_BTNUM_CNT);
/*
* Force out the log. This means any transactions that might have freed
* space before we took the AGF buffer lock are now on disk, and the
* volatile disk cache is flushed.
*/
xfs_log_force(mp, XFS_LOG_SYNC);
/*
* Look up the longest btree in the AGF and start with it.
*/
error = xfs_alloc_lookup_le(cur, 0,
XFS_BUF_TO_AGF(agbp)->agf_longest, &i);
if (error)
goto out_del_cursor;
/*
* Loop until we are done with all extents that are large
* enough to be worth discarding.
*/
while (i) {
xfs_agblock_t fbno;
xfs_extlen_t flen;
error = xfs_alloc_get_rec(cur, &fbno, &flen, &i);
if (error)
goto out_del_cursor;
XFS_WANT_CORRUPTED_GOTO(i == 1, out_del_cursor);
ASSERT(flen <= XFS_BUF_TO_AGF(agbp)->agf_longest);
/*
* Too small? Give up.
*/
if (flen < minlen) {
trace_xfs_discard_toosmall(mp, agno, fbno, flen);
goto out_del_cursor;
}
/*
* If the extent is entirely outside of the range we are
* supposed to discard skip it. Do not bother to trim
* down partially overlapping ranges for now.
*/
if (XFS_AGB_TO_FSB(mp, agno, fbno) + flen < start ||
XFS_AGB_TO_FSB(mp, agno, fbno) >= start + len) {
trace_xfs_discard_exclude(mp, agno, fbno, flen);
goto next_extent;
}
/*
* If any blocks in the range are still busy, skip the
* discard and try again the next time.
*/
if (xfs_alloc_busy_search(mp, agno, fbno, flen)) {
trace_xfs_discard_busy(mp, agno, fbno, flen);
goto next_extent;
}
trace_xfs_discard_extent(mp, agno, fbno, flen);
error = -blkdev_issue_discard(bdev,
XFS_AGB_TO_DADDR(mp, agno, fbno),
XFS_FSB_TO_BB(mp, flen),
GFP_NOFS, 0);
if (error)
goto out_del_cursor;
*blocks_trimmed += flen;
next_extent:
error = xfs_btree_decrement(cur, 0, &i);
if (error)
goto out_del_cursor;
}
out_del_cursor:
xfs_btree_del_cursor(cur, error ? XFS_BTREE_ERROR : XFS_BTREE_NOERROR);
xfs_buf_relse(agbp);
out_put_perag:
xfs_perag_put(pag);
return error;
}
int
xfs_ioc_trim(
struct xfs_mount *mp,
struct fstrim_range __user *urange)
{
struct request_queue *q = mp->m_ddev_targp->bt_bdev->bd_disk->queue;
unsigned int granularity = q->limits.discard_granularity;
struct fstrim_range range;
xfs_fsblock_t start, len, minlen;
xfs_agnumber_t start_agno, end_agno, agno;
__uint64_t blocks_trimmed = 0;
int error, last_error = 0;
if (!capable(CAP_SYS_ADMIN))
return -XFS_ERROR(EPERM);
if (!blk_queue_discard(q))
return -XFS_ERROR(EOPNOTSUPP);
if (copy_from_user(&range, urange, sizeof(range)))
return -XFS_ERROR(EFAULT);
/*
* Truncating down the len isn't actually quite correct, but using
* XFS_B_TO_FSB would mean we trivially get overflows for values
* of ULLONG_MAX or slightly lower. And ULLONG_MAX is the default
* used by the fstrim application. In the end it really doesn't
* matter as trimming blocks is an advisory interface.
*/
start = XFS_B_TO_FSBT(mp, range.start);
len = XFS_B_TO_FSBT(mp, range.len);
minlen = XFS_B_TO_FSB(mp, max_t(u64, granularity, range.minlen));
start_agno = XFS_FSB_TO_AGNO(mp, start);
if (start_agno >= mp->m_sb.sb_agcount)
return -XFS_ERROR(EINVAL);
end_agno = XFS_FSB_TO_AGNO(mp, start + len);
if (end_agno >= mp->m_sb.sb_agcount)
end_agno = mp->m_sb.sb_agcount - 1;
for (agno = start_agno; agno <= end_agno; agno++) {
error = -xfs_trim_extents(mp, agno, start, len, minlen,
&blocks_trimmed);
if (error)
last_error = error;
}
if (last_error)
return last_error;
range.len = XFS_FSB_TO_B(mp, blocks_trimmed);
if (copy_to_user(urange, &range, sizeof(range)))
return -XFS_ERROR(EFAULT);
return 0;
}