7996a778ff
There is a lot of code duplcited between iscsi_tcp and the upcoming iscsi_iser driver. This patch puts the duplicated code in a lib. There is more code to move around but this takes care of the basics. For iscsi_offload if they use the lib we will probably move some things around. For example in the queuecommand we will not assume that the LLD wants to do queue_work, but it is better to handle that later when we know for sure what iscsi_offload looks like (we could probably do this for iscsi_iser though to). Ideally I would like to get the iscsi_transports modules to a place where all they really have to do is put data on the wire, but how to do that will hopefully be more clear when we see other modules like iscsi_offload. Or maybe iscsi_offload will not use the lib and it will just be iscsi_iser and iscsi_tcp and maybe the iscsi_tcp_tgt if that is allowed in mainline. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
192 lines
7.5 KiB
Makefile
192 lines
7.5 KiB
Makefile
#
|
|
# Makefile for linux/drivers/scsi
|
|
#
|
|
# 30 May 2000, Christoph Hellwig <hch@infradead.org>
|
|
# Rewritten to use lists instead of if-statements.
|
|
#
|
|
# 20 Sep 2000, Torben Mathiasen <tmm@image.dk>
|
|
# Changed link order to reflect new scsi initialization.
|
|
#
|
|
# *!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!
|
|
# The link order must be, SCSI Core, SCSI HBA drivers, and
|
|
# lastly SCSI peripheral drivers (disk/tape/cdrom/etc.) to
|
|
# satisfy certain initialization assumptions in the SCSI layer.
|
|
# *!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!*!
|
|
|
|
|
|
CFLAGS_aha152x.o = -DAHA152X_STAT -DAUTOCONF
|
|
CFLAGS_gdth.o = # -DDEBUG_GDTH=2 -D__SERIAL__ -D__COM2__ -DGDTH_STATISTICS
|
|
CFLAGS_seagate.o = -DARBITRATE -DPARITY -DSEAGATE_USE_ASM
|
|
|
|
subdir-$(CONFIG_PCMCIA) += pcmcia
|
|
|
|
obj-$(CONFIG_SCSI) += scsi_mod.o
|
|
|
|
obj-$(CONFIG_RAID_ATTRS) += raid_class.o
|
|
|
|
# --- NOTE ORDERING HERE ---
|
|
# For kernel non-modular link, transport attributes need to
|
|
# be initialised before drivers
|
|
# --------------------------
|
|
obj-$(CONFIG_SCSI_SPI_ATTRS) += scsi_transport_spi.o
|
|
obj-$(CONFIG_SCSI_FC_ATTRS) += scsi_transport_fc.o
|
|
obj-$(CONFIG_SCSI_ISCSI_ATTRS) += scsi_transport_iscsi.o
|
|
obj-$(CONFIG_SCSI_SAS_ATTRS) += scsi_transport_sas.o
|
|
|
|
obj-$(CONFIG_ISCSI_TCP) += libiscsi.o iscsi_tcp.o
|
|
obj-$(CONFIG_SCSI_AMIGA7XX) += amiga7xx.o 53c7xx.o
|
|
obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o
|
|
obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o
|
|
obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o
|
|
obj-$(CONFIG_MVME147_SCSI) += mvme147.o wd33c93.o
|
|
obj-$(CONFIG_SGIWD93_SCSI) += sgiwd93.o wd33c93.o
|
|
obj-$(CONFIG_CYBERSTORM_SCSI) += NCR53C9x.o cyberstorm.o
|
|
obj-$(CONFIG_CYBERSTORMII_SCSI) += NCR53C9x.o cyberstormII.o
|
|
obj-$(CONFIG_BLZ2060_SCSI) += NCR53C9x.o blz2060.o
|
|
obj-$(CONFIG_BLZ1230_SCSI) += NCR53C9x.o blz1230.o
|
|
obj-$(CONFIG_FASTLANE_SCSI) += NCR53C9x.o fastlane.o
|
|
obj-$(CONFIG_OKTAGON_SCSI) += NCR53C9x.o oktagon_esp_mod.o
|
|
obj-$(CONFIG_ATARI_SCSI) += atari_scsi.o
|
|
obj-$(CONFIG_MAC_SCSI) += mac_scsi.o
|
|
obj-$(CONFIG_SCSI_MAC_ESP) += mac_esp.o NCR53C9x.o
|
|
obj-$(CONFIG_SUN3_SCSI) += sun3_scsi.o sun3_scsi_vme.o
|
|
obj-$(CONFIG_MVME16x_SCSI) += mvme16x.o 53c7xx.o
|
|
obj-$(CONFIG_BVME6000_SCSI) += bvme6000.o 53c7xx.o
|
|
obj-$(CONFIG_SCSI_SIM710) += 53c700.o sim710.o
|
|
obj-$(CONFIG_SCSI_ADVANSYS) += advansys.o
|
|
obj-$(CONFIG_SCSI_PSI240I) += psi240i.o
|
|
obj-$(CONFIG_SCSI_BUSLOGIC) += BusLogic.o
|
|
obj-$(CONFIG_SCSI_DPT_I2O) += dpt_i2o.o
|
|
obj-$(CONFIG_SCSI_U14_34F) += u14-34f.o
|
|
obj-$(CONFIG_SCSI_ULTRASTOR) += ultrastor.o
|
|
obj-$(CONFIG_SCSI_AHA152X) += aha152x.o
|
|
obj-$(CONFIG_SCSI_AHA1542) += aha1542.o
|
|
obj-$(CONFIG_SCSI_AHA1740) += aha1740.o
|
|
obj-$(CONFIG_SCSI_AIC7XXX) += aic7xxx/
|
|
obj-$(CONFIG_SCSI_AIC79XX) += aic7xxx/
|
|
obj-$(CONFIG_SCSI_AACRAID) += aacraid/
|
|
obj-$(CONFIG_SCSI_AIC7XXX_OLD) += aic7xxx_old.o
|
|
obj-$(CONFIG_SCSI_IPS) += ips.o
|
|
obj-$(CONFIG_SCSI_FD_MCS) += fd_mcs.o
|
|
obj-$(CONFIG_SCSI_FUTURE_DOMAIN)+= fdomain.o
|
|
obj-$(CONFIG_SCSI_IN2000) += in2000.o
|
|
obj-$(CONFIG_SCSI_GENERIC_NCR5380) += g_NCR5380.o
|
|
obj-$(CONFIG_SCSI_GENERIC_NCR5380_MMIO) += g_NCR5380_mmio.o
|
|
obj-$(CONFIG_SCSI_NCR53C406A) += NCR53c406a.o
|
|
obj-$(CONFIG_SCSI_NCR_D700) += 53c700.o NCR_D700.o
|
|
obj-$(CONFIG_SCSI_NCR_Q720) += NCR_Q720_mod.o
|
|
obj-$(CONFIG_SCSI_SYM53C416) += sym53c416.o
|
|
obj-$(CONFIG_SCSI_QLOGIC_FAS) += qlogicfas408.o qlogicfas.o
|
|
obj-$(CONFIG_PCMCIA_QLOGIC) += qlogicfas408.o
|
|
obj-$(CONFIG_SCSI_QLOGIC_FC) += qlogicfc.o
|
|
obj-$(CONFIG_SCSI_QLOGIC_1280) += qla1280.o
|
|
obj-$(CONFIG_SCSI_QLA_FC) += qla2xxx/
|
|
obj-$(CONFIG_SCSI_LPFC) += lpfc/
|
|
obj-$(CONFIG_SCSI_PAS16) += pas16.o
|
|
obj-$(CONFIG_SCSI_SEAGATE) += seagate.o
|
|
obj-$(CONFIG_SCSI_FD_8xx) += seagate.o
|
|
obj-$(CONFIG_SCSI_T128) += t128.o
|
|
obj-$(CONFIG_SCSI_DMX3191D) += dmx3191d.o
|
|
obj-$(CONFIG_SCSI_DTC3280) += dtc.o
|
|
obj-$(CONFIG_SCSI_SYM53C8XX_2) += sym53c8xx_2/
|
|
obj-$(CONFIG_SCSI_ZALON) += zalon7xx.o
|
|
obj-$(CONFIG_SCSI_EATA_PIO) += eata_pio.o
|
|
obj-$(CONFIG_SCSI_7000FASST) += wd7000.o
|
|
obj-$(CONFIG_SCSI_MCA_53C9X) += NCR53C9x.o mca_53c9x.o
|
|
obj-$(CONFIG_SCSI_IBMMCA) += ibmmca.o
|
|
obj-$(CONFIG_SCSI_EATA) += eata.o
|
|
obj-$(CONFIG_SCSI_DC395x) += dc395x.o
|
|
obj-$(CONFIG_SCSI_DC390T) += tmscsim.o
|
|
obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o
|
|
obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/
|
|
obj-$(CONFIG_MEGARAID_SAS) += megaraid/
|
|
obj-$(CONFIG_SCSI_ACARD) += atp870u.o
|
|
obj-$(CONFIG_SCSI_SUNESP) += esp.o
|
|
obj-$(CONFIG_SCSI_GDTH) += gdth.o
|
|
obj-$(CONFIG_SCSI_INITIO) += initio.o
|
|
obj-$(CONFIG_SCSI_INIA100) += a100u2w.o
|
|
obj-$(CONFIG_SCSI_QLOGICPTI) += qlogicpti.o
|
|
obj-$(CONFIG_BLK_DEV_IDESCSI) += ide-scsi.o
|
|
obj-$(CONFIG_SCSI_MESH) += mesh.o
|
|
obj-$(CONFIG_SCSI_MAC53C94) += mac53c94.o
|
|
obj-$(CONFIG_SCSI_PLUTO) += pluto.o
|
|
obj-$(CONFIG_SCSI_DECNCR) += NCR53C9x.o dec_esp.o
|
|
obj-$(CONFIG_BLK_DEV_3W_XXXX_RAID) += 3w-xxxx.o
|
|
obj-$(CONFIG_SCSI_3W_9XXX) += 3w-9xxx.o
|
|
obj-$(CONFIG_SCSI_PPA) += ppa.o
|
|
obj-$(CONFIG_SCSI_IMM) += imm.o
|
|
obj-$(CONFIG_JAZZ_ESP) += NCR53C9x.o jazz_esp.o
|
|
obj-$(CONFIG_SUN3X_ESP) += NCR53C9x.o sun3x_esp.o
|
|
obj-$(CONFIG_SCSI_FCAL) += fcal.o
|
|
obj-$(CONFIG_SCSI_LASI700) += 53c700.o lasi700.o
|
|
obj-$(CONFIG_SCSI_NSP32) += nsp32.o
|
|
obj-$(CONFIG_SCSI_IPR) += ipr.o
|
|
obj-$(CONFIG_SCSI_IBMVSCSI) += ibmvscsi/
|
|
obj-$(CONFIG_SCSI_SATA_AHCI) += libata.o ahci.o
|
|
obj-$(CONFIG_SCSI_SATA_SVW) += libata.o sata_svw.o
|
|
obj-$(CONFIG_SCSI_ATA_PIIX) += libata.o ata_piix.o
|
|
obj-$(CONFIG_SCSI_SATA_PROMISE) += libata.o sata_promise.o
|
|
obj-$(CONFIG_SCSI_SATA_QSTOR) += libata.o sata_qstor.o
|
|
obj-$(CONFIG_SCSI_SATA_SIL) += libata.o sata_sil.o
|
|
obj-$(CONFIG_SCSI_SATA_SIL24) += libata.o sata_sil24.o
|
|
obj-$(CONFIG_SCSI_SATA_VIA) += libata.o sata_via.o
|
|
obj-$(CONFIG_SCSI_SATA_VITESSE) += libata.o sata_vsc.o
|
|
obj-$(CONFIG_SCSI_SATA_SIS) += libata.o sata_sis.o
|
|
obj-$(CONFIG_SCSI_SATA_SX4) += libata.o sata_sx4.o
|
|
obj-$(CONFIG_SCSI_SATA_NV) += libata.o sata_nv.o
|
|
obj-$(CONFIG_SCSI_SATA_ULI) += libata.o sata_uli.o
|
|
obj-$(CONFIG_SCSI_SATA_MV) += libata.o sata_mv.o
|
|
obj-$(CONFIG_SCSI_PDC_ADMA) += libata.o pdc_adma.o
|
|
|
|
obj-$(CONFIG_ARM) += arm/
|
|
|
|
obj-$(CONFIG_CHR_DEV_ST) += st.o
|
|
obj-$(CONFIG_CHR_DEV_OSST) += osst.o
|
|
obj-$(CONFIG_BLK_DEV_SD) += sd_mod.o
|
|
obj-$(CONFIG_BLK_DEV_SR) += sr_mod.o
|
|
obj-$(CONFIG_CHR_DEV_SG) += sg.o
|
|
obj-$(CONFIG_CHR_DEV_SCH) += ch.o
|
|
|
|
# This goes last, so that "real" scsi devices probe earlier
|
|
obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o
|
|
|
|
scsi_mod-y += scsi.o hosts.o scsi_ioctl.o constants.o \
|
|
scsicam.o scsi_error.o scsi_lib.o \
|
|
scsi_scan.o scsi_sysfs.o \
|
|
scsi_devinfo.o
|
|
scsi_mod-$(CONFIG_SYSCTL) += scsi_sysctl.o
|
|
scsi_mod-$(CONFIG_SCSI_PROC_FS) += scsi_proc.o
|
|
|
|
sd_mod-objs := sd.o
|
|
sr_mod-objs := sr.o sr_ioctl.o sr_vendor.o
|
|
ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
|
|
:= -DCONFIG_NCR53C8XX_PREFETCH -DSCSI_NCR_BIG_ENDIAN \
|
|
-DCONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
|
|
CFLAGS_ncr53c8xx.o := $(ncr53c8xx-flags-y) $(ncr53c8xx-flags-m)
|
|
zalon7xx-objs := zalon.o ncr53c8xx.o
|
|
NCR_Q720_mod-objs := NCR_Q720.o ncr53c8xx.o
|
|
libata-objs := libata-core.o libata-scsi.o libata-bmdma.o
|
|
oktagon_esp_mod-objs := oktagon_esp.o oktagon_io.o
|
|
|
|
# Files generated that shall be removed upon make clean
|
|
clean-files := 53c7xx_d.h 53c700_d.h \
|
|
53c7xx_u.h 53c700_u.h
|
|
|
|
$(obj)/53c7xx.o: $(obj)/53c7xx_d.h $(obj)/53c7xx_u.h
|
|
$(obj)/53c700.o $(MODVERDIR)/$(obj)/53c700.ver: $(obj)/53c700_d.h
|
|
|
|
# If you want to play with the firmware, uncomment
|
|
# GENERATE_FIRMWARE := 1
|
|
|
|
ifdef GENERATE_FIRMWARE
|
|
|
|
$(obj)/53c7xx_d.h: $(src)/53c7xx.scr $(src)/script_asm.pl
|
|
$(CPP) -traditional -DCHIP=710 - < $< | grep -v '^#' | $(PERL) -s $(src)/script_asm.pl -ncr7x0_family $@ $(@:_d.h=_u.h)
|
|
|
|
$(obj)/53c7xx_u.h: $(obj)/53c7xx_d.h
|
|
|
|
$(obj)/53c700_d.h: $(src)/53c700.scr $(src)/script_asm.pl
|
|
$(PERL) -s $(src)/script_asm.pl -ncr7x0_family $@ $(@:_d.h=_u.h) < $<
|
|
|
|
endif
|