kernel-ark/arch/powerpc/sysdev/uic.c
David Gibson 553fdff633 [POWERPC] Improve robustness of the UIC cascade handler
At present the cascade interrupt handler for the UIC (interrupt
controller on 4xx embedded chips) will misbehave badly if it is called
spuriously - that is if the handler is invoked when no interrupts are
asserted in the child UIC.

Although spurious interrupts shouldn't happen, it's good to behave
robustly if they do.  This patch does so by checking for and ignoring
spurious interrupts.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-08-17 11:02:06 +10:00

405 lines
9.9 KiB
C

/*
* arch/powerpc/sysdev/uic.c
*
* IBM PowerPC 4xx Universal Interrupt Controller
*
* Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/slab.h>
#include <linux/stddef.h>
#include <linux/sched.h>
#include <linux/signal.h>
#include <linux/sysdev.h>
#include <linux/device.h>
#include <linux/bootmem.h>
#include <linux/spinlock.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/prom.h>
#include <asm/dcr.h>
#define NR_UIC_INTS 32
#define UIC_SR 0x0
#define UIC_ER 0x2
#define UIC_CR 0x3
#define UIC_PR 0x4
#define UIC_TR 0x5
#define UIC_MSR 0x6
#define UIC_VR 0x7
#define UIC_VCR 0x8
#define uic_irq_to_hw(virq) (irq_map[virq].hwirq)
struct uic *primary_uic;
struct uic {
int index;
int dcrbase;
spinlock_t lock;
/* The remapper for this UIC */
struct irq_host *irqhost;
/* For secondary UICs, the cascade interrupt's irqaction */
struct irqaction cascade;
/* The device node of the interrupt controller */
struct device_node *of_node;
};
static void uic_unmask_irq(unsigned int virq)
{
struct uic *uic = get_irq_chip_data(virq);
unsigned int src = uic_irq_to_hw(virq);
unsigned long flags;
u32 er;
spin_lock_irqsave(&uic->lock, flags);
er = mfdcr(uic->dcrbase + UIC_ER);
er |= 1 << (31 - src);
mtdcr(uic->dcrbase + UIC_ER, er);
spin_unlock_irqrestore(&uic->lock, flags);
}
static void uic_mask_irq(unsigned int virq)
{
struct uic *uic = get_irq_chip_data(virq);
unsigned int src = uic_irq_to_hw(virq);
unsigned long flags;
u32 er;
spin_lock_irqsave(&uic->lock, flags);
er = mfdcr(uic->dcrbase + UIC_ER);
er &= ~(1 << (31 - src));
mtdcr(uic->dcrbase + UIC_ER, er);
spin_unlock_irqrestore(&uic->lock, flags);
}
static void uic_ack_irq(unsigned int virq)
{
struct uic *uic = get_irq_chip_data(virq);
unsigned int src = uic_irq_to_hw(virq);
unsigned long flags;
spin_lock_irqsave(&uic->lock, flags);
mtdcr(uic->dcrbase + UIC_SR, 1 << (31-src));
spin_unlock_irqrestore(&uic->lock, flags);
}
static int uic_set_irq_type(unsigned int virq, unsigned int flow_type)
{
struct uic *uic = get_irq_chip_data(virq);
unsigned int src = uic_irq_to_hw(virq);
struct irq_desc *desc = get_irq_desc(virq);
unsigned long flags;
int trigger, polarity;
u32 tr, pr, mask;
switch (flow_type & IRQ_TYPE_SENSE_MASK) {
case IRQ_TYPE_NONE:
uic_mask_irq(virq);
return 0;
case IRQ_TYPE_EDGE_RISING:
trigger = 1; polarity = 1;
break;
case IRQ_TYPE_EDGE_FALLING:
trigger = 1; polarity = 0;
break;
case IRQ_TYPE_LEVEL_HIGH:
trigger = 0; polarity = 1;
break;
case IRQ_TYPE_LEVEL_LOW:
trigger = 0; polarity = 0;
break;
default:
return -EINVAL;
}
mask = ~(1 << (31 - src));
spin_lock_irqsave(&uic->lock, flags);
tr = mfdcr(uic->dcrbase + UIC_TR);
pr = mfdcr(uic->dcrbase + UIC_PR);
tr = (tr & mask) | (trigger << (31-src));
pr = (pr & mask) | (polarity << (31-src));
mtdcr(uic->dcrbase + UIC_PR, pr);
mtdcr(uic->dcrbase + UIC_TR, tr);
desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
if (!trigger)
desc->status |= IRQ_LEVEL;
spin_unlock_irqrestore(&uic->lock, flags);
return 0;
}
static struct irq_chip uic_irq_chip = {
.typename = " UIC ",
.unmask = uic_unmask_irq,
.mask = uic_mask_irq,
/* .mask_ack = uic_mask_irq_and_ack, */
.ack = uic_ack_irq,
.set_type = uic_set_irq_type,
};
/**
* handle_uic_irq - irq flow handler for UIC
* @irq: the interrupt number
* @desc: the interrupt description structure for this irq
*
* This is modified version of the generic handle_level_irq() suitable
* for the UIC. On the UIC, acking (i.e. clearing the SR bit) a level
* irq will have no effect if the interrupt is still asserted by the
* device, even if the interrupt is already masked. Therefore, unlike
* the standard handle_level_irq(), we must ack the interrupt *after*
* invoking the ISR (which should have de-asserted the interrupt in
* the external source). For edge interrupts we ack at the beginning
* instead of the end, to keep the window in which we can miss an
* interrupt as small as possible.
*/
void fastcall handle_uic_irq(unsigned int irq, struct irq_desc *desc)
{
unsigned int cpu = smp_processor_id();
struct irqaction *action;
irqreturn_t action_ret;
spin_lock(&desc->lock);
if (desc->status & IRQ_LEVEL)
desc->chip->mask(irq);
else
desc->chip->mask_ack(irq);
if (unlikely(desc->status & IRQ_INPROGRESS))
goto out_unlock;
desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
kstat_cpu(cpu).irqs[irq]++;
/*
* If its disabled or no action available
* keep it masked and get out of here
*/
action = desc->action;
if (unlikely(!action || (desc->status & IRQ_DISABLED))) {
desc->status |= IRQ_PENDING;
goto out_unlock;
}
desc->status |= IRQ_INPROGRESS;
desc->status &= ~IRQ_PENDING;
spin_unlock(&desc->lock);
action_ret = handle_IRQ_event(irq, action);
spin_lock(&desc->lock);
desc->status &= ~IRQ_INPROGRESS;
if (desc->status & IRQ_LEVEL)
desc->chip->ack(irq);
if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
desc->chip->unmask(irq);
out_unlock:
spin_unlock(&desc->lock);
}
static int uic_host_match(struct irq_host *h, struct device_node *node)
{
struct uic *uic = h->host_data;
return uic->of_node == node;
}
static int uic_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
struct uic *uic = h->host_data;
set_irq_chip_data(virq, uic);
/* Despite the name, handle_level_irq() works for both level
* and edge irqs on UIC. FIXME: check this is correct */
set_irq_chip_and_handler(virq, &uic_irq_chip, handle_uic_irq);
/* Set default irq type */
set_irq_type(virq, IRQ_TYPE_NONE);
return 0;
}
static int uic_host_xlate(struct irq_host *h, struct device_node *ct,
u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_type)
{
/* UIC intspecs must have 2 cells */
BUG_ON(intsize != 2);
*out_hwirq = intspec[0];
*out_type = intspec[1];
return 0;
}
static struct irq_host_ops uic_host_ops = {
.match = uic_host_match,
.map = uic_host_map,
.xlate = uic_host_xlate,
};
irqreturn_t uic_cascade(int virq, void *data)
{
struct uic *uic = data;
u32 msr;
int src;
int subvirq;
msr = mfdcr(uic->dcrbase + UIC_MSR);
if (!msr) /* spurious interrupt */
return IRQ_HANDLED;
src = 32 - ffs(msr);
subvirq = irq_linear_revmap(uic->irqhost, src);
generic_handle_irq(subvirq);
return IRQ_HANDLED;
}
static struct uic * __init uic_init_one(struct device_node *node)
{
struct uic *uic;
const u32 *indexp, *dcrreg;
int len;
BUG_ON(! of_device_is_compatible(node, "ibm,uic"));
uic = alloc_bootmem(sizeof(*uic));
if (! uic)
return NULL; /* FIXME: panic? */
memset(uic, 0, sizeof(*uic));
spin_lock_init(&uic->lock);
uic->of_node = of_node_get(node);
indexp = of_get_property(node, "cell-index", &len);
if (!indexp || (len != sizeof(u32))) {
printk(KERN_ERR "uic: Device node %s has missing or invalid "
"cell-index property\n", node->full_name);
return NULL;
}
uic->index = *indexp;
dcrreg = of_get_property(node, "dcr-reg", &len);
if (!dcrreg || (len != 2*sizeof(u32))) {
printk(KERN_ERR "uic: Device node %s has missing or invalid "
"dcr-reg property\n", node->full_name);
return NULL;
}
uic->dcrbase = *dcrreg;
uic->irqhost = irq_alloc_host(IRQ_HOST_MAP_LINEAR, NR_UIC_INTS,
&uic_host_ops, -1);
if (! uic->irqhost) {
of_node_put(node);
return NULL; /* FIXME: panic? */
}
uic->irqhost->host_data = uic;
/* Start with all interrupts disabled, level and non-critical */
mtdcr(uic->dcrbase + UIC_ER, 0);
mtdcr(uic->dcrbase + UIC_CR, 0);
mtdcr(uic->dcrbase + UIC_TR, 0);
/* Clear any pending interrupts, in case the firmware left some */
mtdcr(uic->dcrbase + UIC_SR, 0xffffffff);
printk ("UIC%d (%d IRQ sources) at DCR 0x%x\n", uic->index,
NR_UIC_INTS, uic->dcrbase);
return uic;
}
void __init uic_init_tree(void)
{
struct device_node *np;
struct uic *uic;
const u32 *interrupts;
/* First locate and initialize the top-level UIC */
np = of_find_compatible_node(NULL, NULL, "ibm,uic");
while (np) {
interrupts = of_get_property(np, "interrupts", NULL);
if (! interrupts)
break;
np = of_find_compatible_node(np, NULL, "ibm,uic");
}
BUG_ON(!np); /* uic_init_tree() assumes there's a UIC as the
* top-level interrupt controller */
primary_uic = uic_init_one(np);
if (! primary_uic)
panic("Unable to initialize primary UIC %s\n", np->full_name);
irq_set_default_host(primary_uic->irqhost);
of_node_put(np);
/* The scan again for cascaded UICs */
np = of_find_compatible_node(NULL, NULL, "ibm,uic");
while (np) {
interrupts = of_get_property(np, "interrupts", NULL);
if (interrupts) {
/* Secondary UIC */
int cascade_virq;
int ret;
uic = uic_init_one(np);
if (! uic)
panic("Unable to initialize a secondary UIC %s\n",
np->full_name);
cascade_virq = irq_of_parse_and_map(np, 0);
uic->cascade.handler = uic_cascade;
uic->cascade.name = "UIC cascade";
uic->cascade.dev_id = uic;
ret = setup_irq(cascade_virq, &uic->cascade);
if (ret)
printk(KERN_ERR "Failed to setup_irq(%d) for "
"UIC%d cascade\n", cascade_virq,
uic->index);
/* FIXME: setup critical cascade?? */
}
np = of_find_compatible_node(np, NULL, "ibm,uic");
}
}
/* Return an interrupt vector or NO_IRQ if no interrupt is pending. */
unsigned int uic_get_irq(void)
{
u32 msr;
int src;
BUG_ON(! primary_uic);
msr = mfdcr(primary_uic->dcrbase + UIC_MSR);
src = 32 - ffs(msr);
return irq_linear_revmap(primary_uic->irqhost, src);
}